I have followed these instructions:
1. Go to Start -> Settings -> Connections Tab -> Connections.
2. You'll see 2 sets of option links. 'My ISP' and 'Work'. Under the work links, choose 'Add a new modem connection'.
3. Name for connection: o2 gprs. Modem: Cellular Line (GPRS). Tap Next.
4. Access Point Name: payandgo.o2.co.uk
5. Username: payandgo
6. Password: password
7. Tap Finish.
8. Back in the connections settings screen, tap 'Edit My Proxy Server'.
9. Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
10. In the proxy server box enter: 193.113.200.195
11. Tap OK.
12. Back in the connections settings screen, tap the Advanced tab.
13. Tap 'Select Networks'
14. In both drop down boxes choose 'Work' as the connection. Tap OK.
15. Tap OK again.
16. You are now ready to surf o2 pay as you go gprs full internet
In an attempt to get my GPRS to work with my pay as you go sim. However while i seem to be able to get some kind of connection eveytime I try and navigate to a page the connection times out. It is almost as though I am only getting access to wap and not GPRS however the G is showing up in the corner indicating that a GPRS connection is being made. Does anyone know the settings that will sort out the mess i am in, or have any ideas as to the cause of the problem?
Thanks,
Martin
Related
WM6 - WIZA300 - NBD 7.4
i know how to edit. . .
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter PictureMessaging in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select T-Mobile GPRS from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Tap OK.
14. Scroll to PictureMessaging and tap Set As Default.
15. Tap OK.
but i do not get the option of T-Mobile GPRS when i look at the drop-down box. Its just "Work, Internet, My ISP" etc...
Did you renames "My ISP" to "T-Mobile GPRS" when you set up the connection? Also, on #8 above, I believe that should be .50 not .050. Hope this helps.
ok, i added the connection, but it wants an access point name....
i dont have a dataplan, i just want to send MMS.
in need hw6955 english rom
in need hw6955 english rom
I can not beg, borrow or steal O2 to get settings for my Palm Treo 750 (windows mobile 5) to get on the internet! It is unlocked. I have tried various wap and password settings that I have found from them and online.
I have called O2 tech support which is really unimpressive because it seems they simply will not let you go up the ladder of support to get to someone that can answer the problem. I have been on palm.com website using online live support and palm says O2 must give the settings. O2 curiously tells me Palm must give me the settings. Anyone have any experience with this and know the settings? Know where to look? Me like you long time if you can help out.
thanks
I can give you my setting and it is not O2
You can ask O2 for the right setting.
and here it is:
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
Well, I hope it will help you...
hallo i am from greece!!! i dont know how to activate mms/wap i dont understand i have q if you know somethink tell me please!!! i have Q card its is the same company with wind
Sorry about my english!!!
here is a guide to my server .
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.
libal said:
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.
Click to expand...
Click to collapse
thank you!!!!! you are the best
it doesn't work!!! i dont know why
ATT MMS
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?
there is option to install palm sms software
shaunehannen said:
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?
Click to expand...
Click to collapse
http://rapidshare.com/files/99335294/threadedsms.rar
or
http://www.megaupload.com/?d=H63TXUP4
Hi to ALL,
I got a Treo 750 AT&T from a friend who got back from the U.S...Am now in the Philippines and am using a local network (SMART). I am having a problem however in sending MMS files. everytime i try, there is a prompt which says, "connecting to AT&T...GPRS and 3G... and then the MMS stays in the outbox folder..this happens everytime i try to send an MMS. It won't access to the Internet explorer either...the only thuing I can use is sending text messages...the rest of the functions won't work. I am confused now as to how am I gonna use my treo phone to its maximum features.. I hope somenoe can help me on this...
Thank you.
It seems your phone is trying to access Internet using connection settings for previous US operator. Did you make all the settings for your local network (Start > Settings > Connections > etc.)?
a guide how to do it
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: ____________ (ask your cell company)
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: _________ (ask your cell company)
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows __________ (ask your cell company)
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number _________ (ask your cell company)
12. Email center number is _____ (ask your cell company)
13. MMS gateway address is ___________ (ask your cell company)
14. MMS URL is http://xxx.xxx.xxx.xxx/servlets/mms (ask your cell company)
15. Finally under Network Profile select: My Work Network and then click ok.
Thank you very much for sending me this procedure to correct the setting of my mobile phone. I will coordinate with my Local network here in the Phils. to supply the needed settings.
Best regards,
Abrille
Dear All,
I have followed the instructions that you have given to me but still I couldn't access and/or browse the internet as well as receiving MMS format files. I tried to access and view some threads and I happened to see an email thread that gives an instruction on how to Re-flash/Unbrand a Palm Treo 750... I would like to ask your expertise Sirs if this is the next possible way or solution to solve the problem with my Treo 750? I hope someone can help me on this...thank you and more power to all.
Abrille
To access internet via Internet Explorer, you need the correct GPRS/WAP settings to tell it to use the right APN.
Try the settings listed here:
http://smart.com.ph/corporate/support/FAQs/GPRS+and+MMS+settings.htm
To set up a new GPRS connection profile use this:
http://www.microsoft.com/windowsmob...-cellular-grps-internet-connection-touch.aspx
Hi everyone..
I know radio performance varies greatly depending on your geographical location, but I use a smaller carrier that only operates in 1 state... (well, I can roam around the US, but only home area is 1 state)... After playing around with MANY roms & radios, this is what I found...
I am using a US Cellular branded Touch Pro 2....
I am using the "Energy.RHODCDMA.21911.Sense2.5.Cookie.Jul.24" rom w/ the "VZW_1.88.07WV" radio... I get the highest level of signal with this radio.. At home, I wa typicalls gettign 0-2 bars.. now I get 3-5... Also, as an added suprise.. my battery life has tripled (And I am still using it just as much, if not more).... I was very happily suprised and shocked... Also, the GPS seems to lock in pretty quickly too right out of the box....
You still need to manualyl set up your internet and MMS settings with this (and all) rom... and the settings are for the newest Airfire/Einstein settings...
first off, of course make sure you turn CDMA off and only GSM on... (not world phone mode)...
1. Start
>Settings
>Connections Tab
>Connections
2. Add New Connection
3. Enter name for connection “Airfire Internet”
>Under select modem select “Cellular Line (GPRS)”
>Next
4. Enter access point name> internet.air.net
>Next
5. Leave User name, Password and Domain all blank
> tap Finish
E-Mail
1. Start>Messaging
2. On messaging screen select Menu in bottom right corner and go to options
3. Select Outlook E-mail from list
4. Under server address enter> webmail.airadigm.com
>check the box for SSL connection
>Next
5. Enter in your user name and password for your e-mail
>enter airadigm under domain
>check box for save password
>Next
6. Select what you want your phone to sync with on your PC
> Finish
7. Start
>Settings>Connections tab> Comm Manager
>Turn on Data Connection and Microsoft Direct Push
8. Wait a few minutes and your e-mail should sync with your PC
MMS
1. Start> Messaging> SMS/MMS> Menu in right corner> MMS Options
2. Servers tab> New> Airfire MMS
>leave gateway blank> Port: 8080
>Server address: http://mms.airfiremobile.com/+1(10 digit number)
> Under Connect via select Airfire Internet
>Done Note: You must add the +1 before your number
3. When screen returns to the settings page after entering MMS settings set your MMS settings you just created as default.
I hope this helps everyone who has airfire... or even people just looking for a great rom/radio combination that gives good battery life!