For some reason my phone started showing the 'Unknown Publisher -security warning' , How can i stop this again please ???
I reflashed the rom but the warings are still there ..
Jonny_doe said:
For some reason my phone started showing the 'Unknown Publisher -security warning' , How can i stop this again please ???
I reflashed the rom but the warings are still there ..
Click to expand...
Click to collapse
download schap's advance config tool. It has an option to disable that when installing cabs.
Related
Hello there,
I have been lurking in this fourm for a while now.. great place...
now i updated my rom to 3.00a 32WWE that was just put up recently
I also upgraded my radio to 1.19.00
I have a proble finding an extended rom.... I can't find a extended rom for 2005 ... please help!
considering I do not have a extended rom on my device right now i expected alot of problems but i a getting a few.. one of which is very importants.. if not fixed i will need to roll back
I can't see my contact page for some reason.. opens and closes...
other errors happens when i do a soft reset
they are:
"The file 'BTIcon' cannot be opend, either it is not signed with a trusted certificate or one of its components cannot be found. you might need to reinstall or restore this file"
same error for file 'USSD'
and "SMSReciver'
and than it shows an empty stk service page
please help me...
Thank you
Observer
Hi, I've a vodefone v1240 (HTC Tornado), i've tried to flash wm6 flash to it... but... i haven't super cid unlock... the flash is ok but phone always star in muticolor screen (botloader screen), i've tried to flash a lot of flashes but always get invalid vendor id or "only upgrade"... i've tried too with TyphoonNbfTool to edit nbf and change vendor id.. but always get the same mensaje ("invalid vendor id" or "only upgrade")...
How can i recover my phone? :S
Thanks
Sendoa
Determine your original CID first, to do this type:
Code:
info 2
into mtty or teratermpro and paste the output in the thread
Phil
Ahh, there you are ! Are you or duke_Stix still planning to cook some newer ROMs or remove bugs from the existing one ? We hardly see you guys around there days
i get this... what is the original CID? ¿?
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3CE40000 Bytes
HTCSVODA0504 㱍dHTCE
Cmd>
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Changelog:
HTC Task Manager inc
HTC File Manager inc
Application Unlocked
Fixed WiFi
HTC Comm Manager inc
Removed Wireless Manager
Removed Debug Apps
Removed Marketplace
Removed Office
Removed Voice Command,
Removed Windows Update,
Added Bluetooth DUN support for TomTom compatibility
Added Bluetooth FTP protocol
Extra's (as a separate download)
Office
MMS (semi working)
HTC Clear Storage
Jeodek Java
Button fixes
xT9 (for those who prefer it over standard T9)
xT9 lang packs (split into separate languages)
TCPMP
wm5torage
VoIp
Localisations:
Polish
Czech
Russian
However at the moment I'm having issues with initflashfiles.dat, once these are sorted, it will probably be released the same day.
Back to the topic:
Ok, using typhoonnbftool v0.41 open up a tornado nbf (wm6 or official, it doesnt matter) and then edit the header data so that the Operator field reads:
Code:
VODA0504
That is your original CID
Then save the nbf and flash it to your device
Phil
done but...
Hi, i've done but... always get a "only upgrade"... only let me to reflash wm6 flash.. but it always return to bootloader screen :S what am i doing wrong? :S
Thanks anyway
Sendoa
Try adjusting the version numbers to something ridiculous like 99.99.99.99 as well
Phil
jm012a9749 said:
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Phil
Click to expand...
Click to collapse
Hey Phil, Thanks very much for the update ! Your hard work is much appreciated here !!
Me too
I'm having the same problem as Sendoa. I flashed the WM6 ROM to my 8310but after 100% completion, the phone re-started in bootloader mode.
I can flash it again with the WM6 but the same thing happens each time (bootloader mode). I've tried to flash with several other ROMs but each time I get the "Invalid Vendor ID" error before flashing begins.
I've tried the Typhoonnbftool tool to change the header as suggested earlier in this thread but without any success. My CID is 'DNG_0501'. I'm still stuck in bootloader mode.
I'd appreciate any assistance.
Thanks,
Straker.
Sorted
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Solved
Thanks to all
I flash it with a cingular flash with version changed to 79.79.79.79 and operator changed to VODA0504, and work again.. then i've unlock the cid and flash wm6 flash and it is working with it
Thanks again
Wow, that's cool, means I can flash my phone to WM6 without voiding my warranty ( I still got 5 months left )
lomanasq said:
Here, here they are:
cancer awareness ribbon
Click to expand...
Click to collapse
ban this MOTHA F**&&
Straker said:
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Click to expand...
Click to collapse
where did you get your flash from?
typhoonnbftool is creating only 1kb file of nk.nbf
Hi,
I have the new typhoonnbftool got it from sourceforge when i try to edit headers of a Imate rom to make it for xpa swisscom v1240 with the CID "VODA0505" i get only 1kb nbf file i try lots of thinks but no luck at all.
kind regards
Fakbrenjeri
Similar problem
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Small nbf
Straker,
Where did you get the rom that worked?
timwb said:
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Click to expand...
Click to collapse
use typhoon tools 0.4.1...
ftp://ftp.xda-developers.com/Uploads/Smartphone/Tornado/Shipped_Complete_Updates/I-mate
use the rom from here..
Stuck on BootLoader
I there!
I've tried everything that I could find here and still no luck...:-\
I've an SPV C600 and when I upload the Imate ROM it stays stuck on the BootLoader.
It only works if I upload the Orange Upgrade ROM...
I can't SuperCID it, since no app as worked till now...
What can I do?
Thank you!
try this:
http://forum.xda-developers.com/showthread.php?t=285344
I've bought this device just now and it was in german. I've upgraded the rom with this file: http://rapidshare.com/files/18878892/UK_11200_131_11210_ship.exe
I followed every step in the guide. It works now, i mean it's in English and everything, but it thinks it's an i-mate! The bootscreen has a huge i-mate logo on it and all the customizations are gone! When it boots up it tries to load some, but they are obviously not for this device because they do not work.
HELP!!
Phones cant think
Its a customised version of Config that you hve loaded.
Just go to Start -> Programs -> uto Configuration and select a carrier that you use / select Default
It will install the new customised settings and your phone will reboot.
You're done!
Uhm i can't really find anything like that in Programs. :-s could it be hiding somewhere?
hard reset the device after backing up data.
"Auto Configuration" option will be there on first startup.
you can choose your carrier from there.
Hi!
I need it to simply enabled or disabled the 3G.
Have you got something?
The perfect solution would be a "3G on/off" in Comm Manager?
A cab file exists for it?
Check Advanced Config.... you can change the Comm manager and have this button...
nickfranky said:
Hi!
I need it to simply enabled or disabled the 3G.
Have you got something?
The perfect solution would be a "3G on/off" in Comm Manager?
A cab file exists for it?
Click to expand...
Click to collapse
Hey this one!!
Advanced Config has also this possibility....
I've installed the Advanced Config Tool 3.3, but my problem still there...
I can put the 3G on/off in Com manager, but it is not active, if I tap on it, it didn't do anything ...
Am I miss something?
Advanced Config Tools "latest" 3.3 ver. in 10/27/2008 ???
Maybe this is the problem...
It's not working full functional on Topaz...
may be this is what u need.
http://forum.xda-developers.com/showthread.php?t=453518
BanSwitch
Or U try this tool...
It's running on my TD2 without any issues. U can find it at http://www.commmgrpro.com
It's not free but worth the money!
Regards
Frank
lovemeeveryone2009 said:
may be this is what u need.
http://forum.xda-developers.com/showthread.php?t=453518
Click to expand...
Click to collapse
That's it, you're my man!
Thanks
After searching desperately for the EUI 6 rom for this phone I found a Rom with root. I didn't get to try it because I thought it was fake or something. It said invalid sparse or something and waited a few more days to get the official EUI6 which I'm using right now. I found the modded Rom on 4pda and they claim that you can touch system partition without getting errors or baseband problem. There is also blue light led notification. There is a patch to disable thermal throttling and make the phone a lot smoother. They said it helped a lot but the download for the zip file is not found when I tried downloading it. They say the boot.img is from 27s. Can you guys help make a custom rom out of this. I want to try it but the most important for me is the thermal.zip file which is sadly not available. https. ://4pda.ru/forum/index.php?showtopic=895159&st= 2020#entry77308634
Let me clear this now that I am using the ROM. It does say that you can make changes to the system partition but it does not mean that you can root it. I tried with magisk and failed. The blue LED notification works. You can access engineer mode in settings. Baseband works. I installed UPM mod for performance but still it is not so good as we need that thermal.zip file to fix throttling. Even the simplest games or animations is going to lag on this phone. Face unlock is here and works well. Some LeEco apps are removed which gives more free ram but just a little bit. Notifications from apps work. Icons appear in the status bar instead of three dots. Color correction is available in settings. Google play is here by default. You can save contacts on Google. Nothing else extraordinary everything else is the same. I just need that thermal throttling fix. The folks over at 4PDA say that this file makes the phone a lot smoother but unfortunately for whatever reason it's not available. So far I changed my boot animation and installed UPM mod via recovery from PC.
There is a newer version available https://drive.google.com/file/d/1h0VsqO-V9jsxf1Pyv3muR1qoKuvSHunu/view.
It's much better. Try it.
It has a throttling manager in developer options but IDK how to use it and it also has a multi window mode. Idk how to use that also. I just discovered that it has buttons on the status bar on the extreme sides. The left side for multitask button and holding it does the user set action and the right side turns off the display and holding it shows the power off options.
It also has a brightness slider in the notification panel along with sliding quick toggles.
It has advanced settings for Dolby and no advertising in apps
is that work on le 650?
does this version work on LEX650? I tried to install it but it is stuck at "Compare product name and tool name"
Yes, it works on x650, x651, and x653
The new fastboot rom is here v04
https://drive.google.com/file/d/1589hbryYwF1lrVU0_yC6lHFfr6l314ut/view
thankx to kaito373 from 4pda
nightcap79 said:
Yes, it works on x650, x651, and x653
The new fastboot rom is here v04
.....
thankx to kaito373 from 4pda
Click to expand...
Click to collapse
The file is down also I have downloaded it before it was taken down but still can t install it, it is stuck like the last time on "waiting for any device". I don t have this problem with the stock one.
AnRussianBot said:
The file is down also I have downloaded it before it was taken down but still can t install it, it is stuck like the last time on "waiting for any device". I don t have this problem with the stock one.
Click to expand...
Click to collapse
For me it was a problem with drivers, in the device managers appears Android device, you have to choose manually the driver of bootloader interface of Google and it works, I'm using the ROM now and it's awesome.
can anyone update the link for v4? the link is down
Milkytea said:
can anyone update the link for v4? the link is down
Click to expand...
Click to collapse
I got the v3 if youre desperate and works mostly fine. Whats the difference between v3 and v4?
gomorin said:
For me it was a problem with drivers, in the device managers appears Android device, you have to choose manually the driver of bootloader interface of Google and it works, I'm using the ROM now and it's awesome.
Click to expand...
Click to collapse
I installed the google usb drivers but it didn t change anything ... .
Hi, the link for v4 is not working anymore.
Can someone please send the v4 ROM with ROOT? Thanks.
Pedrester said:
I got the v3 if youre desperate and works mostly fine. Whats the difference between v3 and v4?
Click to expand...
Click to collapse
V4 fixes some bugs. I think they are important ones. You can't share via Bluetooth, you can open a link or something that redirects you to another app. For example clicking a YouTube link in Gmail or Google chrome won't open YouTube and say something like LeTVshare has stopped. I think you can't use your Bluetooth headset also.
Link for v4 if anyone still needs (remove the spaces)
http s:// drive.google.com/file/d/1LPYZ4QmHvRwSRsG1nOwB3IqUXKvEBZM4/view