Hello there,
I have been lurking in this fourm for a while now.. great place...
now i updated my rom to 3.00a 32WWE that was just put up recently
I also upgraded my radio to 1.19.00
I have a proble finding an extended rom.... I can't find a extended rom for 2005 ... please help!
considering I do not have a extended rom on my device right now i expected alot of problems but i a getting a few.. one of which is very importants.. if not fixed i will need to roll back
I can't see my contact page for some reason.. opens and closes...
other errors happens when i do a soft reset
they are:
"The file 'BTIcon' cannot be opend, either it is not signed with a trusted certificate or one of its components cannot be found. you might need to reinstall or restore this file"
same error for file 'USSD'
and "SMSReciver'
and than it shows an empty stk service page
please help me...
Thank you
Observer
Related
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
step 1. Read more carefully the sticky post
user0000 said:
Hi, I apologize for probably asking something that's been asked before (note: I've tried to find the answer but no luck) but I'm a little confused.
I've flashed a downloaded ROM a few times but the original OS keeps coming up.
I've got a IMate KJam and would like to flash WM6 on it. I'll detail what's I've done.
1. I've run lokiwiz and seleced 'C' to do the CID unlock, seems to have worked (some locked and unlocked files got generated).
2. I've downloaded nbd.v7.4 and unpacked it.
3. I've run the standard ROMUpdateUtility Wizard that same in the zip file but it gave me "ERROR [300] : INVALID UPDATE TOOL"
4. I downloaded ROMUpdateUtility_Wizard_NoID.zip and ran the exe that was in the zip file, the good news is that the KJam resets to 'rainbow' mode and seems to update the flash - bar goes from 0-100% then resets.
Once reset the OS is the original WM5 that came with the KJam.
What did I miss? Again I'm sorry is this is answered elsewhere, I've just not been able to find a solution myself.
Thanks.
Click to expand...
Click to collapse
You're not unlocked. You actually skipped the first and very important step of flashing back to an older ROM to get your IPL/SPL to an earlier version.
Follow these instructions VERY carefully and don't skip over any parts at all. Read through it once or twice before starting any of the steps.
(these instructions are for G3 devices, for G4, go here)
Good luck!
Thanks for the help guys.I'm managed to come right with the ShellTools app.
The only problem I've had with WM6 is that when I click on the contacts soft button (or click it from the menu) it starts loading then disappears. I can't access it at all. Everything else seems fine though. Any ideas?
I remember that fault occurring with some of the roms though I dont specifically remember which rom, possibly some of the 318 builds. From memory I fixed this by doing another hard reset.
Thanks for al the assistance. I've flashed the XDA Mobile 6 Release 2a and am very happy.
WM6 has much much better wireless lan support. With the stock standard wm5 my kjam wouldn't connect to my WAP2 configured network, now it work! Great job on packing the Roms guys.
On the matter of the the contact not appearing / working. The following would happen: Once WM6 was flashed, and a hard reset done the usual process of initialization took place, which included screen alignment, time and time zone configuration, setting of a password and then the part that seemed to be causing the problems, the setting up for a email account/messageing. I on numerous occations skipped the setting up for email as I won't do email on the device. Once 'botted' the device would work fine with the new ROM the only problem would be that when I pressed the 'contacts' soft key or selected it from the menu the contact 'application' would seen to start up but die or6 not appear. This means that the title/top bar would display the title of the contact application but would in a fraction of a second die / abort / crash.
I assume that the email / messaging part of the hardboot startup sets up something that is required for the contacts application. Just for reference I just setup the email/messaging details (name, email address, pop server, username & password). After setup I didn't check email once, I then just deleted the email account setup and the contacts app is still working.
For newbees, I recommend the ShellTool applications, it allowed a new Wizard owner and newbee rom flasher to get a new rom flashed very easlily. My Wizard was a G4 with the 'recent' IPL/ISL bits so I can't speak for G3 users.
Nice one guys, great forum. I'm verry happy with my WM6 kjam.
Hi all,
Wonder if anyone had this issue already. I have a QTEK S200 which was originaly in german language. I have upgraded the ROM to get it in french.
Now, the MMS folder is missing . I have configured MMS correctly through the menu, but if I choose a GIF file or photo to and click " Send via MMS " nothing happens.
I have downloaded the file
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar which I used for the ROM upgrade.
I also tried the newer version,
RUU_Prophet_220737_2207117_024721_QTEK_FRE_Ship.exe
but I was not able to use it as I got the error " INVALID VENDOR ID "
Is anybody out there who could let me have a newer ROM version that I could use , or otherwise tell me how to "activate" again the MMS folder.
Thanks a lot and best regards
MMS folder does not exist anymore after ROM upgrade !!! SOLUTION FOUND !!!
Hi,
I found the solution to my above question ;-)
In fact I did a hard reset ( as discribedd in one of the threads ) so COMM button + CAMERA button + SOFT RESET with stylus and then CALL button. After that the device rebooted and started to install missing parts .... just wonder why these parts were not installed in the first place ....hmmmm
Anyway, after that , my MMS folder appeared again aswell as a few other tools .
Thats all folks.
Best regards
No joy... MMS icon still missing
No joy on the suggested reset to factory default. The MMS icon is still missing on my JAMIN Please help me. Thank you!
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Try finding the cab "sdkcerts.cab" to disable certificate checks and try it else reflash the rom once again and try.
fyi, the rom you're flashing is a WM6.0 build and NOT wm6.1
Fix?
Had the same issue, but it was related to a file that was removed from the windows directory search the ROM thread I think the file was something like olce?.dll to confirm its the same issue try installing isilo and see if the same error happens.
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
No, he’s just confused between WM 6.0 and WM 6.1 it did take me a while to realize I am not superman too.
WizP said:
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
Click to expand...
Click to collapse
firestormer said:
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Click to expand...
Click to collapse
Hi,
Just remove sddaemon.lnk from windows/startup folder.
(when in doubt, just paste this file elsewhere)
greetings,
Wout
I am getting the same thing. None of these "fixes" has any effect whatever. I thought this was a thread full of knowledgeable persons. Why all the stab-in-the-dark answers? Doesn't anybody know what REALLY causes this trouble?
hi all!
i must have f*d up somewhat here...my settings menu is gone, and when i try to open it via some "get started" link, i get something like:
"can't find the file mssettings..."
does anyone have that file, or know where it should be?
i have a swedish touch pro.
/hoffe
Same here - Must be contagious - Mine's swedish as well.
Ever get this figured out? I have the same problem but mines a US model. Im running SRXTEST3 STAR ROM (WM6.5). Tried several roms but get the same issue with ":mssettings". Never tried it with the stock rom from sprint.
I may be able to get this fixed if i can get someone that has :mssettings working to check thier registry for it in
HKLM\Software\Microsoft\Shell\Rai Should be a entry, please export and upload! PLEASE!!!
Hello guys i have a problem with my HTC HD7...i install the 8112 update then 8773 with languages ( from here http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929 ) but without a backup ... "C:/ no space" and all goes right.. but when the phone was on the start screen and go to settings: "wifi, emails+accounts, messaging, about phone" - doesn't work
I tried to install O2-DE ROM's ( from here http://forum.xda-developers.com/showthread.php?t=1000467 ) and i get the [226] error - flash write , i tried to install a DFT ROM but SPL-5x.. and doesn't support it... please guys i am new in ROM's and stuff's and i am really desperate and don't know what to do to fix my phone.. if you can send me a good custom ROM or someone who fixed the [266] error please help.. and just in case if someone has a mango BACKUP and it can be send... via link that would be awesome
Thanx
Sorry for bad english.
Why did you start a new thread for this? This should be part of the CAB Update thread.
Your problem is very obvious if you just read the instructions for CAB updating. You needed to send the language packs along with your OS update. Language packs are in their own CAB files, but can be sent at the same time as the update CAB. There are instructions for figuring out which ones you need to send.
You're messing with things here that can really screw up your phone, much worse than it is now. *ALWAYS* read the instructions first. Read what problems others have had, and how they fixed them. Follow the steps, don't cut corners.
That said, if you really want to install a custom ROM, this is possible. You'll need a GoldCard, which is to say a USB Mass Storage device like a SD card or a flashdrive with a special file on it, plus some way to connect it directly to your phone and power the device at the same time (typically a USB Y-cable). There are full instructions, with links to parts and pictures of how to set it up, available on this forum. That will let you downgrade your bootloader version so you can install HSPL.
Phone status: Updated
Problem solved, finally i upgraded my HTC HD7 to 8773 by reinstall the 8112, 8773 again +languages and it worked
-So for those who think that their phones are lost (Walshed) repeat this step 1-2 times