Hello together, I tried to install the SD Dual Boot Method Openmoko on my device! After I follow these steps (written here: http://grigio.org/howto_openmoko_htc_magician_s100_dual_boot_wince) and start the first time, i saw that the system is booting, but than its hang! I tried to reset but it does not function. Then i put the battery out and after 1 min i put the battery again in the HTC!
The HTC Magician is not responding!
I see only a black screen and hear a "klick" if i would enter the bootloader, sounds like the speaker! I need rely Help!!!!!!!
If i connect it with the usb, to charge the battery only the red led is turned on, i can't access the bootloader, the device is dead!!!!!!!
please Help me!!!!!!!!!!!
Thank you!!!!!
The red light is on?
==> This means that the battery is fully discharged. I assume you have not used the device for a long time?
Keep it attached to the charger for 10 minutes and everything should be fine again!
Hello schlot,
Thank you for you Reply, but i recharge the battery befor i start Linux, but now it ist really low!
Now i recharge it again it is fine, so wm200se works!!!!!!!!! BIG THX you really help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
another question: where is the bootloader stored, in wich device (EEPROM), can in programm it witch a programmer to unbrick the htc, is this possible???
i love this forum! ;-)
Related
Hi,
I update my Prophet to RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
But I was not happy because the camera didn't work, I try to go back to
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
But it retruns errors after 95% of the update that my nbf files is not correct,
then I install AKU2.3.1_LvsW_Edition_2006-11-28
But after the flash finish my prophet just show we the bootloader... I unplugged the battery and now my device don't starts, sometimes if I connect it to the USB port of my laptop after few minutes, the bootloader appears but it just stay 10 or 30 seconds and then disappear again. I can't flash anymore.
Anyone has similar issue? Otherwise I will have to send it back to factory.
I already try hard reset, and bootloader access (camera + reset)
Thank you
Otherwise I will have to send it back to factory.
Click to expand...
Click to collapse
Can you do that without losing anything? if yes... id go for it ASAP
I am sorry, I don't understand waht you mean?
One more information, when plugin my prophet to USB, the LED doesn't comes orange. I would really suggest that some hardware part is defect but I flash my device several times and I never had such problem.
Thanks to anyone.
maybe,... if you are lucky this solution for another problem helps you:
http://forum.xda-developers.com/showthread.php?t=292667 kann you get into the bootloader if your charger is plugged in?
thank you ! I could flash my prophet again!!!
So,i upgraded my i-mate jamin whit touchflow 3d lookII,and before the upgrade is finish i got a message: update error!!!!!!!!!! And now my pda is dead,no flashing the led when i connecting the pc,and if i want to run the original rom back the program say:connection error! I can't do hard reset because my pda don't want switch on!
Please if somebody can,help me.
play007 said:
So,i upgraded my i-mate jamin whit touchflow 3d lookII,and before the upgrade is finish i got a message: update error!!!!!!!!!! And now my pda is dead,no flashing the led when i connecting the pc,and if i want to run the original rom back the program say:connection error! I can't do hard reset because my pda don't want switch on!
Please if somebody can,help me.
Click to expand...
Click to collapse
wait we need more Details id you try leaving the phone charging then take battry out and put it back in? also does the Device power on? I mean do you see the qtex screen you know the boot screen? also try putting it in bootloader mode then flash
__________________
Thank you very much for your help.I tried everything, which you wrote, already. I cannot switch the device on. If I put it on a charger then sometimes automatically onto 2-3 seconds the bootloader appears,afterwards turns off.
He responds to nothing without a charger.Sorry for my bad english.
play007 said:
Thank you very much for your help.I tried everything, which you wrote, already. I cannot switch the device on. If I put it on a charger then sometimes automatically onto 2-3 seconds the bootloader appears,afterwards turns off.
He responds to nothing without a charger.Sorry for my bad english.
Click to expand...
Click to collapse
My Prophet has same symptom as yours. After 2 nights of charing, it now turns to charging light on all the time, no bootloader screen. After charging 1 day, it still on charging lamp. still cannot turn on, still cannot connect with PC.
what happens
Hi guys!
I flashed back Tomal's 8.5 and I was installing my applications. Everything was working good.
But, after a soft-reset required by an application, the screen remained black. No turn on, nothing at all.
If I plug in usb the charging led won't turn on.
If I remove the battery and put the usb cable in, the led turns red.
I can't enter in bootloader mode.
The only thing that seems to go is the hard reset: I can get the white screen with the question "x to exit..." but nothing more!
What can I do?
Thanks...
Hey.
You have to do DOC FORMAT.
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
I tried it, but I cannot enter in bootloader mode, I can only enter in hardreset dialog and my Uni isn't recognized by XP...
Hi!
My Xda Exec is dead I flash Tomal ROM and the next moment my phone is black srceen. I tried it to hard reset but nothing resoult. The PDA enter the boot loader mode but my PC is not connected the PDA. The pda screen "USB V1.01".
Help me
(Sorry I can from hungary...)
If you can enter in bootloader mode there's a chance to format it. Read the wiki.
My problem is that I can't even enter in bootloader!
Auzman said:
If you can enter in bootloader mode there's a chance to format it. Read the wiki.
My problem is that I can't even enter in bootloader!
Click to expand...
Click to collapse
Yes i think. But "USB port can not open.".
I suppose you tried also this method...
If so, and nothing happened, I'm sorry, but I have no other ideas for you...
Problem solved!
I left my Uni without battery for few hours (don't know how it helped), I tried again with a fully charged battery and I've been able to get into bootloader.
I made a DOC format and reinstalled Master Tomal's rom.
Everything working well now...
Thanks!
hello my att tilt has a white screen i´have tried everything and when i say everything it means that,,,, ok last night when i was triyng to update my 8925 it gave me a white screen so i put it in bootloader and try to flash the att rom but i couldn´t.... so i read wiki and i did mtty or something like that but now my tilt doesn´t show anything it´s dead if i turn it on the only thing it shows is a white screen and if i put it on bootloader it´s the same i can´t get my tilt to load anything...... i also tried the thing with the micro sd card but it doesn´t load anything...... like on the other methods only shows 0% and then nothing happens
wellllll I´m sorry my english it´s not so good and please help
helpppppppppp
hard reast plz
and then try to flash from sd - if u dont know how read the noob seaction
if it dont work
buy new one.... sorry
Wow that's a lot of icons on your desktop.
It sounds like you don't have HardSPL on it. But did you also run the program as administrator?
i did everything that you told me to do (flash from sd card) and yes i´m running as administrador
the phone turns on but only a white screen appears and i have installed HardSPL but now i try to reinstalle and doesn´t work
hello i´m waiting for help
The first and most important thing before doing anything with your phone is read a lot and understand. If English is not your native, then find someone that understand to explain to you.
Doing a flash without preparation and fully understanding what's happening on the phone is the same as suicide. See this example: http://forum.xda-developers.com/showthread.php?t=606739
Ok guys, i'm in trouble trying to fix this great mistake. I'm new in android programming, and i bricked my device a few times, but i managed to fix it out. But that time, i was trying to reinstall Cyanogenmod 12.1 on my device. It was working well, but i had to flash an app, and it bootlooped. I forgot that i had only about 16% of battery. In adb, fastboot mode, i erased /system and /boot, but when i tried to flash the boot.img, it haven't worked, because in the device blocks from flashing with low battery. So, im trying the .bat method now, trying to charge it, and the method of plugging in wall charger and connect to pc don't worked, because i disconnect, with "Battery OK" and when i connect in USB, it changed to "Battery Low (Charging)". But now, in wall charger, i didn't get even the "Battery OK". Today i noted that when i connected in USB, the "Battery icon" appeared with 0% , and the screen gone off. Initiates, and deactivated very fast. When i try to initiate device, the "Motorola" logo appears very fast before it go to the fastboot. I really dont know what to do, and i dont have the tools to open my Moto G, and i have no idea of where to find it. Any help would be appreciated. Thanks.
PS.: Sorry by my english, i'm from Brazil.
PS²: Sorry if i don't have posted in the right place. It's my first topic.
Ok Guys, i've simply opened the phone and connected the battery to an old charger, and waited a few minutes until it had enough charge to reflash partitions. Thanks anyway, guys!