Samsung BJII charging via USB - Non-Touchscreen Windows Mobile Other

Hello all,
I recently received a BJII and upgraded it to WM6.1... and noticed that when the phone is connected via USB it only charges for about 2 minutes and then stops charging! ActiveSync 4.5 syncs just fine and remains connected the entire time. If I disconnect the phone and then reconnect it, it again charges for a few minutes and then stops again! Is there a reg setting for this or something? Many thanks...

Related

USB Activesync cable, not detecting phone but charging...

Besides my cradle, I have an activesync cable (USB on one end & connector for my XDA II unit on the other end). I've been using it for quite sometime now, until one day it stopped detecting my phone, I can no longer synchronize on my unit...but the thing is, it can still charge my XDA II.
I can activesync with my cradle...so does this mean that my activesync cable is the one defective? What are the possible solution, Im looking for a diagram for this interface, there must be a loose connection on my cable.
Re: USB Activesync cable, not detecting phone but charging..
kaleidoscopelex said:
Besides my cradle, I have an activesync cable (USB on one end & connector for my XDA II unit on the other end). I've been using it for quite sometime now, until one day it stopped detecting my phone, I can no longer synchronize on my unit...but the thing is, it can still charge my XDA II.
I can activesync with my cradle...so does this mean that my activesync cable is the one defective? What are the possible solution, Im looking for a diagram for this interface, there must be a loose connection on my cable.
Click to expand...
Click to collapse
What OS are you using?
If WM5 - there are several Threads about XDAII with WM5 having problems to sync via USB (I have this (unsolved) problem, too).
(Have a lokk at www.buzzdev.net, too)
So: no solution, but at leat an assurance that there is no hardware problem.
regards
Shrek3K
kaleidoscopelex said:
Besides my cradle, I have an activesync cable (USB on one end & connector for my XDA II unit on the other end). I've been using it for quite sometime now, until one day it stopped detecting my phone, I can no longer synchronize on my unit...but the thing is, it can still charge my XDA II.
I can activesync with my cradle...so does this mean that my activesync cable is the one defective? What are the possible solution, Im looking for a diagram for this interface, there must be a loose connection on my cable.
Click to expand...
Click to collapse
I turn of firewall of pc windows xp.
I experience the same problem too.
Try re-installing the ActiveSync. This worked for me.
I installed the WM 6.1 about one month ago and everything was fine until recently. Has anyone been able to find a solution for this? mine started doing this about three days ago. I was syncing fine just last week!!
(edited, I´ll move it to a proper place)
Have you tried disabling the advanced network functionality option?
I'm having the same problems too.
It all worked fine. 1 day it stopped working. I've removed the partnerships and uninstalled ActiveSync, installed again, reboot both devices. Started working.
Now it stopped working again!
I've got a HTC TyTN
Help...!
I've the exact same problem with me Raphael with RomEOS WM6.1. It won't work on Vista or XP, tried all the standard stuff and tried it on a fresh computer with Vista. Seems to be a WM6.1 or ROM issue.
I'm looking for instalation files for ActiveSync on WM6.1, but can't find any.
Where we can find ActiveSync ROM cab file so that we can install on Mobile again.
Since ActiveSync on mobile is not working as I have to 2 phones
1) HTC Tytn II (Not Working)
2) O2 Atom ( Working )
with same usb cable and same desktop or laptop.
can anyone help where we can get a activeSync Installer for phone.
I have the same problem, I am running WM5 on an Eten Om600+ and Vista no my laptop.
the phone charges, but there is not communication between computer and phone. all was fine, till one day... no sync no more.
Any suggestions?
bushido1 said:
Have you tried disabling the advanced network functionality option?
Click to expand...
Click to collapse
where do i find that?
ok Im having the same problem here with my Titan.. how did you all get it to work again?
i got a SPV M1000. one cradle and one USB cable. I prefer using USB cable to cradle. I got same problem as you with my USB cable. USB cable can charge but can not synch. I dismantled my USB cable and found out that. one data tag(pin) was loose. and people should know that. USB cable have 22 tags(pins): 2,5,16,17,18 are connect to (-) negative and 13,20,21,22 (+) positive. the tag number 14 and 15 is the date line. If one of 14 or 15 tag is loosen(mean it donot touch to your ppc when you plug the cable in) then your ppc only can charge and cannot synch. So, I pushed the tag 14th on my cable back, seal with some superglue. after that, my usb cable work again until now.
by the way, i disconnected the pin number 20,21,22 from (+) positive. disconnect one data pin ( 14 or 15). after that, my USB cable can be used to charge my PPC through PC or the any chargers with voltage >5V. is that usefull huh?. and when i want to Synch, i reconect that pins again. for more convenient, i do it with a Switch with 2 poles.

ActiveSync in continual loop

I am running mfrazzz's XM6r5 on my 8125 (AS4.5). Everything has been performing perfectly until a few days ago I noticed whenever I connect USB to my computer, Activesync fires, and then as soon as it is complete, it syncs again continuously.
I changed the registry to only sync manually, and even that did not fix the problem.
If I stop the sync it will lie idle for a few minutes, but then once it starts to sync again, the same behavior occurs.
Any ideas would be appreciated
update to issue
Just to eliminate as many variables as possible, I hard reset back to button ROM and connected to the USB cable. I had the same symptom of continual active syncs. Could this be a hardware issue - bad USB connector on my 8125? I tried a different USB cable also same result....
Help!!
same thing happens to me-I just have to keep closing it.Battery last less than a day

Displays turns on every 30s when connected with activesync (samsung i600)

Hi, have any of you encountered this? When I turn activesync on on my samsung i600, the display turns on every 30 seconds for 10s. I don't like it, because is distracting, and when connected through bluetooth, the battery gets depleted very fast because of diaply turning on.
ActiveSync synchronizes data every 5 minutes, so it isn't the cause.
A device is newly flashed, and it does this even if I turn off all programs.
Have it happened to anyone? Did you solve it?

Samsung BJII charging bia USB

Hello all,
I recently received a BJII and upgraded it to WM6.1... and noticed that when the phone is connected via USB it only charges for about 2 minutes and then stops charging! ActiveSync 4.5 syncs just fine and remains connected the entire time. If I disconnect the phone and then reconnect it, it again charges for a few minutes and then stops again! Is there a reg setting for this or something? Many thanks...

Syncing but not charging

Recently my TC2 has stopped charging from the USB connected to the computer. It is recognised and still syncs. When I do it from a plug direct, or from car charger, it charges?
I am using MS Vista, so could it be a "fix" that has been automatically downloaded or is it a problem with the device? I have checked the cable, replaced it, and moved it to a differnet USB port but to no avail. I have also checked the ports in device manager and they all appearto be running correctly.
Anyone have any thoughts?
Thanks
In your power settings have you got "when device is turned on do not charge battery when connected to pc" make sure it's not checked.
Doh! How simple I don't know how I missed that.
Thanks very much for that meknb.

Categories

Resources