Problems with Winmobile torrent - 8125, K-JAM, P4300, MDA Vario ROM Development

Hi,
I am using HTC Wizard with SNN edition WM6 ROM, I installed the Winmobile Wintorrent on my device, but whenever I use it - the display turns off (as per the power and display settings on the device) and I cannot make the display to turn on. The green indicator blinks confirming that the phone is alive, but the display and the buttons do not respond. This only happens when the device goes in standby mode (if I keep playing with my device while the winmobile torrent is running, it works fine) While the display and buttons were not responding, I used my friend's mobile to call my device to check if it brings up the display, the phone kept on ringing but nothing showed up on my mobile.
I always have to soft reset my phone using the pinhole and when it loads up the windows, I can see that the battery level has dropped significantly. When the Winmobile torrent was running, the battery level was 88% and within 10 minutes, it dropped down to 18% after the soft reset.
Can someone help me?

Related

My Himalaya not responding after sometime I turn it off

I flash the my hima with the TofClock 2.01a32WWE ROM, and it works fine, and I'm very glad with it.
But now, some time I turn off my hima by pressing the power button, the screen went black, after a while, I want to light it to operate, the hima keeping black, and the hima cannot operate any more, and I tried to call my phone(hima), the hima didn't ringing. Also, SMS, MMS, all function dead. But the same time, the 2 leds, Blue and Green/Red, flash like normal.
At this time, the only way to operate hima normally was soft-reset it by press the hole with my pen.
:shock: :shock: :shock: :shock:
Is there someone experience this situation, and is there some way to solve the problem.
:idea: :idea:
ps: in the Settings --> System --> Power --> Advanced page, the 2 options can set "Turn off device if not used for" some minutes, when "turn off" time out, the same problem occurs like above, I called it Auto Turn Off
My device is Dopod 696 (Maybe Chinese mainland version of O2 XDA II).
:wink: :wink:
I also experienced similar problems, but with the 64 version.
After a while, when I tried to turn it back on, it began to act strange. First the automatic turn off backlight option was every time reset to 10 sec and then after a day or 2 I noticed that the screen was sometimes still showing some black lines. Changing the volume still gave the corresponding sounds, but nothing else seemed to work (or wasn't visible). Normal operating mode was only reinstated after a soft-reset.
I gave it a hard reset and restored a backup (using SPB). It's operating again, but it already contains the 10 sec change.
So probably have to start clean again and install everything from the beginning, but before I do I would like to make sure it will not happen again.
Appears like the Power Off option is screwed, no matter in which way I use it (button or a program).
Anyone have any thoughts on it?
zplei
yes, i have same problem on my O2 XDA ATOM
with last rom and other
I have the same problem too, the only ay to have it back is softreset
i was using spb to toggle display mode.
someone said can be solve by reegedit. but how to.
anyone found a solution..?

VOX Getting shut down automatically

Hi,
My VOX sometimes gets shutdown automatically. It happens at least once in two days. And whenever it shutsdown, I can feel that the handset has become slightly hot. I need to remove the battery and put it back to turn on the phone again.
But one strange thing I noticed is that, if the bluetooth was on when the phone went down, I can see the bluelight blinking even when the phone seems to be shutdown.
Do you guys know what could be causing this?
My Radio Version is 4..13.41_02.88.90 and OS is 5.2.1236 (Build 17741.0.2.1)
Thanks pals!
Sounds like it's over-heating possibly? If the BT LED is blinking blue, then the device is still on, I think you have some software that is either causing it to run at full load or causing a soft reset.
hum, maybe this has something to do with the problem already reported in some posts of some VOX's
the screen goes black, but the phone remains on
normaly if you wait a couple of seconds, and try to mess with the phone again, it will be alright,
sometimes i even have to remove the battery
some say the problem could be overheating as u say, but until now, i havent found any solution for this, i also am facing the same problem
Same problem for me when turning on the Wifi, but the phone turns off completly and the battery showing empty after turning the phone on, I have to remove the battery each time!
But when it's connected, my phone runs perfectly.
Maybe I have to change my battery, no?
I don't think in my case the phone is on (except for BT light blinking). Otherwise it should be in a big hung state where it is not able to respond to keyboards, power key or any interface at all.
Next time I encounter this problem, I will try calling my own number to see whether the radio is on.
I have been using this vox since last 8 months, but in the last couple of months I have encountered quite a lot of problems like radio repeatedly getting turned off, first call after restart hanging (not consistent but happens most of the time I restart the phone and try to make calls with in the first 20 seconds after bootup) etc.
Do you think an upgrade 6.1 would do any good?
Thanks again!!
I was having that problem too. I tried upgrading to WM6.1 and upgrading the radio, nothing worked. I sent it in and they replaced the mainboard, but now it seems to be worse. I just got it back though, so I haven't called them about it yet. I'm just looking around to see if it could be a battery issue.
My phone restart issue was mainly a hardware or loose contact issue. Once the phone fell down and after that whenever there was a long press on 0, * or # keys, the phone would restart.
After two days my phone fell down once again from my hand and this issue got resolved forever. Lucky me!
My S710 HTC original, shut down every day at 00.16. In the past was at 02.46, and I discover it since during my trip in asia I found the phone off.
More over the alarm is not reliable and cannot be used for this reason.
The following application are installed:
- Customisation from HTC for my operator TIM
- microsoft Office mobile upt
- pmCleanSP
- spWZTools
- Skype
- Tom Tom
HTC service told me to flash it with Rom update.
Any suggestions?
Thanks

Tytn II (WM 6) and Keeping The Backlight Going When Using the Phone

I am the proud new owner of a bog standard (unflashed) Tytn II running WM 6 Pro. By and large fairly happy with the device except . . .
When I use the phone (and only when using the phone) the screen dims after about 8 seconds and blanks out after about 14 seconds. This gets very annoying when I am checking messages as by the time I have listened to a message and need to delete it the screen has blanked out and I have to hit the power button to bring the screen back up.
I have checked all the obvious culprits and set my backlight preferences to a suitably long time but the screen behaviour when I use the hone (and only the phone) is the same - within 15 seconds the screen has shut down completely.
Any suggestions on how to fix?
Have U checked settings>system>power>advanced timeouts?
Also, there is a forum section for the tytn 2 with a lot of info...
http://forum.xda-developers.com/forumdisplay.php?f=376

HTC Diamond - backlight not off after inactivity - just fading out a little

Ok so I have a little problem with my HTC Diamond. In options I set to turn-off the backlight after 10s of inactivity which is standard. The problem is that after those 10s I can see that the screen backlight is fading out but it doesn't fade out completly - if you look from an angle it might appear that it's off but if you look at the front of the phone or simply in the dark you can see that the backlight is still on only set to something near 10 or 5%. As you know the battery just sucks in this device and I don't want the backlight to drain it so any ideas or tips on this matter? Of course I can put the phone to sleep mode but I'd just prefer to make the backlight turning off so I can take a look at the screen to for example check the time without having to press any buttons...
Same problem here
After those 10s the screen is not turning off completly, just fading to 5, 10 %. The screen with all the info, the home page let us say, is still visible and drains the battery. I also could just press the power button to turn is completly off, but I would also prefer it to do this manually after ten second.
Did you find a solution to this problem yet?
Help Battery Drain
Same thing here, and my Backlight is stuck to 100% i think,
anyone found a solution to this? any hints?
Guys, i assume youve set the "turn off device if not used for xxx mins" correctly whilst in battery and external power correctly?
If you have, what roms are you using as you give us no information to help any further
Hello,
I had the same problem with ROM 2.03.421.2, date 12/24/08.Back then I had SPB mobile shell installed and a very few applications and I couldn't find the problem. I made a hard reset so now, with nothing installed, the device also enters standby. You should take care because it is possible that the device is not entering standby either and it is making calls. When I had this problem my friends were complaining that I kept calling them and not talking. It is strange as I'm sure I put the device to sleep with the power button. But still, somehow, it was making calls...

[Q] Totally bricked Kaiser!

Hi XDA-devs!
I've been going through this forum for quite a while now, but sadly I haven't been able to find the answer to my problem
I got a Kaiser 130 which isn't performing very well, actually it isn't performing at all.
Here is the problem:
Fully charged battery (not the problem)
I go push the powerbutton
Green light comes on and no more than that.
What I've tried so far:
Pulled the battery
Pulled the battery and pressed Power for more than 30 seconds.
Pushed the reset button while on (Turns out the green light)
Reset + Cam + Power (Turns it on again)
Power + Softkeys (Turns out the green light)
All sorts of battery dismounting and mounting, which suddenly gave a blink of a red light for a change.
Well this can be fixed! (initial thought)
BUT
I am unable to make the device do anything at all when it comes to USB connections in the way that the device gives no indication to Windows or Linux at all, so how am I supposed to get through to the device with frankenkaiser, MTTY or anything else?
It gives no indication to Active Sync, Windows Mobile Device Center or "The upgrade to WM6.1" HTC program.
The USB-connection is just not working!
The phone looks perfect and has never been used, but has been bricked for more than 2 years before I got my hands on it. It comes from an institution and was never used because it didn't work, so no damage has occoured.
It holds the original rom and has never been modded or anything.
So is this device simply out of my reach or am I missing something?
Derduden said:
Hi XDA-devs!
I've been going through this forum for quite a while now, but sadly I haven't been able to find the answer to my problem
I got a Kaiser 130 which isn't performing very well, actually it isn't performing at all.
Here is the problem:
Fully charged battery (not the problem)
I go push the powerbutton
Green light comes on and no more than that.
What I've tried so far:
Pulled the battery
Pulled the battery and pressed Power for more than 30 seconds.
Pushed the reset button while on (Turns out the green light)
Reset + Cam + Power (Turns it on again)
Power + Softkeys (Turns out the green light)
All sorts of battery dismounting and mounting, which suddenly gave a blink of a red light for a change.
Well this can be fixed! (initial thought)
BUT
I am unable to make the device do anything at all when it comes to USB connections in the way that the device gives no indication to Windows or Linux at all, so how am I supposed to get through to the device with frankenkaiser, MTTY or anything else?
It gives no indication to Active Sync, Windows Mobile Device Center or "The upgrade to WM6.1" HTC program.
The USB-connection is just not working!
The phone looks perfect and has never been used, but has been bricked for more than 2 years before I got my hands on it. It comes from an institution and was never used because it didn't work, so no damage has occoured.
It holds the original rom and has never been modded or anything.
So is this device simply out of my reach or am I missing something?
Click to expand...
Click to collapse
try HARD RESET after power on. tat saved mine two days ago

Categories

Resources