hi all
i was using the Dutty's DualTouch v1.1 Rom in my phone than i made update to Duttys DualTouch V3 Final and i faced a problem the program menu without icons ...!!!
i attached the pic if there is anybady can help me ...
thanks for all
Hi,
did you do a hard reset after installing it for the first time? it usually solves certain issues related to that.
Well, at least it did for me. try a it.
sunstorm said:
Hi,
did you do a hard reset after installing it for the first time? it usually solves certain issues related to that.
Well, at least it did for me. try a it.
Click to expand...
Click to collapse
Exactly what I would recommend. Good post sunstorm!
i will try and i will tell u...thnx
after the hardreset ,,every things is ok....for one day ,ido him softreset the same problem back...do i have to go back to the old rom or what ....
Hi sayyas,
maybe you might want to post a list of apps which you have installed on top of Dutty's V3. I'm sure that somebody will come along with prior experience with the same or similar app list and tell you about the necessary rectifications necessary for the apps and the rom to function properly. I'm suspecting a simple case of conflict in installed apps?
For instance, did you try to install the latest version of HTC Home on top of the one installed with the rom? I know that it will take a bit of tweaking and a dll replacement before the necessary verification checks are bypassed for the plugin to work on the kaiser as the latest version was actually written for the polaris, iirc. that being said, the mentioned app is just one of my experiences and seriously, an issue separate from Dutty's finely cooked rom.
hope this will help us to help you.
After I flash my Tilt with a Non-AT&T Rom, the keyboard is messed up especially the Function keys (they get reverted to the kaiser keys instead of the tilt keys)
Now, I have tried all the fixes including the Tilt Keyboard Fix, Disabling XT9, etc etc but that problem never gets resolved.
I have noticed that whenever I do a soft reset, all the settings get reset on the tilt for some reason because the stupid notification asking me to configure network settings via OTA comes back up even through I disable it, is that what's causing the keyboard not getting fixed or something else?
please help, thanks.
Rom Specific
Sometimes the issue is ROM specific.
Which custom ROM are you using?
if you apply both the tilt keyboard fix and use another utility to change your keyboard, you will have problems.
If you chose not to read at least be more specific and you might get some help.
you are not the first person to have this problem with their tilt.
mzahiri said:
Sometimes the issue is ROM specific.
Which custom ROM are you using?
if you apply both the tilt keyboard fix and use another utility to change your keyboard, you will have problems.
If you chose not to read at least be more specific and you might get some help.
you are not the first person to have this problem with their tilt.
Click to expand...
Click to collapse
you are correct, here is what I did:
Had original AT&T Rom
Flashed HTC 6.1 ROM, keyboard was not working, applied patch, keyboard still not working
Flashed Dutty's April 17 Fix ROM, keyboard was not working, applied patch, keybaord still not working.
Flashed to TNT Official ROM, keyboard not working, applied the patch, keyboard is now working
now maybe I will try to go back to the HTC Windows Mobile ROM and see if the issue is now resolved.
It seems like the first time I flashed the device caused some issues.
I am not sure what you meant about reading or being specific if not reading....I did read all the forums and searched but couldn't find the solution, maybe I missed the post where it's mentioned that this could be ROM specific issue.
Please try searching the thread where this ROM was originally posted for answers, prior to posting this question in that thread.
In the future, please try to reply to an existing thread before creating a new one, especially in the ROM development forum.
Thread closed.
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
How about flash ur stock ROM back, then revert the stock SPL. There may be semething wrong with ur device
GERMAN ROM
http://forum.xda-developers.com/showthread.php?t=426400
German ROM work fine
Guess what .... after flashing back to a german ROM (thks for the link to an htc oiginal ) the "customization" with Opera9_DE went well and finish up normally.
i am going to work/play a bit with the German version to make sure it does not come from the device
any other idea in how/why my German o2 xda does not love all the great simple ROM cooked here ??
is any o2 Germany user here havig successfully flashed their xda with an English (or French ) ROM ??
Thanks guys for the great work you do here !
Steph.
I am seeing this exact same issue.
I have had no end of grief flashing my Raph, I maintain an XP VM (I am on OS X) entirely for flashing. I have flashed many different devices with dozens of ROMs and never had a problem until I got the Raphael. I have seen BSOD's and numerous connection issues while flashing using both Raphael_CustomRUU_v1.2 and RaphaelWrapper.
Also, every ROM I have flashed (on a XP SP3 box I put together from old pieces just to flash this bastard) has hung whilst installing opera.
I am using the o2 uk variant (as yet unreleased XDA Serra).
It is a RAPH120, is this unique to o2 devices?
Would appriciate any help getting this sorted, it could become a more widespread problem with the o2 uk variant is released, as there may be an influx people wondering why their device wont flash properly.
nb. I have an unreleased o2 built ROM (RUU_Raphael_O2_UK_1.60.206.1_radio_sign_52.29.25.12_1.01.25.16_Test.exe) that flashes and installs fine even from inside my VM.
Thanks in advance for any help anyone could provide!
[UPDATE] I tried installing Opera build 1957 from a cab and it worked fine.
maybe a dumb suggestion... but try to get your device unlocked and see what happen
I checked with Oli about whether unlocking would help:
Olipro said:
I see, then that's a weird issue, however, not related or fixable by the unlocker.
your best bet is to do a soft reset as soon as the customization dialog appears and see what happens.
I was initially suspecting it could be region protection, but in those cases, the ROM doesn't boot at all, so your case is a strange one.
Click to expand...
Click to collapse
So no leads there, as an interim solution I will repack ROMeOS² v1.03 without Opera and see how that works out.
i have the same device and the same problem. I will try to repack it with the german version of opera..
Oh dear, so it would appear that current roms do not work on O2 variant devices...
Has anyone successfully flashed an O2 device (with a cooked rom)?
I have hit some problems repacking ROMeOS² as hung has included measures to stop people making their own roms based on his. I pm'd him last night asking if he could help us out, but as of yet I have not recieved a reply.
I will probably start making my own rom from scratch tonight, but its a fair bit of work just to take opera out of the customization sequence. Hopefully its just some odd bug in the opera install, rather than something more serious. I guess worst case scenario is that after opera is removed it just crashes at another point during the costomization process.
[UPDATE]
hang.tuah said:
@dabs
I'll try to make it [ROMeOS² without Opera] for v1.04 mate, thanks for ur support..
Click to expand...
Click to collapse
Excellent, so at least we have a workaround in the pipeline. Still, it would be best to find the cause of the problem, as not all cooks have the time and dedication to make special versions of their roms for a small sub-set of users.
Actually Opera is included but with no device specific & v1.04 is done
smaier said:
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
Click to expand...
Click to collapse
Hi Stephane and others having similar trouble,
I had the same situation but my original ROM was Japanese, after trying a lot of possible official WWE versions for flashing and cooked ROMs, only one version worked.. Check the official WWE version Singtel.. it worked up to customization without problem.. the only difference the default internet page is Singtel but it is not a problem cause I can still go to the other sites..
Hi, ive flashed a few handsets before (wallaby x2, alpine and a wizard) and had no problems but for some reason cannot even get off the first hurdle with my t-mobile vario iv and cant even unlock the dam thing to flash a custom rom! ive looked at post after post and downloaded so many programs like hard spl and nothing works. the programs ether wont even open or they fail half way through the process but havent bricked my phone so far (fingers and toes crossed!) please could someone help me with what unlocking software i need, what radio rom and main rom i should be using. Really i would like to try a standard wm6.5 rom and then try custom roms after but like what nrg have done if stock is not avaliable. its model is RAPH300 part no- 99HFP013-00
my current rom version is 1.69.110.8 WWE
my current radio version is 1.02.25.19
protocol version 52.33.25.17U
my email is [email protected] if you prefer to help via email
thanks in advance everyone, steve.
Anyone out there?
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
duke_stix said:
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
Click to expand...
Click to collapse
thanks for trying to help, have you ever read something over and over and repeatedly missed something in it? i think thats what i did wrong. i did not see the bit about removing my sim card even though i had read the noobs guide again and again. removed my sim and bosh, spl worked! then everything else was a breeze and i am now running the energy 3.0 wm6.5 rom! havent flashed the radio yet but will probably do that today. the energy rom is a vast improvement on my stock 6.1 rom in many areas and seems to have improved camera performance quite a lot (not quality) and the menus are going to be great once i have got used to the totally different interface. does anyone have any sugestions on other roms tha may be better than this one?
Hi there
Glad to hear you got it working!
I am personally using NATF's WM6.1 lite touch pro rom as all i look for in a rom is stability as i actually use my phone for phone/text purposes and there is nothing more annoying than a hanging phone when your trying to quickly reply to a text message!
After the first time I flashed my phone I could never make GPS work again, and the GPS signal was already weak before flashing.
Now I've flashed it again and when testing with GPS TEST app, it said the GPS was ON, so I left the phone running the application the whole night, when I woke up, and it still couldn't get a lock.
Have already followed the procedure of using engineering mode to download EPO and use the AGPS thing, the network doesn't seem to be helping at all, it finds the satellites, but the lock won't work. I've even opened my phone and enhanced the GPS antenna by soldering a copper wire followed by an aluminium (Isolated with electric tape), I know this method improves the signal because I've done that with the WiFi and SIM antennas, the signals were improved by 65%, but the GPS? No can do.
I suspect the phone isn't recognizing the GPS hardware, that I still have to do something else, like installing a "driver" or something. I not even get a weak signal, nothing, it's like my phone's GPS hardware never existed. Get it? I got a feeling that the phone isn't recognizing the GPS hardware.
Another question, does the BT (Bluetooth) code in SN Write software has something to do with it? Because after flashing the phone, it is necessary to configure the IMEI and BT.
matheussousuke said:
After the first time I flashed my phone I could never make GPS work again, and the GPS signal was already weak before flashing.
Now I've flashed it again and when testing with GPS TEST app, it said the GPS was ON, so I left the phone running the application the whole night, when I woke up, and it still couldn't get a lock.
Have already followed the procedure of using engineering mode to download EPO and use the AGPS thing, the network doesn't seem to be helping at all, it finds the satellites, but the lock won't work. I've even opened my phone and enhanced the GPS antenna by soldering a copper wire followed by an aluminium (Isolated with electric tape), I know this method improves the signal because I've done that with the WiFi and SIM antennas, the signals were improved by 65%, but the GPS? No can do.
I suspect the phone isn't recognizing the GPS hardware, that I still have to do something else, like installing a "driver" or something. I not even get a weak signal, nothing, it's like my phone's GPS hardware never existed. Get it? I got a feeling that the phone isn't recognizing the GPS hardware.
Another question, does the BT (Bluetooth) code in SN Write software has something to do with it? Because after flashing the phone, it is necessary to configure the IMEI and BT.
Click to expand...
Click to collapse
What did you flash your phone with exactly ? Most ROMs released recently have GPS and VPN bugs.
[email protected] said:
What did you flash your phone with exactly ? Most ROMs released recently have GPS and VPN bugs.
Click to expand...
Click to collapse
Original Stock Rom found at Doogee blog. Also tried the upgraded version, found in the same site. Only the upgraded version works well, the older one has a bug in the video.
I tried all the steps cited before, so would that be a problem with the ROMS?
Then what do you think about custom roms? I found some here, I'm willing to try them:
http://www.mtkroms.com/p/mtk-6572-custom-roms.html
matheussousuke said:
Original Stock Rom found at Doogee blog. Also tried the upgraded version, found in the same site. Only the upgraded version works well, the older one has a bug in the video.
I tried all the steps cited before, so would that be a problem with the ROMS?
Then what do you think about custom roms? I found some here, I'm willing to try them:
http://www.mtkroms.com/p/mtk-6572-custom-roms.html
Click to expand...
Click to collapse
Custom ROMs are better just read known issues or bug list before flashing custom ROMs though.all the best.
Oops, the site mtkroms have only general ROMs if you flash you'll get bootloop unless you port the downloaded ROM for your phone
[email protected] said:
Custom ROMs are better just read known issues or bug list before flashing custom ROMs though.all the best.
Oops, the site mtkroms have only general ROMs if you flash you'll get bootloop unless you port the downloaded ROM for your phone
Click to expand...
Click to collapse
Thx, I noticed that rom port part. Well, where can I find custom mtk roms?
matheussousuke said:
Thx, I noticed that rom port part. Well, where can I find custom mtk roms?
Click to expand...
Click to collapse
Don't search for your chipset roms search for your phone or you'll brick it.
[email protected] said:
Don't search for your chipset roms search for your phone or you'll brick it.
Click to expand...
Click to collapse
Not true at all. See here: http://forum.xda-developers.com/showthread.php?t=2526106 I have this phone, have ported and used every single mtk6572 rom available, none of them enable GPS at all, this chipset is useless for that.
Any roms you need or want, jb4.2, then let me know. I'll either have it already or will quicly port it for you, but that is such an easy thing to do anyway: http://computerplusandroid.blogspot.com/2015/09/mtk-porting-guide-for-jellybean-same-soc.html
Find an mtk6572 rom you like, port it as described above, then flash it. NONE of them have GPS working well, I've tried so, so many. Just find one you like the look of. Mediamod v5 is a good one, and lollifox also.
http://the-daffi.blogspot.co.uk/ good list of roms, its in Indonesian but just download the links based on screenshots simple way is download it, unzip it, swap the boot.img from your working rom into the rom folder you just unzipped, copying over it. Then highlight SYSTEM, METAINF and BOOT.IMG with the mouse, and zip it back up as a .zip. Then flash that. If that boots and you like the look of it, then properly port it, all the .lib files, all etc files and things to make it work well.
robneymcplum said:
Not true at all. See here: http://forum.xda-developers.com/showthread.php?t=2526106 I have this phone, have ported and used every single mtk6572 rom available, none of them enable GPS at all, this chipset is useless for that.
Any roms you need or want, jb4.2, then let me know. I'll either have it already or will quicly port it for you, but that is such an easy thing to do anyway: http://computerplusandroid.blogspot.com/2015/09/mtk-porting-guide-for-jellybean-same-soc.html
Find an mtk6572 rom you like, port it as described above, then flash it. NONE of them have GPS working well, I've tried so, so many. Just find one you like the look of. Mediamod v5 is a good one, and lollifox also.
http://the-daffi.blogspot.co.uk/ good list of roms, its in Indonesian but just download the links based on screenshots simple way is download it, unzip it, swap the boot.img from your working rom into the rom folder you just unzipped, copying over it. Then highlight SYSTEM, METAINF and BOOT.IMG with the mouse, and zip it back up as a .zip. Then flash that. If that boots and you like the look of it, then properly port it, all the .lib files, all etc files and things to make it work well.
Click to expand...
Click to collapse
What I meant was downloading a ROM developed for chipset say 6582 and then flashing right away would result in install failure or a bootloop etc.. So I just told him to search for one that's already ported for his phone.
I know downloading ROM from mtkroms and replacing some files ,decompiling boot.IMG etc are easy but most I guys talked this to didn't wanna go through all that hassle.
And about GPS some ROMs I tried GPS works others didn't so I thought flashing another would work I admit I'm not that knowledgeable ,was trying to help sorry.
you can port 6582/9280 to 6572 as well, its just harder. I have/had this phone and then bought one for my son, his was brand new, untouched and GPS didnt work even then
robneymcplum said:
you can port 6582/9280 to 6572 as well, its just harder. I have/had this phone and then bought one for my son, his was brand new, untouched and GPS didnt work even then
Click to expand...
Click to collapse
I use lenovo a5000 GPS works fine on kk/lp based ROMs but not on marsh based ROMs cuz it was a bug that came at the time of compiling forms source .
But you guy's problem sound more like a hardware
Defect in the phone than the ROMs. Best contact your phones customer care if they're still alive . unbelievable how a company can mess up on a vital component of phone like GPS.
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Thx fellas.
@robneymcplum Please, if you can port the ROM for me, I'll be very thank you. I've read the ROM porting tutorial, but didn't understand the last parts, stuff like de-compiling and compiling the boot.img.
@[email protected] They're more alive than ever, and still manufacturing those things....
robneymcplum said:
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Click to expand...
Click to collapse
By the way, I made it work once, I was at a high place and I could get my location using Sygic.
This phone has 7 antennas, where 4 antennas are the GND (Ground) part of each receptor.
You have to build a custom antenna for each one of them, soldering a small piece of iron or aluminum solves that problem. By using this method I was able to improve the wifi and SIM signals a lot. The only problem is that you have to very careful not to unsold the antennas of the board.
So following that logic, I conclude that the GPS not getting a lock is definitely a Hardware issue, I also forgot to mention that I went to an open space to get the signal. I can't get a lock on a single satellite, it is very frustrating, definitely not buying from those guys ever again.
Beside the GPS not working, this phone's touch screen is average, this phone's camera is horrible, this phone's internal memory for both applications and storage is terrible, this phone speaker is low, the headsets are annoying (They hurt your ear after using them sometime), the hardware isn't that great (Dual core with 512 RAM), so after seeing all the trouble I've got into, I should have bought a galaxy s4 by the time I bought that one, I had even sold my galaxy s3, thought I was saving, when I reflect about all the feature I've "lost" when I decided to save money, and it isn't a big difference between this phone's price and a galaxy s4.
robneymcplum said:
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Click to expand...
Click to collapse
I've only seen now that you've mentioned the country part.
I've been searching all day long and I found out that there is a way to not only download the country based gps.config file, but also use GLONASS (A russian supported GPS version like thing).
Also saw people saying they've last their GPS after Jelly Bean Upgrade.
Just flashed a newer rom that I've found here, still no luck. Now Loading....
PS: If it works fine in China, then there is a hope....
robneymcplum said:
I think its country dependant, it works fine in China according to forums, I'm UK and it doesnt and has never worked, and can only get JB roms as there is no kernal available for even KitKat
Click to expand...
Click to collapse
Lenovo ***ed up with our update for lollipop overheating ,battery drain etc so the guys at 4pda filed a petition so lenovo would release the source code and they did.
And the lads also have released custom kernel 3.4.67 and 3.10.54. I could only find recovery development in 4pda for your phone though.
[email protected] said:
Lenovo ***ed up with our update for lollipop overheating ,battery drain etc so the guys at 4pda filed a petition so lenovo would release the source code and they did.
And the lads also have released custom kernel 3.4.67 and 3.10.54. I could only find recovery development in 4pda for your phone though.
Click to expand...
Click to collapse
Just replaced the gps.config with one from my country. No can do.
It seems to be a problem related to that version of jelly bean.
https://drive.google.com/open?id=0B_A_RDn2fPEwNkhONW1CSVZ4OFk
This is the rom I'm using, seems to be the best for looks vs performance for all the ones Ive found, BACK UP your rom first in CWM just to be sure. Porting is easy, you dont need to recompile boot.img, just copy/paste your boot.img from the rom you are using now into the rom you have downloaded, is really easy. This rom here, 'should' work fine, but if it wont boot then its a boot image issue, simply unzip this rom, copy over your current boot.img and then rezip it back up. Dead easy I then change build.prop screen density to 190 if it isnt already, developer settings and change all the animations/windows to the lowest settings, I use nova launcher as I prefer it.
I then use xposed with holothemer to theme the settings to android L
gravitybox for the usual tweaks
bootmanager to stop various things from starting
and what ever else you need, with greenify and google play services removed, I have a resting RAM of 130/150 free with 2 day battery life.
robneymcplum said:
https://drive.google.com/open?id=0B_A_RDn2fPEwNkhONW1CSVZ4OFk
This is the rom I'm using, seems to be the best for looks vs performance for all the ones Ive found, BACK UP your rom first in CWM just to be sure. Porting is easy, you dont need to recompile boot.img, just copy/paste your boot.img from the rom you are using now into the rom you have downloaded, is really easy. This rom here, 'should' work fine, but if it wont boot then its a boot image issue, simply unzip this rom, copy over your current boot.img and then rezip it back up. Dead easy I then change build.prop screen density to 190 if it isnt already, developer settings and change all the animations/windows to the lowest settings, I use nova launcher as I prefer it.
I then use xposed with holothemer to theme the settings to android L
gravitybox for the usual tweaks
bootmanager to stop various things from starting
and what ever else you need, with greenify and google play services removed, I have a resting RAM of 130/150 free with 2 day battery life.
Click to expand...
Click to collapse
Thx, I'll make sure to try it. Sorry for not having answered before, this site didn't show me there were new replies here. I decided to come to inform you guys that I found out why the GPS issue is happening. It's a NVRAM bug, I'm 99% sure. I've seen people saying they lost GPS feature after they flashed their phones and it was because of VRAM.
You can check it out here: http://www.chinaphonearena.com/forum/Thread-iNew-v3-NVRAM-download-backup-restore-tar-bin-files
I already had suspected before if it was the VRAM because the first thing you see on the phone after flashing is a ERROR VRAM in wifi networks. I wondered if that was the case, but until yesterday I couldn't find anything related to that, a few hours ago I found. Too bad I screwed with my AGPS, GPS and EPO files replacing files from stock rom. I guess I'll have to flash it again. Right now I'm looking for a NVRAM file. Man, you have no clue how I prayed to fix this thing., I was about to buy phone, not a Chinese one though (Not going to make that mistake again in my life... ever). lol
robneymcplum said:
https://drive.google.com/open?id=0B_A_RDn2fPEwNkhONW1CSVZ4OFk
This is the rom I'm using, seems to be the best for looks vs performance for all the ones Ive found, BACK UP your rom first in CWM just to be sure. Porting is easy, you dont need to recompile boot.img, just copy/paste your boot.img from the rom you are using now into the rom you have downloaded, is really easy. This rom here, 'should' work fine, but if it wont boot then its a boot image issue, simply unzip this rom, copy over your current boot.img and then rezip it back up. Dead easy I then change build.prop screen density to 190 if it isnt already, developer settings and change all the animations/windows to the lowest settings, I use nova launcher as I prefer it.
I then use xposed with holothemer to theme the settings to android L
gravitybox for the usual tweaks
bootmanager to stop various things from starting
and what ever else you need, with greenify and google play services removed, I have a resting RAM of 130/150 free with 2 day battery life.
Click to expand...
Click to collapse
About the rom you provided: What files should I port into the boot.img? All the files from current rom boot.img or some specific files?
PS: Is that ROM bugless?
matheussousuke said:
About the rom you provided: What files should I port into the boot.img? All the files from current rom boot.img or some specific files?
PS: Is that ROM bugless?
Click to expand...
Click to collapse
Apart from the GPS rom is faultless. Do this ONLY if it wont boot, it should work straight away though.
Dont need to add/remove anything from the boot.img, copy it as a whole file.