so when my phone first starts up and tf3d and gyrator 2 get running i am at about 40 pct usage according to the htc task manager in the top right corner
after a few hours even if i close everything out except tf3d im still at about 53 to 55 pct. is this normal?
lbhocky19 said:
so when my phone first starts up and tf3d and gyrator 2 get running i am at about 40 pct usage according to the htc task manager in the top right corner
after a few hours even if i close everything out except tf3d im still at about 53 to 55 pct. is this normal?
Click to expand...
Click to collapse
yeah thats pretty normal. used to have the samething on my kaiser. some roms are better at protecting memory leakage than others.
im using romeos
anyone else with results from same rom or others?
Related
Is this normal in WM5? CPU usage is 70% all the time (even after hard reset) and games are running very slowly. Is it problem in my device or is it normal. Am I doing something wrong?
Thank you for any help
Mondain said:
Is this normal in WM5? CPU usage is 70% all the time (even after hard reset) and games are running very slowly. Is it problem in my device or is it normal. Am I doing something wrong?
Thank you for any help
Click to expand...
Click to collapse
70 % remaining or used?
Not normal, which application eats the cpu?
70% used (in XCPUScalar)... when I look into DRrunning apps it shows that idle proceses are using 75-85 cpu usage.
Mondain said:
70% used (in XCPUScalar)... when I look into DRrunning apps it shows that idle proceses are using 75-85 cpu usage.
Click to expand...
Click to collapse
This is normal, it takes around 15% to show cpu usage.
Ok but it is normal that every game has really poor framerate? Even my friend with mda 1 has now better performance than me...
Mondain said:
Ok but it is normal that every game has really poor framerate? Even my friend with mda 1 has now better performance than me...
Click to expand...
Click to collapse
Nope, but which rom do you have? Have you a lot of background apps? What is the status of the memory?
dotfred said:
Nope, but which rom do you have? Have you a lot of background apps? What is the status of the memory?
Click to expand...
Click to collapse
I am using C_shekhars ROM (24 pagepool, 40 ramdisk)
As I said it is doing it even after hard reset with no apps. I have almost 50MB free program memory now. I think thats enough for a game like worms world party, so problem must be somewhere else.
why not try without XCPUScalar
maybe it's underclocking the device
I did hard reset and everything seems to be fine now... really strange because I tried hard reset several times. I'll install apps one by one and find that one which is responsible.
Thx for all help
Rudegar said:
why not try without XCPUScalar
maybe it's underclocking the device
Click to expand...
Click to collapse
Mine using c_shekhar latest ROM(24 pagepool, 40 ramdisk) & without XCPUScalar no other application running in backgroud but the CPU usage show is 70 to 85% for idle process. It is normal?
zaidam said:
Mine using c_shekhar latest ROM(24 pagepool, 40 ramdisk) & without XCPUScalar no other application running in backgroud but the CPU usage show is 70 to 85% for idle process. It is normal?
Click to expand...
Click to collapse
What tool are you using to show cpu usage ?
Most of the time, only showing the cpu usage takes around 15% of the cpu!
Cheers,
.Fred
i am using DFRunningApps (Task Manager v1.9) which is come with current
c_shekhar ROM
zaidam said:
i am using DFRunningApps (Task Manager v1.9) which is come with current
c_shekhar ROM
Click to expand...
Click to collapse
Yeap, as I mentioned earlier. Showing the CPU usage with TM takes around 15 % because it is updated every second.
Cheers,
.Fred
Rudegar said:
why not try without XCPUScalar
maybe it's underclocking the device
Click to expand...
Click to collapse
This is an excellent idea.
XCPUScalar does not properly store your settings when toggling 'dynamic' mode on or off - the process is this:
1. set dynamic on, then set up your cpu vs load speed ranges
2. EXIT xcpuscalar
3. launch it again
4. set dynamic off, then exit
5. start again
6. choose a speed for when the machine is charging on the first page (the slider above 'dynamic' mode toggle)
7. exit
8. start again, turn on dynamic mode
9. exit
10. DONE! it's now safe to run, and will remember your settings
this bit me in the ass for a long time. sometimes it would underclock so hard I couldn't answer calls - other times, it was running at 500mhz and giving me about 2 hours on a full charge.
XCPUScalar won't let you configure everything at once. it's great when you get over that.
Been lurking for a while, made one or two posts, trying to learn what I can and avoid asking all the typical n00b questions.
But I've got one.
I'm using a Vodafone v1240 and WM6 English 5.2.1616.18120 Standard v3.4. When I first installed an earlier version (v2.0, I think), when I opened up OMAP Clock, it showed running at 132MHz. I bumped it up to 204, but maybe ten minutes later it was back at 132. I then bumped it up to 180, and it's stayed there since. When I installed v3.4, it was still at 180.
But no matter what I set it to, within a few minutes it switches itself back to 180.
Am I doing something wrong? Or is my phone trying to tell me to stop messing with the clock and it's happy at 180?
From what i remember reading, when your phone goes to sleep (screen goes black) it resets it back to the phones default (which should be 180 as far as i know). i've made myself a shortcut and OC'd it to 252, personaly i've not had any problems, but these results vary.
PS: Mine is originaly a T-Mobile SDA
Thats right after every sleep it goes back to the standard clocking.
I'm using Tornado Power Control for overclocking and my phone works fine with 264 MHz.
Here is the link
http://forum.xda-developers.com/showpost.php?p=1362675&postcount=6
Have fun....
I just found an interesting "bug" with Vox Display Driver and the OmapClock, it's kind of a bug i like actually, since the Vox doesn't update when the phone is in sleep, the OmapClock stays at the designated speed
Yeap, the screen doesn't refresh until you press any button. So if you leave the screen idle at 2pm, it will show that even at 10pm unless u refresh it by pressing any button, same with the clock rate
264 mhz what thats high
KingAxel said:
Thats right after every sleep it goes back to the standard clocking.
I'm using Tornado Power Control for overclocking and my phone works fine with 264 MHz.
Here is the link
http://forum.xda-developers.com/showpost.php?p=1362675&postcount=6
Have fun....
Click to expand...
Click to collapse
are you useing qtek 8310 and if you does it doesent it gett hot or burn the proccesor when you over klock it to 264 mhz
I'm using a xda phone which is the htc tornado without wlan.
And the device is not getting hot or the porcessor burned, the only thing is that the phone can stopp working, so that you have to take the battery of and switch it on again.
Try with omapclock to get the best speed for your phone, before you use Tornado Power Control.
Nice day
has anyone successfully set up the tornado powercontrol with the 'hide' option. every time i start my device, powercontrol comes up. seems that hide does not do anything...
any help?
it works now. you have to make sure, that 'hide' not has a blank at the end like 'hide '. it would not work like that.
I'm not sure if this is normal, so I thought I would ask some of the pros here at xda. When I soft reset my Fuze it generally starts out at about 37%. active sync kicks on, which by the way I've been trying to find how to keep this from coming on automatically, but no luck. This puts it at about 40%. Once I use something like sky fire, and I'm at 53%. This wouldn't bother me ,but it's at 50% after I've closed the program, and it stays there, draining my battery. is this normal? any suggestions, if it's not?
Oh ya, I forgot to mention.
Running NATF's v2.3 ROM
Stock Radio
don't know if this matter but, Fuzeberry v3.0 w/ L.S. carbon dialer skin, and Icontact contacts.
Yes when I had Touchflo enabled my memory usage was exactly as yours.
You can prevent activesync from opening up at startup by going to Settings>Personal>Phone>Timezone>uncheck Automatic change timezone and clock
behrouz said:
Yes when I had Touchflo enabled my memory usage was exactly as yours.
You can prevent activesync from opening up at startup by going to Settings>Personal>Phone>Timezone>uncheck Automatic change timezone and clock
Click to expand...
Click to collapse
nah that fix doesnt work
trust me ive tried about 6 different things nothing stops it
*posted message in the wrong board >.<
I looked right at my fuze when i read your post. I'm at 47% with mail and Windows Live messenger open. I wouldnt be that worried about your memory usage.
Im usually Hovering at 45% to 50% with nothing running and with TouchFlo Enabled... I figure this is normal but i wish i could lower it
cool. I just wasn't sure if that was normal or not. figured I'd get some user's feedback. thanks all. As far as the active sync I guess I'll give that a shot. but i guess it only uses like 1% of the CPU any way so whatever.
I believe you are referring to Memory Usage and not CPU usage. If you CPU is constantly at 47% then you should be concerned. If its just your memory I wouldn't worry too much. When I soft reset Im at 30% usage with TF3D and that creeps up to 40%. I can usually keep it at about 40% using MemMaid and Task Managers.
Keep in mind every menu you open cache's the icons and wastes memory. So if you go into the settings menu and then open you programs folder along with subfolders. Everytime you do this the icons have to load into memory and will stay there. Also some programs don't close completely and stay running as a process. I would recommend getting a task manager that can kill processes. FDCSoft Task Manager is free and works perfect.
yeah after a reset with tf3d im usually at 36 or so
after running stuff then using memaid to clean im back at 40
i have a 32 mb pagepool, and with no tf3d im at 36% 118/184 then with tf3d im at 40-43% depending on apps, and i never go above 48% when im playing a game with tf3d on
So TouchFlo takes up decent space but not crazy space
considering the amount of ram the raphael has the amount of ram TF3D takes up is very insignificant. As for CPU usage.....once its already fully loaded into ram it shouldn't use very much if any cpu at all.
i loaded the mightyrom on my phoneits all good but i have a battery problem it'll always remain at 100...then 90 then 80 it doesnt go from 99 to 91 or so just 100..90..80
what may be the problem
bumnp pls..anyone?
just install the 1% battery cab, i dont know if mightyrom includes it or not
http://forum.xda-developers.com/showthread.php?t=556318
just curious on how much RAM it shows you that is left on the device after you unlock. Most of the time mine will be over 100MB but throughout the day it goes down alot....ending up around like 50 something if i dont reboot. Just wanted to know what others were getting.
it's been about 24 hours since i've restarted mine and im at 81M
147 MB since im using minfreemanager as well as auto-killing tasks every 4 hours.
167 on fresh boot and after task killing
do not work my phone :-(((
Task killers are really pointless on Android as It has a really good mem manegment system. It will close things as needed. It takes more to start it from a clod start then letting it stay in the background