Hi all im new to these forums and the treo 750. I've been reading all about upgrading the treo to the cooked 6.1 roms and radio updates. I've never done this and have NO idea how to do it...I keep reading about flashing the ROM from the miniSD and different things...But is there a step by step instruction on how to do any of this stuff???
has someone helped you?
a guide
Here is a guide, from my experience and from XDA forum :
1. Download the rom file and the radio file:
Rom file from here : http://rapidshare.com/files/89355384/Treo750_WM6.1_WWE_Lite.rar
(It is the lite version but I recommend the normal version.)
The radio file from here :
http://rapidshare.com/files/89336971/Treo750Radio1.54.07.00.rar
2. Download the Hard-SPL from here :
ftp://xda:[email protected]/Cheetah/Unlocker/CheetahUnlocker.rar
3. Format mini SD card 32 FAT , using a card reader or other way.
4. Do a HARD-SPL with the CheetahUnlocker file ( step 2) . Connect the Treo with your computer using Active sync and run the file. Use those steps:
- Click the Step 1.... wait the progress bar reach 100%
- Now watch the Screen on your PDA it will launch 2 times verification...
- just click YES ...wait.. and YES again.
- after finisih... wait until the activesync go green again.....
- Now click the Step 2... wait the progress bar reach 100%
- Watch the screen again... same thing.. it will launch 2 times verification.
- click YES ...wait.. and YES again.
- After finish it your PC screen will shows some popup. ignore the reading bla bla bla... about ask u to click ok.
- Just wait untill your activesync go green again.
- Now click that bloody Popup OK button.
- The unlocker app will shows up again..
- Then you will see errors saying.. continue, cancel...etc... bla bla... just click continue.. error message.. iqnore it and then just finish it.
- Now your Cheetah should be on HARD SPL mode.
5. Install the ROM :
a. Using Winrar get the file from step 1. It's name should be : CHEEIMG.nbh
b. Copy the file to the root of the mini SD .
c. Do BOOTLOADER:
1. turn phone on
2. press the MEDIA button AND at the same time with the stylus the RESET PIN
the MEDIA button is the 3rd button on the left side of the phone, under the volume button
the RESET PIN is under the MINI SD card cover
3. keep holding the MEDIA button (left side of phone) until you get the 3 color screen
Wait until it finishes. Then Hard reset the device when prompted. To hard-reset, hold the End key while pressing the pin reset button. Answer “yes” to “Erase all data” prompt.
6. Flash the radio at the same way – just copy the radio file to the mini Sd – it should be the same name. (CHEEIMG.nbh ) .
And that it all !!
Do not restore from your backup (You can restore only your data files).
As I said I recommend the normal 6.1 version and not the lite one - I tried both.
one more thing - maybe before doing the upgrade to 6.1 - try to upgrade to 6.0 version from Palm , and only then upgrade to 6.1 version .
Hi Libal:
I just read your great step-by-step Windows Upgrade instructions! Very nice!
I've also gone round and round trying to figure out the exact way to unlocking my Treo 750. It is Cingular USA branded, and currently has Windows 5 on it.
Do you know of a similar step-by-step guide to unlocking my Treo 750?
I bought my 750 about two weeks ago, and I've been trying to unlock it since!
Thanks for your help!
I'm not sure but I think that it should be the same way
but maybe first upgrade to official 6.0 . ( because of the .net support) .
There are other ways to unlock the phone- look in the forum.
[but maybe first upgrade to official 6.0 . ( because of the .net support) .]
Do I have to upgrade Windows to unlock the phone? Which is the "official" upgrade?
[There are other ways to unlock the phone- look in the forum. ]
That's the problem! I've read through the forum over and over, and I'm confused as to what to do!
the steps mentioned above is the unlocker process. have you tried the unlocker yet. what does it do? are you getting stuck somewhere doing the process. ive been there all cofused too. need to know more info in order to try and help.
Hi nuwayman:
I have not yet tried the unlock, because I'm so confused! I thought the procedure in this thread was to upgrade Windows, not unlock?
Isn't the Hard-SPL the unlock process?
This is why I haven't started! Every time I think I know enough to begin, I find something more confusing!
For example, the post above is very specific, and easy to understand. Until the end, when he says this:
...maybe before doing the upgrade to 6.1 - try to upgrade to 6.0 version from Palm , and only then upgrade to 6.1 version...
So, what's the correct way? Go straight to 6.1, or do 6.0 first?
Other threads seem to say that 6.1 is a problem, and that 6.0 is better. So, which is it!
Anyway, I need to unlock, so where do I start?
i would start with upgrading to wm6.0. you shouldnt have to do unlocker process to upgrade stock rom.start there first.
I just upgraded my Treo750
With Regard to upgrading from Palm, I doubt you will find the upgrade anymore on the Palm website, I couldn't when I looked today. You may have to search the Forums for a 6.0 version or go directly to 6.1.
You will run into a problem with the upgrade process if you don't use a good Bootloader upgrader/unlocker. I tried five (5), the only one that worked was "Cheetah Unlocker" this first upgrades your Bootloader to HardSPL. That is critical to be able to update to WM6.1, (even from WM6.0). This upgrades the Bootloader (Step 1) as well as Unlocking the SIM (if neccesary) in step 2 and the Radio (if neccesary) in step 3. You can cancel out of the Program after Step 1 if you don't want to unlock your phone.
By the way, why not unlock it? Are you still under contract with your phone? Do you plan on returning the phone? If not, unlock it, it won't affect your phones capabilities.
The Cheetah Unlocker is here
http://forum.xda-developers.com/showthread.php?t=334100
There are several wm6.1 ROM's
Here is a good one (worked awesome for me)
http://www.hawleytronics.com/downloads/tn-750wm61ug.php
Here is a "Lite" version.
http://www.hawleytronics.com/downloads/tn-750wm61ug.php
or
http://forum.xda-developers.com/showthread.php?t=365873&page=9
Hope this helps.
will this work for my unlocked cingular phone, using it for T-mobile?
libal said:
Here is a guide, from my experience and from XDA forum :
1. Download the rom file and the radio file:
Rom file from here : http://rapidshare.com/files/89355384/Treo750_WM6.1_WWE_Lite.rar
(It is the lite version but I recommend the normal version.)
The radio file from here :
http://rapidshare.com/files/89336971/Treo750Radio1.54.07.00.rar
2. Download the Hard-SPL from here :
ftp://xda:[email protected]/Cheetah/Unlocker/CheetahUnlocker.rar
3. Format mini SD card 32 FAT , using a card reader or other way.
4. Do a HARD-SPL with the CheetahUnlocker file ( step 2) . Connect the Treo with your computer using Active sync and run the file. Use those steps:
- Click the Step 1.... wait the progress bar reach 100%
- Now watch the Screen on your PDA it will launch 2 times verification...
- just click YES ...wait.. and YES again.
- after finisih... wait until the activesync go green again.....
- Now click the Step 2... wait the progress bar reach 100%
- Watch the screen again... same thing.. it will launch 2 times verification.
- click YES ...wait.. and YES again.
- After finish it your PC screen will shows some popup. ignore the reading bla bla bla... about ask u to click ok.
- Just wait untill your activesync go green again.
- Now click that bloody Popup OK button.
- The unlocker app will shows up again..
- Then you will see errors saying.. continue, cancel...etc... bla bla... just click continue.. error message.. iqnore it and then just finish it.
- Now your Cheetah should be on HARD SPL mode.
5. Install the ROM :
a. Using Winrar get the file from step 1. It's name should be : CHEEIMG.nbh
b. Copy the file to the root of the mini SD .
c. Do BOOTLOADER:
1. turn phone on
2. press the MEDIA button AND at the same time with the stylus the RESET PIN
the MEDIA button is the 3rd button on the left side of the phone, under the volume button
the RESET PIN is under the MINI SD card cover
3. keep holding the MEDIA button (left side of phone) until you get the 3 color screen
Wait until it finishes. Then Hard reset the device when prompted. To hard-reset, hold the End key while pressing the pin reset button. Answer “yes” to “Erase all data” prompt.
6. Flash the radio at the same way – just copy the radio file to the mini Sd – it should be the same name. (CHEEIMG.nbh ) .
And that it all !!
Do not restore from your backup (You can restore only your data files).
As I said I recommend the normal 6.1 version and not the lite one - I tried both.
one more thing - maybe before doing the upgrade to 6.1 - try to upgrade to 6.0 version from Palm , and only then upgrade to 6.1 version .
Click to expand...
Click to collapse
I couldn't get my 750 to upgrade this way. The unlocking worked fine, but the updating part never worked.
Why do you suggest doing it this way? Why not use an RUU? I have a Elfin as well and just copied the RUU files into a folder with my nbh file and it worked flawlessly. much easier then the way suggested here and works everytime.
is that a yes?
just did my treo 750 ...and it looks very much the same ...except for a few new progs..i thought the text would be different as well as the gui...am i missin something ?
Hi everyone,
I have a big problem and need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good. Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
A question concerning the CheetahUnlocker. When trying to follow the steps indicated, the following happens:
Step 1: the progress bar never moves, the phone goes to the 4 colored bar screen and sits; activesync indicates it has lost the connection; stays like this unti I soft reset. One the phone is back up the unlocker indicates the "DEVICE IS NOW PATCHED TO HARD-SPL"
Step 2: same as step one except following the soft reset the application indicates"==Radio Patched! Now Unlocking!==" but nothing actually seems to happen aside from getting an Unhandled exception error. Continuing past this error and nothing happens. .NET Framework 2.0 is currently installed (as are 3.0 and 3.5).
For both steps, when the application indicates the current information about the phone there is no Image Version listed. Neither of the steps shows any progress bar on the phone..just straight to what I think is the bootloader screen.
Anyone know what I am doing incorrectly?
*****EDIT*****
Please disregard at this point. I found that the bootloader was trying to read off of an older cheeimg file on the memory card instead of pulling from the host PC via USB. Removing the card seems to have done the trick.
This has become more of a problem than I though. Step 1 completes successfully but when it comes time to unlock the phone (after the first part of step 2) ActiveSync will not connect. Clicking ok results in the early mentioned unhandled exception error stating that a file cannot be found.
Additionally, I can no longer connect the phone using activesync.
Any ideas out there?
Another update: I have managed to get ActiveSync working again by removing it and reinstalling the application. However, I am still unable to get past step 2 of the unlocker. Again, the first part of step 2 completes (the radio replacement) but when I click OK to begin the second part (the unlock itself; instructions provided: click OK to begin and watch your phone's screen) I get the unhandled exception error reporting a missing file.
The instructions provided at the beginning of this thread indicate this error can be ignored and I should just click continue. I do this and nothing seems to happen. My computer sits with the CheetahUnlocker utility open and displaying "==Radio Patched! Now Unlocking!==" but nothing is sent to my phone. I have an activesync session going but nothing seems to be happening. Am I just not waiting long enough?
Please..can anyone help with this? At the very least can anyone tell me how to get the original radio installed as the unlocker indicates that without the proper radio it may not function well; and it doesn't.
Getting desperate here. Thanks in advance.
Never mind, everyone. This is no longer a concern. Took the easy way out and just bought a Fuze.
so my phone is already unlocked(dont know how, bought it from craigslist that way)...do i need to do this cheetahunlocker even though phone is already unlocked?
active sync is not working at all..i have tried for 2 days now and no sucess...
ok so i have cheeimg.ngh file on mini sd card and in phone, hit reset while holding media button(3rd one on left side)...it goe sto red, green, blue, white screen and says
Pal Tr IPL-0.20
Pal Tr SPL-0.21.0000
and it isnt doing anything else, any ideas?
Related
Hi all,
Trying to update to a WM6 rom, i may have done something wrong...
After formating as described in the guide, I can't communicate with the unit (in the RUU : error 260 update error).
On the bootloader screen, I can read :
"Tornado
IPL 1.00
Tornado
SPL 1.00.0008
Tornado 1U"
I've tried on 2 different XP PC's, no luck.
Any advice you can give to me ?
Thanks.
Load IPL/SPL from SD card ?
Having done a few mor searches :
- On another Tornado I own, I can read IPL & SPL are 2.00x. So my problem should come from them. I may have used a ROM with wrong versions. With this other Tornado, a small "USB" can be seen in the lower left corner of the bootloader. It never appears anymore with the broken one.
- I can flash this other Tornado without problem from the same PC, so the problem may not be on the PC.
- It seems that you can flash directly from the SD card : put a ROM with a specific name and boot. Anybody knows how to do that ? It could be a solution to gain access to my Tornado, and be able to use the usual tools.
Sorry if my questions are a bit stupid, but I'm no more in an area I know... I'm learning the hard way how to deal with all this !
Thanks.
destombes_chris said:
Having done a few mor searches :
- On another Tornado I own, I can read IPL & SPL are 2.00x. So my problem should come from them. I may have used a ROM with wrong versions. With this other Tornado, a small "USB" can be seen in the lower left corner of the bootloader. It never appears anymore with the broken one.
- I can flash this other Tornado without problem from the same PC, so the problem may not be on the PC.
- It seems that you can flash directly from the SD card : put a ROM with a specific name and boot. Anybody knows how to do that ? It could be a solution to gain access to my Tornado, and be able to use the usual tools.
Sorry if my questions are a bit stupid, but I'm no more in an area I know... I'm learning the hard way how to deal with all this !
Thanks.
Click to expand...
Click to collapse
Do a hard reset. I'm quite busy right now but do this: hold both left and right soft key and at the same time press the power on button. Press the zero key when prompted. You may have to try a few times as he timing is important.
Good luck!
try to format BINFS with the mtty or the tera term tool it may work...and then fla**** again
illi said:
Do a hard reset. I'm quite busy right now but do this: hold both left and right soft key and at the same time press the power on button. Press the zero key when prompted. You may have to try a few times as he timing is important.
Good luck!
Click to expand...
Click to collapse
I did it a few times : I'm asked to press the zero key, press it, can see the i-mate screen during 1 second, a white screen during 1 second, and then the bootloader 3 colours...
Profy_X said:
try to format BINFS with the mtty or the tera term tool it may work...and then fla**** again
Click to expand...
Click to collapse
These tools need to communicate between the PC and the phone, and I can't right now.
destombes_chris said:
Hi all,
Trying to update to a WM6 rom, i may have done something wrong...
After formating as described in the guide, I can't communicate with the unit (in the RUU : error 260 update error).
On the bootloader screen, I can read :
"Tornado
IPL 1.00
Tornado
SPL 1.00.0008
Tornado 1U"
I've tried on 2 different XP PC's, no luck.
Any advice you can give to me ?
Thanks.
Click to expand...
Click to collapse
The diff IPL SPL if I'm not wrong, have to do with the RADIO, someone correct me if I am wrong.
destombes_chris said:
Hi all,
Trying to update to a WM6 rom, i may have done something wrong...
After formating as described in the guide, I can't communicate with the unit (in the RUU : error 260 update error).
On the bootloader screen, I can read :
"Tornado
IPL 1.00
Tornado
SPL 1.00.0008
Tornado 1U"
I've tried on 2 different XP PC's, no luck.
Any advice you can give to me ?
Thanks.
Click to expand...
Click to collapse
I have the same exact problem as you! I've flashed my Qtek 8310 with T-Mobile SDA rom (which is compatible...) since then.. My bootloader shows exactly the same as you, and when I plug the USB there is not the "USB" showing on the bottom left...
In addition to that, when I load up normally, it's stays stuck at the first T-Mobile logo screen...
Did you came out with a solution? I've tried Hard Reset too, but it didn't help, on the contrary... Now I'm stuck at bootloader and I do not get even the T-Mobile screen...
sharedworld said:
I have the same exact problem as you! I've flashed my Qtek 8310 with T-Mobile SDA rom (which is compatible...) since then.. My bootloader shows exactly the same as you, and when I plug the USB there is not the "USB" showing on the bottom left...
In addition to that, when I load up normally, it's stays stuck at the first T-Mobile logo screen...
Did you came out with a solution? I've tried Hard Reset too, but it didn't help, on the contrary... Now I'm stuck at bootloader and I do not get even the T-Mobile screen...
Click to expand...
Click to collapse
No, as of now, no luck... but I don't give up !
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Hi mohaninusa2003, looks like your waiting for a reply since a while. Here you will find all the answers connected to your issue. Probably you did already but just incase have the link
http://forum.xda-developers.com/showthread.php?t=366771
Thanks hammod2k, I have tried all the suggestions on the thread. Still when flashing the original rom, it does not go beyond Bootloader -ok hans at GSM, left overnight for flashing, still not working.
Tried Mtty, set 14 0/ task 28 55aa /
Tried to flash Hard SPL, bit it is not successful, I am getting an error "Image file is corrupted".
I will keep searching threads and reading..in the meantime.
recovery tool
my friend where i can find the recovery tool? i been looking for it but nothing even on the palm suuport page? thanks in advance
regards from lima
mohaninusa2003 said:
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Click to expand...
Click to collapse
stuck on boot loader
hey mohaninusa2003..
I exactly have the same problem bro..it hangs up on gsm...i tried removing my card and hard resetting it but it just brings me to a tricolored screen red green and blue with the word serial at the bottom...tried soft reset but still the same thing..hope someone could help us on this
Hey fguimet,
Please follow the link and look at post 9 for the file,use the Desptop update method file and extract using winrar to get th file you are looking for. hope it helps,
http://forum.xda-developers.com/showthread.php?p=1714416
Sorry to bother but i have a few questions...i have a 750 treo and none of the support on this website is helping...i am trying to flash my palm 750 but its says the file is corrupted..what do i do about that? Progress only reaches 7% ive used cheetah and kaiser unlockers and i was also wondering if it can be flashed just using the computer and usb in booter mode since it wont go past the palm splash screen...i can access my treo using mtty but doing task 2a doesnt do anything either... I think that maybe my phone is screwed up. I appreciate any help you can offer.
I have almost the same problem with my Palm 750 that I believe locked to Rogers.
1. It hangs on GSM if I use SD card ROM file CHEEIMG.nbh . I have tried many different CHEEIMG.nbh files (ATT, Cingular, ROW…)
2. Running CheetahUnlocker will crush at 7%, and my Palm 750 will reboot and freeze at MS Mobile screen.
I have the same problem, and I think we have to change the IPL and after run cheatunlock.
How can we do it?
on my treo I have hard-spl'd but still i cant manage to flash a rom
My Bootloader screen results:
CHEE100
IPL - 0.20
CHEE100
SPL - 1.40.0liNex
______________________
it starts, gets to about 4-7% and then it says:
|00018003
|CHEEIMG.nbh - FAIL
|
|OS - Fail
|
|
|
|Update Terminate
|UPDATE FAIL
i have no idea what i am doing wrong
it all started when i tried to flash a wm 6.5 os and it didnt work... i was just randomly stuck on the bootloader screen
Swarford
my prophet was working normaly and while i was installing a program it stoped. i formated it and reinstalled the windows but what happened is:
1-it doesnt recognize the memory card anymore
I thought it is rom problem , i tried to install anothere rom but THERE IS NO 3 colour screen but the prophet is working
please any body have idea about this problem reply .
have u done hardspl? try flashing another rom..
i tried hardspl but it didnt continue the process
while i was doing hardspl my prophet turnedoff
thank blusilv for reply
where is the help??????????????
Listen up
First off all charge the battery for 2 hours before doing this.
After turn on the device and press for 5 seconds the com button on the left side of the device.
You will enter the 3 colours loader.
Connect the device to the PC.
Step 2 Install the original Rom
Step 3 Do a Rom update use step 2 of pdamobiz Rom, select update rom file and wait.
Step 4 Do a hardspl G3 or G4 see your device to see witch one is it.
Step 5 install a new Rom with the RUU update utility G3 or G4.
Then you just have to wait the device to reboot and you can use it.
Note: Use the 2.19 radio Rom its the most stable, you can install it after installing the final Rom ok.
Any questions feel free ok bye.
i am sorry but i thought the three colour screen meens bootloader my problem now that i cant change this rom as it dont recognize the memory and also there is prblems with bluetooth.
thanx deltav but ineed more help
Listen up that procedure i explained would put the PDA working 100%, if you have the problems you say you do, its because you installed a rom inappropriate for you device. The memory and bluetooth problems come from bad radio rom and from roms that are not suitable for the device, you mad bad installations, that is the real origin for your problems, if you want to stay with your device with problems fine, in my opinion the best is to put the original rom in and after that, do the rest of procedure if you don´t want to this its up to its your device not mine.
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Hello,
Same problem here, no 3-color screen appears when I start or reset and press the comm button on the side.
help for me and seichi please
OK guys after beeing in bootloader mode do a g3 or g4 update with a new rom don´t forget to connect the usb cable correctly, see if it works, if it does not tell me what are your problems, bye.
drdisho said:
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Click to expand...
Click to collapse
Listen did you charge the device for 4 hours first on the electricity - step 1
Do a hard reset with the stylus on the device - step 2
press the left com button for 5 seconds on the device, before anything appears on screen - step3
If everything goes well the 3 colour screen will appear.
Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia
Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!
Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......
The same problem, the 2.03TX WWE is a nightmare for me.
I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini
you should flash from bootloader.
I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?
hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..
I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful
Hello
I was sucessfull.
There is a 2 step flash!!!
P-O
I try to use this too but nothing no flash ....
Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...
ok this img of error the image 1 when start exe the other when stat update noid
jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723
I use xp ...
well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.
I try more and more but notuhing
Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723
Hi Everybody. This is my first post here
I own an HTC Touch (Vogue) from Orange (Spain) and I would like to install WM 6.1 on it. Orange does not provide with WM 6.1 and I found on the internet that there is a Sprint version of it, so I decided to install it. I get "Error 270" it says the image is corrupt. I tried to make an splxploit-windows and nothing happens... I took a screenshot (attached file) of what I get... and it stays there. Nothing happens at all.
I tried to install other versions also... HTC Magician and others just to see what happens and always I get "Error 270". The only one I could install successfuly is the Orange Rom
I tried everything and can´t find a solution. Any help there please?
Thanks a lot! =)
PD: I am using Windows XP, ActiveSync 4.5 and in SPLXPLOIT-WINDOWS I am following this steps (I get stuck in step 4)
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM
Any ideas?
This is not a complaint... this is just how I feel::
It is really frustrating to post something for 1st time in a forum looking for an answer and not to get anything in three days.
Welcome to forums
Have a deep read on Wiki here
Also visit Vouge section.
Read, Search, Respect and Enjoy!