I did a hard spl but now I only get a Yang sing and it says that it is hardSpl but my pc doesn't recognize my herald anymore.
How do I install the rom?
Sorry for this threath already found it.
Verry sorry
I have the same issue help?
nm after hours of trying it finally accepted it.
Related
NOt sure if this is in the right topic, but its slightly rom related.
Can someone please help a noob
I cid unlocked my phone following the topic
http://forum.xda-developers.com/showthread.php?t=375583.
all worked well, tried a couple of roms and settled on
L26 WM 6.1 Professional WWE V6a (MMS and JAVA updated) rom, seems to be working ok, certainly all my apps work.
However like a typical noob I missed out on some important reading about hard spl and how it can protect my phone from a bad flash.
Now that I've done all of the above, is it too late to go back and protect my phone with hard spl?
SPL -1.0. Olipof
thanks in advance
I think that's done automatically when you flash hard spl.
(someone correct me if i'm wrong please)
step one in that unlocker would have flashed hardspl on your device, if u skipped it then no, its not too late, you can still do it now
XtreMe_G said:
step one in that unlocker would have flashed hardspl on your device, if u skipped it then no, its not too late, you can still do it now
Click to expand...
Click to collapse
No i didnt skip step one, so I guess I'm covered.
Guys thanks for the help, much appreciated!
Just go into bootloader mode (power button + camera button + reset). If the screen shows SPL-1.0.OliPof then you are ok. If not then just reflash hardSPL.
SPL-1.0.OliPof is there in bootloader.
thanks for the help guys.!
i was thinking the other day and came to wonder about hard SPL. we always stress to the n00bs that it is very VERY VERY important, but then i noticed that the htc rom tool in the kaiser kitchen has a place to build an spl into the rom. can't we just put the spl from hard spl into the rom tool on all of our cooked roms and save everyone a step later? i wasn't sure who to ask and i don't have a kaiser without hard spl with which to test this so i am asking anyone who can answer sorry if i'm not seeing why this can't be done
I think you've forgotten something.
HardSPL is needed to be able to flash your device. So even if HardSPL is baked into a custom ROM, it wouldn't matter. HardSPL has to be installed first, no matter what. Not having HardSPL installed would prevent you from flashing a ROM.
Luckily installing HardSPL ins't really that hard.
meschle's Artemis ROM's have two batch files.
#1 for HardSPL
And
#2 for the CustomRRU.
So First time flashers can't really go wrong.
Ta
Dave
Yeah but hard SPL does not always work the same way. Some get white screen. I got 3 devieces. All 3 original TyTN II's. First one (my first deviece) flashed spl easly. But the other 2 deviece were getting white screen. Finaly I managed to Hard SPl it but in a other way.
xmoo said:
Yeah but hard SPL does not always work the same way. Some get white screen. I got 3 devieces. All 3 original TyTN II's. First one (my first deviece) flashed spl easly. But the other 2 deviece were getting white screen. Finaly I managed to Hard SPl it but in a other way.
Click to expand...
Click to collapse
Good point, I forgot that.
Dave
Hello,
KAISER (o2 realease.
Trying to flash to 6.1.
Sleuth V3 stops at 18% and Lex 26 Diamond V9 @ 16% - Installed as per the excllent Sleuth guidlines.
What am I doing wrong? - Being a newbie, I have suspicions the radio needs and upgrade however - Please can someone point me in the right directions.
Have recovered using Mitty http://forum.xda-developers.com/showthread.php?t=371154
Thankyou Mitty!!
Cheers all
Paul
Have you installed Hard SPL?
Everything you need to know about flashing is here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading start following these instructions and let us know how far you get, before you have problems.
Thanks
Dave
pretty sure he missed the hardspl! use jockeyw hardspls if you want flashing wm 6.1 olipro will also work but its recommended to use a hardspl ripped from a wm 6.1 edition
DaveShaw said:
Have you installed Hard SPL?
Click to expand...
Click to collapse
Thanks for Reply
I have been using JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS.exe - When flashing both rooms - Will study your link and let you know if missed anything
Many thanks for the assistance
Jump SPL is used for Flashing Hard SPL's only. If you have flashed Hard SPL already, then you just plug in your phone to your PC via USB and use the KaiserCustomRUU tool.
Or Flash from SD Card (Instructions in the Wiki).
Thanks
Dave
Hey bro, I had the same problem. Figured out that you need to CID unlock the phone before you flash HardSPL. Fixed it for me. Good Luck!
Vampire2800 said:
Hey bro, I had the same problem. Figured out that you need to CID unlock the phone before you flash HardSPL. Fixed it for me. Good Luck!
Click to expand...
Click to collapse
Unless I'm suffering from amnesia, HardSPL IS the method for CID Unlocking.
I know, but I had to download & run the SID/CID unlocker for the hardSPL to work.
Buggin me bugging you
Hi Guys...
Bugging me
Have unlocked using http://forum.xda-developers.com/showthread.php?t=375583
Have hard flashed http://forum.xda-developers.com/showthread.php?t=354061
No change - still sleuth stops at 18%!!????
Have also tried on 3 different PC's ! and different USB connections on each pc.
Can the experts figure this one out!!? - Have ai not CID unlocked properly it reset to series of 00000's from 02something? -
Wife not pleased now 2 am has been twice with complaints of reset of active sink noises -tradgic....
Paul aka three 2008
For people with broken SPL's, (people who attempted to HardSPL when they did not meet the SPL requirements (>4.0.0.0) there still isn't a fix around. Since I don't have a broken SPL and I'm not about to break my SPL to test this, can someone with a briked herald try the following:
http://forum.xda-developers.com/showpost.php?p=2139462&postcount=41
http://forum.xda-developers.com/showthread.php?t=371154
I once tried to unbrick with MTTY but i never got the correct codes to work...
Maybe someone has luck!
Hi,
It's not true that there's no fix for that. Please don't waste your time with known MTTY commands, it doesn't work.
Read my thread and you will know everything you need to unbrick Herald:
http://forum.xda-developers.com/showthread.php?t=417930
ivanmmj said:
For people with broken SPL's, (people who attempted to HardSPL when they did not meet the SPL requirements (>4.0.0.0) there still isn't a fix around. Since I don't have a broken SPL and I'm not about to break my SPL to test this, can someone with a briked herald try the following:
http://forum.xda-developers.com/showpost.php?p=2139462&postcount=41
http://forum.xda-developers.com/showthread.php?t=371154
Click to expand...
Click to collapse
Ppl c'mon... am puchin in from my fone
Was surfin other threads and i found hard SPLs for various phones...
I have an 8 gig card.. with partitions on it.Would be amazing if i cld just walk around flashing my rom with just an RUU (mayB i underplayed that )
That woud be cool :S
Newe, folks.. do we have a hard SPL or what !??
Thanx!
How about reading the first post in the vox forum???
Well yeah! i HAVE been doing that but they're no really weel spelled out instructions for a hard spl...
What's posted there is a USPL, not HARD
Well, think that sounded a bit rude.
PeaC
The USPL is the only solution, there is NO hard spl. But USPL is fine unless you flash back a carrier ROM (or HTC ROM)!
Aw well
Just hard SPL'd my touch to some 3. sumthin... was a joy to then flash off the card..
Well, just sumthin i'mgnna have to live with then :S
Thanks, newe!
You can still flash unsigned ROMs from SD-Card with USPL. Look in the Vox Wiki!
you will need to do the USPL only if you flash back to signed ROM's.
otherwise you have to just do it just once if you stay with unsigned rom's
Oh lovely
Then if i get this right, all i have to do it copy the ruu to the root of say, storge card (1) and name it to VOX01.* and it'll execute when i soft reset??
Or does it mean that i can run the updater with any (non-official ) rom from my lappy?
Damn I said look in the Wiki: http://wiki.xda-developers.com/index.php?pagename=vox_sdcardflashing