Sprint Touch Pro OTA Activesync Not Working - Touch Pro, Fuze General

Hello,
I just got my Sprint Touch Pro today.. But it will not sucessfully grab my email, calendar, and contacts. The phone can browse the web via the evdo, I was able to configure the settings to point the phone to my works 2003 exchange server (sp2 I believe) when I run activesync on the phone it connects to the server, looks for changes, sees my various emails, calendar, and contact entires and lists them as a number.. but the progress number just jumps to complete not actually transferring the various items.
I do not get any stop errors on my phone.. what do you advise I do? The phone is great, but if it cannot sync up with my server then what is the point... I feel like i have hit a brick wall. Any and all advice is truly appreciated!
~Nrinzema

well i dont know what to say i mean your phone recognizes the sderver but it will not sync the items hmm. . . im lost for word ooo yea microsoft

I was actually quite impressed by the exchange server setup and sync. Just put in my email address and pass, and it automatically configured everything. Went back and tweaked how many messages to bring and such. I thought it was pretty straightforward.
Since I have email going back years, I used my wifi connection to speed things up.

Go to Start-->Settings-->Connection Tab-->"USB to PC"
Then uncheck "Enable Advanced network functionality"
See if that helps.

myculito said:
Go to Start-->Settings-->Connection Tab-->"USB to PC"
Then uncheck "Enable Advanced network functionality"
See if that helps.
Click to expand...
Click to collapse
+1
That usually fixes the problem.

myculito said:
Go to Start-->Settings-->Connection Tab-->"USB to PC"
Then uncheck "Enable Advanced network functionality"
See if that helps.
Click to expand...
Click to collapse
That worked for me as well thanks!

Related

ActiveSync on ALL 6.1 ROMS don't sync with Exchange Server 2003

Hi all,
I've tried all 6.1 roms and have found that Active Sync refuses to sync via 3G wirelessly with Exchange Server 2003.
I did:
Uncheck proxy.
Reloaded local telecomm settings
tried sync cal, contacts, individually with no go.
Did hard reset all roms after flash
Any comments/ suggestions would be appreciated.
Many thanks.
Avi
Not sure, working for me.
Maybe its your radio?
Works fine for me, on every single WM6.1 ROM I have tried.
There must be something wrong with your specific config.
Ditto. No problems here on many roms and radios
AvinashDhaniraj said:
Hi all,
I've tried all 6.1 roms and have found that Active Sync refuses to sync via 3G wirelessly with Exchange Server 2003.
I did:
Uncheck proxy.
Reloaded local telecomm settings
tried sync cal, contacts, individually with no go.
Did hard reset all roms after flash
Any comments/ suggestions would be appreciated.
Many thanks.
Avi
Click to expand...
Click to collapse
did you add the ssl cert?
No Problems
I have tried at least 5 different 6.1 ROM's and they have all synced with our Exchange 2003 cluster over 3G.
I have too any problems with Active-Sync on MS Exchange 03......
might be useful if you gave us more details.
Such as, does it sync over wireless lan, or activesync or anything.
Does it give an error code of any sort ?
If you have not figured this out already.. this may resolve the issue
You need to disable the proxy:
go to Settings --> Connections --> Connections --> Advanced (tab at bottom of the page) --> Select Networks.
Change the network from 'My ISP' to 'MEdia Net', then click Edit. Now you should have the Proxy tab where you can disable it.
rjefferis said:
might be useful if you gave us more details.
Such as, does it sync over wireless lan, or activesync or anything.
Does it give an error code of any sort ?
Click to expand...
Click to collapse
I disabled proxy server. It connects via active sync (3G) then says Synchronizing folder....Looking for changes.....then it says "attention required" Sync could not be completed. If condition persists try deleting then re-creating....view support code ...0x8503001C
works for me just fine, i run on ssl but i just tested with non ssl and work fine, what is the error message that active sync gives?
exstatica said:
works for me just fine, i run on ssl but i just tested with non ssl and work fine, what is the error message that active sync gives?
Click to expand...
Click to collapse
0x8503001C
odd...but try this.
Go under your settings after setting up everything normally, and uncheck tasks from the things that will be sync'd.
Worked for me.
AvinashDhaniraj said:
I disabled proxy server. It connects via active sync (3G) then says Synchronizing folder....Looking for changes.....then it says "attention required" Sync could not be completed. If condition persists try deleting then re-creating....view support code ...0x8503001C
Click to expand...
Click to collapse
any flavor of the 6.1 works on me also. can you check if your exchange account has mailbox size limitations. i once encountered your scenario and it was caused by my mailbox size limitation.
if this is the case either request that your mailbox limitation be increased or archive your server data on a pst located in your local cmputer.
just a thought.
Actually I'm having an issue when trying to sync my Kaiser with WM 6.1 with two different computers: If I set up the active sync connection on the second computer, syncing on the first computer will always fail until I reestablish the connection. If I do this, syncing on the second computer will fail.
Is this going to be fixed in the final WM 6.1 version?
obii
I assume you had this working on the same phone, same Exchange server but with WM6?
For OTA, are you able to browse (using PIE) to https://your-activesync-public-server-name/oma ? (or http if you're not using SSL)
Internally on your LAN are you able to browse on your PC AND phone, to http://your-activesync-private-server-name/oma ? (or https if you're not using SSL internally as well)
Either way, it works perfectly fine for me using WM6.1...
I had the same problem with my activesync, my work exchange is 2003 as well. It was having a lot of problems on the initial sync so i connected to my wifi and i think because of just how much stuff i synced it helped. Once the initial sync was completed I have problems from time to time with it not being able to connect and a soft reset does the trick. I was getting the same exact support code you were as well.
That error code indicates a corrupt calendar or contact entry. Any device would fail regardless of WM5 - WM6.1. You can change your setting so that it does not sync calendar and contacts to see which it is. Then you can use a process of elimination to find out which entry is the bad one and delete it from the message store.
JonnoB said:
That error code indicates a corrupt calendar or contact entry. Any device would fail regardless of WM5 - WM6.1. You can change your setting so that it does not sync calendar and contacts to see which it is. Then you can use a process of elimination to find out which entry is the bad one and delete it from the message store.
Click to expand...
Click to collapse
I had that same error code before and it wasnt a corrupt Calendar entry, it was a huge one because it had a couple file attachments. If i did my initial setup in a 3G area or on WiFi it worked fine.
AvinashDhaniraj said:
0x8503001C
Click to expand...
Click to collapse
That's a quit unusual errornumber. I work a lot with Exchange and had to debug active sync problems very often. Here you can find a quite usful list of errornumbers, their meaning and possible solutions: http://www.pocketpcfaq.com/faqs/activesync/exchange_errors.php
The error you get itn't on the list unfortunately. Is a wired sync possible?

email Setup issue after WM 6.1

I always managed to setup my email automatically (windiows mobile 6 will connect to my email service provider and downlaod settings automatically).
I tried now 2 offical WM 6.1 ROMs but no luck, I can not setup my email any more neither automatically nor manually.
I am sute the issue is in GPRS connection (but I can use IE to connect to the internet) or in WM 6.1 itself.
did anybody noticed the same thing, and are there any work around this issue.
thanks
Many have this issue. Did you try searching?
I usually start off with, "I will make the assumption that your device is a Tilt". Then I state, "You need a few tools and change some settings". So here is another reenactment of previous post.
First you need to install attsettings.cab
Next, go to start>settings>connection>connection>advanced>select networks>Change both drop down menus to medianet>click edit on both>click proxy settings tab on both>and uncheck everything
Third, set up your email without saving your password.
Forth, install removehiddenproxy.cab
Fifth and finally, go back to your email settings enter your password then save.
You will be all set from here....
Wow, thanks, I did try to search but did not see this. Why all of this, what is the core issue behind it.
thanks again
one thing I fogot to mention, I do not live in the UK and my service provider is not AT&T, does this solution still applicable to me
thanks
worked for me
It is difficult to search for some solutions. I too searched and finally landed here. Thank you much, as your solution enabled me to send and receive email. Although it would connect to the internet with a browser just fine, it kept giving me connection errors when synchronizing.
I have the L26_Kaiser_Diamond_V7 rom installed.

microsoft activesync

hope someone can help me
my TD2 dont sync wit microsoft sync
did everything it told me to do but still no changes
hope somebody responses
Got to Setting on the TouchFlo bar, select All setting, go to the Connections Tab, select USB to PC, select the radio button for active sync and make sure the "Ask me" check box is filled in.
Try turn off your antivirus..
...
the_turt1e said:
Got to Setting on the TouchFlo bar, select All setting, go to the Connections Tab, select USB to PC, select the radio button for active sync and make sure the "Ask me" check box is filled in.
Click to expand...
Click to collapse
dit all wath you guys told me to do but still dont connect with active sync
roosen said:
dit all wath you guys told me to do but still dont connect with active sync
Click to expand...
Click to collapse
Your best option is to contact Microsoft.
piszkot said:
Try turn off your antivirus..
Click to expand...
Click to collapse
you mean the firewall, that can block activesync as it is a network connection!
You can try as well to uncheck the "Enable faster data synchronisation". That caused some problems to me on my Touch Diamond. On the Diamond 2 I have it checked and no problems.
To be found as well under Settings->Connections->USB to PC
BeeGee_Tokyo said:
You can try as well to uncheck the "Enable faster data synchronisation". That caused some problems to me on my Touch Diamond. On the Diamond 2 I have it checked and no problems.
To be found as well under Settings->Connections->USB to PC
Click to expand...
Click to collapse
thnx you guys it works it was the firewall that blockt it
grtz
Problems with synchronising
anyone can share how to synchronise my calendars, contacts, tasks, notes, emails, and appointments? asi i'm unable to check these options when i turn on my windows mobile device center. (The only thing that it synchronises is the music and video files..) Many thx...

two issues with my fuze(fixed)

honestly, I tried to fix this myself I searched the forums for a fix but i just cant find something that works.
The first issues is my phone wont use the web. I get this error every time I try to use opera
"ERROR! The remote server refuses to perform the request. The address is available".
this used to happen rarely on my phone before i updated my stock ROM. I was able to fix it with a soft reset, but now I cant do anything to fix it.
Second my phone will not sync with my computer so I can't add/remove files from it. when I connect it I hear a double tone sound from the PC and then nothing happens. my phone used to give me an option on what to do when I connected the usb cable. now nothing happens.
SinnerChrono said:
honestly, I tried to fix this myself I searched the forums for a fix but i just cant find something that works.
The first issues is my phone wont use the web. I get this error every time I try to use opera
"ERROR! The remote server refuses to perform the request. The address is available".
this used to happen rarely on my phone before i updated my stock ROM. I was able to fix it with a soft reset, but now I cant do anything to fix it.
Second my phone will not sync with my computer so I can't add/remove files from it. when I connect it I hear a double tone sound from the PC and then nothing happens. my phone used to give me an option on what to do when I connected the usb cable. now nothing happens.
Click to expand...
Click to collapse
Any more info that you can provide. Such as ROM type version. Radio. This will help us to help you.
oh crap, i forgot.
I'm just using the stock att fuze rom and radio(1.14.25.35) from the official update.
To fix your problem with Opera, open it up and goto the address opera:config
Then go down and click on proxy and clear the fields for http server and https server. Then hit the save button.
As for your syncing problem, what version of windows is on your pc? If it's XP, launch active sync from there and goto the options and make sure the option to allow usb connections is checked.
xviiivx said:
To fix your problem with Opera, open it up and goto the address opera:config
Then go down and click on proxy and clear the fields for http server and https server. Then hit the save button.
As for your syncing problem, what version of windows is on your pc? If it's XP, launch active sync from there and goto the options and make sure the option to allow usb connections is checked.
Click to expand...
Click to collapse
Thanks that worked.
As for my pc, im using XP sp 3.
and active sync setting was already checked off.
Okay, i fixed it!
go to your connection settings and then to "USB to PC" uncheck "ask me frist..." save the settings then soft reset your phone and reconnect your usb once it has booted. then it worked(did a bunch of crazy sounds). went back to "USB to PC" and added the check mark and now its acting like it should be.
Thanks for the help guys.

Dutty's Task Manager kills Twitter

I absolutely love that Dutty's Task Manager works on the Leo, and it has brightened my day.
However, since installing my Twitter client won't connect. I've heard others have this problem too.
I'm on a dutch (0413) HD2, running the stock ROM (1.43.404.1 [70124] NLD), Manila v2.5.19202525.0
I've checked with only GPRS and with HSDPA active, and in both circumstances the Twiitter-app not only can't register, it doesn't even make the phone connect to data (the taskbar does not show a connection being made) so it's not my internetconnection that's at fault, the Twitter app doesn't even try to connect to the 'net anymore.
Anyone with a good idea what might be the cause of this?
I had a similar problem yesterday and I never even installed the Task manager. I had simply logged out of my Twitter account (don't remember why I did that) and couldn't log in again. It said my password or account name were wrong (they weren't).
Try logging into a different Twitter account (create a new one if you need to) and then into your own again, that worked for me.
Robrecht said:
I had a similar problem yesterday and I never even installed the Task manager. I had simply logged out of my Twitter account (don't remember why I did that) and couldn't log in again. It said my password or account name were wrong (they weren't).
Try logging into a different Twitter account (create a new one if you need to) and then into your own again, that worked for me.
Click to expand...
Click to collapse
See, mine just tells me the network is unavailable... without ever trying to connect.
If I turn off the dataconnection before trying a Twitter update, it never reconnects when it says it's updating... and then tells me the network is unavailable.
In other words, the Twitter app doesn't know how to find the internet connection anymore.
Holy Bear said:
See, mine just tells me the network is unavailable... without ever trying to connect.
If I turn off the dataconnection before trying a Twitter update, it never reconnects when it says it's updating... and then tells me the network is unavailable.
In other words, the Twitter app doesn't know how to find the internet connection anymore.
Click to expand...
Click to collapse
did you ever find a solution to this?
i have the same problem but with google map
i cant login
it say login in ....... and nothing happen
i try different version but no lack
I also have the same problem, but mine started to happen after I installed Comm Manager Pro. Can someone confirm that logging into a different account helps? In my case, it doesnt say the login or password is incorrect and it doesn't argue about the internet connection. It just doesn't update and doesnt show any tweets on the list
To me two accounts helped. (Comm manager and task manager installed).
However I still see as a bug that Peep, Location/Weather does not update correctly. Hope new rom 2.x will fix it.
Vlk_77 said:
To me two accounts helped. (Comm manager and task manager installed).
However I still see as a bug that Peep, Location/Weather does not update correctly. Hope new rom 2.x will fix it.
Click to expand...
Click to collapse
Are you on KPN?
Then my sollution for the location/Weather bug, go to the Settings tab, Menu, More, Connections, Connections, Edit existing connections, click Edit on the KPN Mobiel Internet, click next, empty the Accespoint field, click next, click apply and save settings.

Categories

Resources