No, not a ROM flash: I want to completely erase every last piece of data in my Tilt and install the SPL, OS, and radio from scratch.
As far as I can tell, FrankenKaiser will do that, but it (in theory) only works with the radio from hell... which I have, albeit the "_patched" version...
I am trying to work from a clean slate, rather than flash another ROM... trying to clear up a problem that I think can only be fixed by such a drastic move... and of all the posts I've seen, (unless I'm retarded - quite possible) none has addressed such a move. Is FrankenKaiser the solution? If so, do I need to put the radio from hell on first? If it's not the solution, what is? Or is there one at all?
Thank you
drunkbastard said:
No, not a ROM flash: I want to completely erase every last piece of data in my Tilt and install the SPL, OS, and radio from scratch.
As far as I can tell, FrankenKaiser will do that, but it (in theory) only works with the radio from hell... which I have, albeit the "_patched" version...
I am trying to work from a clean slate, rather than flash another ROM... trying to clear up a problem that I think can only be fixed by such a drastic move... and of all the posts I've seen, (unless I'm retarded - quite possible) none has addressed such a move. Is FrankenKaiser the solution? If so, do I need to put the radio from hell on first? If it's not the solution, what is? Or is there one at all?
Thank you
Click to expand...
Click to collapse
This is possible, but why?
After you wipe your phone you will be re-flashing the ROM / Radio and SPL anyway.
If you do do this, make sure you read and understand the process (and what the pre-requisites are first).
Ta
Dave
Install Sleuth's V_3.0 WM6.1. I have moddified a version with Jocky to work with that OEMSBL version.
I will PM you with a link for the moddified FrankenKaiser, hey that sounds familiar, ohh yeah, Jocky let me name it!
HOWEVER, I think I'd try a few other things first. Like check the Radio Protocol. On boot does the red protocol version end in H or W? W is not for US & can create issues with 3G. Also, you can try using MTTY with my G3SPL MFG_SPL to fomat a few thing & to flush out Nand blocks. Many things to try before venturing to FK. I know you PM'd me, but I've been a wee bit busy, I'll make a little time if I can help though. Try me on MSN/Live Messenger [email protected] (Even if it says "Offline" give it a try, I may just be lurking)
Protocol ends in H, currently using the Neon 1.58.25.17 radio, I have tried virtually every other 6.1 radio in existence, and about a dozen different ROMs, including the stock AT&T and letting the bloatware install just for poops and giggles. But not the one that you suggested GS, what the hell, one more ROM flash ain't gonna hurt...
I am reticent to think it's a hardware issue because the G and H icons do appear, I just can't get a connection, and it all happened while using the GPS (LiveSearch and HTC GPS Tool specifically). If it was hardware related I would imagine that I wouldn't get the icons, it would just show no service.
Also, the reason I wanted to do a complete whitewash is because, even when installing a new ROM, I have noticed that certain traces and settings remain from days gone by (certain registry settings, POP3 accounts, etc), which I find odd.
I would be interested in the MTTY approach, a link would be appreciated... running out the door now to go play bar manager...
Sorry GS, didn't wanna seem impatient, just trying to get a wider input as to a solution, so I can (a) fix mine and (b) maybe suggest to others (a bunch from what I've seen, here and elsewhere) with the same problem, rather than everyone sending them to AT&T / HTC for replacements.
Personally, I think that the 3G issue is some corruption somewhere in the phone's firmware that a ROM/radio/SPL change doesn't affect, and - as much as I hate to invoke such people - the guys at AT&T that looked at it believed the same, didn't think it was an antenna issue (although the widespread belief is that it IS, and furthermore that anyone working at AT&T is a dolt - which IS usually the case). Far be it from me to be naive, but one would think that if this was as widespread a problem as it is and was hardware related that there would be a recall, which there hasn't been.
Again, thanks to everyone for their assistance.
So, I guess the next question is... how do I use MTTY to, as GSLEON suggested, flush out the bad blocks?
Again, thanks in advance to anyone who can help me.
go ahead and read up on this post. It will explain everything for you...
http://forum.xda-developers.com/showthread.php?t=371154&highlight=MTTY
drunkbastard said:
No, not a ROM flash: I want to completely erase every last piece of data in my Tilt and install the SPL, OS, and radio from scratch.
...
Thank you
Click to expand...
Click to collapse
You could try this: http://en.wikipedia.org/wiki/Neutron_bomb
No seriously, which way do you flash a rom ?
Just flash and basta? Flash and HR after that ? Have tryed with a different computer /os ? From SD card ? I had some reminiscent traces of previous roms if I didn't hard resetted after the flash.
Dredd67 said:
You could try this: http://en.wikipedia.org/wiki/Neutron_bomb
No seriously, which way do you flash a rom ?
Just flash and basta? Flash and HR after that ? Have tryed with a different computer /os ? From SD card ? I had some reminiscent traces of previous roms if I didn't hard resetted after the flash.
Click to expand...
Click to collapse
Thought about it, but motherf*%$# Al-Qaida has made getting my hands on one so difficult.
I flash from a WinXP PC, have not tried another one because this is the only one I can get my grubby little hands on, flash / HR. Have not tried from SD card. I have had traces of old ROMs as well - I tired using PDAUltimate v6 and still had the splash screen from Garmin 4.4c... odd... that and other incidents of remnants of ROMs gone by.
You may want to check here and see if there is anything that may apply. (This is coming from someone that had a 3G failure.)
http://forum.xda-developers.com/showthread.php?t=400610&highlight=JohnJonsten
drunkbastard said:
I am reticent to think it's a hardware issue because the G and H icons do appear, I just can't get a connection
Click to expand...
Click to collapse
Well, that IS the usual behavior when the radio hardware goes poof, many people including myself experienced it. In the end GPS failed too on mine, as well as the GSM radio, and the phone was always running hot and draining batteries extremely quickly.
See the link posted by John.
The quick and dirty of it is....
1. The Icon lighting up means the radio and protocol is correct to talk on the correct 3G bands in your area
2. From what I have been able to gleen on how the 3G signaling works (not an expert here) it is basically GSM signaling for the UMTS/HSDPA Voice/data path buildup.
3. It is most interesting to go to an area that has non PCS band 3g, use field test to verify this if you want, you can lock your phone on edge and use voice and data 850, but will not be able to build up a UMTS/HSDPA connection on 3G. You need to go to a non PCS area as I have seen for the most part in Seattle they run the edge net on 850 and 3G on PCS frequencies.
kilrah said:
Well, that IS the usual behavior when the radio hardware goes poof, many people including myself experienced it. In the end GPS failed too on mine, as well as the GSM radio, and the phone was always running hot and draining batteries extremely quickly.
See the link posted by John.
Click to expand...
Click to collapse
Related
Hi,
I have my treo 750 updated to wm6.1 and with showing H enagled connection is max about 440kbit... not higher but with the same sim and nokia 6120 with hsdpa i Have about 900kbit... its everything not only one one location... i tried many radios...with some its worse... not better... which to use please ?
thx
not 1.54.30.10
tmknight said:
not 1.54.30.10
Click to expand...
Click to collapse
Reason? I'm using 1.54.01.00 and I lose service at least twice a day. I have to turn the phone off and back on just for it to find signal again...so annoying...
tmknight said:
not 1.54.30.10
Click to expand...
Click to collapse
You know, it would be nice if just ONCE, instead of this stock response you give everyone who asks about a radio, you actually offered up some information that someone could use. For example, not everyone knows that if you use 1.54.30.10 you are stuck with it ... granted, it's mainly because not everyone reads the forums, but if you are going to bother responding, then at least give the newbs somthing to go on.
I am having radio problems myself since I upgraded to the cooked full version of WM6.1 and am also looking for the best solution.
I am using 1.54.01 now too, and my radio reception in Ohio with AT&T is worse than the WM6 2.25 AT&T version, and battery life is worse too. I am going to try to downgrade to 1.47.02 which was listed on the site with the WM6.1 to see if it works better.
Here's an update ...
1.47.02 was also a bust for me. I didn't test battery life, but the reception was bad enough I decided to try something else.
I finally was able to figure out that the radio that comes with AT&T's WM6 Desktop Updater is 1.54.27.00. I have decided to go back to that radio which was working well when I was on WM6.
Sorry, but I don't know how to extract a radio ROM, and I haven't been able to find it anywhere separately, so I had to go the long way to get back to it. There is probably an easier way to do this, but I'm a newb on flashing, so this is what I had to do:
1) Hard SPL the Treo. Note, when I did this to mine it did not go through step 3, so it did not re-flash the radio, and it kept the SPL version on the device. This is why I went looking for a new radio.
2) Revert to WM6 using the SD card update method. Get it here.
3) Install the WM6.1 ROM using the SD card update method. Get it here.
This radio has given me the best results for AT&T in central Ohio as far as radio stability and signal strength. YMMV, but I'm going to stick with it until something better comes along.
If anyone has the skills to extract this radio (1.54.27.00) from the main ROM, it might be of help to others.
startngate said:
Here's an update ...
1.47.02 was also a bust for me. I didn't test battery life, but the reception was bad enough I decided to try something else.
I finally was able to figure out that the radio that comes with AT&T's WM6 Desktop Updater is 1.54.27.00. I have decided to go back to that radio which was working well when I was on WM6.
Sorry, but I don't know how to extract a radio ROM, and I haven't been able to find it anywhere separately, so I had to go the long way to get back to it. There is probably an easier way to do this, but I'm a newb on flashing, so this is what I had to do:
1) Hard SPL the Treo. Note, when I did this to mine it did not go through step 3, so it did not re-flash the radio, and it kept the SPL version on the device. This is why I went looking for a new radio.
2) Revert to WM6 using the SD card update method. Get it here.
3) Install the WM6.1 ROM using the SD card update method. Get it here.
This radio has given me the best results for AT&T in central Ohio as far as radio stability and signal strength. YMMV, but I'm going to stick with it until something better comes along.
If anyone has the skills to extract this radio (1.54.27.00) from the main ROM, it might be of help to others.
Click to expand...
Click to collapse
A lot of members has the skill and can extract the radio fine. The problem is, they now got themselves a kaiser, some got polaris and others even got a Diamond to play with and as I speak, they're now busy playing with their new toys so, I don't think they will bother extracting the radio 1.27 from AT&T just as much as no one even bothered to help those who are stuck with radio 1.54xxx.
How do I tell what radio version I am using?
When I go to the about in the settings. it does not say anything about radio. it says
Software version:
TREO750-2.18-VFE
Hardware version:
A
.....
Firmware version:
1.47.02.000
CC-Cap:
CFG-AU-009
does this mean 1.47.02.000 this the radio version?
dennis.l said:
How do I tell what radio version I am using?
When I go to the about in the settings. it does not say anything about radio. it says
Software version:
TREO750-2.18-VFE
Hardware version:
A
.....
Firmware version:
1.47.02.000
CC-Cap:
CFG-AU-009
does this mean 1.47.02.000 this the radio version?
Click to expand...
Click to collapse
Yes it does.
http://rapidshare.com/files/70738515/Treo750Radio1.47.02.zip
I have been having a lot of distortion problem with my Vox. So help me out. Currently I am using 4.1.13.60_03.18.90.
Kindly vote and tell your experience with different versions.
I never had any problems with 03.10.90! But then again my state is fairly good covered (Saxony). I think only like 2% of the area is not covered with GSM (and lately more and more with EDGE too)!
I plan on giving a thorough test of all the later versions once I re-assemble my mobile. I also noticed high distortion on 4.1.13.60_03.18.90 immediately after flashing. I am led to believe this was a small reason my ear piece failed, the distortion and higher volume 'popped' in and it would no longer function properly, heck, it could also have been since it was quite old too.
Anyways, for good measure I will be reverting to 4.1.13.47_02.98.90, I never had issues with the radio shipped from the factory and coverage was no problem. I suggest you downgrade before any hardware has a chance at being ruined.
h4waii is true. I have installed several radios and I have found 4.1.13.47_02.98.90 the best especialy for areas with weak signals.
h4waii said:
Anyways, for good measure I will be reverting to 4.1.13.47_02.98.90, I never had issues with the radio shipped from the factory and coverage was no problem. I suggest you downgrade before any hardware has a chance at being ruined.
Click to expand...
Click to collapse
I read your thread that you are reassembling your phone. I hope you will put a video guide for others too. That will be very useful.
I was reading through forum and I came across a post in which he had said that he pulled out the battery and put it after a few hours and things were back to normal. Well I tried it and I dont know what is the logic but it worked. Still echos on high volume but other reception distortion is gone.
Can radio damage your phone? Mine was shipped with v4.1.13.54_03.10.90.
@frauhottelmann
You have cooked a lite rom and it is not with latest XIP. Why you and Gonzo are not updating their Roms. Lefab also not working on WM6.1 Rom. Only one working is Hikey, and he does not have a thread here. I requested him in post but he refused by saying their are already too many roms here. Is it possible to hope that one of you will bring a clean Rom with latest XIP. New XIP is much faster.
i use v4.1.13.60_03.18.90
I have never noticed this distortion you mention
I can tel you why I never did continue cooking. There are three reasons:
1) I simply got tired. It is in fact a quite annyoing process. Espacially working on a 96dpi ROM, everytime you fixed something another problem turns up.
2) I experimented with OSs on my computer (from XP to Vista to Server 2008 to Vista and in the end of the week back to XP - the switching back is due to hardware problems) lol And cooking under anything else then XP is not quite safe and I experienced more problems under Vista!
3) Nobody ever requested a new updated Lite ROM (at least until now ^^) because people usually just download the stuff and don't report back unless there is a problem (you get sick of that too!)
Hey I will have time next week, so I will probably make Lite 3.0 with new XIP...the problem is that I don't have the Sys and OEM folders anymore, so I will have to start from scratch...
frauhottelmann said:
I can tel you why I never did continue cooking. There are three reasons:
1) I simply got tired. It is in fact a quite annyoing process. Espacially working on a 96dpi ROM, everytime you fixed something another problem turns up.
2) I experimented with OSs on my computer (from XP to Vista to Server 2008 to Vista and in the end of the week back to XP - the switching back is due to hardware problems) lol And cooking under anything else then XP is not quite safe and I experienced more problems under Vista!
3) Nobody ever requested a new updated Lite ROM (at least until now ^^) because people usually just download the stuff and don't report back unless there is a problem (you get sick of that too!)
Hey I will have time next week, so I will probably make Lite 3.0 with new XIP...the problem is that I don't have the Sys and OEM folders anymore, so I will have to start from scratch...
Click to expand...
Click to collapse
Hmmm you are quite right about the feedback thing. If you work hard on something it no one appreciates it obviously it hurts.
Well atleast I will wait for your new rom. I hope you do something about java. Add jebed or provide link to cab for you new rom.
I did tried your rom, I would have kept it but new XIP is much faster so I had to switch.
@tipu2185;
While a radio in itself can't really damage your hardware, issues caused by it can. Such as high distortion and crackling, this can ruin a speaker. With the right software, hardware can be destroyed.
I've already re-assembled the Vox after replacing both the vibrate motor and the inner ear piece. It's fairly straight forward. I didn't bother to take any pictures as there is a service manual which indicates step-by-step how to do this.
h4waii said:
@tipu2185;
While a radio in itself can't really damage your hardware, issues caused by it can. Such as high distortion and crackling, this can ruin a speaker. With the right software, hardware can be destroyed.
I've already re-assembled the Vox after replacing both the vibrate motor and the inner ear piece. It's fairly straight forward. I didn't bother to take any pictures as there is a service manual which indicates step-by-step how to do this.
Click to expand...
Click to collapse
Can you link to that service manual. I might need it later some time.
Tipu2185,
How are you finding this radio version so far? Have yor initial problems gone?
2frustrated said:
Tipu2185,
How are you finding this radio version so far? Have yor initial problems gone?
Click to expand...
Click to collapse
Yes it is working fine now
Where?
I want to installl Radio v4.1.13.60_03.18.90, but I can't find it anywhere. Anyone care to provide a download link?
Thanks!
DUTCH said:
I want to installl Radio v4.1.13.60_03.18.90, but I can't find it anywhere. Anyone care to provide a download link?
Thanks!
Click to expand...
Click to collapse
check the wiki in first two sticky threads. It is there
tipu2185 said:
check the wiki in first two sticky threads. It is there
Click to expand...
Click to collapse
I searched for 20min and finally found it! http://forum.xda-developers.com/showthread.php?t=402778
Thanks!
Hey guys and experts,
I was browsing through the forums and I came accross the radio thread. I'm extremely confused with it and I'd also like to improve the performance of my 3G and all that. I've been looking around the site but I haven't found anything like an instruction or guide on how to do all that stuff. So I'd like to get some help from you guys if you don't mind.
1) First of all, in regards to version numbers, higher number does not mean it's better right? My radio version is 1.02.25.32 and my 3g reception is spotty and so are my calls sometimes.
2)Another question is, due to the fuze being my first winmo phone ever, when you guys mean security unlock, do you mean the phone being able to use any sim card from any carrier or does it carry a deeper/different meaning. I did get my phone unlocked by calling ATT and asking them for the code in which I provide the IMEI and they gave me a code, the problem is, I'm not sure if it's the same "unlock" that you guys are talking about. (the radio thread said something about having the word security unlocked on the tricolor boot screen, but my phone has the stock ATT rom in it, so I suspect that it might now show)
3) I'm probably inept at searching through forums so I couldn't find any thread that has full instructions on how to change the radios and all that. I'm wondering if anyone can point me to such a thread on how to do that.
I do apologize for such a long post and also the possibility of this question/request being asked already. If you do read through to here, thank you for your time, I'd appreciate any help that is provided.
Higher doesn't necessarily mean better. The poll results give a pretty good indication of overall happiness with any given radio. Based on that, I ditched .32 for .28.
Security unlock is more than SIM unlock. In addition to being sim-free, a security unlocked device can load the radio ROM from another device family.
Check the flashing guides. Essentially, you must load hard-SPL first. That allows you to freely load radios and roms. Always do your research before loading a radio rom though! Radios are the hottest battleground of the spy vs. spy games played by Operators and XDA developers. Operators don't want you changing radios or ROMs and they are always coming up with software that won't allow itself to be changed. If you flash a radio on that has this issue you could be stuck with it. So far, I don't believe any of the radios in the radio thread have issues. You must security unlock before flashing any non Raphael radio however.
Gotcha. Thank you so much for taking the time to reply to me. I'm going to test out a different radio so that maybe I can get better reception. I spend most of my time on edge for some reason.
EDIT: I just noticed that installing HardSPL will clear my PDA of all data. I'm wondering if Sprite Back up is good enough as a backup program or do you suggest something else. I did a bunch of tweaking on my fuze like the PTT remap, camera tweak, network selection, etc etc.
Oh, I did forget to ask what's the favorite back up software for the XDA forum goers. I'm looking for a software that will back up all the tweaks and stuff that I did to the pda before I run HardSPL
*bump to page 1*
1 last bump.
Suggestion on back up softwares please?
I don't think HardSPL clears your phone of all programs and data. That said, I tried to search on that to be sure but couldn't find any confirmation.
Obviously, flashing a ROM will definitely clear all data.
Dunno about flashing a new radio.
There was a particular warning on backing up your data before flashing HardSPL, so I wanted to be on the safe side, the main thing now is that I'd like to find a back up software that will back everything up (registry changes, programs installed, various settings) pretty much everything I did.
I wanted to know, if there are any risks involved by using the radio's on this site:
http://www.crc.id.au/files/xda/Radio_Roms/
I've heard that it's impossible to overwrite the 1.54.30.10 radio version. Are there others like this?
I'd also like to know if it's possible to return to the Palm supplied radios in case I find these Hermes radio's unfit for duty, or if anyone has experience in reverting back to Palm radios.
Thanks for replies. (sorry if this post looks odd, it's a WAP post >_>)
mangatron said:
I wanted to know, if there are any risks involved by using the radio's on this site:
http://www.crc.id.au/files/xda/Radio_Roms/
I've heard that it's impossible to overwrite the 1.54.30.10 radio version. Are there others like this?
I'd also like to know if it's possible to return to the Palm supplied radios in case I find these Hermes radio's unfit for duty, or if anyone has experience in reverting back to Palm radios.
Thanks for replies. (sorry if this post looks odd, it's a WAP post >_>)
Click to expand...
Click to collapse
Any of the radios should be fine to flash to your phone. Do you need to? It's up to you, but if your phone is working OK already, then you probably don't need to flash a radio. Like I said, it is still OK to flash Hermes radios (since the Hermes and Treo 750/Cheetah are pretty much the same).
I would advise against 1.54.30.10 radio, it is a good radio, but it is VERY DIFFICULT to flash over it.
Is there any advantage to these later radios? Better reception/speed/etc?
So I flashed firmware 1.50.00.00 and it seems like it can't be overwritten, no matter what method I used to flash over it (USB or Mini SD)
Any ideas as to how to really overwrite these firmwares?
Pretty Much Screwed
Flashed a hermes rom and bricked my Treo 750 can't get it to load past windows mobile screen. If anybody knows anything let me know. Thanks.
Arc, can it go into the bootloader? Do this by pressing the PTT buttom, and the reset button next to the card reader. Search and you can find how to flash via sd, this should fix your problems. By the way I-DEN is the type of phone, not a network. Nextel uses CDMA, which is why I have an IPhone on nextel.
I can get into bootloader and have tried flashing orig. wm6 rom, wm5 rom, extracted radio from it and flashed just radio, and flashed some more hermes roms because I was getting no where. Best I can tell radio is fried, ran the info command from mitty and gave an error when it tried to pull info from the radio. BTW thanks for correcting me on IDEN it is a technology not a network, how did you get an iphone on a cdma network?
arc20052000 said:
I can get into bootloader and have tried flashing orig. wm6 rom, wm5 rom, extracted radio from it and flashed just radio, and flashed some more hermes roms because I was getting no where. Best I can tell radio is fried, ran the info command from mitty and gave an error when it tried to pull info from the radio. BTW thanks for correcting me on IDEN it is a technology not a network, how did you get an iphone on a cdma network?
Click to expand...
Click to collapse
Those are the consequences my friend of flashing roms that are not designed from your phone even if they are extremely similar radios, roms, hardspl etc...your phone is different than hermes, kaiser or other. Even under the same HTC devices, they seem to be very similar but they are pretty different.
Hi,
I am on a mission today, to upgrade my phone. Currently I have Windows Mobile 5.2.21812 and its very unstable.
I know nothing about flashing these, as I bought the phone from EBAY not knowing it had Windows Mobile 6.5 on it.
I notice reading in the forums, I need to know if its CDMA, or GSM etc ? How would I tell that please? Phone is HTC Touch Pro.
Many thanks.
Stevey G
steveyg said:
Hi,
I am on a mission today, to upgrade my phone. Currently I have Windows Mobile 5.2.21812 and its very unstable.
I know nothing about flashing these, as I bought the phone from EBAY not knowing it had Windows Mobile 6.5 on it.
I notice reading in the forums, I need to know if its CDMA, or GSM etc ? How would I tell that please? Phone is HTC Touch Pro.
Many thanks.
Stevey G
Click to expand...
Click to collapse
If your phone has a SIM Card Slot then its a GSM Model. If it has no SIM Card then its CDMA.
Ohhhh I see Thank you ever so much.
Would this be the right ROM to use - just making sure, before I start to read all the instructions ..............
http://forum.xda-developers.com/showthread.php?t=536751
You didnt say what phone you have - so we cant tell!
If you have a GSM phone (sim card) then you want to start reading here If however you have a CDMA phone (no sim card) then here would be a good place to look
Beeble said:
You didnt say what phone you have - so we cant tell!
If you have a GSM phone (sim card) then you want to start reading here If however you have a CDMA phone (no sim card) then here would be a good place to look
Click to expand...
Click to collapse
I did, if you read my first comment above, look at the end you will see HTC TOuch Pro
Anyway.........
I notice several things I don't understand - RADIO, UC Capable & SPL Version as found here....
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Cooked_WM6.5_ROMs
Could someone explain please?
Anyone able to assist ?
steveyg said:
Anyone able to assist ?
Click to expand...
Click to collapse
Steveyg, Touch Pro's are CDMA too. No one wants to help you if you're going to brick your device. Are you GSM or CDMA? We will assist as much as possible, but help us by answering that simple question.
Ohhh I understand now
Mine is a phone with a SIM, thus GSM is that correct?
steveyg said:
Ohhh I understand now
Mine is a phone with a SIM, thus GSM is that correct?
Click to expand...
Click to collapse
Yep, you should be good to go. Now,
steveyg said:
I notice several things I don't understand - RADIO, UC Capable & SPL Version as found here....
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index...ked_WM6.5_ROMs
Could someone explain please?
Radio is comparable to something like your WiFi card in your laptop. Depending on your location, etc, some radios are better than others. They control your signal, GPS, WiFi, etc. The most used one that I've seen is 1.14.25.35
UC Capable is something you need when you start cooking. If you're new to the Raph, you probably don't need this info yet.
SPL is the most important. Since you bought your device pre-flashed with 6.5, is should be hardSPL. This helps prevent your device from becoming an expensive paperweight. Now, it helps, but doesn't guarantee. If you put your device into bootloader (hold vol-, hold power, and reset with stylus) your device at the top of your screen should say something like SPL-1.90.Olinex. This means it's hardSPL and you are able to flash custom ROMS, like the NRGZ28 ROM you linked to. As long as they are GSM you should be able to flash any ROM for the GSM Touch Pro.
These are the basics so just keep reading the wiki. I will answer any questions I can, so just shoot me a PM if needed
Hey, if you want to flash your Raphael, I'd recommend you read this
I did my first, regardint this thread, and actually worked, really simple if you ask me!
Some suggestions: Leave the radio, for first, just do a simple ROM flash, and after that if you find it nessescery you can do it later.
The only ROM I tried for my Raphael is TAEL's ROM, it's amazing compared to the stock ROMs!!! If you're intrested click on it in my signature!
I have the following ROM;-
r:- 1.11.25.01
g:-52.58.25.30u
d 5. phoenix
Do I have to revert to a OEM ROM? If so, where do I find those please?
Good news, I've been sucessfull Phoned imaged to TAEL Roms - very good.
Could of questions;-
1. Don't have the sat nav the other image had. Can't remember the name of it. but I used to use that quite alot. Does anyone know where I can download it from?
2. Used to have an application called FLASHLIGHT - great little app. Its a TOURCH application that used the FLASH Light. Really handy. Where can I download it please.
Many thanks.
Stevey G
1) are you talking about the garmin or tomtom gps software? or the one where you use the GPS to lock down a location (kinda like "dude where's my car?" app for the iphone)
search on the forums under software development subforum. it's called Torch.. that or NueLight.
Thanks I managed to find the torch light thing, but still can't find the sat nav. Not sure what the name was. It was really good though. Wasn't the tom tom navigator. Wish I made a note of it, as it was fully working version :-(
are you talking about the GPS navigation software? if so then it's either garmin (mobile XT) or tomtom
Hi,
Looking on my storage card Managed to find the name - AUTO MAPA. Tried to load it from the storage card, and it works. So I have copied the exe to the start menu, multimedia folder and it works great
Whats this GARMIN Mobile XT like then?
Since updating to TAEL Rom, my signal is very low and keeps disconnecting from the network.
Do I need to upgrade my RADIO then?
My version is;-
1.11.25.01
I found this one, would this work ?
http://www.4shared.com/file/133094257/1e1ce983/BlackStone_Radio_1172509.html
try testing other radio. I changed my radio to the new ATT official rom (not so new anymore but it was the latest updated ATT rom). Test it out for a few days each and map out what you think works best and keep to that.
One thing I noticed is that some radios will crash your phone after a call.. they may give you better signals, but it will crash your phone, so be aware of that.
Hi,
Thanks for the message. Does it matter that I am on TMOBILE and not ATT ?