Database Info

ROM 1.06.116WWE

this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip

Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers

has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu

A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116

actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)

...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz

Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !

taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz

Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!

Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.

We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...

it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André

sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?

Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((

BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).

landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!

Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks

macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe

I can't change my rom... help

I just recieved my qtek s100 and I'm so happy!!
The problem is that I bought it in france so it comes in french, so, even if it is no locked to a provider, I would love to have it in english.
I have tried to follow step by step the how to chang it, but the info I have is a bit bizarre!!
My DeviceData.txt is as follows>
U S B 6 4 1 . 0 3 . 0 2 F R E
1 . 0 3 . 1 0 2 F R E
1 . 0 1 . 0 0
So I don't know what to put in the batch file change.bat....
Can somebody help me?
I have tried also with Windows Mobile 2003 ROM editor but the password for the ext. rom is wrong... (following> http://www.spv-qtek.com/index.php?mod=tutorial&ac=InstllROM)
Please help a newbe!
Thanks!!

I suggest You take a close look at the forum. There is a file called "maupgradeut_noid.exe" available at the ftp-section. With this file, You should be able to upgrade your device, no matter what language or "provider" it had before.

Thanks!
I just downloaded this version:
ftp://xda:[email protected]/Uploads/Magician/MA_BP_WWE_11200_120_11200_Ship.zip
I run it and... It worked!!
Now I have WWE!!
Cheers!!
Now I'm dicovering my PPC... al my life with palm is a big change...

Sturgis,
I can't seem to download this file- is it still there?

sh500 you can find it on the original romsection @ magician
it's a zip file WWE_11200_120_11200_Ship.zip
i've downloaded it and my mda is flashing right now

sturgis said:
Thanks!
I just downloaded this version:
ftp://xda:[email protected]/Uploads/Magician/MA_BP_WWE_11200_120_11200_Ship.zip
I run it and... It worked!!
Now I have WWE!!
Cheers!!
Now I'm dicovering my PPC... al my life with palm is a big change...
Click to expand...
Click to collapse
What is inside this upgrade version ??

Thanks, I also downloaded it yesterday.
Does it have the BigStorage patch already applied? I remember reading somewhere that the 'storage' folder was no longer there (indicating that is has?).

Hi,
I see that somebody has remove it from there... I don't know why.
I have it at home though, so if someone want's it, I'll be happy to send it with yousendit.com
my email is sturgis at walla dot com
I don't know about details on bigstorage and so... I'm a newbe discobering his new toy...
What I know is that I followed all the steps in this forum and I could not change the OS, and that with this one is straigh forward...
By the way, what is this big storage thing?
Where could I find a list of "must have" software for a PPC?
(1-calc, battery pack, pocket informant ...)

Just flashed my JAM with 1.12 WWE ROM and it's not patched with Bigstorage. I think a patched one is available on the FTP...
As for a 'must have' software list check out the following thread...
http://forum.xda-developers.com/viewtopic.php?t=20119
Also what I found useful is to go on the Pocket Gear website and check out their bestsellers.

Thanks to everyone !
i received my Qtek S100 yesterday and was in german. As i wanted it in English, i used the link of sturgis (first poster) to update it to english. The update didnt go well and my ROM was smoked. Couldn't boot the Qtek S100 and the update crashed every time.
I finally found the shipped ROM WWE_11200_120_11200.zip diging in the site FTP. Update went great and my Qtek is now in english !
For those who are interested, the file is located there :
ftp://xda:[email protected]/Magician/Shipped_ROMS/
I found this forum/thread via google and you saved my day !
Thanks to you all

Unbranding

Hi
Problably lots of people already asked this. Believe it or not, I searched the forum and i didnt sow that many information about it. I have a mda compact customized with t-mobile software. Basacly I want to take the T-mobile Stuff out, it dosnt even let me set up a gprs account for another operator.
Any help would be thankfull
Ivo

your best bet would be to get the device unlokcke, ( see the unlock tool in the general section of the forun for the unkocl all in one tool) and then upgrade the rom with that of an imate's or qtek's
hope that helps
Jim

Hi
thanks for quick reply.
I unlocked it already. Its just the t-mob crap i want to get rid off. where about can i donload the roms ?
thanks

found the solution ...
just upgraded it with an original firmware and the no_id file
thanks for the help
Ivo

...and where can i find the original firmware and the no_id file? :?:
I would like to have my Orange m500 clean too! Only with the applications i'd like to use.
Can this only be done with installing those extendedRoms? Its very difficult for me to find a clear tutorial about this.
regards

The ext-rom brands your magician. When you want to get rid of it just
- make a backup of calendar, contacts, tasks etc.
- hard-reset
- folow initialize procedure on screen
- soft-reset as soon as you get the standard WM background & before the customizatiin (=branding) starts.
You need to do this last step after every hard-reset unless you go for BIG Storage & completely wipe-out the ext-rom & get a storage folder of 27Mb instead of 7Mb.
Instructions for BS are to be found on the forum. No need to search for a special rom, you can do it with your current rom.
Cheers, M

thnx @ oltp
I'll give it a try

ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR

When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent

Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M

Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears

I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M

Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards

The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???

Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M

Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update

I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M

Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english

Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M

thanx
Ok thanks a lot
regards

Need For Speed Undercover

Hi,
How to make the NFS:U that came bundled with my Blackstone work on Leo? I tried but and error prompt "Setup Error: Unable to install application. Please update your device ROM....etc etc...."
I'm currently on the latest ROM 1.66. It will wasted if I cant install this game to WM6.5 device.
Thanks in advance for any advice.

Boorick26 said:
Hi,
How to make the NFS:U that came bundled with my Blackstone work on Leo? I tried but and error prompt "Setup Error: Unable to install application. Please update your device ROM....etc etc...."
I'm currently on the latest ROM 1.66. It will wasted if I cant install this game to WM6.5 device.
Thanks in advance for any advice.
Click to expand...
Click to collapse
I've it on my leo, no problem installing it, so it's not waste time, unfortunatly I can't help you installing it couse as I said I've just run the cab without any issue

I have the same problem. But luckly, I found a green version and simply paste it in storage and run it from there. It support gsensor as well.

sso wanna share with us ??? can you ? where did you find it ?

sentiere said:
sso wanna share with us ??? can you ? where did you find it ?
Click to expand...
Click to collapse
They wont share it as technically that would be warez...
I would however have thought as you have purchased the game before, you would be able to go back to them and request the leo version?
I know most people have to edit the registry to stop a white out problem but it can be mended.