Related
I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G
noone seen this? can someone point me in the right direction?
anyone anyone, Bueller.....bueller.....
Did you setup your GPRS connections and all? These don't come setup with Underground and MBE. There is info in the various WM6 threads on setting this up (and even some cabs floating around for some of the providers). I have Cingular and I just went to their website and found info to do this.
GuardianZX9 said:
I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G
Click to expand...
Click to collapse
I have the same problem. There is a workaround though - if you tap and hold the 'To' field in the message, there is a 'Send' option. That one works for me.
Andrew
just flash Radio 2.19.11
i use T-mobile. i use regular T-Mobile GPRS for internet and i also made a new internet connection call T-Mobile MMS
setting similiar below
T-Mobile MMS Settings:
Setting up the data account
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile MMS.
Enter PictureMessaging in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Setting up the MMS profile
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter PictureMessaging in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile MMS from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to PictureMessaging and tap Set As Default.
Tap OK.
Click to expand...
Click to collapse
http://www.pocketpcaddict.com/forum...obile-mda-windows-mobile-5-phone-edition.html
and try switch around 216.155.165.050 to 216.155.165.50
Text messages
For SMS issues, try setting the Voice mail and Text message setting manually (Phone/Menu/Options/Services).Normally the network default settings work, but at times you may have to input the message center no. manually. Just call and ask your service provider for the message center number.
Radio ROM can be an issue at some locations- Try using 2.19.11 as suggested by J.
I have the same issue, I can send text fine, I can receive MMS, but I cant send MMS,
I have the settings just as posted above, and it doesn't work,
Hello.
I'm using faria's latest WM6 ROM, but can't find where to enter proxy server / proxy settings in accordance to t-mobile's guide. WM6 doesnt have the place where to enter proxy numbers as specified. After a little digging i heard you might need to change the settings in the registry for wm6.
Can anyone please advise?
Thanks!
12. Tap Edit my proxy server under T-Mobile GPRS.
13. Tap to check This network connects to the Internet.
14. Tap to check This network uses a proxy server to connect to the Internet.
15. Enter 216.155.165.050 in the Proxy server field.
16. Tap Advanced.
17. Tap HTTP.
18. Enter 8080 in the Port field.
Click to expand...
Click to collapse
I was able to configure mine just fine today, but I'll admit it took me a few tries in the past before I figured it out.
Go to Start --> Settings --> Connections tab --> Connections.
Since you're not using the standard T-Mobile ROM, just adapt the steps a bit to match up with what is on the WM6 ROM. Where it says T-Mobile GRPS in the instructions, actually use the My Work Network section on the device. You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Add a new VPN server connection
Edit my proxy server
Other than the My Work Network/T-Mobile GPRS thing, the steps were exactly the same.
Oh yeah, instead of 216.165.155.050 enter 216.165.155.50.
I did that and I was able to get an Edge connection and send/receive MMS messages from my Verizon phone.
Dave
sgtcasey said:
You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Click to expand...
Click to collapse
Hi.
When I goto Settings > Connection; "My Work" is no longer listed as a connection, only My Home.
How can i get back / add "My Work" ?
THanks.
Hmmm... I'm not sure. I have My ISP and My Work Network and I've always had that with the WM6 ROM's.
Dave
I know this is kind of buggy... I had the same issue.
If you add a new connection, call it My Work or something, and choose GPRS 3G for the type, and finish, it will put 2 connections, which will allow you to change between My Work Network again, etc. No registry hack needed, it's there, it's just not showing. By adding a 2nd connection, it will show your "My Work Network" again. Keep in mind, if you had MMS messaging, but no 'net until now, once the 'net works, you will have to change your MMS setting to "My Work Network" as well.
Now 'net and MMS works on my phone (Cingular 8525) on Tmobile, using only T-Zones and WM6 Thx for the help!
I just updated to WM6 and everything is working fine except i cant connect to T-Mobile GPRS anymore, it will start to connect and then disconnect right away. Also my MMS and SMS messages arent sending, how can i fix this?
You have to remove a '0' from the IP Address of one of the servers - for example the IP address should be 192.56.12.34, but the settings make it 192.056.12.34. It it this extra '0' that breaks it. I can't remember exactly where this is but, Settings, Connections, Connections and then somewhere in My ISP I think
I am sure someone on here will correct me shortly.......
If the seaching on this Forum didn't suck so much you wouldn't have needed to post
Andy
yea but where to i go to change all that, i dont know much about this so please someone help.
killerkhatiby009 said:
I just updated to WM6 and everything is working fine except i cant connect to T-Mobile GPRS anymore, it will start to connect and then disconnect right away. Also my MMS and SMS messages arent sending, how can i fix this?
Click to expand...
Click to collapse
Try This Had The Same Problem:
For GPRS:
Start-Settings-Connections tab-Connections
Click Add A New Modem Connection, Under Enter A Name For The Connection Put In T-Mobile GPRS. Then For Select A Modem Click Cellular Line (GPRS). Click Next Then For Access Point Name Put wap.voicestream.com, then next again and then finish. And Now It Should Work.
For MMS:
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter T-Mobile MMS in the Server Name field.
Enter 216.155.165.50 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile GPRS Or The Internet If T-Mobile GPRS Isnt For Selection from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to PictureMessaging and tap Set As Default.
Tap OK.
MUST HAVE GPRS SET-UP FIRST IN ORDER TO DO THE MMS CONFIGURATION!
so i have decided to update to WM6 and everything is working great. i got MMS to work and im pretty happy with it. The only thing is that now my T-Mobile (USA) MDA no longer has the Instant Messaging program and i can no longer send IM's. How can i fix this? i tried to download agile messenger but for that to work i have to be within wi fi range. While earlier before upgrading to WM6 i was able to do it from anywhere i had signal. Please help, i would really like to be able to instant message.
killerkhatiby009 said:
so i have decided to update to WM6 and everything is working great. i got MMS to work and im pretty happy with it. The only thing is that now my T-Mobile (USA) MDA no longer has the Instant Messaging program and i can no longer send IM's. How can i fix this? i tried to download agile messenger but for that to work i have to be within wi fi range. While earlier before upgrading to WM6 i was able to do it from anywhere i had signal. Please help, i would really like to be able to instant message.
Click to expand...
Click to collapse
Heres What Ur Looking For Hope It Helps!
LiQuiD FrEeZe said:
Heres What Ur Looking For Hope It Helps!
Click to expand...
Click to collapse
thanks, i have been looking for this app too...
killerkhatiby009 said:
so i have decided to update to WM6 and everything is working great. i got MMS to work and im pretty happy with it. The only thing is that now my T-Mobile (USA) MDA no longer has the Instant Messaging program and i can no longer send IM's. How can i fix this? i tried to download agile messenger but for that to work i have to be within wi fi range. While earlier before upgrading to WM6 i was able to do it from anywhere i had signal. Please help, i would really like to be able to instant message.
Click to expand...
Click to collapse
agile messenger works with gprs as well as wifi. btw there is also IM+ for all services(ICQ, MSN, AOL, Yahoo, Google)
Thanks a ton for the program, but when i try to sign on it doesn't connect its just stays at the signing on screen also i always get this weird text message when im trying to sign on. and after a while it just says communication error check your settings. does anyone know how to do this? does this program not work with WM6 cause even with wi fi it won't connect.
keep trying to connect..i used to get that error
so your saying to just keep on connecting? every time i start to connect it always gives me this text message
WVIIRLI ST=(200,"succesful")
SI=1.1Ax4d4dd54e576d84bc25a2049227dbca55
CI=WW: oz4121#[email protected]
KA=60000
Sorry for double post, but i fixed it by instalilng it to the main memory instead of storage card, like i had earlier.
killerkhatiby009 said:
so your saying to just keep on connecting? every time i start to connect it always gives me this text message
WVIIRLI ST=(200,"succesful")
SI=1.1Ax4d4dd54e576d84bc25a2049227dbca55
CI=WW: oz4121#[email protected]
KA=60000
Click to expand...
Click to collapse
do i need a data plan for oz messenger to work as well. Cause i have done all of this and i still get the error message. it also establishes an edge connection when i try to connect. what is it doing if it uses mainly txt messages; would be lame if it uses data and text messages, must be why tmobile uses it i.e. rack up your bill by using expensive but non bandwidth intensive features
big000000 said:
do i need a data plan for oz messenger to work as well. Cause i have done all of this and i still get the error message. it also establishes an edge connection when i try to connect. what is it doing if it uses mainly txt messages; would be lame if it uses data and text messages, must be why tmobile uses it i.e. rack up your bill by using expensive but non bandwidth intensive features
Click to expand...
Click to collapse
Hi big, You do not need a data plan, you just need to make sure that you have the Cellular (GPRS) modem set up in your Connections settings. If I am not mistaken, it will use txt msgs and there is a little lag time the IM's.
Hope this helps.
Mms Not Working
Killer, how did you get those MMS working?
Intergalactic said:
Killer, how did you get those MMS working?
Click to expand...
Click to collapse
Go to Messaging >> Menu (right soft key) >> Options
Tap MMS then click the Servers tab
Click the New button and enter the following info:
Server Name: PictureMessaging
Gateway: 216.155.165.50
Port Number: 8080 (I've heard you could also use 9201 but i use 8080)
Server address: http://216.155.174.84/servlets/mms
Connect via: My ISP
Size: 300k (you might set this smaller)
WAP Version: WAP 2.0
Tap: OK
Select the PictureMessaging entry and set is as default by tapping the Set As Default button
Tap: OK
The_Wizard said:
Go to Messaging >> Menu (right soft key) >> Options
Tap MMS then click the Servers tab
Click the New button and enter the following info:
Server Name: PictureMessaging
Gateway: 216.155.165.50
Port Number: 8080 (I've heard you could also use 9201 but i use 8080)
Server address: http://216.155.174.84/servlets/mms
Connect via: My ISP
Size: 300k (you might set this smaller)
WAP Version: WAP 2.0
Tap: OK
Select the PictureMessaging entry and set is as default by tapping the Set As Default button
Tap: OK
Click to expand...
Click to collapse
,,,,,,,,,,,,,,,,,,,,,,,,,,
Liquid Freeze: Thank You Very Much I've Been Looking For This Dam App For So Long Thank You.
First off let me say ive searched this site high and low and tried almost every .cab ive found and followed plenty of setup instructions but still for the life of me cannot get MMS to work. email i get no problems sending texts i get no problems. but no MMS , and i think ive tried everything on this site.... im running Farias WM6 rom , and love it.
I had MMS working on the phone before i had to reflash beacuse i updated a radio rom and it almost bricked it.... so i followed all the instructions again just like usual and reflashed the downgrade rom and then upgraded to farias. I just dont remember what it was i did to get MMS working before
If someone could help me out it would be much appreciated.....
Maybe we could start a sticky entitled " How to get your MMS back after flashing "
Thanks in advance guys.
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
kegobeer said:
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
Click to expand...
Click to collapse
Yea , no MMS at all......
cant recieve or send.....
I had it working on the Faria rom before i had to reflash.....
all i keep getting is " error syncronizing " everytime i try to hit " send/recieve"
I had the same issue, go under the MMS settings, then goto server, select Cingular MMS or whoever your carrier is, mine wascingular, and then set it to the default and delete the one named default
If there is not other one besides deafault, then you need to ask your provider for your settings and add it.
hope this helps
This might be helpful to others , but i tried it still no worky for me.
stolen from " Jon " on howard forums
Ah! This sorta illustrates the problem. I had mentioned that I couldn't seem to send MMS, although I *could* browse the web via GPRS.
Well...I spent some time on the phone with T-Mobile "PDA Support" and finally have this figured out! There's been talk here about using the two different APN's available to T-Mobile Internet customers for WAP and MMS versus regular website browsing.
When I spoke with T-Mobile PDA Support, I was told a few things:
1) they've had some network problems that aren't 100% resolved that could be messing up our ability to browse the net, consistently get EDGE speeds, or send MMS messages.
2) MMS is supposed to be sent over their WAP gateway, so for this, you should use "wap.voicestream.com" as your APN.
3) Web browsing for full HTML web pages is supposed to be done over their non-protocol-restricted internet gateway, so for this, you should specify "internet2.voicestream.com" as the APN.
I did some experimenting, and it seems that I cannot send MMS when I connect via "internet2.voicestream.com", and I cannot browse the web when I connect via "wap.voicestream.com". But, as the gentleman from T-Mobile PDA Support suggested, when I chose the APN appropriate to the task, I succeeded. I tried this several times with consistent results.
I think I saw some discussion here about manually selecting the GPRS connection each time so you get the right gateway. But with a bit of configuration work up front, you can make this work automatically. Here's how:
The essence of the solution is that you should have TWO different connection setting groups - one for Internet Browsing and email, and one for MMS. Then, you can have the first one automatically invoked when your application tries to connect to the Internet, and you can have the MMS application automatically select the second connection group when it's trying to send an MMS message.
So -- Most, if not all, of you have a connection group named "T-Mobile GPRS". To examine it, click on:
Start / Settings / Connections and then tap the Connections icon. With the Tasks tab selected, you should see two connection groups listed, along with three choices under each one for tasks you can perform.
Under the connection group named "T-Mobile GPRS", click "Manage existing connections" -- you should be on the "Modem" tab -- if not, select it now.
This page shows a table in which you can list various network connections that this connection group can use to send and receive data. Since it seems that the three APNs that we know about are special purpose (one for WAP/MMS, one for Internet, one for VPN), it does NOT make sense to mix them here and let WM5 try to figure out which is best to use -- you will wind up with inconsistent results (i.e., works sometimes, but not others, seemingly at random).
Instead, since this "T-Mobile GPRS" connection group is for Internet browsing, the one and only connection you want to specify here is one that will use the "internet2" APN.
But first, click on the "Proxy Settings" tab below, and just click the box labeled, "This network connects to the Internet", and make sure the other boxes on the pages are blank (no proxy server specified here!). When you're done, select the "Modem" tab again (you might have to minimize the keyboard display at the bottom to see the tabs).
If you don't have a data connection yet that uses the internet2 APN, you can click on "New", then give it a descriptive name (such as "Internet connection"), select "Cellular Line (GPRS)" as the modem, click "Next", and input "internet2.voicestream.com" as the APN, click "Next" again, leave the user name, password and domain all blank and click "finish".
Click "ok" at the top a couple of times and you should be done with the connection group that gets you to the Internet.
Now - we'll create a separate connection group for MMS:
Go back into "Start / Settings / Connections" and tap the "Connections" icon again. You're back at the "Connections" screen that lists your two most recently defined "connection groups" -- the top one should be "T-Mobile GPRS" since we just worked on it. Click on "Add a new modem connection". Even though this line appears under "T-Mobile GPRS", you'll actually be creating a new and separate connection group.
You'll see a screen entitled, "Make a New Connection". Give it a meaningful name -- I chose "WAP connection". Select "Cellular Line (GPRS)" as the modem, and click "Next". This time, under Access Point Name, specify "wap.voicestream.com". Click next and make sure on the "My Connection" screen that user, password and domain are blank, then click "Finish".
You will now have separate connection groups for Internet Access and for MMS tranmission.
The next step is what makes this work automatically. Close all the windows until you're at the "today" screen again. Click "Start" and then "Messaging". If you don't see "MMS" at the top left of the screen, click the "Menu" button at the lower right, click on "Switch Accounts" and select "MMS".
Click "Menu" again, and then click "MMS Configuration...". You'll see three tabs: "Preferences", "Servers" and "About".
The preferences tab has non-critical choices that you should set to meet your own needs.
On the Servers tab, you should see a single server listed, "T-Mobile MMS" -- this was installed by one of the T-Mobile customizations when you first booted up your MDA. Click on this , and you'll see a screen that details the configurat ion of this server. Here's what you want in the config:
Server Name: non-critical, T-Mobile named it, "T-Mobile MMS", so you should probably leave it at that.
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://215.155.174.84/servlets/mms
...and HERE is where we tell it to automatically switch to our network connection that was set up for MMS:
Where it says, "Connect via:", the default that T-Mobile put in was your old "T-Mobile GPRS" connection. Instead, I clicked the drop-down arrow and selected the new connection that we created way up above that references the "wap.voicestream.com" APN, called something like "MMS Connection".
Sending size limitation as locked at 292k. WAP Version defaults to 2.0, but you can drop it down to 1.2 if you have some reason to do this (I don't).
Once this is all set right, click "OK", and "ok" your way back out of the messaging application.
Now you're ready for a test:
There are many way to initiate an MMS. However you do it, when it starts up, you should see it connecting to GPRS via your "MMS Connection", it will then send your MMS and disconnect from GPRS again after a bit.
Open up PIE again and select a website, and this time you'll see GPRS connecting via your first connection group -- the one that uses "internet2.voicestream.com" as the APN.
You can go back and forth several times -- this setup will select the correct network connection group each time, and work.
The ONLY issue I've seen with this is the following:
If your GPRS connection for one type of activity is still connected when you try launching the other service, it doesn't seem smart enough to force the old connection to disconnect first. So...if your old connection hasn't time out yet, you may have to click on the "G" icon (top of your today screen) and select "disconnect" before starting your other activity. But that's it -- aside from this, all the APN switching is automatic -- and works perfectly.
Click to expand...
Click to collapse
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Data Cab
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
sYnOnYx said:
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Click to expand...
Click to collapse
sounds like what ever your server settings are, your gateway setting is wrong.
gdribot said:
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
Click to expand...
Click to collapse
Ive tried it 2x already and no worky.......
and now im back to " error syncronizing "
*siigh*
Now its connecting up again , and it connects to (edge) Tmo MMS
but it gets to 66% sent on the status and i get
" next hop connection failed "
Someone just texed me and said " nice pic " so i guess it worked ??
not holding my breath just yet, but praying !
*sigh* *arrrrrrrrrrrrrrrrrrrrrrrgggggg*
now its just connects and disconnects.........
Here are my settings tell me if something is wrong :
Under my MMS configuration ( found from the messaging menu )
Servers :
Sever name : T-mobile MMS
Gateway : 216.155.165.50
Port number : 8080
Sever Address : Http://215.155.174.84/servlets/mms
Connect VIA : T-mobile MMS
And
Settings > Connections > connections Icon
Tmobile MMS then under " manage existing connections "
Name : T-mobile MMS
Select a modem : Cellular line (GPRS)
Access Point name : wap.voicestream.com
Username : blank ( ive tried imputting tmobile in there and nothing still )
password: blank ( ive tried imputting tmobile in there and nothing still )
domain : blank
In the advanced tab under TCP/IP :" use server IP address is selected " and
nothing else is.
under servers on the advanced tab " use server-assigned addresses " is only selected.
any clues ?
back to the "Gateway+timeout" error.... sigh...
i dont know what the hell i did , but its sending messages now.........
still havent recieved one tho.
i think im gonna have to do a writeup tho.
Do you use wifi? When wifi is on my MMS doesn't work.
Did you ever figure out what was happening. I'm having a similar problem. As far as I can tell all the setting you listed above are correct, and I have mine set the same. When I try to send a message it hangs at 87% and never completes. Once it ran up to 99% then I got the "Gateway Timeout" error.
What version of the ARCSoft MMS client are you using?
I cannot get it to send or connect at all unless I use one of the CABs for the settings floating around - then it works, but that causes other NASTY side effects on WM6.
Just the one that came with the rom that I loaded, [02/Nov/2007] TNT.1933, ArcSoft 4.2.8.1 with plug-in and full features. The settings seem to connect, the message just won't complete sending.
I'm not able to get it to connect unless I use the T-Mobile CAB (manually configuring does NOT work) and that breaks data connections when on sync.