Hi All,
I have been searching and not able to find a solution that works with the problem i am having upgrading my rom.
I was trying to upgrade to either or L26_KaiserTouch_V1M2D.rar or L26KDV12_Full.rar
roms, and after unpacking, running the utilities i keep hitting the same wall.
I have two pcs i have tried on, a laptop and a desktop both running xp.
Uninstalled active sync reinstalled etc etc
even tried the hard spl after using MTTY to try and solve the problem.
I still get error 262, even with hard spl which runs a different rom update.
tried different usb ports, unplugged most devices to the basics, restarts etc make no change to it.
Then i tried a fat32 micro sd card with the rom named as KAISIMG.nbh
and after using MTTY as listed by Laurentius26, it will show loading but not just sits there for more than 10 mins!
Hopefully someone can come up with a solution or has had the same probs.
As you could probably imagine i have a moderate grasp of this kinda stuff but i think its now beggining to drive me crazy!
Cheers,
Nathan
Narf_911
narf said:
Hi All,
I have been searching and not able to find a solution that works with the problem i am having upgrading my rom.
I was trying to upgrade to either or L26_KaiserTouch_V1M2D.rar or L26KDV12_Full.rar
roms, and after unpacking, running the utilities i keep hitting the same wall.
I have two pcs i have tried on, a laptop and a desktop both running xp.
Uninstalled active sync reinstalled etc etc
even tried the hard spl after using MTTY to try and solve the problem.
I still get error 262, even with hard spl which runs a different rom update.
tried different usb ports, unplugged most devices to the basics, restarts etc make no change to it.
Then i tried a fat32 micro sd card with the rom named as KAISIMG.nbh
and after using MTTY as listed by Laurentius26, it will show loading but not just sits there for more than 10 mins!
Hopefully someone can come up with a solution or has had the same probs.
As you could probably imagine i have a moderate grasp of this kinda stuff but i think its now beggining to drive me crazy!
Cheers,
Nathan
Narf_911
Click to expand...
Click to collapse
you have already Hspl 3.29 from here:
http://forum.xda-developers.com/showthread.php?t=396922
also if you don't have WWE phone.. (English language)
you must unlock your phone with this steps:
http://forum.xda-developers.com/showthread.php?t=361236
and on activesync settings you must check usb connecting..
try the usb from your mouse to see if working...
good luck
also try AthineOS Manila Edition Rom hehehehe
http://forum.xda-developers.com/showthread.php?t=435345
Had a go at putting on Hardspl 3.56 also 3.29. even the forced Usb versions.
I can update to any standard Kaiser/Tytn2 Rom but any of these other cooked roms seem to give me grief.
I even thought perhaps i could run the other original rom update, so i did that and copied the different Nbh files in and renamed to what the original rom was but it still wouldn't allow me to get to where i wanted to get.
Is there any special way i can get Hardspl onto my device?
Can i copy it to the sd card and load it thru a bootloader?
This error 262 is driving me nuts!
I spent well over 4 hours of constant messing about and testing any possible solutions.
plus a further 2 today!
This is my last resort!
I'll be more than happy to donate to these rom developers once i get one working.
Even attempted the manilla AthineOS without luck.
I keep reading about the JumpSPL and SSPL, is anyone able to explain or link to where i can get it for the Kaiser ?
OR is it the same thru the whole series ?
Any assistance is greatly appreciated.
There is SOOO much to learn!
The more you know the more you realise you dont know!!
Use jump spl first, I reccomend 1.56, then install your spl of choice, I personally use 3.56
Place jump spl on your phone and run it from the phone, keeping your usb cord attached, you will get a tri colored screen. Now in active sync comm settings uncheck allow usb commections. unplug the usb cord wait 30 seconds and plug it back in. then from your pc open the folder hard spl and run kaiserRUU and after its done go back to active sync allow usb connections and flash your ass off.
Woo Hoo!!
Finally i got it working, I was beggining to think perhaps there was something stupidly wrong with my pc or the Tytn!
Thank you very much for your reply KD8DNS, Also thanks to b16b After so many hours of mucking round i've finally got it sorted!
Now running Kaiser Diamond V12, it works very well.
Will be looking to change to many other roms in the near future!
Cheers,
Nathan
"Narf!"
Related
Hi.
I have not posted much on this site, yet I have used it plenty of times. And first off I have to say "Thank you oh so very much" to everybody who frequent this site. Most of all I would like to thank the developers and rest of the crew that helps users on a daily basis.
I've had plenty of phones the last few years: 9090, 9100, Tytn and now Tytn II - all of which have been flashed - successfully I might add - with software and aid from you guys. (Ok, so my Tytn nearly ended up as a paperweight, but with some fancy maneuvers using the CE SDK from Microsoft I was able to use it as a PDA again)
Now, I am stuck. Really stuck. (Not saying I'm not to blame, but I am still stuck)
I've got a Tytn II (The P4550 HTC Kaiser 120 I believe). A few weeks back I flashed this with Alex's Home ROM (http://wiki.xda-developers.com/index.php?pagename=Alex's ROMs). At the time I was running Radio 1.27.12.11, and continued to use it after the Alex flash.
That worked perfectly.
But being interested in always trying new stuff I yesterday decided to flash Alex.v5.WM61.HTC.302.UltraClean.ROM.beta2. And it really went bad.
I studied up on many postings (obviously not enough) and started the process:
#1: Hooked up the pda to my computer
#2: HardSPL v1
#3: Tri-Color mode and activesync grey
#4: Started the upgrade with KaiserCustomRUU.exe
Everything went smoothly until it hit 99% - there it stuck and the program ended with a communication error. My computer runs Vista (yes, I know. I wont even consider flashing another phone using Vista), but it has worked flawlessly 25-30 times before.
Anyways, what happened when I tried to recover was that the phone went into tri-color mode. Needless to say it was unable to recover. After much back and forth I reinstalled an old laptop with XP (as mtty does not work on Vista) and was able to boot it back in to the OS using a walk trough from this site - cudos to Laurentius26 for the post)
Anyways - it came back. But since it failed the flash I tried it again to make sure it finished properly. What I did was flash back the Alex Home ROM I had in the first place - that worked. Then I flashed back the 1.27.12.11 Radio ROM - which failed - seriously.
It hung on 17% and when reset it would only boot to tri-color. And this is where I am now.
Every time the phone resets it boots to tri-color. I've done and redone the mtty (with and without the task 28), but it stops in tri-color mode. If I at that point hook it up to mtty and issue the boot command it will boot properly, but thats kinda annoying - having to carry with me a XP laptop for each time I have to reset the phone. (Ive also tried the set 14 0 when the phone is in this state, but it will still only boot to tri-color)
So - what now?
I've tried flashing the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship, but it stops with 294 - invalid vendor id. I've tried flashing the same ROM with HardSPL installed - no vender id error but it fails at 16%.
In desperation I've tried HTC_Kaiser_NL_ROM_1.56.404.6_Radio_22.45.88.07_1.27.12.17_Ship, but this also fails at 16%.
I've studied many a post on this site, but have so far been unable to recover from this error.
Is there any hope of regain the much needed functionality of normal booting?
Hopefully there is.
Thanks in advance.
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Most definetly.
These were also posted by e-men in another topic this morning so I am currently installing Windows XP on a computer at work to try this.
Will report back.
Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
ulfthomas said:
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Click to expand...
Click to collapse
WM6.0 and WM6.1 radio's are different, they are not compatible!
So be carefull which radio version you are flashing
Info about radio versions:
http://forum.xda-developers.com/showthread.php?t=349375
Cheers,
Laurentius26 said:
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
Click to expand...
Click to collapse
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
ulfthomas said:
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
Click to expand...
Click to collapse
Laurentius26 said:
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
Click to expand...
Click to collapse
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
ulfthomas said:
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Click to expand...
Click to collapse
Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
And all good tips Leo.
OS: Windows XP SP2. Freshly installed. Only Activesync 4.5 added.
HTC: Is orignial. Patched a few times using HardSPL
Original rom: As mentioned above I've tried a couple of them, but both ending in invalid vender id.
And no usb hub present.
Another comment - the flashing done today and yesterday has been done from two different xp computers - but with same result.
Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
I'm going to upload a shipped ROM for you, this one if you didn't try it yet?
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Another question... did you use Custom RUU with ROM update?
http://forum.xda-developers.com/showthread.php?t=334890
ulfthomas said:
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
Click to expand...
Click to collapse
Yup - that one has been tested - fails with invalid vender id.
Also tried flashing that rom with HardSPL - comm. error.
And no, I have not tried the Custom RUU. Will for sure try that now.
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Yes... try with another shipped ROM please?
ulfthomas said:
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Click to expand...
Click to collapse
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Use one more time MTTY, clear all FATS and I've send you a PM.
ulfthomas said:
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Click to expand...
Click to collapse
If you're getting an invalid vendor id it sounds like your hardspl or superCID isn't working correctly. Before going any further it's probably best to go to your bootloader screen and check that hardspl is still installed.
After that, I'd try flashing from the SD card.
Good point ach2, but when launching HardSPL and starting the update it lists the correct data on the bootscreen (Jumpspl or something equivavlent to that)
Leo: Looking around xda I found an article about dumping the ROM from another device. In the same thread I found a link to dumped original ROM. I patched that and it worked like a charm.
My PDA came back to its original state.
After arriving home just now I thought I would give your ROM another go, but same result - stuck at 16% (With HardSPL and Custom RUU)
What can cause this?
Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....
Ok so I have a HTC Touch Pro and eveytime i try to Flash my rom using the HARDSPL, I get a communication error that says, The Update utility cannot connect to your phone. The phone is active sync'd and connected. So I can't figure out what is going on. I hard reset thinking that would help but it didn't. Some one please help me, I just want my phone to run correctly with a new rom and this is driving me absolutely insane.
does it happen when you try to hard spl? or when you try flashing a rom after a hard spl
sycorange said:
Ok so I have a HTC Touch Pro and eveytime i try to Flash my rom using the HARDSPL, I get a communication error that says, The Update utility cannot connect to your phone. The phone is active sync'd and connected. So I can't figure out what is going on. I hard reset thinking that would help but it didn't. Some one please help me, I just want my phone to run correctly with a new rom and this is driving me absolutely insane.
Click to expand...
Click to collapse
Hi,
Seems you run in the Firewall-error... disable (or shutdown your firewall) and try again.
Dirk
Yeah its in HARDSPL but it wouldn't even let me do a stock rom (for ****s and giggles i tried this)...never thought about the firewall ill be home in an hour and will try it out...let you know how it goes thanks for the response
I was wishing that it was that... I disabled my antivirus and my windows firewall was already off...any more ideas? Just to give you guys some facts
1. Touch Pro
2. Trying to use HardSPL to unlock my phone
3. When i try to run it recognizes what rom version I have and tells me what im updating to.
4.I hit next and it goes to the progress bar on the screen.
5. Nothing happens on my phone
6. Then hardspl errors out
???
can anyone help?
sycorange said:
I was wishing that it was that... I disabled my antivirus and my windows firewall was already off...any more ideas? Just to give you guys some facts
1. Touch Pro
2. Trying to use HardSPL to unlock my phone
3. When i try to run it recognizes what rom version I have and tells me what im updating to.
4.I hit next and it goes to the progress bar on the screen.
5. Nothing happens on my phone
6. Then hardspl errors out
???
Click to expand...
Click to collapse
Hi again
I'm not that familiar with HardSPL, but .. do you need to run it every time you flash , or is it only the first time needed ?
And another tought ran through my mind : are you connecting your device directly to your PC, or via a USB-hub ? Hubs tend to be a problem in such ocassions ...
Dirk
thanks again for an answer dirk...You need hardspl the first time only, from there on you can just flash roms...I am also not using a hub...
Two quick notes... 1. I tried to use the cord that came with it to power an external hard drive and it didnt work...then i switched it to my 6700 mini usb and the hard drive did work. So I'll try that cord with my phone.
2. im going to try to do it on one of my clients computers also tonight.
I post back with results....
Thanks again
Kind of sounds like you don't have Hardspl on it. What does it say when you go into bootloader? GSM or CDMA Touch Pro ?
Ok it comes up with tri color bars for a half second then says...
Loading...
No image file!
Than it goes back to the tri color screen and reads as follows...
Security Unlocked
Raph800
SPL-0.37.0000
MicroP-Hermann (LED) V0C85
MicroP-Hermann (KEY) V0685
PSOC-Raph STAGE_EVT v20
Hope this helps!
Also its a CDMA... Sprint Touch Pro
Anyone have something similar happen to them while flashing?
After doing a bunch of reading I understand that the HardSPL didn't work...but im not sure what im doing wrong. I think im messing up the steps somehow?
sycorange said:
After doing a bunch of reading I understand that the HardSPL didn't work...but im not sure what im doing wrong. I think im messing up the steps somehow?
Click to expand...
Click to collapse
Hi again
I don't think you're messing up steps... it looks more like messing up systems. Are you sure the ROM you want to install suits your CDMA-phone ? There are some basic differences between GSM and CDMA...
Dirk
1st off..
I'm using the 3/3/09 RevRom with Radio 1.65.28.25 and Hard SPL 1.0 on an ATT Tilt. I was getting horrible call quality so I'm trying to switch to a new radio.
Well I tried using the Kaiser Custom RUU to flash a new radio but I can't get an Activesync connection and my computer(Windows running Vista 32). So I tried toggling the activesync USB settings and the advanced network functionality settings. Didn't work. But even though the computer won't recognize my phone it will still charge it via the USB connection. My computer will even make a little ding sound that lets me know the phone is connected but it will say "USB Device Not Recognized". So flashing the new radio and Hard SPL 3.29 didn't work via USB. I've been through 20 plus threads on XDA trying various things for the past 3 hours and nothing has worked. Still no USB connection.
Alright, so then I figured I'd just flash a new radio via MicroSD. I read the Wiki, then reformatted my storage card to FAT 32. I download the .nbh files through Opera on my phone, then I saved them to my storage card. I tried flashing radio 3.29 via SD and after the Bootloader screen popped up it said "Image File Not Read". This after following all the steps in the wiki.
So then I tried flashing Hard SPL 3.29 via SD. I copied the files to my storage card and deleted the other ones. Brought up the bootloader screen and it still says "Image file not read"
So can anybody help me fix either problem? If I can figure out a way to fix my USB connection then I don't care about having to flash via SD. And if I can figure a way to flash via SD then I don't have to worry about the USB connection.
Sorry for the long post. And sorry to sound all noobish, but I really need some help. Thanks in advance.
klrob33 said:
1st off..
I'm using the 3/3/09 RevRom with Radio 1.65.28.25 and Hard SPL 1.0 on an ATT Tilt. I was getting horrible call quality so I'm trying to switch to a new radio.
Well I tried using the Kaiser Custom RUU to flash a new radio but I can't get an Activesync connection and my computer(Windows running Vista 32). So I tried toggling the activesync USB settings and the advanced network functionality settings. Didn't work. But even though the computer won't recognize my phone it will still charge it via the USB connection. My computer will even make a little ding sound that lets me know the phone is connected but it will say "USB Device Not Recognized". So flashing the new radio and Hard SPL 3.29 didn't work via USB. I've been through 20 plus threads on XDA trying various things for the past 3 hours and nothing has worked. Still no USB connection.
Alright, so then I figured I'd just flash a new radio via MicroSD. I read the Wiki, then reformatted my storage card to FAT 32. I download the .nbh files through Opera on my phone, then I saved them to my storage card. I tried flashing radio 3.29 via SD and after the Bootloader screen popped up it said "Image File Not Read". This after following all the steps in the wiki.
So then I tried flashing Hard SPL 3.29 via SD. I copied the files to my storage card and deleted the other ones. Brought up the bootloader screen and it still says "Image file not read"
So can anybody help me fix either problem? If I can figure out a way to fix my USB connection then I don't care about having to flash via SD. And if I can figure a way to flash via SD then I don't have to worry about the USB connection.
Sorry for the long post. And sorry to sound all noobish, but I really need some help. Thanks in advance.
Click to expand...
Click to collapse
why didn't you just ask here http://forum.xda-developers.com/showthread.php?t=499499 in the thread you started instead of starting ANOTHER new thread?
edit: we have way to many people starting new threads just because they are having troubles
Wow. That really helps me a lot. Thank you.
I just changed that thread to Delete. There's no need to get all snarky and pompous about it. If you don't want to help that's fine. But your condescending attitude isn't helping anything.
I should've known there was going to be somebody to come and give me some snide comment about starting a new thread. It's just the internet and it's just a message board. It's not that serious. Calm down.
klrob33 said:
Wow. That really helps me a lot. Thank you.
I just changed that thread to Delete. There's no need to get all snarky and pompous about it. If you don't want to help that's fine. But your condescending attitude isn't helping anything.
I should've known there was going to be somebody to come and give me some snide comment about starting a new thread. It's just the internet and it's just a message board. It's not that serious. Calm down.
Click to expand...
Click to collapse
i just helped you by letting you know people are not supposed to be starting new threads every time they have a question, and the help i gave you was cloudy by your attitude
msd24200 said:
i just helped you by letting you know people are not supposed to be starting new threads every time they have a question, and the help i gave you was cloudy by your attitude
Click to expand...
Click to collapse
That's right!! You tell him msd! KICK HIS A** SEABASS!!!!! j/k
klrob33 said:
Wow. That really helps me a lot. Thank you.
I just changed that thread to Delete. There's no need to get all snarky and pompous about it. If you don't want to help that's fine. But your condescending attitude isn't helping anything.
I should've known there was going to be somebody to come and give me some snide comment about starting a new thread. It's just the internet and it's just a message board. It's not that serious. Calm down.
Click to expand...
Click to collapse
YOU screwed up your phone, you're the one in DIRE need of help.
msd is a helpful and respected member of this forum , who was merely trying to guide into the best postion to get help fixing the phone YOU hosed.
But with that attitude .....have fun fixing your own phone.
When people ask for help and then decide to throw a wobbly, nothing more can be done but to leave them to there own game, this is no exception to that rule.......
Sit's and watches the popcorn fly
My Two Cents
Whew! I dunno about all the bickering about posts and such but 3've found that the file name on the root of the storage card is very important. Did you name the KAISIMG.nbh? I have received that message when I've tried to change the filename with File Explorer. FIle explorer dometimes hides the extension so if you rename ur ruu_image file as KAISIMG.nbh yu might really have named it KAISIMG.nbh.nbh. It won't recognize it and say image not found. Hope that helps!
PS When asking for help you might want to try some humility. May be just a forum to you but people take this seriously and help for free most times. Respect that.
klrob33 said:
1st off..
I'm using the 3/3/09 RevRom with Radio 1.65.28.25 and Hard SPL 1.0 on an ATT Tilt. I was getting horrible call quality so I'm trying to switch to a new radio.
Well I tried using the Kaiser Custom RUU to flash a new radio but I can't get an Activesync connection and my computer(Windows running Vista 32). So I tried toggling the activesync USB settings and the advanced network functionality settings. Didn't work. But even though the computer won't recognize my phone it will still charge it via the USB connection. My computer will even make a little ding sound that lets me know the phone is connected but it will say "USB Device Not Recognized". So flashing the new radio and Hard SPL 3.29 didn't work via USB. I've been through 20 plus threads on XDA trying various things for the past 3 hours and nothing has worked. Still no USB connection.
Alright, so then I figured I'd just flash a new radio via MicroSD. I read the Wiki, then reformatted my storage card to FAT 32. I download the .nbh files through Opera on my phone, then I saved them to my storage card. I tried flashing radio 3.29 via SD and after the Bootloader screen popped up it said "Image File Not Read". This after following all the steps in the wiki.
So then I tried flashing Hard SPL 3.29 via SD. I copied the files to my storage card and deleted the other ones. Brought up the bootloader screen and it still says "Image file not read"
So can anybody help me fix either problem? If I can figure out a way to fix my USB connection then I don't care about having to flash via SD. And if I can figure a way to flash via SD then I don't have to worry about the USB connection.
Sorry for the long post. And sorry to sound all noobish, but I really need some help. Thanks in advance.
Click to expand...
Click to collapse
Hey GUys,
I'm not new to flashing and roms and all that jazz. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed rine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
Is there anything else I can do to flash a n
Have you tried to flash the SPL from the SD card? Worth a shot if not.
thanks for getting back, i have tried..multiple. It will just sit on loading as for everything except that damn att rom. i've been going at this for hours and hours. just to make sure, the spl flash will still be named KAISIMG.nbh correct? or has my frustration gotten to me
Yes but make sure you dont put the .nbh. Just kaisimg or it will be kaisimg.nbh.nbh and wont work
haha, yeap. i'm an i.t guy so i have file extensions showing by default so thats golden
I have the stock att rom up and running so the phone is functional, but that said, its the ****y att rom and I'd really like to change that asap., I'm just tired and fed up at this point really
Also for flashing SPL from SD card you need kaisdiag.nbh. Place it on the SD too. I should have told you that first. Its in my 4shared if you dont have it.
just tried it. it is stuck on the loading screen....
Try reading from here: http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave