i have unlock code, but can`t enter it. "you have tried 9 times, wait untill timout" - this is on phones display. how long i must wait. is there any other method enter code?
Related
Hi,
i have Wizard with a forgotten unlock password. Active sync tells me, that Iishould unlock the device to be able to connect. I've tried to hardreset with no luck. When it asks me, if i would return to factory presets and i release the two button, it boots again. I have no chance to press the send button.
Now i'm looking for a tool to flash from the three color bootloader.
Any suggestions?
Thanks,
iontichy
Last year I unlocked Nexus when it was 2.3.4，and then i install CM 7.1，and last month I installed CM 9.0.
Last week I loked my phone using fastboot oem lock,and then the phone was locked ,you can see in the recovery.And then I tried to unblock again,but when i type fastboot oem unlock on my computer,and my phone i can shoose "unlock" bye the volume button,and select by the power button,and then nothing happen on my phonescreen or on my computer does screen.
What can i do now?Thanks to everyone!!
To everyone trying to unlock their Samsung Galaxy S4 MK2 locked to AT&T and had no luck after doing method 1 and 2 in this thread: http://forum.xda-developers.com/showthread.php?t=2595457. I found another method. It took me 3 weeks to make this happen. No root access required.
WARNING: Do this at your own risk! If your phone get bricked, you did something wrong but I have a link below to unbrick you phone.
Requirements:
1. Make sure that your phone is MK2 build and that the phone prompts for the SIM network unlock code when another carrier SIM is placed.
2. Buy a cheap IMEI unlock code somewhere, they should provide you the freeze code as well. I know! I also hope we can do this for free.
3. We will be using a method combination using method 2 from this link http://forum.xda-developers.com/showthread.php?t=2595457 and my troubleshooting procedures.
Steps:
After buying the code. The cheapest one about $3.00 to $5.00. Google it. Follow the steps they provided. They will just tell you to insert other carrier SIM and when the SIM network unlock prompt pops out, type the unlock code and hit "unlock". If it doesn't work follow this steps:
Troubleshooting number 1:
1. Power on your phone with a different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.
2. Type your Unfreeze code and hit Unlock button. You will get "unsuccessful message" again but don't worry.
3. Now type the Unlock code and hit Unlock button. *If your phone reads "Network Lock Succesful" it worked, but if not, proceed to step 4.
4. If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad. (This will reformat all your data)
5. After phone restarts, type the Unfreeze code when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" and hit unlock button. It will say "unsuccessful" again, don't worry!
6. Type the Unlock code and hit Unlock button. Your phone should now give you the message "Network Lock Successful".
Now. If this worked for you, you are lucky. Apparently, this did not work for me. When I typed in *2767*3855# the phone did not do anything. I tried factory resetting too by using the E3 boot command and proceeded to step 5 but it still not working. Lets proceed to troubleshooting number 2.
Troubleshooting number 2:
Note: Troubleshooting number 2 needs access to the hidden menu. Since we are running on MK2 hidden menu is disabled. Again, another disappointment. But then again, we can access the hidden menu by flashing MDL modem. So we now go to this link: http://forum.xda-developers.com/showthread.php?t=2595457 and follow method 2. Download both the modems and you need odin 3.07. Now after flashing the MLD modem you can now access the hidden menu and follow the steps below.
1. Make sure that the phone PROMPTS for the code with a NON accepted sim card.
a. Go to the Dial pad and dial *#197328640# or *#0011#
b. Press the Menu button followed by the Back key. Then, hit the Menu button again and select KEY INPUT. Enter 1 and press the OK button to enter ServiceMode.
c. Press Menu one more time and tap back again. This will pull up the Main Menu for ServiceMode. Tap [1] UMTS.
d. Now select [1]DEBUG SCREEN, followed by [6] PHONE CONTROL.
e. From the next screen, pick [6] NETWORK LOCK.
f. You will see 3 options
g. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
h. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
i. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message
j. Restart the phone on the screen by holding the power button and click RESTART (Note: Do not do the NV rebuild, just restart using the power button)
k. When the phone prompts for the unlock code simply enter the unlock code provided to you
l. Your phone is now permanently unlocked!
m. Odin flash the MK2 modem or else you phone will be buggy and wont have sounds.
This is my method of unlocking my S4 MK2 build locked to AT&T. Is it really permanent? I tried to re flash a full MK2 modem from this link: http://forum.xda-developers.com/showthread.php?t=2621279. After it booted, it never asked for the SIM unlock PIN. I also tried factory reset by using the E3 boot command by holding the volume up+homekey+power button at the same time. After booting up, no prompt for the SIM network unlock PIN.
If ever you hard brick you phone, it is not my fault. I actually did a hard brick when I was doing method 1 from the above link but I managed to fix it by using this link: http://forum.xda-developers.com/showthread.php?t=2573080.
I hope this works for you as well.
Credit goes to: bvzxa3 and ted77usa. Without their guide I won’t figure this out. Thank you for making my brain bleed a bit. Now I feel like I’m a genius.
Unlock for $5 or $3
Can you pls give link where you find unlock this cheap, I was only able to find it for $30 or higher. Thanks
cprebel said:
To everyone trying to unlock their Samsung Galaxy S4 MK2 locked to AT&T and had no luck after doing method 1 and 2 in this thread: http://forum.xda-developers.com/showthread.php?t=2595457. I found another method. It took me 3 weeks to make this happen. No root access required.
WARNING: Do this at your own risk! If your phone get bricked, you did something wrong but I have a link below to unbrick you phone.
Requirements:
1. Make sure that your phone is MK2 build and that the phone prompts for the SIM network unlock code when another carrier SIM is placed.
2. Buy a cheap IMEI unlock code somewhere, they should provide you the freeze code as well. I know! I also hope we can do this for free.
3. We will be using a method combination using method 2 from this link http://forum.xda-developers.com/showthread.php?t=2595457 and my troubleshooting procedures.
Steps:
After buying the code. The cheapest one about $3.00 to $5.00. Google it. Follow the steps they provided. They will just tell you to insert other carrier SIM and when the SIM network unlock prompt pops out, type the unlock code and hit "unlock". If it doesn't work follow this steps:
Troubleshooting number 1:
1. Power on your phone with a different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.
2. Type your Unfreeze code and hit Unlock button. You will get "unsuccessful message" again but don't worry.
3. Now type the Unlock code and hit Unlock button. *If your phone reads "Network Lock Succesful" it worked, but if not, proceed to step 4.
4. If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad. (This will reformat all your data)
5. After phone restarts, type the Unfreeze code when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" and hit unlock button. It will say "unsuccessful" again, don't worry!
6. Type the Unlock code and hit Unlock button. Your phone should now give you the message "Network Lock Successful".
Now. If this worked for you, you are lucky. Apparently, this did not work for me. When I typed in *2767*3855# the phone did not do anything. I tried factory resetting too by using the E3 boot command and proceeded to step 5 but it still not working. Lets proceed to troubleshooting number 2.
Troubleshooting number 2:
Note: Troubleshooting number 2 needs access to the hidden menu. Since we are running on MK2 hidden menu is disabled. Again, another disappointment. But then again, we can access the hidden menu by flashing MDL modem. So we now go to this link: http://forum.xda-developers.com/showthread.php?t=2595457 and follow method 2. Download both the modems and you need odin 3.07. Now after flashing the MLD modem you can now access the hidden menu and follow the steps below.
1. Make sure that the phone PROMPTS for the code with a NON accepted sim card.
a. Go to the Dial pad and dial *#197328640# or *#0011#
b. Press the Menu button followed by the Back key. Then, hit the Menu button again and select KEY INPUT. Enter 1 and press the OK button to enter ServiceMode.
c. Press Menu one more time and tap back again. This will pull up the Main Menu for ServiceMode. Tap [1] UMTS.
d. Now select [1]DEBUG SCREEN, followed by [6] PHONE CONTROL.
e. From the next screen, pick [6] NETWORK LOCK.
f. You will see 3 options
g. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
h. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
i. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message
j. Restart the phone on the screen by holding the power button and click RESTART (Note: Do not do the NV rebuild, just restart using the power button)
k. When the phone prompts for the unlock code simply enter the unlock code provided to you
l. Your phone is now permanently unlocked!
m. Odin flash the MK2 modem or else you phone will be buggy and wont have sounds.
This is my method of unlocking my S4 MK2 build locked to AT&T. Is it really permanent? I tried to re flash a full MK2 modem from this link: http://forum.xda-developers.com/showthread.php?t=2621279. After it booted, it never asked for the SIM unlock PIN. I also tried factory reset by using the E3 boot command by holding the volume up+homekey+power button at the same time. After booting up, no prompt for the SIM network unlock PIN.
If ever you hard brick you phone, it is not my fault. I actually did a hard brick when I was doing method 1 from the above link but I managed to fix it by using this link: http://forum.xda-developers.com/showthread.php?t=2573080.
I hope this works for you as well.
Credit goes to: bvzxa3 and ted77usa. Without their guide I won’t figure this out. Thank you for making my brain bleed a bit. Now I feel like I’m a genius.
Click to expand...
Click to collapse
HEY GUYZ....
I KNOW MANY OF US FACE PROBLEM WITH OUR PHONE DUE TO LOCKED CARRIERS.......
SO HERE I AM WITH A SOLUTION TO HELP YOU OUT....
MY PHONE IS NOT LOCKED SO I HAVEN'T TRIED IT...SO PLEASE TRY AND REPORT.....
TUTORIAL----
For most Sony phones, You must power the phone on with unaccepted SIM card, wait for a few seconds until the phone screen asks for a network unlock pin code. When you see the message, enter the code obtained from Us.
In other cases, mostly in new models can be used #987654321#.
How You can check codes counter:
1. Turn on the phone whithout sim card
2. Lock screen
3. Press sequence: Menu, Back, Back, Menu, Back, Menu, Menu, Back
4. Select Service info
5. Select SimLock
6. Check where is X
7. If X is on NETWORK and value is different than zero, you can unlock your phone.
8. If it is zero unlock by code is NOT available. The counter is blocked.
1. Turn on the phone whithout sim card
2. Type *#*#7378423#*#*
3. Select Service info
4. Select SimLock
5. Check where is X
6. If X is on NETWORK and value is different than 0, you can unlock your phone.
7. If it is 0 unlock by code is NOT possible.
The counter is blocked.
In new models can be used #987654321#.
Anyone tried this ?
abhishekr700 said:
HEY GUYZ....
I KNOW MANY OF US FACE PROBLEM WITH OUR PHONE DUE TO LOCKED CARRIERS.......
SO HERE I AM WITH A SOLUTION TO HELP YOU OUT....
MY PHONE IS NOT LOCKED SO I HAVEN'T TRIED IT...SO PLEASE TRY AND REPORT.....
TUTORIAL----
For most Sony phones, You must power the phone on with unaccepted SIM card, wait for a few seconds until the phone screen asks for a network unlock pin code. When you see the message, enter the code obtained from Us.
In other cases, mostly in new models can be used #987654321#.
How You can check codes counter:
1. Turn on the phone whithout sim card
2. Lock screen
3. Press sequence: Menu, Back, Back, Menu, Back, Menu, Menu, Back
4. Select Service info
5. Select SimLock
6. Check where is X
7. If X is on NETWORK and value is different than zero, you can unlock your phone.
8. If it is zero unlock by code is NOT available. The counter is blocked.
1. Turn on the phone whithout sim card
2. Type *#*#7378423#*#*
3. Select Service info
4. Select SimLock
5. Check where is X
6. If X is on NETWORK and value is different than 0, you can unlock your phone.
7. If it is 0 unlock by code is NOT possible.
The counter is blocked.
In new models can be used #987654321#.
Click to expand...
Click to collapse
it worked on my friends phone ...yeah
where can i get the code
abhishekr700 said:
HEY GUYZ....
I KNOW MANY OF US FACE PROBLEM WITH OUR PHONE DUE TO LOCKED CARRIERS.......
SO HERE I AM WITH A SOLUTION TO HELP YOU OUT....
MY PHONE IS NOT LOCKED SO I HAVEN'T TRIED IT...SO PLEASE TRY AND REPORT.....
TUTORIAL----
For most Sony phones, You must power the phone on with unaccepted SIM card, wait for a few seconds until the phone screen asks for a network unlock pin code. When you see the message, enter the code obtained from Us.
In other cases, mostly in new models can be used #987654321#.
How You can check codes counter:
1. Turn on the phone whithout sim card
2. Lock screen
3. Press sequence: Menu, Back, Back, Menu, Back, Menu, Menu, Back
4. Select Service info
5. Select SimLock
6. Check where is X
7. If X is on NETWORK and value is different than zero, you can unlock your phone.
8. If it is zero unlock by code is NOT available. The counter is blocked.
1. Turn on the phone whithout sim card
2. Type *#*#7378423#*#*
3. Select Service info
4. Select SimLock
5. Check where is X
6. If X is on NETWORK and value is different than 0, you can unlock your phone.
7. If it is 0 unlock by code is NOT possible.
The counter is blocked.
In new models can be used #987654321#.
Click to expand...
Click to collapse
What can I do if on sony c3 counter attempts is 0?
How i can unlock this?
Need help..how can I fix this problem,when I see on setting,the OEM Unlock setting just blank..I already Unlock Bootloader but FRS LOCK..
elol said:
Need help..how can I fix this problem,when I see on setting,the OEM Unlock setting just blank..I already Unlock Bootloader but FRS LOCK..
Click to expand...
Click to collapse
You can try Factory reset, followed by Install latest firmware and recovery, all from eRecovery (switch off, connect to charger, boot with keeping Vol+ pressed in).
If it locks Bootloader, it would also reset FRP, making the OEM Unlocking option available again in Developer settings.
Seen the same time ago on another Huawei model with Nougat...