Hi,
i have Wizard with a forgotten unlock password. Active sync tells me, that Iishould unlock the device to be able to connect. I've tried to hardreset with no luck. When it asks me, if i would return to factory presets and i release the two button, it boots again. I have no chance to press the send button.
Now i'm looking for a tool to flash from the three color bootloader.
Any suggestions?
Thanks,
iontichy
Related
My 8125 is stuck on "Press Send to rstore factory default, other key to exit"
It was locked this morning, when I tried to unlock it, I got this message. Tried soft reset, removed battery and pressed camera button while powering on, nothing!!
Any suggestions?
Thanks!
try a hard rest. you'll lose anything you added since you've had it, but better than a brick . . .
Tried all the hard resets I could find, it always just comes back to the "press send to restore" screen.
What unlocking tool you used?
dfairles said:
My 8125 is stuck on "Press Send to rstore factory default, other key to exit"
It was locked this morning, when I tried to unlock it, I got this message. Tried soft reset, removed battery and pressed camera button while powering on, nothing!!
Any suggestions?
Thanks!
Click to expand...
Click to collapse
What unlocking tool you tried to use? Is it a G3 or G4? (What are IPL / SPL on your phone?
that would be the message you get when you do a hard reset. have you pressed send? Did you reflash your phone sometime before that?
My phone is a G3, I unlocked it almost a year ago.
The IPL,SPL is 3.x and I have flashed this phone many times.
The strang thing is that is was locked this morning, and when I picked it up, I must have pressed some odd key combo to get it in this state and it acts like it is still locked.
Pressing send does nothing.
I have taken the battery out and pressed the cammera button during power on, used the comm and voice button while resetting, and it just pops right back to this screen. I can't seem to get it into boot loader mode or anythink.
Thank you all for you imput and help.
Anyone have and Ideas?
can you reboot and get it into the bootloader screen? if so, I'd try a reflash and see if that works
Hello
I had HTC Diamond before and now i bought HTC Touch Pro.
It has original O2 rom and I am trying to flash a new one. But I cannot enter bootloader. I did Hard-SPL but since i cannot enter bootloader I cannot check if it was succesful or not. I tried all the button combinations (like vol down + enter + reset etc...) but it was unsuccesfull. And i even tried to copy EnterBootloader.exe to the phone and run it. But the screen just goes black and thats all. And when I was trying to do HARD-SPL the screen also went only black. I never seen the three color screen. Please help me!
Thanks
Moved as not ROM Development.
Well, you're probably doing it wrong. Hold volume down, then soft reset. Keep holding vol down until the tricolor screen appears. Don't hold the reset button down; just push it and release it.
Im doing it right. Im sure
so u re trying to flash via card or not, if you're trying to flash via PC dont forget to connect with active sync before, if you are trying to connect with SD card dont forget to do a clean format of it before
I remembered that I actually had the issue once (no idea why, it only happened on one rom about a year ago). Try doing a hard reset, then go into bootloader (instead of pushing vol up and re-booting). If that doesn't work, then start the boot process, and when it hits the alignment screen, try to go into bootloader.
Greetings all, As the title suggest I have an HTC One A9 unlocked and I am trying to factory reset it after re-locking bootloader. However, Whenever I boot into boot mode and select to reboot into Recovery mode I am greeted with "Failed to boot to recovery mode" With suggestions to press volume up or down to go back into bootmode. Upon resetting my phone I am sent to a data encryption screen where it ask to enter a password to decrypt my data, Now I can enter any number I want and it goes through saying "The password you entered is correct but your data is corrupt." And gives me a button to factory reset my phone, So I press it and it resets my phone and enters bootmode where my only options are; Reboot, Reboot to bootloader, Boot to download mode, reboot to recovery (Which I just covered does not work for me), Power down. I've looked into this problem before coming here and other people with similar problems have no problems entering recovery mode and even have an option to factory reset the phone from the boot loader menu, However I do not have that 'Factory reset' option in my boot loader menu.
I've spent the last two hours looking at various websites and various topics in this forum but cannot find a solution to aid me. I was hoping to be able to just fix this and return to my phones current settings without wiping anything, But at this point I'll be happy to be able to just get past this and will be satisfied with factory wiping the phone and having it be useable, As I'd like to avoid having to buy a new phone it at all possible.
When I go to recovery mode, I get a phone icon with a red symbol in it. Then I'm able to hold power button and tap the vol up button to proceed. If you're fine wiping the phone, have you tried using the .exe rom file from the HTC site? You need HTC sync installed on the PC, and have phone in download mode use it (at least that's what I've had to do). It should, I believe, reflash recovery mode.
rouyal said:
When I go to recovery mode, I get a phone icon with a red symbol in it. Then I'm able to hold power button and tap the vol up button to proceed. If you're fine wiping the phone, have you tried using the .exe rom file from the HTC site? You need HTC sync installed on the PC, and have phone in download mode use it (at least that's what I've had to do). It should, I believe, reflash recovery mode.
Click to expand...
Click to collapse
I have not tried that. But I would love to, Are you able to provide me with a link to the said rom exe file? As I cannot locate it on htc's site, Unless I am that blind..........
KingCarrot said:
I have not tried that. But I would love to, Are you able to provide me with a link to the said rom exe file? As I cannot locate it on htc's site, Unless I am that blind..........
Click to expand...
Click to collapse
Google search 'HTC One A9 rom', and look for result that's HTC site.
www.htc.com/us/support/rom-downloads.html
The easyest way should: take your matching RUU and flash your device. This solves your problem
Hello guys. I am having an issue with a Meizu E3 phone. I have received it from a friend a few days before he left the country. It has an issue that after it was booting, it was ending up at a black screen, although the light was coming to the panel. The only operation that I could've to perform was holding the power button and the power off and restart icons would show up. After a few attempts, I was able to update it and everything was back. Now my friend is out of the country so I asked him for the pin for the phone, but he doesn't remember it as he used the fingerprint all the time. And I cannot find a way to factory reset it. I cannot do the volume up/down + power combination because I don't have a wipe option. The only option available is to clear user data BUT it requires the pin ... I can get the phone in fastboot tho, but I couldn't reset from there either. Trying to reset the pin through google account is not going to work because I can't connect it to the internet (as you need the pin to turn the wifi on or the mobile data).
Do you got any suggestions?
UP!
cosminroger said:
Hello guys. I am having an issue with a Meizu E3 phone. I have received it from a friend a few days before he left the country. It has an issue that after it was booting, it was ending up at a black screen, although the light was coming to the panel. The only operation that I could've to perform was holding the power button and the power off and restart icons would show up. After a few attempts, I was able to update it and everything was back. Now my friend is out of the country so I asked him for the pin for the phone, but he doesn't remember it as he used the fingerprint all the time. And I cannot find a way to factory reset it. I cannot do the volume up/down + power combination because I don't have a wipe option. The only option available is to clear user data BUT it requires the pin ... I can get the phone in fastboot tho, but I couldn't reset from there either. Trying to reset the pin through google account is not going to work because I can't connect it to the internet (as you need the pin to turn the wifi on or the mobile data).
Do you got any suggestions?
Click to expand...
Click to collapse
You've tried the "fastboot format userdata" command but it isn't working?
If the stock firmware is available for the device, try flashing the stock firmware.
Sent from my LGL84VL using Tapatalk
Droidriven said:
You've tried the "fastboot format userdata" command but it isn't working?
If the stock firmware is available for the device, try flashing the stock firmware.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. Yes I have tried to format/erase userdata and everytime it says "FAILED (remote: Erase is not allowed in Secure State)"
Could you tell me how can I flash the stock firmware on it? Because the only option I have for it in the bootloader is to upgrade the firmware.
I have a package flashing with Qualcomm 9008 mode,link is here. https://mega.nz/#!4YdmyIwJ!QpximadRwxdajGZPj-y91iozBvqNCZloL8FlEQPizIc
btw,in the first time, I flashed it in a wrong way, and now it lost it's SN, how can I restore it ?
Could anybody unlock bootloader with this package?
Hi, XDA!
I tried to fix my SM-A225F, and i need to unlock bootloader. But instead of unlock bootloader option, it shows Show Barcode. Someone please help me!
Idontknownicknameslol said:
Hi, XDA!
I tried to fix my SM-A225F, and i need to unlock bootloader. But instead of unlock bootloader option, it shows Show Barcode. Someone please help me!
Click to expand...
Click to collapse
Greetings...
I will try to help you...
First, you have to enable the Developer mode on your device, going to Settings >> About Phone >>> Software Information >>> Build Number. When you reach there, tap on it about 6-7 times until you get a message saying you unlocked the Developer's Mode.
View attachment 1-Enabling-developer-option.webp
Then you will have to go back to Settings again and look for Developer's mode at the bottom of the list.
When you get into this option, you will have to search for Enable USB Debugging and OEM Unlock options, so you will be able to proceed to the unlocking bootloader...
You must activate both, otherwise it will not show on the pre-download screen! If you get a popup warning, tap enable if you would like to proceed.
Now restart your device into Download mode, pressing Vol Up+Vol Down+Power Button or just Vol Up+Vol Down and insert your usb cable into the device. The usb cable must be connected on your computer first.
View attachment 4-Samsung-Galaxy-A22-Download-Mode.webp
After doing this, your device will go on Download mode and this screen will appear, pay attention carefully before press any key on you device....
After you do this procedure to press and hold Volume UP button, then it will show you another screen, like this...
Now you press Vol Up to unlock or Vol Down to give up and go back to normal.
If you choose Yes, your device will reboot and then will erase all informations and files you had into your phone and will perform a hard reset to factory default, and your bootloader will be unlocked.
If all were done correctly, this is the screen that will show for you from now on...
You're done. Your device is completely unlocked.
In any case, always have an original stock rom firmware of your device, so you can restore the original.
And if you want to lock it again, do the same steps again, but when you choose YES, it will do a hard reset again and go to factory install, erasing all again.
Remember to do a back-up of all your data and stuffs before you perform this.
I hope I had helped with this.