Related
Hi Folks,
anyone knows a tweak or an application that automatcally redials a busy number and beeps if call is successfull. i found a french app that i dont really like cause i dont understand the menu
Thanx
In holland that's a service from our phone provider. Line busy, press 5, hang up. Line available again your phone rings, pick up, receivers phone rings and he/she picks up. (If he/she likes you )
nice.. have to check if your neighbors in the east have that nice service too
thanx for the hint
my solicitation...
see my post...
MoFun-the best russian programm-she can automatic redial if busy-search on wce.by
Try this:
http://www.pocketmax.net/redial.html
Regards,
Nika.
I can't enter settings on my diamond
Probably because you have Manila 2D. Install a program called Second Today to have your original screen to access the settings, or temporarily disable M2D by turning Touchflo off in your Home settings...
When I disable TF3D I have the icon and the menu. When I try to open the settings I am going right back to the today screen without the possibility to change the settings.
Hmmm...sorry... I don't know
I installed that PocketMax redial on my HD2.
As others have noted, you cannot access the settings with Manila running. Presumably, however, most users would not need to change settings often, set it how you want and leave it.
One also cannot exit from the app normally with Manila running. One has to use a process-killing task manager to do that, or just leave it running until next reboot.
However, another problem. When I tested it by calling my home phone with my cell (after leaving the home phone off the hook), it worked, it kept redialing.
Today I tried it where I really needed it, though, in calling a business whose line is usually busy, and it did not work at all. It somehow did not detect the busy signal. Do business phone systems have a different way of making a busy signal, that Redial does not detect? If so, that's a problem, as one is more likely to need a redial function in calling a business, than in calling a residence.
I have tried another one too called Simple Redial. Works in a different way. And has no problems with Manila. You only invoke it after calling the number once the regular way. Then open Simple Redial, which can redial that number the amount of times you select, length of times between redials, etc. One thing I don't like about it--the shortest time one can specify between redials is 10 seconds. To me, that is way too long. (I would rather set that interval to 1 or 2 seconds. The PocketMax Redial goes down to 2 seconds, but has the problems I mentioned.)
It is amazing that Windows Mobile does not have a redial function built in. My previous phone was a "dumbphone", a Sony-Ericsson TM506. That would automatically redial a busy number. Why can't a Windows Mobile smartphone do that? It should be built into the system!
Anyhow, anyone know of any other redial apps for WinMo? As it is a basic function lacking from the OS, one would think that more such apps would have been created to fill that gap!
kulikrom said:
MoFun-the best russian programm-she can automatic redial if busy-search on wce.by
Click to expand...
Click to collapse
Not knowing Russian, it is rather hard to serach for it on a Russian site.
Could you please post the app here? Thank you.
----Edit
Now I did go to that wce.by site, translated into English by Google.
I did a search for "mofun" there, no results at all.
If this is really a good redial software, please post it here.
I didnt really know where to put this, but here goes anyway
I have a HTC S710 with a broken screen. Im currently using it through MyMobiler, but this is really slow and then theres a number of smaller problems with it too.
I was wondering if there was any program which means you can use the resources avaliable on my phone, sms, calls etc, through my pc. Maybe a faster program similar to mymobiler. I think it would be great if it showed a popup when there was a text or an incoming call?
I have searched and not come up with anything usefull.
also, another thing i want to know is if there is any way to make my phone turn on speakerphone automatically upon answering a call?
Thanks, Cris
There are a few diffrenet apps available, but MyMobiler is the best, especially since it's free. There is an app here as well for turning on the speaker during an incoming call as well.
Just a question though, why wouldn't get a replacement device. Seems odd to only control it through your PC.
well, i dont want to replace it simply because im a student, therefore i cant really afford it. Secondly i just like this phone, so it seems a waste to not use it at all any more when it still functions as a phone even if i cant see whos calling.
There is an app here as well for turning on the speaker during an incoming call as well.
Click to expand...
Click to collapse
I dont suppose you have a link to this app do you?
SpeakerPhone v1.05 (cab attached) when an incoming call is received, the speakerphone of your device will automatically turn ON when you receive a call.
Here is the LINK for further info...
thanks
thank you reaper
I've some problem with my Touch Pro, now I try to explane to you:
1) When I put my phone locked in my pocket and receve a call, it automaticaly answer (the automatic answer is disable). This is a big problem especialy when I have my phone silenced becouse I don't know if someone call me and who call can hear all my conversacion and I lost all my credit.
I try some software for Diamond but seem not working corectly no mu Touch Pro
2) When I start a data comunicacion (Internet,..) via Wi-Fi and lost connecion the phone switch automaticaly to 3G or gprs connection without advise, so if I don't see the change I have to pay the connection.
3) When you have ToucFLO 3D active you can't activate other tags, in home screen, for example tasks activity....
Can you help me to solve this tips. They are very important for a correct daily use.
Thanks
Frankvir said:
I've some problem with my Touch Pro, now I try to explane to you:
1) When I put my phone locked in my pocket and receve a call, it automaticaly answer (the automatic answer is disable). This is a big problem especialy when I have my phone silenced becouse I don't know if someone call me and who call can hear all my conversacion and I lost all my credit.
I try some software for Diamond but seem not working corectly no mu Touch Pro....
Click to expand...
Click to collapse
Look at http://forum.xda-developers.com/showthread.php?t=425650
Frankvir said:
I've some problem with my Touch Pro, now I try to explane to you:
1) When I put my phone locked in my pocket and receve a call, it automaticaly answer (the automatic answer is disable). This is a big problem especialy when I have my phone silenced becouse I don't know if someone call me and who call can hear all my conversacion and I lost all my credit.
I try some software for Diamond but seem not working corectly no mu Touch Pro
2) When I start a data comunicacion (Internet,..) via Wi-Fi and lost connecion the phone switch automaticaly to 3G or gprs connection without advise, so if I don't see the change I have to pay the connection.
3) When you have ToucFLO 3D active you can't activate other tags, in home screen, for example tasks activity....
Can you help me to solve this tips. They are very important for a correct daily use.
Thanks
Click to expand...
Click to collapse
2) use advanced config tool found in this forum to disable your data connections
3) Use secondtoday (google search it) which allwos you to run a second today screen. Manilla (touchflo) does not support any other today add on.
ardsar said:
2) use advanced config tool found in this forum to disable your data connections
3) Use secondtoday (google search it) which allwos you to run a second today screen. Manilla (touchflo) does not support any other today add on.
Click to expand...
Click to collapse
With advanced config tool I can disable only GPRS connection, but the phone use other connection H and G.
Now I try to found secondtoday
Thanks
Vanstra said:
Look at http://forum.xda-developers.com/showthread.php?t=425650
Click to expand...
Click to collapse
I've try to install on my Touch pro all programs esxplane on xda-developer site, but no one works correctly on my device. Normaly this software are developed for Diamond, are there problem on Touch pro?
Thanks
I bought tasker and am loving its vast functionality. I've setup various profiles to suite myself. But, I'm having a problem with one and hoped that someone might have a solution or an alternate suggestion for me? the Profiles Name @Home_Early_Hours (11:30 to 06:30 SUN-THURS). It enables itself during the prescribed times/days when it detects that it's near my local home cell towers and is near/connected to my home WIFI.
I don't want my mobile to ring during the early hours of the night and would like to switch my device into Airplane mode to save on battery, but, I'd also like to still receive any calls that I get (in case of emergencies - as I've elderly parents ) so I've tried to setup auto forwarding on my mobile number to my home phone.
I can enable the auto forward using Tasker->Call *21*[phone number]# and disable using it again (exit task) Tasker->Call #21#
Unfortunately, Android responds to these commands with pop-ups "Call forwarding service enable/disable...etc" which take the focus from the running tasker task and appear to require manual acknowledgement in order to remove them, which obviously defeats the point of the automated task!?
I've noticed that the hard back button (<-) also gets rid of the pop-up, so alternately do you know of any way that I can get tasker to send one of those instead of acknowledging it as that might be easier? Annoyingly, I've read that Android won't allow us to manipulate the buttons for security reasons so this might not be possible.
So the only way that I can think of acknowledging the pop-up is to somehow simulate or action a screen touch, as the pop up always appears in the same place?
Does anyone know of any way I could get tasker to auto acknowledge the pop up? or get round this problem. Or has anyone else created a similar profile using a different approach?
There's a Tasker Wiki solution for the auto forward task http://tasker.wikidot.com/call-forwarding but it doesn't cater for the pop-up that I'm getting, so I'm assuming that this worked on an earlier version and maybe the pop up is a new Gingerbread thing?
Many thanks for any response, it's much appreciated.
Bump!
Someone? Anyone? please..
In case you're reading on mobile...
__________________
Device......: HTC Desire S SAGA PVT ENG S-OFF by XTC-Clip
Rom ........: SAGA LBC MOD SAGA v0.4.6
Kernel ......: MDJ's V2=-[2.6.35.13]
Radio .......: 20.28d.30.0805U_3805.04.02.28_M
Recovery....: ClockworkMod v3.2.0.0
Root ........: SuperOneClick v1.9.1
HBoot .......: 0.98.2000 (PG88*****)
I have mine set up to hit the back button a couple seconds after forwarding calls, but this only works if the screen is on. Now, if I could get it to turn on and unlock(no code) the screen...
The Problem: On many non-Samsung phones, all calls, even when answered on the phone itself, get sent to the watch's speakerphone, requiring the user to manually switch the sound back to the handset every time a phone call happens. As a side problem, the watch conflicts with other Bluetooth devices capable of of being used for calls, like car stereos and headsets. Several threads on xda and elsewhere discuss these issues; however, the only solution posted is to disable the "Phone Audio" profile of the watch in settings. This is sub-optimal because it completely disables the ability to use the watch as a phone speaker.
The Solution: I have put together a series of Tasker profiles and tasks that utilize the BlueTask plugin to control the connection of the Gear S3. A convenient detail about BlueTask's disconnection method is that it only seems to affect the "Phone Audio" component of the Gear S3, leaving all other functionality untouched during a call. I use the proximity sensor to determine whether or not the call is being made/answered on the phone itself vs the watch. The assumption is that if you leave you phone in your pocket, bag, or face down on the desk, then you answered the call via the watch. I understand this is not a perfect method for determining which device is answering the call, but it works pretty well in my testing. In addition, an exception is made for when a wired headset is hooked up to the phone, as one may leave their phone in their pocket while answering using such a headset. Finally, an additional profile I call the "Car profile" will automatically disconnect the watch and disable its Tasker profiles while connected to specified Bluetooth devices like a car stereo, Bluetooth headsets, etc.
Setup:
Re-enable "Phone Audio" for Gear S3 if you previously disabled it (Settings>Bluetooth>Gear S3)
Install Tasker (if you haven't already)
Install BlueTask
Go to Tasker>Preferences>UI>Beginner Mode. Disable it (if it is not disabled already).
Go to Tasker>Preferences>Monitor>Display Off Monitoring>Proximity Sensor. Set it to "Yes"
Download the Tasker project attached to this post to your phone
Import the project into Tasker (Press and hold the home tab in the bottom left corner of tasker and then click Import)
Enter the new "Bluetooth" project and open "Car Profile" in "Profiles"
Delete the Dummy MAC address in the Profile and replace it with the MAC addresses of any car stereos and/or bluetooth headsets you use with your phone. If you have multiple of such devices, separate each address with a "/" (the magnifier glass icon does this for you). If you have no such devices, feel free to disable or delete this profile.
Open "Disconnect Gear S3" in "Tasks"
Open the "BT Connection" action
Replace the dummy information with your Gear S3's Name and MAC address
Repeat steps 10, 11, and 12 for the "Connect Gear S3", "Car Mode", and "Exit Car Mode" tasks.
Complete!
Let me know if this works for you. Also, suggestions for how this project could be improved are welcome.
Its works fine on #LGV20 so no need for this fix.
Sent from my LG-H990 using Tapatalk
I've downloaded the project to my phone but when I launch tasker and try to import the profile I can't find the file, even though I can see it using a file explorer. I've changed the.Prj to .prf and Tasker sees it but when I try to import it it gives me an error that says the for contains multiple projects.
Any help would be appreciated, thank you
OneRealDaniel said:
I've downloaded the project to my phone but when I launch tasker and try to import the profile I can't find the file, even though I can see it using a file explorer. I've changed the.Prj to .prf and Tasker sees it but when I try to import it it gives me an error that says the for contains multiple projects.
Any help would be appreciated, thank you
Click to expand...
Click to collapse
Is it downloading as a .prj or .prj.xml ? It should be the latter. If it isn't, rename it to have a .prj.xml extension. Otherwise, not really sure what is going on. I haven't had any trouble importing Tasker projects in the past.
Beginner mode
MehStrongBadMeh said:
Is it downloading as a .prj or .prj.xml ? It should be the latter. If it isn't, rename it to have a .prj.xml extension. Otherwise, not really sure what is going on. I haven't had any trouble importing Tasker projects in the past.
Click to expand...
Click to collapse
Thanks for getting back to me. Im new with Tasker, the only reason I bought it was because of this issue and because I saw your post. All I needed to do was disable beginner mode in preferences, under Ui, and the house icon appeared, from there it was very simple to follow the instructions. Thank you for sharing your solution to this very inconvenient problem.
Once I get to test it ill make sure to give you feedback.
OneRealDaniel said:
Thanks for getting back to me. Im new with Tasker, the only reason I bought it was because of this issue and because I saw your post. All I needed to do was disable beginner mode in preferences, under Ui, and the house icon appeared, from there it was very simple to follow the instructions. Thank you for sharing your solution to this very inconvenient problem.
Once I get to test it ill make sure to give you feedback.
Click to expand...
Click to collapse
Thanks for letting me know about that, I'll add that to the steps.
Hi i downloaded the App but seems it doesnt work for me. I set it up according your instructions but still no change. But i háve an idea i spoted that when i make call from phone i háve an option to choose which audio divice to use if i select my phone it doest work but when someone picks up and then i select it it Works. So i am thinking is there a way to make this automatic? That once someone picks up a call that it select this option right after.
Added 2 screenshots one from the Standard run and one of the option to select an audio divice when making a call.
Thx for any help.
Edit: Works Now thx alot i had an incorrect name set for the device... i will test it if it works always but so far so good. thx alot
Jafabibe said:
But i háve an idea i spoted that when i make call from phone i háve an option to choose which audio divice to use if i select my phone it doest work but when someone picks up and then i select it it Works. So i am thinking is there a way to make this automatic?
Click to expand...
Click to collapse
I wanted to use this system as part of the automation workflow. The problem is that, when dialing someone, it switches the audio output when they pickup, instead of during Phone Offhook (the moment you hit dial). As a result, I can't detect the actual moment the audio device is switched, so I disable the watch audio entirely to prevent it from from happening.
Hello guys. I have non rooted stock nexus 5x. I have followed steps from first post but I always get error (attached).
Please any ideas what's going on?
Edit: Sorry guys. Please ignore it. I have added wifi mac for gear instead of bluetooth mac. I'm going to test it.
I am trying to use this for my phone.
I opened the prj.xml in notepad, edited my MAC address and name of bluetooth for car and gear s3.
When i press the play button in the bottom left corner i get the error non-existing plug-in code type Action: 704475526.
Any idea what i can do?
Thanks.
GabrielAK89 said:
I am trying to use this for my phone.
I opened the prj.xml in notepad, edited my MAC address and name of bluetooth for car and gear s3.
When i press the play button in the bottom left corner i get the error non-existing plug-in code type Action: 704475526.
Any idea what i can do?
Thanks.
Click to expand...
Click to collapse
Probably install Bluetask as per the instructions.
I solved the problem using Macrodroid.
GabrielAK89 said:
I solved the problem using Macrodroid.
Click to expand...
Click to collapse
Can you tell us, the other users, what you did to get it solved ?
As we are in a forum, others can benefit using your solution.
So please share.
I just got my Nokia 8 Sirocco, and I thought it was bad BT performance on my new device, when it probably is my Gear screwing me over. Thank you for this Tasker-project, I've just finished setting it up, and l am looking forward to seeing is effect!
Unfortunately, the macrodroid way don't work anymore for me.
Don't know why.
I am retrying the Tasker way. I get the error:
12.53.42/E FIRE PLUGIN: Connection / com.twofortyfouram.locale.intent.action.FIRE_SETTING: 8 bundle keys
12.53.42/E Connection: plugin comp: com.balda.bluetask/com.balda.bluetask.receivers.FireReceiver
12.53.42/E add wait type Plugin1 time 60
12.53.42/E add wait type Plugin1 done
12.53.42/E add wait task
12.53.42/E Error: 2
Does anyone know what it means?
LE: When i am in the car i don't get this error. Everything seems to be with green dot. But the magic never happen. The tusker is not triggered. Should i make other settings to work?
I also tryed Bluetooth auto connect. Bad luck with that also.
Hi!
I've been meddling with Tasker for the past few days and discovered that choosing the Headset profile to connect to and disconnect from the Gear S3 works better for me.
I've started out with MehStrongBadMeh's guide and tasker xml file (many thanks by the way!), but found out my phone was unable to connect the Gear S3. It disconnected OK to connect the car bluetooth, but would not reconnect Gear S3. Running the task also gave errors as reported by few others on this thread.
But everything seems to be in order when Headset profile is selected for Gear S3. Will test out extensively and will report back if I need to change anything else.
I believe I created that xml was created before bluetask handled specific profiles, hence the need to explicitly set headset now. I don't actually use this profile anymore, as calls started being routed properly when I updated my HTC 10 to Oreo (and continue to be routed properly on my OnePlus 6).
Just wanted to say a massive thank you for this. I have just bought the Galaxy Watch and have a Samsung S6 Edge with lineageos. I was having the issue where everything was being rooted through the watch. Your guide has got this working as it was designed.
My notes would be for anyone trying this - do not change the device name as it doesn't seem to work (i am guessing this is referenced in other profiles) - just change the mac address to your watches Bluetooth mac address.
Any update on this I still get an Error 2 and it never seems to connect on its own to my car audio
Solved with MacroDroid:
Trigger: Call active (any contact)
Action: Kill application Galaxy Wearable
Constraints: Trigger fired Call active
AND In call
App Alive BG Galaxy Wearable