Related
hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas
I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!
Channels don't work.
in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels
ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+
mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.
Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?
Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.
unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!
The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.
tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.
bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.
Hi.
After some changes It seems the new version of bandswitch is compatible with HTC Polaris. Bandswitch is used to swith from 2g and 3g quickly with only one click, enabling to save bettery keeping in 2g and using 3g when needed.
Dani
Thank you, provides very good this application
thank you guy , it seem it work very good on my cruise !
Nice
I couldnt test it on this device because I dont own one but It seems the system to change the band is the same than kaiser, instead of Hermes....So I ve modified it to behave like if It detects the device is kaiser...
Dani
i got a problem, when people try to reach me they automatically get my voice mail (in normal phone settings) i also have problems calling myself (stops a few times and then after trying again suddenly connects). same with messages long delays in receiving and sending...
after setting the band to GSM they can reach me but i have the idea that i cant use 3g????
is there a problem with the phones function t switch between 2g and 3g and do i need this app (bandswitch) for it or is there something with my phone or my opperator-settings?
Hi.
It is operator issues. I have same problem here in Spain with Vodafone. But this problem doesnt happen with Movistar. Being in 2g, if gprs is connected AND there is data flow in that moment then if someone call me it appears as phone turned off. Some friends of mine are telecomunication eng. in vodafone and says Its the sw version of the system, but not related with the pda or its configuration.
Greetings
Dani
ok, thnx
sw version of the system? (do u mean software..)
but is there something my operator can do so it works or must i keep on switching myself in my phone settings?
or do u suggest to use bandswitch?
yes,software.
HTC roms allows to change the band but the process is slows(many clicks). Because of this bandswitch was borned. In fact if you see the first post (in hermes forum) I was searching for a today plugin to switch quickly the band. I didnt find any and I developed this tool. Other operator rom doesnt provide a way to switch the band. Why? I suppose 3G generates more data traffic and more meney for telcos so they fix their devices to 2G. SO you have to use other tools (like bandswitch or commmgrpro) to change the band.
Greetings
Dani
Hello Daniel,
Should V2.5 work with a Cruise that uses the Murata radio?
I dont know that ROM. Today will be out V2.6 beta. In this version I ve changed the way to manage connections because some devices (htc touch, samsung i780) doesnt implement correctly some RAS functions so I hope management connections works for these devices too..
Testers for bandswitch v2.6
Its a beta.
Connection management didnt work correctly on this device because a known problem in some RAS API functions didnt implemented.
http://www.commmgrpro.com/CommMgrPro/files/BandSwitch.V2.6.cab
Changes:
1) Connections management(Stablish, close) has been replaced with IpHelper API so It should work with HTC Touch, Samsung i780 and others. Can you test it?. It would be nice if It was tested with currently working devices (tynt, hermes, ....) and not working devices (touch).
2) Keyboard appears automatically on license and text controls.
3) Unsintall process backed up registry settings to other registry place. It was causing in some devices error uninstalling. It has been solved. When you install old version It can cause error but continues with the installing process.
Greetings.
DAni
pd. Testers will have free license, of course
Testing? Yes!
Hey Dani!
I`ve just downloaded the cab and test it now.
How could I give my feedback?
Frank
Hi,
Here or by mail to [email protected]
Dani
Hi Dani,
i tested your program.
My device XDA Orbit2, O2 Germany, bepes rom 0.67.
worked well for me, only 2 small design issues.
1. every time when starting your program the "auto"-button is grey and not the button i selected before.
2. the "control-box" does not funktioned, only the "close app"-button.
greatings
ppcfox
sorry my worse english
ppcfox said:
Hi Dani,
i tested your program.
My device XDA Orbit2, O2 Germany, bepes rom 0.67.
worked well for me, only 2 small design issues.
1. every time when starting your program the "auto"-button is grey and not the button i selected before.
2. the "control-box" does not funktioned, only the "close app"-button.
greatings
ppcfox
sorry my worse english
Click to expand...
Click to collapse
Thanks ppc
another Buttonbug?
Hey Daniel!
I turned off the Speaker for 30 Minutes with the switcher. After that the speakerbutton shows "Speaker off".
And after a softreset the UMTS GSM Buttons show automatic, but i switched to GSM permanently.
So far
Frank
Nordlicht277 said:
Hey Daniel!
I turned off the Speaker for 30 Minutes with the switcher. After that the speakerbutton shows "Speaker off".
And after a softreset the UMTS GSM Buttons show automatic, but i switched to GSM permanently.
So far
Frank
Click to expand...
Click to collapse
Thanks Frank
When bs is shown the auto button is always focused because Its the first one but it doesnt mean the device is in auto mode. Look at the tray icon. g means gprs. a means auto, etc. I will take a look again to the speaker
Thanks!!
Touch Cruise rom udK R1:
I can't install it, keeps asking me for a serial number.
Once any version of bandswitch you ve 15 days to use it. The countdown doesnt stop even if you install other version. I will do a separate system for betas that doesnt watch if there was any other version installed some time...
2.6.1 works fine
Hey Daniel!
I just installed your new version and it works fine, the button behavior is fixed and i found no errors whit switching 2G/3G, speaker WiFi or BT.
All fine so far, but the beta expires in three days...
Frank
Hi
My first post and my first wm device so please bear with me...
just two questions: speaker volume...searched, seen all the threads, can somebody simply say is there a way to turn it up permanently, not to be lost after soft reset, and if permanently, how?
second, i got my tp but instead of a globe on tf3d in internet tab, there is an ad, or branding of some shop...pissing me off..how to get the globe? dont want to flash rom.
thank you very much...
oh, and cingular radio, much better 3g and hsdpa for me then stock...for those in europe
re
oh, and one more...
is there a way to have tp ask you what to connect to?
so you can pick 3g or wifi, also is there a way to auto disconnect from 3g data after, say updating weather?
thanks again
1. no idea sorry, but it is not that hard to press volume up 5 times to the max... but mine stays at the same level after soft reset
2. you need diamond touchflo 3d config http://forum.xda-developers.com/showpost.php?p=2373839&postcount=1
3. if you are connected via wifi, it will choose wifi over 3g... if i remember correctly, you can use advance config tool to auto disconnect 3g after certain time
thanks man...
tf config worked...
oh and volume, it is too quiet when i do max it, i saw dome db limitations can be removed, and asked hof if anybody knows...
thanks
for the volume, see if this thread helps
http://forum.xda-developers.com/showthread.php?t=420964
diamondtweak
http://forum.xda-developers.com/showthread.php?t=409540
I seem to recall that the removal of the 100dB limiter doesn't work on the Raph at the moment
Hi,
A few months ago, I installed WM6VOIP.CAB which downloaded here. Once installed and configured, GPS stopped working. I had to re-flash the phone and then get back GPS. Does anyone know this issue has been fixed or not?
Thanks in advance
There is a cab file out there that doesn't have this problem:
InternetCalling_21109.cab
http://forum.xda-developers.com/showthread.php?t=446652&page=105
I've tried a lot of the WMVOIP6 installs and this seems to be the only one that acutally works AND doesn't break the GPS in the process....
Do you have any idea why can it conflict with GPS? I downloaded this cab but installation is not sucessful. I guess the file RTCDLL.DLL is using by system and cannot be overwritten. How to unlock this file?
I forget the resaon for the conflict.
Shoot me an email at victor dot anderson at gmail dot com and I'll email ya .cab I'm using for the install - which works fine on my HTC Fuze....
Thank you, finally, I managed to install this cab. The file "RTCDLL.DLL" existed already and that is why the installation fails. I rename this file and then install the cab successfully. Then I setup the SIP settings(I use voipRaider). VoipRaider is appearred on Today screen, and the status changed to "Selected" when I turned WiFi on. Everything looks fine but how to make a internet call? I don't see any option to select internet call from phone contact list. Do you have any idea?
GPS is still working after I installed voip.
HTC_FUZE said:
Thank you, finally, I managed to install this cab. The file "RTCDLL.DLL" existed already and that is why the installation fails. I rename this file and then install the cab successfully. Then I setup the SIP settings(I use voipRaider). VoipRaider is appearred on Today screen, and the status changed to "Selected" when I turned WiFi on. Everything looks fine but how to make a internet call? I don't see any option to select internet call from phone contact list. Do you have any idea?
GPS is still working after I installed voip.
Click to expand...
Click to collapse
Once you're today screen is showing "selected" - then you're good to go - it uses the built-in dailer so just dial as normal either from the dialer or contact list....
Are you on ATT? One of the things that bothers me about ATT is that you can't use VoIP over 3G - but with the other carriers I think you can do this - there is a registry entry you have to change....
Yes, I am on AT&T. I did not make a call over 3G, but I can see "Selected" appears in 3G mode as well. Does this mean I can make internet call over 3G?
Maybe it's me but I can't find the link to the cab in that link you posted.
I can attach for you. here you are:
HTC_FUZE said:
Yes, I am on AT&T. I did not make a call over 3G, but I can see "Selected" appears in 3G mode as well. Does this mean I can make internet call over 3G?
Click to expand...
Click to collapse
sorry it took me so long to get back to ya...fogot about this thread and I wasn't subscribed to it ....
Anyway - if you see 'selected' while in 3G - then yes, you should be able to make voip calls over 3G.
have you updated your ROM or flashed your phone? If you have, which ROM are you using that got this to work?
And which version of the radio do you have?
Thanks!
Hi, Tech
I am using the lastest official AT&T ROM which you can download from HTC web site. I think it was released at the end of May.
One problem to use internet calling is that the voice comes out from speaker. Do you have same problem?
HTC_FUZE said:
One problem to use internet calling is that the voice comes out from speaker. Do you have same problem?
Click to expand...
Click to collapse
Yeah we all have that problem. If you're not going to use a bluetooth headset or a wired headset - there is something called audioroute that can help ya out...
http://www.softwarearea.info/audioroute-v12020.htm
I had some problems with navigating when the phone rings...
After I picked op the phone during navigating I can make a phonecall and
the navigation screen comes back...like it added this...
So that I can keep on navigating during the call.
The problem was that the most times the lost of the comport off the GPS(C4)
After hanging up the call the GPS connection lost his connection most of the times.
After installing this cab (InternetCalling_21109 work with GPS.cab)
The GPS keeps on running during and after dialing...lol...
Deleted the internet calling from the todays screen(I dont use this)
But I think it was not ment to get this function but for me it works!
Maybe someone else can use it 2...lol...
On a HTC Touch Pro T7272 original rom 5.05.404.1NLD
Available here: http://ars.samsung.com/customer/usa...ID=2&PROD_SUB_ID=557&PROD_ID=558&AT_ID=177858
Saw it mentioned here: http://forums.wireless.att.com/cng/board/message?board.id=samsung&thread.id=76446
Crazy week at work means I won't be able to flash my phone any time soon (I forward work to it). But I'm curious of a few things when someone does flash their phone.
If you use any of the following apps, do they still work?
- CHome Weather 1.2 (NRG MiniWeather)
- CHome Configurator
- Tasks Panel
The same app unlock method is reported to work, that's good news.
Help, I upgarde my phone to WM6.5, but my original OS was in Spanish and was from Telcel company (Mexico).
It Change the layoout of my keys, my applications, etc.
How can I remove ATT content and remap my keys layout to spanish?
zeke009 said:
Crazy week at work means I won't be able to flash my phone any time soon (I forward work to it). But I'm curious of a few things when someone does flash their phone.
If you use any of the following apps, do they still work?
- CHome Weather 1.2 (NRG MiniWeather)
- CHome Configurator
- Tasks Panel
The same app unlock method is reported to work, that's good news.
Click to expand...
Click to collapse
I did the upgrade. Not much to get excited about. It doesn't bring much along with it at this time, except for maybe some bug fixes.
CHome Configurator works... sort of. There is a minor glitch in mine in that it hides one of the collapsed panels, but shows it when it is the main panel. Its kind of weird, as it is just a blank space placeholder in that one slot. Its like the panels are overlapping or something, maybe. And it seems to slow the phone down, as well. Like its thinking about something, constantly.
I'm trying to figure out how to get Titanium like the non-touch HTC guys have. That actually looks better, I think. (If anyone has a link, let me know?)
I Just flashed mine, will try to udate on what I notice besides the new orange startup/shutdown windows logo and a beep.
So far what I have observed (will update as I come across them):
_________________________
1. Seem to be running slow even after formatting and rebooting.
2. Contacts now display their pic while browsing in the contact view. pretty cool
3. Phone will remember the last contact highlighted unless you quit the program in task mgr.
4. Can now create groups using contacts.
5. Can't *SMS* or MMS to more than 10 contacts at a time, even while using PowerSMS. WTF?! Hopefully I put in a weird setting somewhere, anyone know how to bypass that limit for SMS?
zorro_sn said:
2. Contacts now display their pic while browsing in the contact view. pretty cool
Click to expand...
Click to collapse
nice find! I am now incented to get pictures of all my contacts...
The sending SMS 10 contact limit (even with PowerSMS which worked on 6.1) is killing me!!! I browsed the registry and didn't see anything obvious. This blows!!!!!!!!!
Hello everybody i have installed the 6.5 update on my jack phone
i have a question, do you know how can i erease the predifine GPRS settings for ATT i am using this phone in Mexico and i need to setup new GPRS Settings but i would like to erease this settings if you know how to do it please let me know thanks
bobby0724 said:
Hello everybody i have installed the 6.5 update on my jack phone
i have a question, do you know how can i erease the predifine GPRS settings for ATT i am using this phone in Mexico and i need to setup new GPRS Settings but i would like to erease this settings if you know how to do it please let me know thanks
Click to expand...
Click to collapse
As far as I know you cannot delete those settings but you can disable with the modaco nodata program, then load the settings for Telcel and works fine.
Regards
Enrique
bobby0724 said:
Hello everybody i have installed the 6.5 update on my jack phone
i have a question, do you know how can i erease the predifine GPRS settings for ATT i am using this phone in Mexico and i need to setup new GPRS Settings but i would like to erease this settings if you know how to do it please let me know thanks
Click to expand...
Click to collapse
The best way that I have found to unlock the GPRS is by finding UAMgr.exe in the windows directory, create a shortcut to it in My Documents and click it to run it. Choose menu, tools, then choose unlock gprs. you should now be able to change the settings and also add connections.
Hope this helps.
jack man said:
The best way that I have found to unlock the GPRS is by finding UAMgr.exe in the windows directory, create a shortcut to it in My Documents and click it to run it. Choose menu, tools, then choose unlock gprs. you should now be able to change the settings and also add connections.
Hope this helps.
Click to expand...
Click to collapse
Great tip thanks a lot
Hi Guys,
Does anyone know what happens to the i637 Jack after WM 6.5 upgrade in regards to being locked to AT&T?
I bought the phone in the US, convinced AT&T to unlock it for me and I am now using it overseas with the local Wireless Phone Provider. Will the phone remain unlocked or will it lock back to AT&T after this upgrade from WM 6.1 to WM 6.5?
Thanks
artem1 said:
Hi Guys,
Does anyone know what happens to the i637 Jack after WM 6.5 upgrade in regards to being locked to AT&T?
I bought the phone in the US, convinced AT&T to unlock it for me and I am now using it overseas with the local Wireless Phone Provider. Will the phone remain unlocked or will it lock back to AT&T after this upgrade from WM 6.1 to WM 6.5?
Thanks
Click to expand...
Click to collapse
SIM unlocking stays across ROM updates.
Question!
What happen if during upgrade your phone disconnects and not turn on? Do invalid warranty? Is there a way to repair it?
*.bin files ??
peeps said:
SIM unlocking stays across ROM updates.
Click to expand...
Click to collapse
Do you mean that I will need to call AT&T after I upgrade to WM6.5 and ask them to unlock the phone again to be able to use other SIM cards in it?
I guess I just don't understand how the provider can "lock" the phone so no other SIMs can be used on it.
artem1 said:
Do you mean that I will need to call AT&T after I upgrade to WM6.5 and ask them to unlock the phone again to be able to use other SIM cards in it?
I guess I just don't understand how the provider can "lock" the phone so no other SIMs can be used on it.
Click to expand...
Click to collapse
once unlocked, it stays unlocked after flashing a new ROM. There is no need to get ATT to do it again.
Anyone figure out the 10 contact limit for sending SMS on WM 6.5 for the Jack yet?
I upgraded my i637 to WM 6.5 this weekend. All is good except for the annoying delay on the home screen when the phone goes to sleep.
When you press the power button to wake the phone up it takes a good 2 seconds before the clock is shown. That did not happen under WM 6.1
I saw a fix for the WM6.5 Lockscreen Delay http://forum.xda-developers.com/showthread.php?t=527219 but it did not do anything for the screen wakup delay on the Jack. Any ideas or suggestions would be very helpful.
artem1 said:
When you press the power button to wake the phone up it takes a good 2 seconds before the clock is shown. That did not happen under WM 6.1
Click to expand...
Click to collapse
I've noticed the same thing. Lame.
Also, the Home Screen is displaying the wrong softkey menu items (messaging Reply/Menu instead of Start/Contacts) periodically for no reason. Annoying. The only perceived benefit from the 6.5 update appears to be battery life, from everybody's feedback. It certainly isn't a better OS.