Related
Solution found: use battery status. In its last builds it has an option to enable A2DP directly by pressing BT tray icon
---------------------------------------------------
Hi mates,
Does everybody has the same problem with BT profiles ?
It goes well from stereo (listening music) to headset (calling) profile, when a call is incoming. But when the call is ended, or if you disabled bluetooth meanwhile (or turned off the headset), you must go to BT options, devices, then tap 'n hold the headset and set it as wireless stereo. Quite a long operation for a simple task, I had in mind that someone could write a cmd-line app which would do this ?
I had once a rom/a2dp patch/reg values combination that worked well with calls ending -> music goes on. But thus it didn't automatically connect the headset (as wireless stereo) on first start. Maybe this is by design, to avoid cutting off the sound coming out from the pda each time you activate BT, but it's annoying to me
So..... Am I the only one ?
Niko
ps: Vijay's VJVolubilis almost do this, but only for headset profile AFAIK
No, the 'not-returning a2dp club' is full of people... you can be the mr. president if you want...
I had the same problem. I returned my BT stereo headset because of the same problems. I'm done with A2DP.
FYI, I asked a few authors to check if they can do something about this.
So you may follow the development of those apps if you're interested in a one-click A2DP Stereo connection : AEBPlus, Battery Status and VJVolubilis.
I'll try to post again when something new is coming.
Ah... have any of you guys tried the later A2DP patches?
And why not just use the bluetooth button to reconnect wireless stereo?
I don't have any hardware button, nor any icon (except the one from battery status) associated to bluetooth. Would you please detail what you were talking about ? If it's an icon, could you try to extract the corresponding exe ?
I tried many A2DP patches, not sure if they are the latests or not, but none provided automatic stereo reconnection, at least when I just turned my headset (or bluetooth) on. Since I do that often....
I mean the button on your bluetooth headset. Click it once to connect; sometimes it needs another click to activate wireless stereo. I know not every headset supports this, but an A2DP headset should.
You might have to set wireless stereo once from the device, but after that, the headset should activate using its button the next time.
Resume problem should be fixed with the AKU3+ A2DP patches. Again, YMMV.
Note: Sorry for the double-post... site's really slow.
joe_dude said:
I mean the button on your bluetooth headset
Click to expand...
Click to collapse
It doesn't have one..... it automatically connect, but in headset mode (phone), not stereo
I'll try to test with another one in a shop.
joe_dude said:
Resume problem should be fixed with the AKU3+ A2DP patches. Again, YMMV.
Click to expand...
Click to collapse
Sorry but.... YMMV ? ^^
Didn't try AKU3.x yet, have you hear good reports from prophet users ? I haven't at that time..
I'll give it a try (or WM6) when my device will be back from warranty
See comment #26. Certainly not conclusive based on one report. I've never encountered the problem, so....
http://forum.xda-developers.com/showthread.php?t=284344&page=3
It doesn't have a button? How does it answer phone calls then? Or the button pops up the phone app on the first press instead of just connecting?
The main button can answer calls, or end a current call.
Its second ability is to turn on/off the headset
I have AVRCP buttons for next/prev music operation, and one of them can dial the last number when pressed for a long time.
I guess I can also reject a call, can't remember how, but the connection thing is supposed to be automatic (Already tried to press buttons to check if it would (re)connect...)
Since it's kind of noname headset (CallStell), I won't even try to request help from them ^^
hum, that's it
ps: What does YMMV stands for ?
I'll give a try to that new patch. Interesting thread btw ! Can't read it completely by now, can I try that patch if I'm still on AKU2.x rom ?
Hmmm... my guess is that the power button or the call answer button should (re-) connect the headset once you have done it once manually ("set as wireless stereo"). Or maybe not.
There are two versions on that thread - one is from AKU 3.3, the other is from WM6. Not much difference between the two, but they are both better than the older Tornado patch in terms of compatibility, IMHO. Either can be used for any version of Prophet AKU 2.0 and up.
Oh, YMMV - your mileage may vary.
please explain more about installation.
where can i get ruu file for prophet?
meykou, just go through this thread:
http://forum.xda-developers.com/showthread.php?t=284344
Makes a lot more sense if you read it from the beginning. Hard to explain otherwise.
joe_dude said:
Hmmm... my guess is that the power button or the call answer button should (re-) connect the headset once you have done it once manually ("set as wireless stereo"). Or maybe not.
Click to expand...
Click to collapse
I once tried many A2DP patches/few rom versions and player combinations.
I got different results, few were very poor, most of 'em was pretty nice.
But it always missed at least 1 thing ^^
Either the sound quality, the resume-after-call or the sound-drop **** ^^
But I'm not sure anymore if I managed to get rid of the latter at least once.. but it was not that bad, one sound drop every 2 songs, for 1 or 2s., or so... still anoying, but usable.
Oh, and what I first wanted to say, I tried to reconnect via the main button, but no results. I should try with another headset, btw. What's yours ? And would you advise me to buy it ?
joe_dude said:
There are two versions on that thread - one is from AKU 3.3, the other is from WM6. Not much difference between the two, but they are both better than the older Tornado patch in terms of compatibility, IMHO. Either can be used for any version of Prophet AKU 2.0 and up.
Oh, YMMV - your mileage may vary.
Click to expand...
Click to collapse
Oh, ok
I downloaded both of them, and will give a new try to every combination I can figure out as soon as I have more time.
Thanks for your answers btw. I'll keep posting if a software solution is found.
And I'm quite sure that meykou only wants a working-one-click-install WM6 rom
Well, good luck. I'm using the i.Tech R35, BTW.
A2DP + Prophet + Music resume
Wow! It works.
It took time for me to realise that it resumes music after a little pouse.
I need to push button only once to cancel the phone call.
Hi Everyone,
I had a strange thing happen to me in the car the other day and I was wondering if anyone had any views on it. As my phone linked up to the cars BT hands free kit the radio cut out as if I was making a call.
To get the radio on I had to turn BT off on the phone.
Interestingly enough when this happened I had Audio manager running. And right enough I played a track and it came out on the cars speakers. This would be quite useful only I havent managed to repeat it yet.
Certainly I get a bit of music in the 'gaps' when I make a call if audio manager is running but that is it.
Cheers,
Andy
!!! come on guys !!!! someone give me some feedback !!!
BUMP
Anyone ? Please ...
i believe theres is a program called bttoggle or btcicle, which routes audio to bluetooth on running it, i use it to route audio thru my bt headset once in a while, a simple search for bttoggle or something like that should sort it, i wonder if i can upload it here... mods if this file is not allowed please delete...
oh the way i use it is i just kept those files on my storage card and put a shortcut for the btaudiotoggle in the programs folder...thats it..click to turn on audio to bluetooth, click again to turn off..
You might want to check if your Wizard is paired with the car BT using A2DP in addition to handsfree mode. If so, that could explain it -- to fix it, just turn off the A2DP pairing on the Wizard, then re-establish the connection when you want to use the Wizard as an audio player.
No A2DP
Nah just a parrot hands free kit in the car. just wanted to be able to play through it as well as making phone calls.
Hi if someone can help me it would be much appreciated. I just bought a Touch Pro and everything is working fine....except for one really annoying issue.
Whenever I connect my bluetooth to a headset, it shows connected but no sound is coming out. The sound is muted. when connected to my Audi, I see that the phone has bars (shows connected and I can dial the phone), but when I make a call no sound. Similarly on my SE HBH-DS970 headset. The A2DP works perfectly, but when I make a call nothing.....I've searched google and through XDA and no solution.
Can someone suggest a solution? I've soft/hard reset the device already. If I should change Radio ROM which one would someone suggest that's stable? Thanks
If no one else has this problem, can anyone at least suggest to me if this sounds like a Hardware or software issue? If hardware I will return it, but if software I will try to find a solution. Like I said the phone connects to BT, but I just can't get handsfree to work. File transfers and A2DP work. Thanks
Just flashed to UK ROM and still no help....I've read some people having the same problems over at the Diamond thread...I'm the only one answering my own thread here hahaha....if anyone can help I'd greatly appreciate it. Thanks.
Hi,
I occasionally had such an issue with my Parrot CK3100, but I did not get the time yet to investigate further. After the call was connected I did not hear anything, and I am not sure whether the other party could hear me.
On another day, the handsfree was working perfectly OK.
Cheers
Michael
Thanks for replying Michael....I'm at a loss and I tried all the suggestions posted. I hope it's a software issue...I'm going to buy a bluetooth headset tomorrow and see if that works. It's not the end of the world, but annoying since all my ppc, s60, BB, and UIQ phones prior to the TP have not had any such issues.
Do you think it's a software issue?
have you tried playing music?
Yes.....A2DP works perfectly....no problems whatsoever with file transfers either....I'm guessing either it's a software problem or the phone has a new bluetooth software that's not agreeing with my older SE headset, but the car is another issue. The Car is 2007 and I'm sure the Bluetooth software is not that old. I've tried Euro WWE and Asian WWE ROM and no go.....I'm going to try the Cingular ROM and see what happens.
Just another quick update....I tried 2 other different bluetooth headsets and still the same problem... for some reason the sound for handsfree will not come through...anyone know of registry hack possibly that will allow sound to come through?
May not be entirely related to your problem...
Mine is worst...whenever I have paired my Jabra or iTech BT headset, when the phone rings, 8/10 times the phone will auto pickup (and no I did not setup the phone to auto pickup) and the it will NOT connect to the bluetooth. Instead it will be just like an auto pickup and the sound will come thru the phone headset. This is driving me nuts!!!!
Hi! I have a brand new Jabra 620s bluetooth-headset. When I turn the headset on and search for bluetooth devices on my computer I can see it, but I cant see it when I search for it on my touch pro.
What could be the problem here?
I had a similar problem last night (and have it quite often when i need to pair). It doesn't detect it until the 3rd or 4th time in which last night it didn't even detect it either. I power cycled the headset and my phone found it the first time.
Yeah, I tried rebooting my headset and my phone several times, but I still can't get it to work...
Figured it out... Had to hold in a button on the headsett to make it avaliable for new devices...
But new problem:
I don't get sound in the headsett when I play music. But when I make a call the sound is in the headsett. What could be the problem here?
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
nyckid211 said:
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
Click to expand...
Click to collapse
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
slogum said:
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
Click to expand...
Click to collapse
You can use Advanced Config to enlarge the bluetooth bitpool under the bluetooth tweaks. Set it to "very high" for best sound quality (uses more system resources tough).
HTH
Maximum bit-pool setting is 1561. I dont think it solves the problem, cause the quality is still really bad.
Any other tips? Or do I have to return the headset cause a brand new ~1000$ phone cant play on a wireless bluetooth headset?!
Bump.. Are there really no solutions?
I am having multiple issues with Bluetooth on TouchPro2:
Issue # 1 with no solution
When trying to end calls using the end button of Jawbone Prime, it does not work, you must end call using the handset.
Issue # 2 (New)
When ending calls with any Bluetooth device (in my case built in Bluetooth in Nissan Altima) the calls will not terminate, have to press end button many time before calls ends
Are there any Bluetooth registry hacks that may solve either one of these issue?
golfman32 said:
I am having multiple issues with Bluetooth on TouchPro2:
Issue # 1 with no solution
When trying to end calls using the end button of Jawbone Prime, it does not work, you must end call using the handset.
Issue # 2 (New)
When ending calls with any Bluetooth device (in my case built in Bluetooth in Nissan Altima) the calls will not terminate, have to press end button many time before calls ends
Are there any Bluetooth registry hacks that may solve either one of these issue?
Click to expand...
Click to collapse
I see the same issue. Sorry no solution.
I confirm same end issue ....although until reading above i didnt know it stemed outside of the plagued nissan vehicles with navigation.
I have a lot of confidence that this will be fixed sooner rather than later since it is now affecting everyday bt headsets vs. one isolated group of nissan / infinity vehciles.
For those who own this phone and a nissan / infinity. we will take this partial victory as it has been a long two years since the last known phone from htc that worked correctly with our cars was a mogul with WM5 / before that the apache.
Its nice to have a working touchpro 2 and nissan ...even if its not 110% with the disconnect issue.
I have an 08 Nissan with the Bose/Communications/convenience package, and my bluetooth worked fine with my i760, xv6800, and Touch Pro. But I experience the disconnect issue as well now with my TP2. Must be the new HTC drivers.
We'll standby for a patch. But I'm pretty sure even though the time keeps running on the radio, that the call still disconnects. In any case, it isn't right, and I doubt we'll see it when we get patched to 6.5.
FYI, from my research this is the widcom stack on the TP2. I thought i read that in the tmobile TP2 forum.
That would explain why it works because microsoft rarely fixes things on windows mobile.
If so it only more confirms ms at fault and not nissan.
The nav radio was always different than the non nav bose radio in the nissans. Different BT modules i believe.
That would explain why you didnt have the problems that so many others did.
I might be wrong on the widcom stack but I woudl think the tmobile and cdma variety are using same chipsets and drivers. for the BT radio
BMW bluetooth
Same issues on BMW bluetooth
Having simmular problems with an JVC BT1 specielly if i use AD2P at the same time.. phone can lag for like 10-20-30 sec someethimes even more....
Getting VERY tired of this!
several BT issues
I seem to be having the same issue as most of the post on this thread ...my headset, and my Infiniti will not end my call , but has anyone else had a problem just trying to get the bluetooth to open from comm manager or settings ? When I try to turn on Bluetooth through my comm manager it says cant turn on bluetooth , and when I try trough settings it says cannot start the Blutooth stack ???? If i do a soft reset BT will work but if i disabale and try to connect again im having the same issue ....some one help me out
TP2 sprint
have exact same issue with my parrot MK6100
have to press end call many time on the remote to end the call sucessfully
Me too, also using Parrot 6100
The bluetooth is a nightmare. I have a Pioneer AVIC-F90BT with v3 software and I can't even answer the phone when it rings. I even sent to phone to automatically answer after 1 ring and when BT is connected it just freezes the dialer. Then when I hang up a call the phone freezes for about 20 seconds. It sucks so bad.
verizon tp2, jawbone prime.
from prime: I can initiate voicecalling. I can answer a call. I just cannot end a call from the headset.
I think the blue tooth issues are due to the locking of the fm raido they reside on the same chip they talk about this on ppcgeeks
I have issues with my Ford Sync as well. If bluetooth is on and I want to use the Sync system I have to turn off bluetooth then turn it back on to get it to work. Quite annoying. I never had any issues with my XV6800 so it must be the bluetooth radio in the phone. Hopefully they come out with an update or when 6.5 is out it gets fixed.
WITHOUT DOUBT THE BLUETOOTH on the TP2. I have the same issue with Parrot 3200. It may be that different drivers would help.
Anyone been brave enough to try anything else?
Ditto here, but I'll take it a step farther:
I'm using a Jawbone Prime with my Verizon Touch Pro2 and it's not only unable to end calls from the headset, but it will disconnect the headset at random in the middle of calls. The only way I figure it out is to pick up the phone when I can't hear anything, only to find the "headset disconnected, place the handset to your ear" message.
Annoying.
arche3 said:
verizon tp2, jawbone prime.
from prime: I can initiate voicecalling. I can answer a call. I just cannot end a call from the headset.
Click to expand...
Click to collapse
Same setup and results here, and additionally the redial last number feature is spotty at best.
When HardSPL comes out, I'm going to offer a bounty for $50 for whoever can get the MS stack working correctly on our devices with all profiles. Anyone else in with me?
Ohiowa said:
Ditto here, but I'll take it a step farther:
I'm using a Jawbone Prime with my Verizon Touch Pro2 and it's not only unable to end calls from the headset, but it will disconnect the headset at random in the middle of calls. The only way I figure it out is to pick up the phone when I can't hear anything, only to find the "headset disconnected, place the handset to your ear" message.
Annoying.
Click to expand...
Click to collapse
Seeing exact same random disconnect issue with my jawbone prime and my sprint touch pro 2. It happened twice today. One time I was speaking and didn't even realize it had happened for several minutes! Any fix for this?
I contacted HTC over this. The more people that complain about it to HTC, the quicker they will release a fix.
MS BT Stack on TP2
helix139 said:
Same setup and results here, and additionally the redial last number feature is spotty at best.
When HardSPL comes out, I'm going to offer a bounty for $50 for whoever can get the MS stack working correctly on our devices with all profiles. Anyone else in with me?
Click to expand...
Click to collapse
I am in. I need the MS stack for my wireless keyboard and mouse.