I installed the latest SensorLock version, it worked normally till today. My TP didn't respond with any gesture and TP screen always lock, even on external power, I have to reset to unlock my phone. And another issue, but I don't know it caused by Sensorlock or not, when I turn off my TP by Power button, the screen turn off and then immediately wake up few seconds before completely goes off. Any suggestion? Thanks.
Related
This problem has suddenly started. If I tap the power button, the screen switches off as it should. But then it doesn't switch back on, no matter how many times i press the button. I have to soft reset.
Please help.
Okay, I've fixed that, but I'm having another problem now. After the backlight is turned off after 1 min, it doesn't turn back on :/
UPDATE: It's only happening when the phone is charging. Screen won't turn on once it's off. Backlight won't turn normal once it's off.
cyanide911 said:
This problem has suddenly started. If I tap the power button, the screen switches off as it should. But then it doesn't switch back on, no matter how many times i press the button. I have to soft reset.
Please help.
Click to expand...
Click to collapse
hello,
how did you repair this?
So I've had my fuze a little over a year now, no major issues. Used mostly energyroms, but about December time I switched back to a simple non-bloated stock rom for the stability.
Anyway today at work I was texting, and I press the power button to put the phone in standby. And the screen remains on and usable. I tried again and it would not go into standby (power button physically feels normal, it does not feel loose or abnormal.) So i let it sit for a few minutes, then i look at it and a message poped up asking if i wanted to turn the phone off (like as if i was holding the power button)so i press no, then it comes up again a few seconds later and aagain and again. So I soft reset the phone.
The phone resets but takes a LOT longer at the att/htc splashscreen, then it hangs at the htc screen and does not make it to the wimo screen, but instead an error screen saying:
"The device is unable to boot because you have either turned off the device incorrectly or tried to install an applicationa from an untrusted source, press SEND to reset your device or press any other button to cancel..."
I think it went through the hard reset this time because when it restarted it asked to calibrate the screen and install stuff. it resets again sometime after that, still takes forever at the splash screen and comes back up to the error, only this time no matter what button i press it wont go away and boot into wimo. It seems like none of my buttons work (they wont light up now) when i slide out the keyboard, it is not lit up like normally.
And heres the kicker, my only way to turn on/off the phone is to take out/put in the battery. As soon as I pop the battery back in the fuze turns on. Is my phone toast? Ive tried to hard reset and the phone does not reach the bootloader, it goes straight to the splash screen. Same with trying to reflash it from my comp, raphealwrapper cannot find my phone.
I've only recently encountered the exact same problem on my Touch Pro, but stock ROM and everything. As far as I can tell, our power buttons are busted and probably need to be serviced. One of the contacts must be stuck in the 'on' position somewhere inside :\ As a temporary fix, I've been using AEButton Plus and remapped double tap end call key to turn the screen off, and removing the stylus to turn it on.
In the search box - have tried locked, locked out and freezing but still not seeing an answer for me.
Basically, for the first time yesterday, my unit just froze. I went to power down fully and it started to shut down but it just froze and the only way out was to let the battery run down.
As anyone else had this and is there a way around, like a reset button or set of keys.. I was just totally unable to unlock the unit, nothing seem to work, be it docked or undocked.. it staid with the unit illuminated and took a few hours to run down and switch off.. Upon reboot, everything seem fine but it was a right pain..
The unit runs standard rom, nothing has been upgraded or flashed/rooted..
Cheers..
Have you tried to hold down the power button for approx. 10 seconds? another solution would be a factory reset...
This happens to me since yesterday. Rebooted several times, still no change.
When my phone is asleep and I try to wake it via fingerprint it won't turn on. Only if I wake it via power button it turns on but I have to wait 30 sec or so until it does. Once the screen is on, it seems to work fine.
I will elaborate this a bit further, maybe I can find out the cause. But has anyone of you had this problem, too?
1) Have you tried to configure finger prints again and see what happens?
2) Put phone to sleep and wake it up in few seconds with the fingerprint, does it wake up or no?
I've had the U11 for several months and everything is and has been great with it. Today, however, several things just stopped working. I first noticed the fingerprint scanner not working, then I noticed that the power button doesn't turn the screen off. The power button works, I can hold it down and the power menu appears.
I adjusted the screen timeout to 15 seconds and rather than the screen shutting off, it merely dims as though I've turned the brightness all the way down.
The phone is completely stock, but I did unlock OEM Bootloader in developer options.
I went into recovery and wiped the cache to no change. The screen won't shut off and the fingerprint scanner does not register anything. Everything else on the phone appears to work fine. Has anyone else had this issue?
The same night, I ran the battery all the way down and let it sit depleted all night. Charged it to 100% and everything started working again.