How to Enter in bootloader for TYPHOON M500 - General Topics

plz tell me how to enter in bootloader for TYPHOON M500. my problem is that my usb got damage and i want to upgrade my TYPHOON M500 with the help of miniSD ... plz help me in this matter. thanks

http://wiki.xda-developers.com/index.php?pagename=HTC_Typhoon ?
if thats not the device you have you can find more
http://wiki.xda-developers.com/

Related

help! error 326 invalid command

Hello, I have a Xda Neo with a english rom Dopod.
I found a italian rom by I-mate and when the update starts, the pda remain in boot mode and the computer tell me : error 326, invalid command.
My pda is locked in the boot mode! can you help me please?
Thanks
Hello,
i have the same problem as you had.
Did you managed to get your device to work again? How?
you can only up rom to equal or higher than 2.15.xxx .
I-mate is 2.13.xx (lower).
good luck!
Yep, thanks
I managed finally with a FRE ROM for S200 and it worked
Hiiiiiiiii,
i have the same problem as you had.
Did you managed to get your device to work again? How?
I tried different ROm but i still in boot loader screen
Please Help me
help me plzz
i have a same prob with xda mini s plzzz help me plz post link for download rom

please help please !! tricolor display !! :(

Hi Guys i have problem i have installed the wm6 rom for tornado ( orange spv c600 ) and when i turn on the phone i have tricolor display first colori red , second color is green, third color is blue
on the first color i have that text :
Tornado
IPL 2.00
Tornado
SPL 2.00.0008
on the second color i have that text:
TORNADO IU
and what i must do ?? please help me ! because i think i have big problem
And who can give me original spv c600 soft i will be very thx !!!!!!!
BIG THX.
Chill dude, you are safe you still have the bootloader, you are damn safe
I bet you did not SuperCID your device, that is why you get this error, now what you can do is to flash back to a normal WM5 ROM from Orange, then SuperCID and flash to WM6
Just on your phone, you willl get the 3 colour screen, then connect the phone to your PC, you will see the USB word, then just run the WM5 ROM upgrade utility normally
thx very much but where i can get original rom for my orange spv c600 ??
When i download rom form orange site http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKDevice&cid=1135315315905&extarg1=Phone&t=SMEDeviceDownloads
The archive rar is failed maybe u have this rom or u know where i can get it please i really seriously need it !!! thx thx thx.
GUYS !!! I DO THAT !!!!!! I GIVE LIVE MY SPV C600 IT WORKS !!!!!! sorry for big letter !! im very HAPPY !!!!!!!!!!!!!!!!!!!!! thx all for help and very big thx for KARHOE ~!!!!!! AND FOR yokozuna for they POSTS !!!!!
Here is a working orange uk aku 2.0 ROM
http://rapidshare.com/files/40809577/c600_email.exe.html
I did it as well!!!!
GUYS !!! I DO THAT AS WELL!!!!!! My SPV is alive again!!!! You are the best!!!
Thanks!
hey guys, i have exactly the same problem. ive try to flash the orange rom onto my phone but the it cant connect!
Make sure you have enough battery charge left on the phone....(Wall Charge it)
1. Turn on ActiveSync USB Connections (check mark it)
2. Turn of the Computer (Restart it)
3. Plug in the Phone
4. Run the W5 Update Utility

Need i-mate Jama Rom

Need i-mate Jama Rom
My I-mate Jama on and show boot screen and off how to solved this problem
Myself is looking for English version of Jama rom
My jama is faulty now. it shows boot screen at startup and dies down. does any one can solve this problem for jama. also how to load a rom into imate jama.
jama support
just do a hard reset pull your battery out press volem key and red power butten now insert the battery while pushing these two buttons a black screen will appear just press send button and the windows will be formated
i-mate jama
hi i know i this is not my thread 4give me my problem is i ve i-mate jama i can receive calls but i cant make call when i try to make call within a seconds it says call ended i ve hard-resette it but still the same problem any solution to this problem thx in advance
imate jama problem
@nasir791
hi dear , i have jama and same problem , when putt batter it show imate logo and after few seconds it's gone off
i try to hard reset but it could't , which volume key i use for hardreset and volume up or down ??
and 1more do u have this new update rom
i need it new rom also
thanx
I'am looking for a German ROM for the Jama. Where can I get it?
why not use the XDA-developers' FTP?
Fcuking Phone
where is ROM ??
if you need to find a rom for the JAM, use the FTP, or google...
First of all here's a link to know how to access the FTP in case you're wondering how to get there:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
However, I think that you're looking for that ROM in the wrong place. This area is for the Magician, aka i-mate Jam. Not Jama. As far as I know the Jama have completely different hardware and thus completely different software.
Hi,
I need the jama 101 english rom. If any one successfull please post a link here.
thanks
br
Where is the link of ROM of this Fcuking Phone ....
Here Is The Link
& Works With MMc
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
bilal shah said:
Here Is The Link
& Works With MMc
http://rapidshare.com/files/113047805/JAMA_8050_WWE_RUS_WM6.rar
Click to expand...
Click to collapse
is it work for Imate JAmA 101

help plllllease imate sp5m

i used ttermpro.exe for upgrade my imate sp5m to wm6 and i excute 'format ALL' after that the phone refuse to boot up just a white screen and refuse to entre the bootloader, any ideas
thanks in advence for any suggestions
Been there done that, sorry to say this but you have bricked the phone.
can any bady show instriction for jtag my tornado (i mate sp5m)with images if you can please
i open it and i do not find the pin's where i connect jtag
thanks in advance and sorry for my english

Xphone,help me......

please help me? old hp xphone IIm O2 can not enter the menu because it is always unlock, how to open it? would be upgraded into a typhoon also tri-color bootloader can not because the keypad is locked, what's the solution? please help me??

Categories

Resources