Database Info

help in jamin stop in boot loader moood

hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all

jamin G3 with SPL 2.13.0001
Hi:
Sorry my english isn't good. I'm spanish.
I read some forum but i don't read the same problem I've.
I've a imate jamin. Last sunday I installed a new rom made by Franlov (WM6.1 Clear). First i make a hardspl and installed the new rom. Well.
After i need install the original rom, but the problem now is:
Jamin KO.
Three color display and the red numbers:
IPL 2.13
SPL 2.13.0001
If I execute a romupdateutility G3, i've a error 300, invalid tool.
If I execute a romudateutility G4, i don't have error but i've the same display (three colors, etc)
I can't make a hardspl because the jamin doesn't run and msdos display says "any device connect".
CAn you help me?
I read it's possible downgrade ipl and spl making a force spl but the program i don't know if exist for jamin or s200.
THANKS
my email: [email protected]
THANKS THANKS THANKS THANKS

melmel1989 said:
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
Click to expand...
Click to collapse
I have the same problem! I cannot active sync as it does not connect to the device. So I cannot flash.
IPL 2.13
SPL 2.13.0000
We tried but can not find solution!
I am tired of asking for help, and nothing!

Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5

After that just follow this awsum guide by dioxda2 http://forum.xda-developers.com/showthread.php?t=353547

aia_6584 said:
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
Click to expand...
Click to collapse
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....

TJSM said:
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
Click to expand...
Click to collapse
1. go to my guide, download PVtemp first ~~~~
2, force the prophet to bootloader mode, (how to? see my thread)
3. plug back to USB ( rear PC USB port please...)
4. if you see the "USB" on the left bottom Prophet screen, YOU ARE DONE!!!!
5. Flash PVtemp NOW .... delay is bad~~~~

help me about this
hi,i have a IMATE JAMIN.my phone Does'nt boot after install wm6 & other program.when it turn on display
ipl2.13.0001
spl2.13.0001
gsm02.20.21
os10.2.0.8
after display a black screen & does nothing.
and USB Does'nt recognize my device.
can you help me?

have you tried to Hard Reset the unit after flashing to WM6.1?
You can try it by pressing CAMERA + COMM Button + Reset Button (for 3 seconds)

{URGENT HELP} I have installed my Magician with Phrophet.. HELP

i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-

jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (MDA I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 MDA I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
Hey dude..bit more info might b nice...what error is it saying? connection error? or ROM error? or what?.. and if it's connection, what OS u running? you need special drivers for the Magician if you're running Vista..

Try unplugging you battery then plug it back - press power button - it will work but just until you press reset. And no more upgrades

jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
hey dude this dopod logo is really an irritating prob u knw wat jus do a hard reset once n den try coz dopod logo take long long time to go n enter the boot loader mode..
so jus giv it a try i hope it works for u ..
Regards Chigz..

Hard Spl White Screen Problem Pls Help!!!

Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..

THere are many posts like this.
Did u do your reading before flashing? Are you using Vista, if so get on a computor running XP, u cannot flash with vista.
Did you unplugg all ur usb devices and any other connection software? Try also other usb ports. I had to try 3 of my 4 before flashing worked for me.
Please read the wiki and search the forums tho, there are many good guides out there like this one attached (apols for zip file, i had saved the web page for use ages ago)
You also dont say what ur IPL/SPL numbers are so its difficult to help, you should list the steps when posting if you need help
Get back if you need more help...

ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hi, I had similar problem even after repeated tries. What I did to get around it was:
1) Run the HardSPL (from Prophet tools or from RUU).
2) Check "I understand the caution..." and click next to get to 2nd screen (see attachment) on RUU where it gives you the 4 things to check before proceeding (here your Prophet must be entering the white screen).
3) Leave the RUU on the 2nd screen on the computer and disconnect Prophet after white screen gets stuck and activesync disconnects).
4) Reboot Prophet.
5) Reconnect Prophet and wait for activesync connection to be established.
6) Now on the computer check "I completed the steps indicated above" and click on next.
Hopefully this should go ahead and HardSPPL your Prophet.
Do let us know if this worked.

possible solution for ya
Code:
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hey,same problem here...but you probably got rid of the prophet already...well hope it helps someone else
thank God i had surfed to other sites and found this HARD SPL utility.
Its in "wm6 Update_Package" ...might as well be from here..
(dont know who made it-i`ve been downloading so much stuff lately from the web no offence )
maan...how do I add an attacment here?
ahah-here it is..
hey...what`s up with this...cant upload...its under 8mb,why is it bugging me with "upload of file failed"?
ok...this means war..
anyway here is the link http://rapidshare.com/files/233302800/HardSPL_G3_and_G4.rar.zip.html

ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
pinoy ka gin???
text mko kung malapit ka lang sa manila.. help kita...
09085524216

Hi
where i can download hardspl for g4?

Help

My Cruise connected to USB to my computer is stuck on the screen rainbow of 4 strips red, green, blue and white top left says: POLA100
SPL-1.25.0000
CPLD-15
Can you tell me if there are ways to repair or return HTC.
I say that I am no home and no computer that my English comes from Mr GOOGLE
Thank you in advance to you all.
Philippe

Please use the forumsearch
Hi Philippe!
I think, that you would upgrade ur device with an cooked ROM.
First you have to flash hardspl and after that you could flash any ROM you like.
If there is any problem with hardspl try searching "mtty" to fix your device.
So far
Frank

Hello Frank
First of all, thank you for your reply.
Unfortunately I have tried without success MTTY because I did not find USB, I think it does not work with Vista.
When I admit hardspl not know.
That is 8 days since I seek a solution found nothing
Best regards
Philippe

I need help

I accidently HardSPL my Qtek 9100 phone with PProphet LF Xtreme BLUE V2
and now my phone is getting hung after showing first boot screen HTC INOVATION and comes to the blue page imate where it shows the IPL , SPL, GSM and OS information.
what will i do now please help me to revert my OS

by searching xda developers forum i come to reach at this URL http://forum.xda-developers.com/archive/index.php/t-275350.html
by pressing and hold camera button and turning on the qtek 9100 it comes to the multicolor boot screen here i connect my phone with usb and it shows usb at bottom of the screen of phone.. but now what should i do to revert back or to make my phone use able as i HardSPL my phone with wrong ROM
please help me, i will be very thankful to you guys.
waiting for replies, kindly reply me asap, i know you guys can do help me.

What IPL/SPL...? it displays? What exactly you mean by 'as i HardSPL my phone with wrong ROM' ?, Did you actually apply HardSPL (Patched IPL/SPL),does it show IPL 2.21.0001 and SPL 2.21.olip ? or it shows original official IPL/SPL.If its still with Official Bootloaders,then download the Official Qtek rom and flash it in Bootloaders (MultiColor Screen),when you get it and usb appears at the bottom of the Bootloader Screen,hope it'll work.
You can download the official Qtek rom from this link :-
http://s131209249.online.de/vodafone_software/9100.htm
Good luck!

Thanks zabardast_1
I solved my problem by the help of xda-developers I found another thread where i found the solution i was doing a little mistake that i wasn't disabling the Active Sync now I am happy and looking for some more custom roms
Thanks