Hello!
Since I had battery problems and the active sync always active was the main cause (now I can use the Pro for two days, otherwise at dinner time it was dead already), I read a lot about it and people told to kill the notification with taskmanager called replog.exe, or something like that.
It worked well, the problem is that I still want to connect to activesync to install programs and sync with outlook and now I cant. device is not connected at all.
how can i start activesync manually or solve this issue?
please help! this is getting me nuts!
Deiota
Related
Hi
A couple of days ago I realized that my Qtek 9100 no longer processed my reminders. My phone don't any longer play a sound and pop up a window at the time/date a reminder is due.
I checked the settings and everything is set correctly. Then I reset the Qtek and it still didn't go back to work normally. The last step was to switch it off, remove the battery and switch it on again. That did the trick, everything went back to normal, however only for a time. Next day same situation, reminders do not process. Again switch off, etc., and again it returned to working normally and again until some time....
I don't know if and what program I might have installed, and I surely don't know what causes this malfunction nor how to get rid of it.
Anyone out there who could give me a hand on solving this problem?
cheers...
May users have notification problems (in WM5 and WM6 devices). Search forum and you'll find FAQ about NQ and reminders problem.
My experiences: since I use pmClean (free) and SKTools (commercial) everyday my notifications and reminders work without any bugs for more then 2 months. Both applications have scheduling then you don't have to run them manually.
I don't synchronize my Artemis with Outlook on PC, maybe it's useful too.
Good luck.
PS. You could try Check Notifications, but for check only (suspicious notifications are in red color), don't use it's clean feature or you could have NQ cleaned too much
Hi
Thanks for you help. I installed the pmClean and the notifications came back after cleaning. However the next day again they were blocked again. May I ask you how you configured your pmClean? Do you run it automatically? If so, one or more days per week? Do you let it execute a soft reset after cleaning?
ceers
fbraun said:
Hi
\May I ask you how you configured your pmClean? Do you run it automatically? If so, one or more days per week? Do you let it execute a soft reset after cleaning?
Click to expand...
Click to collapse
Actually I use 2 programs now - pmClean runs one a day (auto, with no reset) and SKTools - once a day too.
Hi.... I installed pmClean and even purchased SKTools.... but every day I realize that the reminders don't work. I have the pmClean programmed to run every day at 06:00... doesn't help. The reminders seem to works however always after I did a reset. However it looks that inbetween the next day something happens and the reminders again won't work. Any idea on what I could do? Is there anymore server reset like uninstalling all programs but mobile 5 itself and re-install everything?
cheers
Try not to synchronize with PC and see it it'll help. You may also use WakeUp Tweak to make every night cleanup longer.
I know WM5 and WM6 bugs in NQ are very annoying and MS ignores our prayers for years... I always think about new Android from Google when it happens to me
You may also read this:
http://forum.xda-developers.com/showthread.php?t=333521
and this: http://discuss.pocketnow.com/showthread.php?t=19884
Good luck.
Hi
guess I finally figured out what caused the problem. It's not the Qtek 9100 but the ActiveSync application. I suspected this yesterday after reading some comments. So I decided to not connect my phone to my note which always triggered the ActiveSync to load. And since my last cleanup and soft reset yesterday all reminders worked. The WM5 sync at midnight didn't do any harm. Now the question is how can I fix ActiveSync? At least I'd like to be able to install programs on my Qtek which always comes with a sync. Any idea? Or do I simply have to always run pmClean followed by a soft reset after having my Qtek being connected?
fbraun said:
Hi
At least I'd like to be able to install programs on my Qtek which always comes with a sync. Any idea?
Click to expand...
Click to collapse
You still can install programs without Activesync partnership (your device is seen as Guest).
guys
help me out here please cause I am going bonkers.
up till yesterday , i was synching my exec with my vista laptop flawlessly.it laptop used to recognize ppc as soon as i turned bluetooth and connected it ,and sync was always successful without errors.
however as of yesterday I cannot sync anymore.I did not install anything new neither on ppc nor on laptop.
Whenever I try to sync ,on ppc I get that i am connecting (the 2 inverted arrows on top of screen) but keep getting WAITING FOR NETWORK .and even though I press sync nothing happens.
I noticed that on my laptop,ppc is not being listed in the MY COMPUTER page as a devise with removable storage ,as usually happens.
I was thinking of performing a hard reset but am worried that even though i do this I won't be able to sync and thus lose all my present contacts and calender entries
Apprecaite your thoughts
no ideas guys???
nobody can offer his views???
Hi...to some of the more experienced hands out there. I have a problem with Microsoft Active sync 4.5.
I introduced new categories for my contacts in Outlook 2007. these copied fine, but what happens is...i get an error message saying synchronization cannot be completed. at this time, when i sync using the active sync application on my vox, it works and synchronises fine....all this after i disabled advanced network functionality.
the above process takes nearly 10mins! that too, after i manually press the sync button on my mobile! is there any way to solve this problem?
also, i wish to know if there is anyway one can add more fields to the phones contact book. i added and entered data in new fields in outlook 2007, but this wasnt transmitted to my mobile.......we have useless entries like pager, radio ( what the hell is that!! ) and so on, but not a single place where one can enter an extra mobile no. for instance!!!
can any one help? tried a lot of fora, but no one seems to have any proper solution for this one!
a new challenge for xda developers forum! thanx in advance, its maddening doing this sync manually every bloody time!
Try deleting the device from activesync while device is disconnected and then adding it again by reconnecting.
Tried but no result!
thank u but i tried all the obvious solutions.....else i wouldnt have started this post. all this works only with advanced network functionality off, mind u, and it takes ages!
rghai6 said:
Try deleting the device from activesync while device is disconnected and then adding it again by reconnecting.
Click to expand...
Click to collapse
Get rid of ActiveSync ASAP else you will regret
getting rid of active sync is fine, but the alternate solution? how else do i sync all my info? do u have any good programs for that? can u upload here
Heya, This is my first winmo device (HTC Raphael [aka HTC Fuze for At&T]) ever and I'm having an abominably annoying time with active sync for wm6.1
every once in a while when I plug my phone in for syncing, I get this error that says:
Result:
There has been a change made on your server that requires you to re-synchronize all items on your device. Please perform a manual sync.
Support Code: 0x80883001
Last synchronized:
Today 11:49 PM
Last attempt:
Today 11:49 PM
I don't know what in the hell is wrong with active sync, but I do know that everytime it does this re-synchronization, I end up having to re-add all my contacts on the People tab on my TF3D interface AND I lose all the custom ring tone assignments for everyone. Is there a way I can make this stop. It's obscenely annoying and I hate active sync with a passion of a million burning suns.
help please?
The only times I've seen this message or a similar one, is when I try to sync with my laptop when I travel and it has a different time than my phone. For example, my laptop is one hour behind the phone time or the other way arround. Fixing the time settings has solved this for me in the past. Though I don't know how would this impact your contacts...
PS,
I hate it too...
The odd thing is, it happens very randomly and I have no idea why the change is there and why it screws with tf3d's favorite ppl tab and assigned ringtones, but it's annoying as all hell.
do you sync outlook calendar items?
I believe I do. I'll try changing something on the computer then sync it and see if the message comes up. otherwise I'll do the opposite and see if that's the issue.
I found out that after adding an event into my calendar via the fuze, active sync will display the above mentioned message and proceed to erase all my contacts in the "People" tab as well as all ringtones associated to all the callers on my contact list.
Help please?
Who do I have to make love to here to get some help?
p.s I'm a very kinky person irl
lol. we're trying to help everyone...
alright, which operating system are you using?
(are you female?)
I'm using Windows Vista
(I can be any gender you like, I don't do S&M though)XD
HELLO
HELLo
HELlo
HEllo
Hello
hello
Here is some more info for you. Says something creating outlook subfolders on the desktop w/o syncing first. Anyway, seems like this is the problem you are describing.
http://social.microsoft.com/Forums/.../thread/161c69c7-eba5-4909-8b2d-0212b5309c41/
I was actually browsing that exact thread. The problem is that I haven't made any folders under outlook. The only thing I did was to add an event into the calendar. Suppose I have an appointment next week say, Monday February 2nd. I go to my fuze and set the appointment via the calenda soft tab. From there, I later sync the fuze to my computer (Vista) and then the error message comes up.
Any attempts to delete the partnership and then recreate a new one will simply just erase all the people I have under the "Peoples" tab on my TF3d Interface. I'd also like to note that all the ringtones that I have assigned for specific contacts also get erased.
honestly, i can't think of anything...
I'd hard reset if i were you
and if you're using vista, you should try to use WMDC 6.1 instead of activesync
WMDC? is it an alternative to syncing?
Sorry, This is indeed my first windows mobile phone so I have very little grasp on various WM softwares and such.
That microsoft forum thread mentions some suggestions to compact your Outlook pst file and check it for errors. If you are syncing to an Outlook pst file, then I would disable the cache mode option in Outlook, make a backup of the pst file, check it for error / repair and compact it to see if that helps.
hihi...lol
i have this error...
win2k
officexp
htc touch diamond2
:-(
If it was my type of problem as in everything gets wiped out and replaced back in (therefore screwing up the tf3d peoples tab.. then I found the answer..
when sync your phone, you are asked what to do if there are conflicts. I misread it and chose replace on device... It should be replace on desktop. Basically I told it that if there was a conflict, to replace everything on my device rather than on my desktop.. now that I changed that, i haven't had that problem.. at all.
''repllog.exe''error
hi guys,
i m facing the problem when i connect mobile via sync it shows error
''can not exute repllog.exe''
plz help me.
thx.
i understand that this question may have been asked many times in this forum but considering that they are rather dated and i have yet to get a solution to my problem i thought i started a thread here. Do bear with me as i'm rather new to using a WM device and to this forum but i thought this would be the best avenue to hear opinions and suggestions.
i'm currently using a Sony Ericsson Xperia X1i, ROM version1.02.931.3
all along when i have been using this phone, never once did Activesync start up on its own unless i connected my phone to my PC.
Recently, i accidentally pressed upon turning on the Microsoft Direct Push option found in my Comm Manager program and ever since then (even after turning it off) Activesync has been constantly been running minutes after me having closed the program.
I have tried many methods that i have come across while checking search results in google and in here (especially in the wiki).
from creating a fake server to having set my schedule updates to manual for both peak an non peak timings, to having disabled AppRunAfterTimeChange from the notifications list of the program “repllog.exe”. i have even deleted all notifications relating to “repllog.exe” (thank goodness to memmaid being able to restore the notifications!) and still the problem occured off Activesync still running by itself after having been closed.
i'm kind off exhausted as to how to resolve this problem of mine, i do know that some pple would voice that Activesync running all the time is normal but having gotten my phone without this issue it would please me most if i can actually have this problem not occuring at all
i do appreciate you having to read my mini wall of text and do hope that someone out there has a solution!
quickmenu is supposed to be able to close it permantly when active sync is closed, but thats not much good if u dont sync. I have had this issue before. Now for some reason my jamin with 6.1 doesnt do it (but never used exchange before) and my polaris does (have used). The only way i was able to stop it was a hard rest, drastic i know.
I'll have a search for you as i have read other methods but cant remember if they were successful or not!
well i didn't have that problem when i first got my x-1 : |
really have no idea wad to do to get it back to its previous state
as much as i've gotten used to activesync popping out forever
but i'd really wish for a solution where i can get it to be 'away' and come on only when i sync