hi guys my HTC TC just fell on the ground , everythin seems to be workin fine no damages in functioning appears. however i noticed that when later i removed the stylus and then put it back a click sound ( break sound ) happened. still functioning is ok but when putting the stylus into the phone , the phone seems to expands a lot in the area where the stylus is :S less than a 1 mm but still it concerns me , what might have happened and is it serious ....thankyou
Related
A while ago my Fit that's practically new started to work all by itself . Problem is that touch screen wont work properly. When I unlock the phone it works good, but after a few moments it starts apps all by itself, then I lock it, unlock again... I tried every single rom, custom, stock, even 2.2.1, but nothing worked. After rom flashing phone works fine for 2-3 days, and then it starts to annoy me again. It never fell into water, on the floor or something like that...
Does anyone know what the problem is? Is it hardware or software ??
it must be a hardware problem
sometimes dust accumalates beneath the screen and above the real touchscreen
as ur phone is new give it to the service center under warranty
hope it works
Answer
I also think it's hardware, but guys from service center will definitely solve this issue...
sometimes.. i have the same problem.
i don't understant english very well, i speak spanish but i think i understant your problem, and it's the same that my's!
sometimes.. when i want to unlock, touchscreen not work..
i think that its a software problem
i have never faced such prob but long ago i had a problem of wrong pressing buttons... and i just restarted it now its fine... well before goin to a service center make sure tat u are on stock rom.. try installing full package via odin it may solve your problem just try once..
I Everyone,
I notice this issue after i had replaced my touchscreen from a local dealer he has installed Chinese touchscreen is of ok quality as it provide 3 touch points after that day my phone proximity sensor started showing problems like sometime while receiving call my proximity sensor didnt work and some time screen use to go blank and didnt wake till the other guy didnt cut the line or have to continually press the power or home button to wake it up ... and then disconnect the call..
1.) I did sensor test for my phone and found that only after pressing at the place were sensor is situated it worked but only till your pressing it ther later it wont ...
2.) I did try to this http://forum.xda-developers.com/showthread.php?t=1313232 but it didnt work
3.) I tried to half Dissemble ( that mean i had opened the black panel were camera sensor is situated i didn't went further as i am not well known with such soc ) and reassemble my phone but it didnt work as there was no improvement .
Can someone help me how to fix this issue / and also if required i have tools to dissemble it and needed guide to do it.
Reserved
tanmoyc said:
I Everyone,
I notice this issue after i had replaced my touchscreen from a local dealer he has installed Chinese touchscreen is of ok quality as it provide 3 touch points after that day my phone proximity sensor started showing problems like sometime while receiving call my proximity sensor didnt work and some time screen use to go blank and didnt wake till the other guy didnt cut the line or have to continually press the power or home button to wake it up ... and then disconnect the call..
1.) I did sensor test for my phone and found that only after pressing at the place were sensor is situated it worked but only till your pressing it ther later it wont ...
2.) I did try to this http://forum.xda-developers.com/showthread.php?t=1313232 but it didnt work
3.) I tried to half Dissemble ( that mean i had opened the black panel were camera sensor is situated i didn't went further as i am not well known with such soc ) and reassemble my phone but it didnt work as there was no improvement .
Can someone help me how to fix this issue / and also if required i have tools to dissemble it and needed guide to do it.
Click to expand...
Click to collapse
Did you found a solution for that? I have the same problem with my Landvo L800!
Thanks!
eteles said:
Did you found a solution for that? I have the same problem with my Landvo L800!
Thanks!
Click to expand...
Click to collapse
No i didn't because replacing the touch screen wud cost me around 3500+ rupee from Samsung were as in local market you would get new phones for 4500+ rupee with much better hardware and latest OS which was ginger bread and ICS during those days so i didn't go for repairing it and when i tried inquire to second phone retailing shop cost of this phone if i buy second hand it was sold for 1500 rupee so.... it was not worth investment .
Lost touchscreen handling in upper and lower part of my screen!!!Pls Help!
I have a rooted device with xsba's custom rom (4.0.4). The problem started before this ROM. I am pretty sure that this is no rom issue. I have flashed the phone several times with numerus roms. Problem persists.
I already have changed touchscreen once because of a serius fall (broke) approximately 6 months ago.
These are all the facts. Before xsba's rom i used thiaiz o3d. (2.3.7). The problem started one day that i hadn't charged the phone up. When the battery fell under 5 % the phone went berserk. (Numerus button presses all the time)
I couldn't even reboot. When I finally turned it off by removing battery and restarted the phone the upper field of touchscreen of the phone never worked again.
Yesterday i failed to charge again.ASfter finally restarting the same issue appeared in the lower field of touchscreen. Please advice!!!!!!!!
Is there a way to solve this problem without changing the touchscreen?
dim2004 said:
Lost touchscreen handling in upper and lower part of my screen!!!Pls Help!
I have a rooted device with xsba's custom rom (4.0.4). The problem started before this ROM. I am pretty sure that this is no rom issue. I have flashed the phone several times with numerus roms. Problem persists.
I already have changed touchscreen once because of a serius fall (broke) approximately 6 months ago.
These are all the facts. Before xsba's rom i used thiaiz o3d. (2.3.7). The problem started one day that i hadn't charged the phone up. When the battery fell under 5 % the phone went berserk. (Numerus button presses all the time)
I couldn't even reboot. When I finally turned it off by removing battery and restarted the phone the upper field of touchscreen of the phone never worked again.
Yesterday i failed to charge again.ASfter finally restarting the same issue appeared in the lower field of touchscreen. Please advice!!!!!!!!
Is there a way to solve this problem without changing the touchscreen?
Click to expand...
Click to collapse
Now , you need to go to developer options in the settings and enable show touches option. Then you touch and slide to the parts that don't work . If you see the line going there , then it's a problem with your ROM. If it's not , then you possibly have a broken touchscreen. Check the contact of the touchscreen ribbon and see if it's tightly sitting on the slot , press it down and try again.
If it's not working , you have no choice but to replace the touchscreen. You can buy one off eBay for 19 dollars and free shipping. It's made in China but it works well without problems for the past 6 months with my device.
Hope I helped.
Cheers!
Sent from my LG-P920 using xda premium
boltthrower56 said:
Now , you need to go to developer options in the settings and enable show touches option. Then you touch and slide to the parts that don't work . If you see the line going there , then it's a problem with your ROM. If it's not , then you possibly have a broken touchscreen. Check the contact of the touchscreen ribbon and see if it's tightly sitting on the slot , press it down and try again.
If it's not working , you have no choice but to replace the touchscreen. You can buy one off eBay for 19 dollars and free shipping. It's made in China but it works well without problems for the past 6 months with my device.
Hope I helped.
Cheers!
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I have already checked the rom.the problem is not there.I have checked the contact of the ribbon yesterday and everything was fine.The touchscreen that i have is a chinese one.And it lasted for 6 months or so. So you might want to get ready for a new one as well!!!!!
I am going to buy one for me from ebay today. I have no choise as it appears.
I feel the need to thank you for your time and for the solutions that you provided me with.!
You have been most helpful.
HI did you ever solve this? I have the same problem, or very similar with middle and lower sections of screen dead, strange ghost touches and screen going crazy every so often, all started after I rooted phone. Was it just a broken touch screen? Cheers
gadget9192 said:
HI did you ever solve this? I have the same problem, or very similar with middle and lower sections of screen dead, strange ghost touches and screen going crazy every so often, all started after I rooted phone. Was it just a broken touch screen? Cheers
Click to expand...
Click to collapse
My friend i changed touchscreen and problem solved.
Thanks for the reply, good to know that it solved your problem, I have a new screen ordered, hopefully will solve mine too:good:
I have a photon Q LTE
Something is terribly going wrong with this one , first the front camera stopped working , when i click , nothing happens , the button is greyed out i thought it was software so i factory reset , still nothing rear camera is working fine though.
then when i opened the keyboard the touch screen becomes disables , i can't do anything on via touch screen when keyboard is opened.
then now touch screen completely stopped working
i think hearing songs in bathroom was not a good idea , moisture got in , i believe , i tried many ways to dry it out but eveyrthing is becoming worse.
i am out of warranty and sprint charges 50 dollars and not guarantee of any recovery
any help would be highly appreciate.
All of the things you describe indicate some sort of hardware issue - with water certainly being suspect if you think it got into the device.
I'm not sure what we can suggest exactly, other than the obvious - throw it in rice and hope, although most of the components are sealed, so if you are experiencing issues it is probably too late.
Usually when I leave my Nexus 5 alone for a long period of time (when I go to sleep), it starts acting weird when I turn it on. It touches the screen by itself, kinda like ghost touches. I don't know how to fix it.
I'm facing the same problem with my phone (mine it's Tecno M3), but I've read many different forums but still not yet found a solution for mine...
but i got a hint for you. maybe it's gonna work for your device..
here it is... a user who face the same problem, ghosts touching, keyboard instability using HTC ..
so you got try for your Nexus
""I found the problem it's not hardware or software... I have been fighting in finding the cause for my problem for 4 days (full days)... I have read all the posts in almost all threads in the internet:
- I upgrade to ICS 3.3
- I tried all roms in avialable in the net (also jb 4.2 without sense).
- I put the phone one night witouht battery and recharge the phone without tuoching the screen.
- I tried the Aluminum foil and made a better contact with the silver pin in back cover.
*** BUT NOTHING HELPED ME, MY PHONE STILL CRAZY ***
- I can't pull the ring from first time..
- I can't answer calls...
- The device randomly opens programs...
So the cause is: When I put my sd card (32 g) it has a abdominal !!!! and this the problem !!!!!
When you put the Sd Card the abdominal lift the lid and this cause a
contact with aluminium in the back cover !!
Just put a piece of paper or whatever to avoid contact between the back cover and the SD-Card's lid.
I hope this will help you ""
gur79tub said:
I'm facing the same problem with my phone (mine it's Tecno M3), but I've read many different forums but still not yet found a solution for mine...
but i got a hint for you. maybe it's gonna work for your device..
here it is... a user who face the same problem, ghosts touching, keyboard instability using HTC ..
so you got try for your Nexus
""I found the problem it's not hardware or software... I have been fighting in finding the cause for my problem for 4 days (full days)... I have read all the posts in almost all threads in the internet:
- I upgrade to ICS 3.3
- I tried all roms in avialable in the net (also jb 4.2 without sense).
- I put the phone one night witouht battery and recharge the phone without tuoching the screen.
- I tried the Aluminum foil and made a better contact with the silver pin in back cover.
*** BUT NOTHING HELPED ME, MY PHONE STILL CRAZY ***
- I can't pull the ring from first time..
- I can't answer calls...
- The device randomly opens programs...
So the cause is: When I put my sd card (32 g) it has a abdominal !!!! and this the problem !!!!!
When you put the Sd Card the abdominal lift the lid and this cause a
contact with aluminium in the back cover !!
Just put a piece of paper or whatever to avoid contact between the back cover and the SD-Card's lid.
I hope this will help you ""
Click to expand...
Click to collapse
Don't recommend things which bare no relevance whatsoever to the Nexus 5. It has no SD Card slot therefore it is not helpful.
Niiqht said:
Usually when I leave my Nexus 5 alone for a long period of time (when I go to sleep), it starts acting weird when I turn it on. It touches the screen by itself, kinda like ghost touches. I don't know how to fix it.
Click to expand...
Click to collapse
On some chargers the Nexus 5 touchscreen tends to screw up quite a lot. Mine had an issue where a Samsung Adaptive Charger was pushing 2A into the phone and the screen was close to unusable. Try using the stock charger plug and see if that helps.
humzaahmed155 said:
Don't recommend things which bare no relevance whatsoever to the Nexus 5. It has no SD Card slot therefore it is not helpful.
On some chargers the Nexus 5 touchscreen tends to screw up quite a lot. Mine had an issue where a Samsung Adaptive Charger was pushing 2A into the phone and the screen was close to unusable. Try using the stock charger plug and see if that helps.
Click to expand...
Click to collapse
I don't have a stock usb, only a third party one. I've also been doing some research and it looks like the digitizer needs replacing, but I don't think that's true.