HI all,
I'm experiencing the following problem with my Cruise.
When having the Cruise connected to my PC through USB cable (Activesync on), mobile applications other than IE cannot access the Internet.
My configuration is:
on ActiveSync
my computer is connected to: "work network"
on the Cruise
start > parameters > connections > connections
advanced tab > network selection is set to work network for both types of networks
proxy configuration on the other tab is the correct one for my network
The only application on the Cruise capable of connecting the Internet with this configuration is IE: when starting, it asks for proxy username & password and pages are loaded correctly.
Any other application (the HTC today screen, when looking for the meteo data, Opera, QuickGPS...) do not arrive to connect the Internet falling in timeout (no request for proxy authentication).
Of course, at home (ActiveSync configured as connected to the Internet) everything work fine and all applications connect to the Internet w/o problems.
Any idea?
Thanks
Hi all.... ive got pretty much the problem? Any solutions guys??
Pretty much same here, except for QuickGPS... it manages to connect somehow.
it works for me, but without proxy...
Maybe this would help you?
Hey Wis38!
Just try to open the following ports ins your proxy:
990 (RAPI)
999 (Status)
5721 (DTPT)
5678 (Legacy Replication)
5679 (Handshake & Legacy Replication)
26675 (Airsync)
For further informations try the MS kb259369 and kb904667.
btw, good luck
Frank
Yeah, thanks.
But I'm not proxy administrator, and can't open those ports...
Any other ideas?
Ask your admin
Hmm...
I think then you have to ask aour admin...
Frank
try this
I had the same problem
you can try this
http://www.mobilitysite.com/boards/activesync/137666-fix-unknown-error-0x80072f78.html
How can I use my Polaris like USB modem to connect Notebook on internet.
Is there some application or something like that?
Thanks.
try this one
on your device, go to start menu > programs > internet sharing
choose which connection you want to use (USB or BT) then press connect
if you choose USB, plug the USB cable to both PC and device immediately after connetion established.
if you choose BT (you have to make sure that your device have been paired to the computer), connect to your device through BT network access
in internet sharing mode, all activesync connection will be disconnected
there is a registry hack for windows to fix this issue, but normally the issue also effects syncing. But the bad news is that itsmore then likley that your network admin has locked down this type of access.
only IE keeps working via proxy.
Other 3rd party apps seem to prefer a direct connection ignorinng how windows settings are actually used to reach the Internet
I have exactly the same problem: IE can reach the Internet via the proxy in our work network and other apps like QuickGPS cannot.
Strangely enough this happens only with my HTC Touch cruise and does not happen with my Fujitsu Loox N560, which has exactly the same settings.
I have to note that I upgraded recently to WM 6.1 on the TC and that with WM6 it used to work
Any ideas
same problem for me... (qtek S200 & win 6.1)
Hi all
I recently purchased an unlocked Treo 750 with use on T-Mobile. This replaced my 700w on Verizon.
I have internet working fine, MMS reprogrammed and working. However I seem to be having problems with VPN on the phone itself.
If I tether the treo to my laptop and use it as my internet connection, I can initiate the VPN client on my laptop and all is fine.
The problem is the VPN on the phone itself when using trying to use applications directly on the phone requiring VPN (ie without the laptop). I configured it, it connects fine, however when trying to use IE or remote desktop it fails to connect.
I get a 503 error in IE on each url I try through the VPN. Makes me think it's trying to hit a proxy of some kind outside of the connection manager.
I've also tried using internet2.voicestream.com as opposed to the default wap.voicestream.com... both function identical and at same speeds. I have the total internet add-on data package.
Remote desktop fails with network not found... which kind of hints at a proxy also.
Note that I do not have any proxies set in the Connections manager, makes me think there is something hard coded.
I have checked the registry for the AutoEnable thing for proxies, but in WM6 this is already set to a value of 1.
Any advice is welcomed
If it is a PPTP VPN connection you are probably screwed, it is slowly emerging that there is a problem with the implementation of MPPE used in WM for PPTP VPN connections. I.e. VPN connects but NO traffic Tx/Rx.
Best bet, try and get your IT to setup the PIX to use L2TP/IPsec I have heard numerous reports that there are no problems with the implementation standard of that VPN connection in WM5/6/6.1.
Hi,
I have an HTC Fuze. Could someone recommend a WM application that has the same functionality as Psiloc Connect?
Psiloc Connect (from what I understand) manages your connections and automatically switches you between 3G/WiFi/GPRS etc based on the best type of available network.
Thanks,
Kurt
Hi
There are some firewall available. I already only only tried Airscanner Firewall and I didn't see the feature I need in it. I would like to been able to block the specific network adapter. GPRS/EDGE transfer is very expensive in my country and would like to block all traffic on "cellular line" network adapter and leave wlan network adapter untouched to use only it. Are there any good firewalls for WM? I find a solution to for my problem to set not using GPRS totally but rarely I would like to browse some page via GPRS so firewall with that option will be faster then unlocking GPRS in settings.
WM6.5 and HTC Touch2
Cheers
For this you do not need a firewall , tap start>>settings>>connections>>connections, and then tap the 'advanced' tab,, after that tap the 'select network' button, and then you know what to do.
Cheers
Edit:If you still want to use cellular connection occasionally, you can appoint a specific browser, set it to use the phone connection. For example, you can install opera mobile 9.7 & 10 two versions, they can coexist on the phone. while 9.7use wifi & 10version uses gsm/3g network.
Just install MoDaCo NoData and you can disable all connections using GPRS
Hello All,
XDAndroid 2.2.1 (fxr04)
After some trail and error I have CSipSimple app working as my voip wifi app on an HTC Touch Pro phone on my lan.
Problem: I can never get the phone to register to my LAN/server , remotely.
I have,of course tried all the extra 'proxy server',etc, settings.
I have two of these phones and they both register fine remotely using PortGo under WinMO so i know this is not firewall related.
I run into this same scenario quite a while back trying to use the native WinMo sipstack. It too, would work ok on lan but no wan. It appears the stack simply can not traverse nat correctly.Thus I had to use a thrid party(PortGo) app.
Note: I ONLY use this phone under wifi(I'm cheap).
Has anyone else gotten a reliable voip app for the Android phone?
Thank You,
Barry