I am using I-tech clip radio it support A2DP, AVRC with buit in FM radio receiver and sound quality is great.
But i am facing a problem -
My Wizard detects it as 1.Wireless Stereo and 2.hands free
After paring it plays music and handle call very well
Once i switch off BT on phone then again switch on to reconnect it connects only Hands Free part not Wireless Stereo - so music doesn't come on Hands free
If i start A2DP from Battery Status it transfers music but very poor sound quality and AVRC function.
I even tried Widcomm BT Stack but no help.
So after every switch on/off of BT i have to delete and pair it again with my phone.
Please help
I have same problem
rom TNT 273
genius bt-03i
sometimes it hepls when I turn my headphones off and on again and at bluetooth devices I tap and hold stylus on my phones and click set as wireless stereo, sometimes I have to unpair and pair again...
Solved
If i follow these steps it works -
OFF
1. switch off BT on phone
2. Switch off Handsfree
ON
3. Switch on Handsfree
4. Switch on BT on Phone in Connectable mode
5. After few seconds in BT config panel select & hold on listed handsfree set as wireless stereo
This process works very well
in my BT panel "Set as wireless stereo" stays grey after this procedure :-(
running tnt series pro on a g3 and trying to connect Jabra BT-320s
Related
Hey All,
I have a Diamond, and a cardo rider Q2 for my motorbike helmet. They pair up nicely for phone calls, but I cannot get music to stream to the helmet.
All other functions work fine. If I press a button on the phone the sound of the button comes through.
The annoying thing is that my friend has a N95 and it works just fine, so I know the headset is capable.
Is there some setting that I need to change? Or a download to fix this?
Any help would be appreciated. And please take it easy on me as I am not very capable with technology.
Thanks In advance
Adam
Adam,
Double click on the icon of the paired headphones on the bluetooth screen and make sure that Wireless Stereo is ticked.
The system is using two profiles- one for phone calls (headphones) and the other for music (Wireless Stereo). Yout helmet BT earphones should be able to switch in between as long as they are enabled.
CD
Hey CD, thanks, I tried that, but..
When I do that it only gives me the option of "hands free".
If I plug in my wired HTC head phones while maintaining the blue tooth connection to my helmet and play music the music comes through the wired headset, but when I try to voice activate an outgoing phone call the music changes from the wired headset to the bluetooth headset temporarily.
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
dave.ski said:
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
Click to expand...
Click to collapse
I have the same Jabra 320's... finally got them working as Wireless stereo pressing the main button again and again during pairing... I didn't know it was going to work - It was out of frustration!!!
I tried several times with my 320's (deleted, re-installed, tried different ways/software) all to no avail.
There is a software upgrade for the 320's on the Jabra site but you need a special usb connector to flash the unit.
In the end I picked up the newer BT3030 cheaply on e-bay and they were recognised straight away as Handsfree and stereo BT streaming.
Both the 320's and 3030's have the A2DP profile, so not sure why the don't see the 320's correctly?
So happily cycling to work again with the BT3030 and listening to BT stereo.
In order for you to do what you want your headset must support A2DP Bluetooth profile (and even if it does it may not work!). That is the profile needed to send stereo music from the HTC. Most handsfree units do not do that - they just support headset and handset Bluetooth profiles.
There is a utility available called BTMusic that can be downloaded free from here. This will allow music to be sent using the headset or handset Bluetooth profiles, and it worked with my Parrot car kit, so it may work for you. The problem is that it is mono only and the quality of the sound is not brilliant - after all these profiles were never designed for that.
So the alternative is to find a new headset that supports both handsfree and A2DP profiles and works with both.
umm yea... i went through EVERY SINGLE thread this thing has. none of the programs work for me period.
Was wondering how i can set my device to auto-connect with my Pioneer stereo.
This is the initial problem:
I pair my Raphael with my Pioneer car stereo - When I initially pair the BT to my stereo i get hands free and wireless stereo, however after this when my phone connects it only connects to the hands free. IT WILL NOT CONNECT AGAIN UNLESS THE PARTNERSHIP IS DELETED AND RE-ADDED - it will not pair if i click "set as wireless stereo" in the bluetooth settings of the phone, or when I click play on my car stereo.
I want when the phone so that when it comes into range of my stereo that it auto connects to both A2DP and hands free, I also want this to be automatic, ie not using A2DPToggle.
Any help would be appriciated
Thanks in advance,
Kris Bennett
a2dp problem
same problem here... i have to delete the device everytime,refresh, search and reconnect to use the a2dp function. handsfree for calling mobile works fine..
need some help.. may be a little tweak in the bluetooth function..
thanks
Same here most times - although occasionally it works OK... very annoying!
You might check your Pioneer manual. I have a Sony BT CD player and I have to push the number 6 on the head unit to reconnect it everytime I get in my car. I wish it automatically connected but this is quite easy for me. I would have never figured it out if I didn't read the manual.
I have checked the manuals and there is no mention of needing to push anything on the deck. I want my phone to auto connect - i know that this must be possible to do when it connects with my hands free as a2dp Toggle does it, but you have to press a button on the prog that connects it , I want it to be automatic
yeah, ive always had that problem with my pioneer headunit
Same problem for my TP with Jabra Speakerphone. any update?
i00 said:
Was wondering how i can set my device to auto-connect with my Pioneer stereo.
This is the initial problem:
I pair my Raphael with my Pioneer car stereo - When I initially pair the BT to my stereo i get hands free and wireless stereo, however after this when my phone connects it only connects to the hands free. IT WILL NOT CONNECT AGAIN UNLESS THE PARTNERSHIP IS DELETED AND RE-ADDED - it will not pair if i click "set as wireless stereo" in the bluetooth settings of the phone, or when I click play on my car stereo.
I want when the phone so that when it comes into range of my stereo that it auto connects to both A2DP and hands free, I also want this to be automatic, ie not using A2DPToggle.
Any help would be appriciated
Thanks in advance,
Kris Bennett
Click to expand...
Click to collapse
Goto your Bluetooth settings and enable "Make this device visible to other devices" , should solve your problem. I also have a Pioneer BT headunit in my car, and that corrected it.
I currently have a program called cicleBT that turns BT on and off with the push of a button (without having to navigate thru to the comm manager)...
Would it be hard to make a program that did this and then once bluetooth was on it would automatically make my first BT device "set as wireless stereo"??
i find it a pain that everytime i want to hook up my stereo headphones i have to go into the bluetooth settings and set it as wireless stereo after turning on device visible to other devices...
What would i need to be able to do to do this?
thanks
This isn't the software your asking for, but once your headphones have established the headset link, try pressing the play button on them. Works on all bluetooth headphones I've used.
I've search for over two hours but it seems ive learned alot but i still cant find my problem the problem is that every time i connect to my car kit windows media starts working but then after i turn off my car and then turn it back on the music comes out of phone. So how can i make it play again on my stereo without reconnecting. i have elite rc3 rom and it has a2dp included.
I don't have the same exact problem you do, but I have a stereo bluetooth headset (Jabra BT8010 [awesome headset btw]) and if you don't wait for your bt to connect to your phone first before you fire up WMP OR connect while WMP is playing, it will freak out and do wierd stuff. For me it would either ignore my connection and play out the phone's speaker or play in my headset in mono mode in horrifyingly bad quality.
I hope that helps
Hi!
the radio in my car doesn't have bluetooth (BT) so I need to use a BT audio adapter that I plug in the audio jack. THis would be the first device that I want to connect with my Honor 8. Because I don't want to switch tracks over the phone display, I would like to connect a bluetooth remote too that is attached to the steering wheel. FInally I would like to use a BT headset to make/answer calls while driving.
So there would be 3 BT devices that need to be connected to my phone at the same time...
Have any of you tried this? Should / can this work?
Thanks for your thoughts!
Greetz Ric
You can do that if you use 3 different protocol.
1. BT headset-phone audio
2.Bt aux-media audio(this give music audio and dedicated music control)
3. BT remote-have to be some kind of input type.
My setup for proof of concept using BT speaker, BT headset and BT remote(in pic)
I haven't had any luck connecting to my car's Bluetooth with emui 5.1 so I wish you the best of luck bud! I'm back to the aux cord life until something gets fixed. Please keep us posted on how things work out for you.