I've search for over two hours but it seems ive learned alot but i still cant find my problem the problem is that every time i connect to my car kit windows media starts working but then after i turn off my car and then turn it back on the music comes out of phone. So how can i make it play again on my stereo without reconnecting. i have elite rc3 rom and it has a2dp included.
I don't have the same exact problem you do, but I have a stereo bluetooth headset (Jabra BT8010 [awesome headset btw]) and if you don't wait for your bt to connect to your phone first before you fire up WMP OR connect while WMP is playing, it will freak out and do wierd stuff. For me it would either ignore my connection and play out the phone's speaker or play in my headset in mono mode in horrifyingly bad quality.
I hope that helps
Related
I am looking for a quick and easy way to integrate my trinity with my car.
Currently I have have a generic car mount with charger. However, I find that TomTom and telephone calls over the speakers are too quiet.
I was thinking of installing a Parrot MK6000 in my car as a method to stream audio from my trinity to the car stereo whilst also acting as a car kit for hands free use while driving. Has anybody had any experience with wiring up this kit? is it easy for a moderate level electronics users (able to solder wires proficiently etc.) to wire up?
Alternatively does anybody know of other solutions to integrate the trinity with the car stereo?
Hello:
I installed this hands free in my car, and it works really fine as a hands free. The audio streaming works well too, but the sound is quite methalic. With tomtom, there is a delay in the sound, the first word it says, for example "...Turn on the left in...." you listen "...urn on the left in ..." and it hanpens allways when tomtom starts to talk.
My OS version is wm5 and I read that wm6 solves this problem.
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
stormyb said:
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
Click to expand...
Click to collapse
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
esackbauer said:
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
Click to expand...
Click to collapse
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
stormyb said:
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
Click to expand...
Click to collapse
Actually I bought the Sony because it supports A2DP. And with MortPlayer it works flawless when listening music. With activated Bluetooth Stereo (Headphone Symbol in top bar) Tomtom still uses the internal speaker.
Hey All,
I have a Diamond, and a cardo rider Q2 for my motorbike helmet. They pair up nicely for phone calls, but I cannot get music to stream to the helmet.
All other functions work fine. If I press a button on the phone the sound of the button comes through.
The annoying thing is that my friend has a N95 and it works just fine, so I know the headset is capable.
Is there some setting that I need to change? Or a download to fix this?
Any help would be appreciated. And please take it easy on me as I am not very capable with technology.
Thanks In advance
Adam
Adam,
Double click on the icon of the paired headphones on the bluetooth screen and make sure that Wireless Stereo is ticked.
The system is using two profiles- one for phone calls (headphones) and the other for music (Wireless Stereo). Yout helmet BT earphones should be able to switch in between as long as they are enabled.
CD
Hey CD, thanks, I tried that, but..
When I do that it only gives me the option of "hands free".
If I plug in my wired HTC head phones while maintaining the blue tooth connection to my helmet and play music the music comes through the wired headset, but when I try to voice activate an outgoing phone call the music changes from the wired headset to the bluetooth headset temporarily.
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
dave.ski said:
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
Click to expand...
Click to collapse
I have the same Jabra 320's... finally got them working as Wireless stereo pressing the main button again and again during pairing... I didn't know it was going to work - It was out of frustration!!!
I tried several times with my 320's (deleted, re-installed, tried different ways/software) all to no avail.
There is a software upgrade for the 320's on the Jabra site but you need a special usb connector to flash the unit.
In the end I picked up the newer BT3030 cheaply on e-bay and they were recognised straight away as Handsfree and stereo BT streaming.
Both the 320's and 3030's have the A2DP profile, so not sure why the don't see the 320's correctly?
So happily cycling to work again with the BT3030 and listening to BT stereo.
In order for you to do what you want your headset must support A2DP Bluetooth profile (and even if it does it may not work!). That is the profile needed to send stereo music from the HTC. Most handsfree units do not do that - they just support headset and handset Bluetooth profiles.
There is a utility available called BTMusic that can be downloaded free from here. This will allow music to be sent using the headset or handset Bluetooth profiles, and it worked with my Parrot car kit, so it may work for you. The problem is that it is mono only and the quality of the sound is not brilliant - after all these profiles were never designed for that.
So the alternative is to find a new headset that supports both handsfree and A2DP profiles and works with both.
umm yea... i went through EVERY SINGLE thread this thing has. none of the programs work for me period.
Hi,
Yesterday, I installed a new car stereo and after a lot of frustration installing it, I was happily surprised the A2DP worked by default, just paired my touch pro with my stereo, start playing in wmp and it comes through my stereo system. However during the day I started looking for another player to use (during my breaks of course ) and installed pocket music player bundle ( I don't know if it has anything to do with my problem, just trying to include as much info as I can ). In the evening I enabled bluetooth of my phone again, I think I also had the headphone logo, but when trying to play using pocket music player and wmp, it always just used the speaker of the phone and didn't seem to send anything through A2DP.
Any idea how this can be? Is there a setting somewhere to change what audio is used (A2DP/Speaker/ whatever...)?
TIA!
OK, this seems to have been quite stupid.
Haven't been in my car since, but same behaviour with my logitech a2dp bluetooth headset.
Going into bluetooth settings, "right click" on logi_stereoV01 and "instellen als draadloos stereo" (set-up as wireless stereo) did the trick, probably the same for my CAR--BT,sorry for the stupid post.
Although it would be nice if the touch pro would automatically set the detected bluetooth device as wireless stereo every time, just as it seems to do for setting it headset when in range while turning on the bluetooth.
Sorry for the strange sentences... it was a long day
same problem
i just bought a bluetooth receiver for the car.
it fits in the lighter place and transmits via FM to the car radio.
My htc connected staight away (no code required to me) with the new "car Kit" found, but whatever i try i always have the sound from the htc speaker...
How can i solve this?
Thanx in advace.
Hi, I own Asus P535.
After upgrading from WM6.0 to WM6.1 I have not been able to use my BT stereo headsets.
If I'll connect headphones like "High definition audio" and then i wannt play music from audio manager or WMP will start but then it will become choppy as if the connection is going on and off every second (like "sporadically data transfer").
Didn't have this issue with WM 6.0. I also noticed the elapsed time of the song in progress is also erratic.
When the BT stereo headsets are connected like "Handsfree" then they become disconnected in 2-10 second.
and next what i noticed:
Bt manager have something what control range of BT... (signal strength) this function doesn't work.. still show just proper even if i walk away..
and sometimes its possible to find the point when the music is playing normaly.. but every move with mobile or headphones interrupted playing.
(BT-PPC/PE 1.7.1 build 9807)
PS: with any other deviece this BT stereo headphones work correctly.
So, this is a weird one, and chances are none of you will ever experience it, but maybe you might know how to fix it.
I use a Moto Hint "earset" to listen to podcasts with Pocket Casts and audiobooks with Audible. When I get into the car, the car tries to pair with the phone, but since my car only has phone bluetooth and not audio bluetooth support, I don't bother disconnecting the Hint and plugging in an audio cable unless I'm going further than a few minutes.
But whenever the car tries to connect to the phone, the audio stops. ONLY if I'm using Pocket Casts! And ONLY with the Moto Hint! Audible works fine. My Plantronics headset works fine. Waze works fine.
I've contacted Pocket Casts as well, but I don't expect them to treat this as a red ball