Hi
Recently i bricked my treo 750 branded ATT trying to change the ATT ROM to the SPANISH GENERIC ROM. I bought in ebay a new palm treo 750 ATT unlocked but i need the rom in spanish. So here is the question, if the phone is ATT Rom, I can change to generic spanish rom without problem? Is 100% secure this procedure?
In the palm official site says: 2.25 updater "Note: This download is AT&T Treo 750 device specific and is not compatible with any other device."
I did the procedure with the generic rom in the past and the result was a broken/junk phone.
Thanks.
Related
How can I tell if my phone is cid-locked, I would really like to change the ROM without the risk of bricking it. Has anyone one tried lokiwiz to cidunlock their phone? any advice would be appreciated. BTW I bought the phone from gray market in Hong Kong and is Vodafone branded, do you think it would be locked?
It came preloaded with Dopod Rom, but I don't like it that much. Also what is the best radio rom, the dopod radio rom is a bit weak.
IPL 2.15.0001
SPL 2.15.0001
Rom vs: 2.15.13.27 WWE
Radio: 02.19.21
Protocol version: 4.1.13.09
Ext ROM: 2.15.13.21
Thanks
locked
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
kenxu said:
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
Click to expand...
Click to collapse
so should I try to flash a rom and see what happens? if it goes through without an error it is cid unlocked? if an error pops up it is locked? Should I try this or should I avoid the risks? Any ROM suggestions? Qtek maybe?
Since your phone is G4 chip, i'm pretty sure you are CID locked. Dont worry about the CID locking for now, GOOD ROMS outthere been using different programs to get around CID locking problem. I suggest you can start with PDAMobiz rom from the other thread. REMEMBER USE G4 program not G3 or other programs. or look for any rom that has NoVender CID in the name.
MDA VARIO II with Dopod WM6
I recently bought Tmobile MDA Vario ii with Dopod Wm6. When it boots it shows dopod sign so I think it is dopod. The ROM is 3.54.707.3.
I want to upgrade to Wm6.1 but Tmobile has only official 3.60.xx rom presently available for download. Can I directly flash any Hermis compatible ROM on MDA Vario II.?
Since it has Dopod WM6 the CID lock must have been diabled I suppose. Am I right? and should I directly flash any HERMIS official or extended ROM? what are your suggestions Thanks
Hemant
I don't know enough about the Hermes and flashing to be certain, but I think you'll need to HardSPL (which bypasses bootloader CID checks) before flashing a ROM.
Take a look at the Hermes sub fora before doing anything though...
i'm trying to upgrade a second hand bought qtek s100 (presumably a magician). i hoped it would be a piece of cake, being a qtek device (thus sim and cid lock free). the simlock part is correct, any sim will work. but the cid lock free part does not hold. i tried several rom upgrades from the shipped rom section on the xda server:
nl113 rom (i think this is the tmobile rom)
the uk wwe 112 rom
the wwe 112 rom
the wwe 113 rom
and so on.
i also tried the xda unlock tool, hoping that i made a mistake and that something was still locked. after running it, it told me that unlocking worked (but it was already simunlocked to begin with). but still afterwards, running any of the above roms still didn't work. still country error.
with all the roms i get an country 112 error. even with the original qtek roms? i tried both the uk and wwe rom (not quite sure if this is a native dutch s100 or an expansys (uk) s100). did not matter, both didn't work. never had so much problems with my mda vario.
current rom is radio version 1.05.00
protocol version 1337.39
rom version 1.06.00wwe
extromversion 1.06.154wwe
maybe someone can shed some light why my qtek s100 does not take any of the shipped qtek wwe roms?
many thanks for reading my thread (and hoping for your suggestions)
solved it. just needed to run the MaUpgradeUt_noID.exe. then it stated the current rom and so on, after which it gave an country error while putting it into bootloader menu. then i ran MaUpgradeUt_noID.exe again while the qtek was still in bootloader menu, now the summary sheet stated blank at the rom version and so on. now it was able to upgrade correctly. for those like me who have the same problem, just run MaUpgradeUt_noID.exe twice and immediately after the first attempt!
Hi Community,
my mda vario III (HTC Kaiser) is an waranty case and i badly need the original rom incl all, this one in the forum is only the OS without radio spl and so on.
best regards
HT
I also needed it, bust just installed the OS and a working Radio.
T-Mobile does not even care what is installed, i guess they don't even startup the device but send it straight back to HTC. I switched about 20 T-Mobile HTC Devices and it worked everytime to just install the OS and a working Radio.
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
DaveShaw said:
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
Click to expand...
Click to collapse
thats teh problem i dont know them :-(
Ah, Just have to see if anyone knows the OEM SPL and Radio versions.
Does it have to be WM6 or Wm6.1 Versoin, or are you not bothered. I don't think anyone will care so long as it is a T Mob stock version.
Ta
Dave
WM 6.1 T-Mobile German
You can download the latest German ROM from the T-Mobile website
http://www.t-mobile.de/fremdcontent/1,2790,123254,00.html
I bought my Treo 750 through AT&T right after it came out. I upgraded to the official WM 6.0 firmware a long time ago. I also called AT&T who gave me a code to unlock the phone so I can use it with my new T-Mobile SIM.
I want to upgrade to 6.1. Since I had AT&T give me a code to unlock my phone (I'm currently using my 750 on T-Mobile now), do I still have to use the Cheetah unlock utility? If I flash my radio to the 1.54.07 version, will it give me better coverage or reception with T-Mobile? Do I have to flash the radio to use 6.1?
Thanks...
The code just unlocks your phone for a different SIM card. I would recommend using this tutorial to get Hard-SPL so you can use any ROM you want. http://forum.xda-developers.com/showthread.php?t=511763
I bought some Rogers Palm Treo 750 BS phone from ebay and would like to set it up with AT&T OS & Firmware or whatever. How do I convert my Rogers phone to AT&T? I tried the WM6 for ATT update and it said, "Unsupported Service" when trying to update it? Please help I don't want "Rogers" or whatever it is. Please help!!
P.S. - I can use my ATT sim card and it works, but just want to use ATT's software
Unlock using Hard SPL and you can flash any AT&T (or generic) ROM you like using the SD card method.