Slide Action On Raphael?? - Touch Pro, Fuze General

Any one try slide action on raphael!
I tried it but with no luck
Edit: the link to program : http://puna.net.nz/wm6/

who know what the registry control slide out and slide in HW Keyboard on Raphael ?
sorry for my bad English!!

just curious why you would want to answer your phone with the slide? I get angry when i have it open and it rings.

I want to run programs (SMS or Email....) when slide out H/W keyboard.

a very interesting application would be to assign an "empty SIP" when you slide open the keyboard (so that nothing will pop up when you need to enter text) and assign the normal SIP back when you slide it off

NLS said:
a very interesting application would be to assign an "empty SIP" when you slide open the keyboard (so that nothing will pop up when you need to enter text) and assign the normal SIP back when you slide it off
Click to expand...
Click to collapse
Great Idea ! i need too

littlerain said:
Great Idea ! i need too
Click to expand...
Click to collapse
I'll put 5 bucks for this!

Related

HTC Touch Keyboard

Anyone knows how to remove this black banner
When i type a recipientname i only get one name and this black banner
also with the message i type
disable xt9 and word suggestion
I did disabled the word completion, bud where to complete disable te xt9 ?
input methode => touch keyboard => i remove the checkbox there
Weird thing is, it doesn't show up every time you use the keyboard. In one screen it does and in the other screen it doesn't (or I'm blind).
The settings you changed should work I think.. lemme see:
start -> settings -> input -> *select 'Touch keyboard' from list* -> options -> XT9 settings.
In the XT9 settings you can turn off word completion etc.
However, I'm not sure if that also turns it off for the normal keyboard. I would assume it does, but you know what they say about assumptions eh
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Try this. Will Disable xt9
Works great thanks
I have exactly the opposite problem - Word Completion doesn't work at all even though I set ip up several times in the "Input" menu (in "Settings").
Any suggestions??
Thanks.
John_A said:
Try this. Will Disable xt9
Click to expand...
Click to collapse
Hi Im new here... been wanting to disable the XT9 input from htc touch. Will the attached above work on htc touch 2nd gen? thanks!
Blackfire said:
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Click to expand...
Click to collapse
Does that also disable T9 for the Touch Keyboard and Keypad?
Hi, I tried this CAB file and it works for the DUAL. May be you guys can give it a try. I got it from the HTC website. Good Luck!
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Swidge said:
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Click to expand...
Click to collapse
I would like to know this aswell, I become very fond of this on my Orbit 1 (artemis) and liked that it learned words that you used frequently.
Exactly, I had the Orbit 1 and have now upgraded to the Orbit 2. The way it learned words was great, but it didn't interfere with what you were typing. I'd rather it assumed I was correct and let me choose when to go with it's suggestion.
Ah ha! I have managed to rid myself of the XT9 and get the nice old native pocket pc word suggestion back!
I installed PocketCM Keyboard. That's it.
As I was typing on the new keybaord I noticed word suggestions coming up as well as the PocketCM Keyboard suggestions. I then swithced back to the standard keybaord and the classic word suggestion was back! I went into word suggestion options and changed it to my favourite settings and hey presto, it's working as good as the old one was. It also gives me the nice standard list of contacts when typing a name into my SMS 'to' field. Fantastic.
I don't know if it was a fluke or if it would happen every time you install PocketCM Keyboard, try it out. I don't know if you can get the XT9 back though, and the XT9 doesn't work for the touch keyaord and keypad now either rendering them practically useless, so be warned.
I also haven't reset the phone since this discovery so i don't know if it's permanent, but, crossed fingers...
Swidge
Blackfire said:
When i type a recipientname i only get one name and this black banner
Click to expand...
Click to collapse
You can scroll through the available recipients at this time by using the scroll wheel.
How I can completely swich off Touch keyboard and Touch keypad?
Henry100 said:
How I can completely swich off Touch keyboard and Touch keypad?
Click to expand...
Click to collapse
I don't know of any way to switch off the touch keybaord and keypad, but you can switch to another keyboard easily enough. If it's the black bar with predictive text in it you can switch it off pressing the XT9/ABC button on the touch keyboard, then using the keyboard of your choice. However this does not replace the XT9 predictive tet with the old style word prediction. The only way I found to do that was to install PCM Keyboard. I don't know why that reactivated the old style word prediction but it did.
Also, in addition to my previous post, i have reset my phone a number of times and the old style word predition has stayed. It seems to be a permanent solution, even if i don't know why it works.
I hope that helped.
Swidge
Thanks Swidge. You are awesome!
noooo....
i have the reverse matter
i want to display that black banner....but the version of HTC Keypad+Keyboard I've installed won't do that....
arggggg...
someone can suggest me an htc keypad+keyboard cab with this black banner???
plese i need it

How to get rid of "word completion" in SMS ?

I thought I turned all T9 and word completion off everywhere I found, but still when writing SMS I see this bar at bottom of the screen echoing my typing. It also has + sign on right.
So this is T9 right? How the hell do I get rid of it?
Hi Taajuus,
I have a 'T9' printed on the SPACE key of the slide out keyboard, you can reach through the 'FN' key.
So in SMS typing mode with the slide out Keyboard, press FN - Space, a pop up menu appears where you can configure T9 settings.
Hope that helps
T.
There should be a slider on the actual on-screen keyboard itself to deselect T9. Give that a shot.
Yes! That did the trick, thank you!
Still there was no option to simple tick off T9, but i chose ABC and my problem was solved
torklemm said:
Hi Taajuus,
I have a 'T9' printed on the SPACE key of the slide out keyboard, you can reach through the 'FN' key.
So in SMS typing mode with the slide out Keyboard, press FN - Space, a pop up menu appears where you can configure T9 settings.
Hope that helps
T.
Click to expand...
Click to collapse
You are really mothers little helper!
I have been trying for days to get rid of this green &*^%$#. And now its gone thanks to you!
And I consider myselve a power user. HAHAHA.
NOT!
Huib
Thanks a lot as well!
Brilliant this has been annoying me too... as usual a simple answer to the most annoying problems...

Texting Problem......

When ever I am starting to text my Fuze will go to the same screen as if you slid open the keyboard(email,message,favorites,web search,appointment,tasks,note,and contact) description of the screen. And sometimes it will also got to contacts or it will go to my keypad to my phone.....I am getting a little frustrated does anyone have any answers????? Help me!!!
You're in the wrong forum here guy; the Fuze is the Touch Pro, not the Touch Diamond.
thread moved
hope this helps
I have the same issue.. It seems like when ever I get a txt and push reply and the slide the keyboard out once I start typing it goes to the phone dial pad menu
This has happened to me a few times. It only happens when I slide the keyboard open before the text message reply screen is fully loaded. If I let the screen completely load and then slide the keyboard and start typing I have no problems. So just give it a couple of seconds before sliding the phone open. Hope this helps!
I'm pretty sure I GOT IT!!!!!
hondaguyjoe said:
I have the same issue.. It seems like when ever I get a txt and push reply and the slide the keyboard out once I start typing it goes to the phone dial pad menu
Click to expand...
Click to collapse
Honda I have a question for ya??? Do you have any form of voice command on your phone?????
I've got voice command disabled and I have this issue all the time. I basically have to start any text in portrait mode, wait a few seconds... and then slide open the keyboard and proceed as normal.
It sucks because if I'm looking at a text in TF3D and hit 'menu' and 'reply' then flip the keyboard open, I'll even have time to type a few letters before I'm looking at the stupid a$$ landscape TF3D screen. Then I have to hit 'Messages' and tap on the message to type my reply in the threaded view.
Would love to use a major function of my phone without having to hesitate!
tman1425 said:
This has happened to me a few times. It only happens when I slide the keyboard open before the text message reply screen is fully loaded. If I let the screen completely load and then slide the keyboard and start typing I have no problems. So just give it a couple of seconds before sliding the phone open. Hope this helps!
Click to expand...
Click to collapse
That's the way I've been doing it on my Sprint TPro. It's become second nature now so I don't even have to think about it any more.
Yep.
KCMatt said:
I've got voice command disabled and I have this issue all the time. I basically have to start any text in portrait mode, wait a few seconds... and then slide open the keyboard and proceed as normal.
It sucks because if I'm looking at a text in TF3D and hit 'menu' and 'reply' then flip the keyboard open, I'll even have time to type a few letters before I'm looking at the stupid a$$ landscape TF3D screen. Then I have to hit 'Messages' and tap on the message to type my reply in the threaded view.
Would love to use a major function of my phone without having to hesitate!
Click to expand...
Click to collapse
FWIW, I have this exact same issue and find it pretty annoying. Guess ya just gotta wait a few seconds before sliding open the keyboard...

Kill SIP PopUp???

Anyone have a cab or reg edit to stop the sip keyboard to always pop up when u select a text field/box? Like when your using opera mobile, u touch the address bar, the sip keyboard automatically pops up. I always use the hardware keyboard (main reason for getting a fuze and not a diamond!) and still while in landscape the sip keyboard will still pop up.
I know on my tilt there was a way to set it so only when u are in landscape the sip keyboard wont automatically pop up while selecting a text field. The sip keyboard will only automatically pop up in portrait mode while selecting a text field. Anyone know how to set it up this way? Thanks!
deeznuts said:
Anyone have a cab or reg edit to stop the sip keyboard to always pop up when u select a text field/box? Like when your using opera mobile, u touch the address bar, the sip keyboard automatically pops up. I always use the hardware keyboard (main reason for getting a fuze and not a diamond!) and still while in landscape the sip keyboard will still pop up.
I know on my tilt there was a way to set it so only when u are in landscape the sip keyboard wont automatically pop up while selecting a text field. The sip keyboard will only automatically pop up in portrait mode while selecting a text field. Anyone know how to set it up this way? Thanks!
Click to expand...
Click to collapse
If you have Diamond Tweaks installed, there is a registry setting under the #20 Keyboard (SIP), 20.1 Automatic display (popup). Enabling that setting should keep the SIP keyboard from popping up when you select text fields, but it will not pop up when in portrait mode by default either. I don't remember the registry setting to disable the pop up for landscape mode only.
Dramacydle said:
If you have Diamond Tweaks installed, there is a registry setting under the #20 Keyboard (SIP), 20.1 Automatic display (popup). Enabling that setting should keep the SIP keyboard from popping up when you select text fields, but it will not pop up when in portrait mode by default either. I don't remember the registry setting to disable the pop up for landscape mode only.
Click to expand...
Click to collapse
Thanks! This will do for now at least. If somehow knows how to disable sip auto pop up in landscape while keeping it obviously in portrait that would be amazing! Anyone?
deeznuts said:
Thanks! This will do for now at least. If somehow knows how to disable sip auto pop up in landscape while keeping it obviously in portrait that would be amazing! Anyone?
Click to expand...
Click to collapse
HKCU\ControlPanel\Sip
"TurnOffAutoDeploy" value="1"
With Opera there is a different setting. Not sure what it is off the top of my head but if you search on the hacking section you will find it.
At0mAng said:
HKCU\ControlPanel\Sip
"TurnOffAutoDeploy" value="1"
With Opera there is a different setting. Not sure what it is off the top of my head but if you search on the hacking section you will find it.
Click to expand...
Click to collapse
Thanks, ill try this out too. The diamond config as mentioned above did totally nothing for it, if anything it made it worse. Im sure a reg edit like this will kill it though. I dont use opera mobile too much, just used it as an example. I mainly use opera mini in landscape so it can get annoying when typing in a text box and every time you open it the sip keyboard pops up.
deeznuts said:
Thanks, ill try this out too. The diamond config as mentioned above did totally nothing for it, if anything it made it worse. Im sure a reg edit like this will kill it though. I dont use opera mobile too much, just used it as an example. I mainly use opera mini in landscape so it can get annoying when typing in a text box and every time you open it the sip keyboard pops up.
Click to expand...
Click to collapse
Hi:
did you try the reg edit? Did it work?
At0mAng said:
With Opera there is a different setting. Not sure what it is off the top of my head but if you search on the hacking section you will find it.
Click to expand...
Click to collapse
Didn't find a solution for Opera. Although it is not the issue of the keyboard popping up when i touch a text box that bugs me, its more when a page is loading and the keyboard appears for no reason
I use nullkeyboard. yeah, it completely kills the sip for everything, but one can switch it back and forth similar to choosing type of input (transcriber, keyboard, letter recognizer, nullkeyboard)
euphoria47 said:
Didn't find a solution for Opera. Although it is not the issue of the keyboard popping up when i touch a text box that bugs me, its more when a page is loading and the keyboard appears for no reason
Click to expand...
Click to collapse
I think it has to do with flashlite 3.1... As soon as I installed it on my phone, Opera began doing the same thing. As soon I touch a flash object, the keyboard will pop up. Very annoying but I've learned to deal with it.
I am still looking for a fix for Opera.
deeznuts said:
Anyone have a cab or reg edit to stop the sip keyboard to always pop up when u select a text field/box? I always use the hardware keyboard (main reason for getting a fuze and not a diamond!) and still while in landscape the sip keyboard will still pop up.
Click to expand...
Click to collapse
You can try Mobilnaut SYM
http://forum.xda-developers.com/showthread.php?t=459253
The main purpose of this software is to be able to use the SYM key to add accents on letters, but in addition it will automatically hide the SIP keyboard when you open the hardware keyboard:
It's simple SIP, which means it will be shown as standard input method, but when you click on the icon, no keyboard will be shown. That's useful when you are using hardware keyboard and you are trying to type something, with this SIP no software keyboard will pop up and cover half of the screen. And it's automatically activated only in landscape, in portrait mode you can use your favorite software input method. This program will remember the input method you used before, and when you slide your keyboard back, this method will be set as active.
.
question on mobilnaut sym
raphaelcno said:
You can try Mobilnaut SYM
http://forum.xda-developers.com/showthread.php?t=459253
The main purpose of this software is to be able to use the SYM key to add accents on letters, but in addition it will automatically hide the SIP keyboard when you open the hardware keyboard:
It's simple SIP, which means it will be shown as standard input method, but when you click on the icon, no keyboard will be shown. That's useful when you are using hardware keyboard and you are trying to type something, with this SIP no software keyboard will pop up and cover half of the screen. And it's automatically activated only in landscape, in portrait mode you can use your favorite software input method. This program will remember the input method you used before, and when you slide your keyboard back, this method will be set as active.
.
Click to expand...
Click to collapse
I installed this one but since I have a FUZE keyboard, I don't have the SYM key where mobilnaut sym thinks it should be. Instead, my SYM is on FN+Space, and when I hit that, I get a pop up list with all the characters for me to pick.
I have no clue how to do it, but if we could have this app work with a key different to SYM it would work!
Hi all,
everytime I open a game like Tonyhawk Pro skater 2, or if i want to learn italian with rosetta stone software, always I see a bottom bar with the sip keyboard. For Tonyhawk its irritating cause i could see the game bigger, and for rosetta stone, it totally ****s up my layout.
I tried reg. edits. HKCU\ControlPanel\Sip
"TurnOffAutoDeploy" value="1"
Tried nullkeyboard program, even tried advanced config, but the lower bar is always there.
is there a way to open programs in full screen? or is there a way to totally kill my lower menubar for wm.6.5?

How to enable auto rotate Today screen & start menu!

Who can help me how to Today & Start menu can automatically rotate! thanks. i tried with uzeb Sense2.5_Landscape_V2 but not done. Sorry for my english
check 'TD2 tools'. on WM 6.5 with manila 2.1 it's working.
Manila 2.5 does not and will not support landscape. You need to use 2.1 for that.
romano19 said:
Who can help me how to Today & Start menu can automatically rotate! thanks. i tried with uzeb Sense2.5_Landscape_V2 but not done. Sorry for my english
Click to expand...
Click to collapse
I'm using changeScreen which does what I want most of the time.. though when I receive a call.. tha telephone needs a RESET after that; coze tha GUI is #%$&*^ due to;
'Portrait Only' = idiots behind a desk (not touching tha phone at all) iNVENT new things...though, if they only would look further than their nose is long.......
Ah, well IMHO Manzilla 'll grow up eventually.
Senax said:
I'm using changeScreen which does what I want most of the time.. though when I receive a call.. tha telephone needs a RESET after that; coze tha GUI is #%$&*^ due to;
'Portrait Only' = idiots behind a desk (not touching tha phone at all) iNVENT new things...though, if they only would look further than their nose is long.......
Ah, well IMHO Manzilla 'll grow up eventually.
Click to expand...
Click to collapse
use the gsm keyboard and map a key to toggle rotate, i have that function mapped to longpress home key. and it works fine
franklopez said:
use the gsm keyboard and map a key to toggle rotate, i have that function mapped to longpress home key. and it works fine
Click to expand...
Click to collapse
but when your home screen rotates, it's just a black background? (it is when i do that...) or did you somehow apply a background?
question
why does titanium not rotate on the topaz??
using R3 from Dutty
Thanks
Jon

Categories

Resources