I thought I turned all T9 and word completion off everywhere I found, but still when writing SMS I see this bar at bottom of the screen echoing my typing. It also has + sign on right.
So this is T9 right? How the hell do I get rid of it?
Hi Taajuus,
I have a 'T9' printed on the SPACE key of the slide out keyboard, you can reach through the 'FN' key.
So in SMS typing mode with the slide out Keyboard, press FN - Space, a pop up menu appears where you can configure T9 settings.
Hope that helps
T.
There should be a slider on the actual on-screen keyboard itself to deselect T9. Give that a shot.
Yes! That did the trick, thank you!
Still there was no option to simple tick off T9, but i chose ABC and my problem was solved
torklemm said:
Hi Taajuus,
I have a 'T9' printed on the SPACE key of the slide out keyboard, you can reach through the 'FN' key.
So in SMS typing mode with the slide out Keyboard, press FN - Space, a pop up menu appears where you can configure T9 settings.
Hope that helps
T.
Click to expand...
Click to collapse
You are really mothers little helper!
I have been trying for days to get rid of this green &*^%$#. And now its gone thanks to you!
And I consider myselve a power user. HAHAHA.
NOT!
Huib
Thanks a lot as well!
Brilliant this has been annoying me too... as usual a simple answer to the most annoying problems...
Related
I have deselected it under settings / input. But it still tries to fill in bloody words for me when i am using a keyboard with all the keys i need! What the hell is it trying to do? I find it physically impossible to type anything without it constantly putting in random words!!! AHHH!!!!
Ok. I'm ok. Any ideas?
Haha no clue, but it does get annoying. I'll keep an eye on this thread and look through the user manual to see if I find anything.
Open the on-screen keyboard, tap the little arrow next to it then select "Touch Input Settings"
Clear the tick for Spell Correction and your problem should be solved
I've just been pressing FN + Space, and choosing "ABC" from the menu.
Open the on-screen keyboard, tap the little arrow next to it then select "Touch Input Settings"
Clear the tick for Spell Correction and your problem should be solved
Click to expand...
Click to collapse
Thanks! Perfect.
When I type something on my text messages there is a screw up.
EX: If I text "i am going to store" and i dont hit space after store it sends the message but keeps the "store" in the message and if i hit send it will send "store" again by itself... I have to hit space since it recommends something and unless i hit the word it wont go away...
any suggestions?
Adding puntuation afterwards should clear it up, or tapping on the word, or maybe even hitting enter (although I don't know if that works!)
l3v5y said:
Adding puntuation afterwards should clear it up, or tapping on the word, or maybe even hitting enter (although I don't know if that works!)
Click to expand...
Click to collapse
Thanks for the advice.
When I want to text and its quick I dont always use proper punctuation.
I really hope this windows device works out :/
Turn off word completion / suggestion ?
GlobalM3 said:
When I type something on my text messages there is a screw up.
EX: If I text "i am going to store" and i dont hit space after store it sends the message but keeps the "store" in the message and if i hit send it will send "store" again by itself... I have to hit space since it recommends something and unless i hit the word it wont go away...
any suggestions?
Click to expand...
Click to collapse
If this is what I think it is, bring up one of the HTC keyboards and turn the switch on the ABC/T9 button onto ABC. That should disable it.
Yes, it is the most idiotic typing "aid" ever invented.
Turned off auto complete and auto suggest and still doesnt work!!! Did a soft reset! This is so stupid!
I will try the T9 thing.
T9 WORKED!!!
thank heaven!!
thanks allot guys
this has been driving me mad. i tried turning off word completion etc and that didnt help but this seems to have, thanks
yes it definitely fixed it for me. Great that was driving me mad.
Yes Kill xT9 Or Hit a Space at the end of every text.
GlobalM3 said:
Turned off auto complete and auto suggest and still doesnt work!!! Did a soft reset! This is so stupid! I will try the T9 thing.
Click to expand...
Click to collapse
Turning off T9 did not help at all. I still get the black line at the bottom of the screen. The f*#$%#% thing still wants to suggest some very useful words for me! Any other ideas?
Did you follow the steps?
When you start typing a new sms bring out the virtual onscreen keyboard, press the arrow and choose Full QWERTY. In full QWERTY mode you should have a little button on the bottom left of the screen with "ABC T9" written on it. Press it and let the magic work.
Now press fn + Space and a menu appears. Check that it is indeed in ABC mode. If you want to be on the safe side go also into "T9 Settings" (on that menu) and kill (untick) everything. Or at least that's what I did.
Excellent, thanks. The black bottom bar from SMS editing was very annoying. Now it's gone, thanks.
New SMS message, FN+ Space and then check ABC.
Thx!
Thx! You were right. In fact FN + Space then choosing ABC instead of English really does work. That #$%#$% annoying black thing disappeared! Thx!
mr_Ray said:
If this is what I think it is, bring up one of the HTC keyboards and turn the switch on the ABC/T9 button onto ABC. That should disable it.
Yes, it is the most idiotic typing "aid" ever invented.
Click to expand...
Click to collapse
Knew I'd find the answer to my problem here on XDA-devs! Just did a HR and somehow the ABC/T9 slider got into the T9 setting, causing all types of problems when typing. Thanks for the tip and now I'll know for next time!!!
i would actually like that, how do i get my phone to do that? i can make it happed when i switch from ABC to T9, but after sometime it switches back to ABS
I've disabled all of the auto-correct and suggestion SIP options on the TP and that works great, HOWEVER (heh, heh)...
Is there any way to turn off that annoying "what-you're-typing-preview" that always appears on-screen as you type? It is such a waste of screen real estate.
Do you know what I mean? I'll explain...
For example:
Code:
PREVIEW STYLE 1
1. Start a new text message.
2. Pop out your physical keyboard
3. Start typing!
You will see what you type appear in a little "preview window" at the bottom of your screen.
Now here's the REALLY annoying one...
Code:
PREVIEW STYLE 2
1. Open an existing SMS message (threaded view)
2. Pop out your physical keyboard
3. Start typing...
You will see the preview appear *above* your text this time. Even MORE annoying since it's taking up real estate in the typing area this time around.
I've been scrounging for a solution to this and really hope one exists.
Thanks for everything, guys!
press ctrl + space and choose abc
Thank-you VERY MUCH, Brendo!
I thought that I had already done this but I realize now that it was probably in my dreams.
(YES -- I dream about my TP -- don't lie -- YOU DO, TOO!!!).
Lol.
Take care.
Hi Guys, probably very silly of me, but 'choose abc'. Do we have a 'abc' button? I can't seem to find out what you mean with this. Also pressing cntrl + space and typing abc does nothing (obviously). Help me. I also find the typing preview window quite annoying, especially since I have been so happy to be able to turn the auto correct options off.
It can be found on the SIP - pop up keyboard, providing you have "full keyboard", phone keyboard etc selected and not the windows default keyboard. You will see a button marked ABC->T9. Make sure T9 is not selected.
Gee thnx ardsar, this was clear and worked. Indeed I had to change the layout of my pop up keyboard, as I hardly ever use it and had it in the default keyboard mode.
THANK YOU, THANK YOU, THANK YOU (yes, I'm shouting )
If there was anything that pissed me off on this phone, it was the goddamn useless preview!
Why do they expect that you're a retard, if you bought HTC phone? I thought these phones were for smart people
That's kool that it will take the dialog away but while I'm in programs it still types the letters in the background and causes them to skip. Is there any way to disable the typing of keys in the background while still reading the keystrokes. Let's say I'm using PocketNES while I'm in the game it reads the hardware keyboard as typing letters when I'm not trying to type any message. I would just like to use the letters as buttons instead. Hopefully someone has found a solution to the problem!
Hey fellow XDA-ers.
I hope that in this thread we can unite in finding a solution for the annoying t9 input mehod, without breaking the hardware keyboard.
What's the problem:
I want to get rid of the annoying black t9 input and autocomplete bar, and use the standard WM6.1 version.
What anoys me the most is when you type an address for sending text, you start by typing first name of for instance friends who share a first name, but have different last names, , as soon as you hit space for the lastname, the person with the first name that's on top of the list gets selected..ARG
I also hate the lag it introduces.
So getting rid of the black ezinput part of the keyboard.
This can be done by replacing the eT9 values in your registry at the layout to COMP (et9IME replace by compIME and so on) and this works for soft keyboard.
However, this "fix" breaks some stuff in your hardware keyboard (the SYM key for instance stops working, also you cannot get the euro sign or the pund sign by pressing fn E or fn W)
I of course want the best of both worlds, and especially miss the sym button for getting a "\" whilst typing in shortcuts
So, I have tried so much, but haven't found a solution yet.
Does anybody know how to get this "best of both worlds" option?
Does opening up the on-screen keyboard and hitting the T9 --> ABC switch help?
nope
It doesn't use autocomplete then when typing text, but you still get the black bar at the bottom whilst entering an address, and the space-issue (filling in word after space) is introduced.
I just want the behaviour as when eT9 replaced by comp (ei. you get a couple of suggestion in your screen in light grey boxes, in stead of on bottom bar in black) but with FULL use of my hardware keyboard.
I want to do this without installing all kinds of secondary software that slows my device down, but want to solve it at the root.
Hope I am explaining the problem clearly
But thanks for the reply..
Maybe we can figure it out..
known problem
I've done the t9 compIME registry change and to me, is a must. That black bar was SO annoying and decreased effectiveness.
I have noticed the hardware keyboard does get screwy after doing this.
Using Da_G's roms, he has solved most of the problems in some of his earlier roms. I think the only problem I have currently is a non-working "cent" sign (FN+_). I'll test this again after I flash to his latest Rom.
I think he solves this by implementing SOME of the t9 files. I'll follow up with more accurate results.
player911 said:
I've done the t9 compIME registry change and to me, is a must. That black bar was SO annoying and decreased effectiveness.
I have noticed the hardware keyboard does get screwy after doing this.
Using Da_G's roms, he has solved most of the problems in some of his earlier roms. I think the only problem I have currently is a non-working "cent" sign (FN+_). I'll test this again after I flash to his latest Rom.
I think he solves this by implementing SOME of the t9 files. I'll follow up with more accurate results.
Click to expand...
Click to collapse
If that's the case, making a cab, or posting the necesary files to replace would be ideal.
Does your SYM key work?
sounds like a very good start
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
akky66 said:
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
Click to expand...
Click to collapse
Tnx for your input Steve.
I allready have that set up, but as you will find, it does not get rid of the black bar during txt msgs to field input, if you know what I mean.
It also gives lag on the hardware keyboard input comapred to the comp ide input method, which I find anoying.
What I really want is just the old wm input and auto complete feature without breaking my keyboard.
but as said before, thanks for the input.
This way we can narrow it down and hopefully make the problem easier to understand.
Ta...
tried editing sym files
Tried editing and replacing the txt files in windows directory,
eT9.Raphael.0409.kmap.txt and eT9DeadKeys.txt and renamint the et9 to comp, no luck.
Anybody any suggestions?
akky66 said:
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
Click to expand...
Click to collapse
I did that and the black bar is gone! No more annoying auto-capitalizing and duplicated words! Thanks a lot!
Not quite
Smaniac said:
I did that and the black bar is gone! No more annoying auto-capitalizing and duplicated words! Thanks a lot!
Click to expand...
Click to collapse
It get's rid of the black bar whilst typing a text, however whilst typing an adress in the to field, you will notice that you still get a black bar and proposed name in the bottom of your screen.
This is actually eT9 still running, and slowing down your input, trust me on this
The "old" way, you'd get the proposed names next to your to field, in a light grey box, and you could scroll through them and use the space bar without getting it to autocomplete.
I normally type the first few letters of the persons name, and then use the left and right arrow keys to gp through the matching contacts. That does the trick for me
indeed
GaZ said:
I normally type the first few letters of the persons name, and then use the left and right arrow keys to gp through the matching contacts. That does the trick for me
Click to expand...
Click to collapse
It does the trick and it is how I use it now.
It's just not the solution I am looking for.
I'm a bit wierd in that way, if I see it poping up, I know it's there and it just annoys me...
Don't you just love the way things were before
But thanks for the tip.
No luck here yet
I haven't had any luck yet, anybody else?
This issue is really starting to bug me
Any luck yet with removing the T9 Black bar? I am having this problem as well.
Me too!
i want the old way with the little grey box, it was so much better. It gave a number of people when you typed in a user name for sms and it also gave better autocomplete options.
Solve for all us
Try attached CAB guys from our famous Russian PDA professional. It's remove this bar completely.
yes it worked for me on Touch HD perfectly
Works
Igoran said:
Try attached CAB guys from our famous Russian PDA professional. It's remove this bar completely.
Click to expand...
Click to collapse
TY it completely rocks on Touch HD.
Does this just disable T9 on the hardware keyboard? AND, when entering a contact into sms or email you get the grey list like before?
What about T9 for soft keypad/boards? How does it function now?
I stumbled upon your thread while searching for "disable t9 hardware keyboard".
I have the same problem on my Kaiser... Installed ezinput keypad/board and now have that 'damn' black bar. I'm getting used to it like 'GaZ' but dont really like it...
<<<UPDATE: Only selected abc over t9. Black bar still there.>>>>
use different sip
im not sure if this help but wasnt this issue introduced with the diamond sip set? maybe using different sips might get rid of it. or maybe replacing the new eT9 and using the old wm6 t9 instead in wm6.1 roms. just a thought
Does anyone know of a tweak, hack or app that would do the following:
I want to be able to switch more easily between Phone keypad entry with XT9 enabled and QWERTY in ABC mode.
What I mean is that when you come across a word not in the dictionary it’s pretty fiddly to change to ABC and then use your fingernail to call up the change input method screen to QWERTY. I’d like to be able to hit the XT9/ABC toggle and have it automatically switch from Phone keypad to QWERTY at the same time. Another good use would be if you’re merrily typing away in XT9 phone keypad mode and hit the ‘+’ to add a new word to the dictionary – it would be cool if it changed momentarily to QWERTY to allow you to enter the word and then shifted back into XT9/Phone Keypad automatically when finished.
I know it sounds lazy, but I really think this would make the text input much more ergonomic.
Any ideas?
no-one? Seriously?
I wonder is this in the wrong forum??
*bumpety bump*
google nusipstylus.
that will do the trick.
When you pull out the stylus you can enter on a full keyboard and when you put the stylus back in you get the htc keyboard.
here it is...
Hi
Thanks a million for the response.
However, I've found that app made my device agonisingly slow.
In any case, I think this is somewhat of a retrograde step. I was actually after someone to mod the HTC keyboards to just allow a quick toggle between XT9 and ABC that would default back after you hit the space key.
I really appreciate you taking the time to send me the .cab, but I'm afraid it's not quite what I was looking for.