does somebody have SecureW2 working properly on his phone?
i really need it for my network on school, but unfortunately, when i start this program it is half off te screen, and i cant scroll.
with half of the settings this program doesn's work :s
thanks
i had the same prob, needed securew2 to log on at school (eduroam)
what i did was i used sphelper(u can download it for free), its a cursor which u can use to click on the screen and u can move the screen up, down, left and right it takes some time to get used to it, but it gets the job done.. Good luck
thanks, i goanna try.
Related
so heres a weird thing that happened last night. i was playing around with tornadopowercontrol and i accidently set cpu speed to ultra slow. it stayed workin for a few seconds and then turned off. got scared, i turn it back on, it loads to the main home screen, loads up tornadopowercontrol (had it in the startup mode -hidden) and then it turns off and reboots. Not sure why, maybe cause its still stuck in that low cpu speed? this continues to happen, not sure how to stop it.... any suggestions?
Try a hard reset! From the Wiki: "Turn off your phone, then press both soft keys next to D-Pad and power on device. After moment release both soft keys. On the black screen asking for confirmation press "green phone" button and wait couple minutes for phone to initialize"
Sync it and edit your Power_On.lnk inside \Windows\ and put it back to whatever speed you had it at,
I don't think he can get it to this point!
thanks a lot!!!!
I was just about to try the ultra slow thingy
prajith said:
thanks a lot!!!!
I was just about to try the ultra slow thingy
Click to expand...
Click to collapse
lol no problem ya couldn't sync it to reset it back to original settings. ultimately required a hard reset hope i have my stuff backed up somewhere! lol i tried puttin it to a lower settin cause i was just listening to music and didnt' think i needed it running at 252. but i guess 116mhz is much to low, anyone know wats probably the safest (and lowest) speed it can run at?
i had a similar problem but managed to solve it without hard reset. i powered up the phone with pc cable connected ... lucklly it was able to connect through ActiveSync before programs from startUp and i`ve managed to overwrite the file.
my vox works ok even with 140 as lower setting but SmartToolKit seems to lockup way too often ... right now i`m using 164 and i haven`t see a lockup in about a week or so.
264 seems to be the upper limit (damn rocket) , beyond that it start to act crazy.
lastOne said:
i had a similar problem but managed to solve it without hard reset. i powered up the phone with pc cable connected ... lucklly it was able to connect through ActiveSync before programs from startUp and i`ve managed to overwrite the file.
my vox works ok even with 140 as lower setting but SmartToolKit seems to lockup way too often ... right now i`m using 164 and i haven`t see a lockup in about a week or so.
264 seems to be the upper limit (damn rocket) , beyond that it start to act crazy.
Click to expand...
Click to collapse
is the 264 mhz stable? or does it lock up? anything with smartoolkit locks up i just turn it off nowadays
the touchscreen on my mogul is cracked; part of it works, but not all. i hard resetted it in advance of getting my replacement. i have another few days till it gets here and my align screen screen wont go away. any help or ideas?
Push harder? jk
No you can't get passed that screen as far as i know without being able to hit the dots (and within a reasonable distance of them or it will start over) The reason being. that until start up fully runs, it will reload your rom every time (and i don't think you can kill the "start up" until the rom is loaded. I know it is an exe program though because i have run into it before in my windows folder.
eh... im gonna die till i get one now. lol thank you.
haha, no prob
trekkiemogul said:
the touchscreen on my mogul is cracked; part of it works, but not all. i hard resetted it in advance of getting my replacement. i have another few days till it gets here and my align screen screen wont go away. any help or ideas?
Click to expand...
Click to collapse
When your unit boots up hook it up to your computer and browse your device from activesync. Go to /windows/startup and delete the welcome file. Soft reboot and you are past it!
Hi everybody!
I'm having problems with my Pocket PC.
It all begun a while ago, when a part of my screen stopped working (didn't respond to touches). So I did a hard reset. Then, it wouldn't pass the Align Screen procedure. So I made a file on the Pocket PC root folder called welcome.not - and it worked, the welcome screen was bypassed.
Now, however, everything on the screen is mirrored. Not the image on the screen but the response to my touches. So when I press the upper right corner with my stylus, it reacts in the lower left - and reverse, across the whole screen.
What I want now is of course a state like before the hard-reset. I can accept a part of the screen not working, but I want something at least to be useable.
I think this would be easily fixed by just running Align Screen, but that doesn't work - it gets stuck in a infinite loop.
Maybe there are some Align Screen "profiles" to place in the windows folder/registry?
I'm using a HP iPAQ 214 Enterprise.
Randor244
might it be a ROM problem?
Maybe, though I think the problem is that the screen is completely unaligned and therefore is totally wierd.
What I think I need is:
1. An application to browse the PPC registry from a desktop PC
2. Sceen align data to put in in the registry (I've read somewhere else that that data is stored in the registry)
Or, maybe I'm wrong
In case it is a rom problem, can I solve it easily in any way?
well to be honest, the first thing i'd do is switch a ROM... unless it's a ROM you got from XDA and is well-known..
if the rom switching doesn't work, i'd download a pda control app like MyMobiler or SOTI Pocket Controller to fix this. maybe you have hardware problems with your screen..
I don't know where the screen alignment data sits in the registry but i'm sure you can find it on this forum. if you manage to change and it still doesn't work... maybe replac ea screen? there's a marketplace section in which you might be able to buy spare parts.. and there are guide on dismantling so you can replace the screen yourself
well to be honest, the first thing i'd do is switch a ROM... unless it's a ROM you got from XDA and is well-known..
Click to expand...
Click to collapse
Well, I havn't got much knowledge on how to do these things... Could I get a brief explanation?
I know what ROM is and so on... but how to switch it... hmm...
I'm sorry, can't help you with that.. i'm not familiar with the iPaq... but I understand that you never switched a ROM so it's probably the original one.. and you shouldn't have a problem with it.
try aligning your screen using the registry.. if it doesn't work.. i'd go with replacing a screen.
Yeah, I would also like to align the screen using the registry - but how? I need to know some values to input, right? And as far as I know they need to be specific for my model
So how?
maybe you can contact HP and ask them?
hi there,
i was working yesterday and my phone was in my pocket and was squished against my keys! the screen is cracked... but it isn't, i think its the touch censor screen or something as i can see the screen fine just with a crack in the middle... anyway i cant use the screen to touch
i am using wm 6.5 and i accidentlly pressed the lock button in the start menu and cant seem to get passed the wm6.5 slide2unlock screen!
i try'd a soft reset but it is there as soon as it turns on
i dont want to hard reset because i would need to use the screen calibration (plus i havnt backed up my contacts and have some important messages!)
it is really frustrating i try'd deleting the files in the windows directory but it says it is read only and i cant delete it!
and im a bit broke and cant afford a new screen!
could someone please help
i would very much appreciate it
kind regards
Alex
alexsandros said:
hi there,
i was working yesterday and my phone was in my pocket and was squished against my keys! the screen is cracked... but it isn't, i think its the touch censor screen or something as i can see the screen fine just with a crack in the middle... anyway i cant use the screen to touch
i am using wm 6.5 and i accidentlly pressed the lock button in the start menu and cant seem to get passed the wm6.5 slide2unlock screen!
i try'd a soft reset but it is there as soon as it turns on
i dont want to hard reset because i would need to use the screen calibration (plus i havnt backed up my contacts and have some important messages!)
it is really frustrating i try'd deleting the files in the windows directory but it says it is read only and i cant delete it!
and im a bit broke and cant afford a new screen!
could someone please help
i would very much appreciate it
Alex
Click to expand...
Click to collapse
I'm no expert in this field, but have tried to sync the phone and unlock it from there? raspberry tru connect is an excellent program and if your d pad still works you should be able to install it and use the mouse cursor to do what you need to.
I have also heard of booting in safe mode, although I have no experience in it, but I'm sure if you check the wiki of your device you should find an answer.
Hope one of these help.
Just about right said:
I'm no expert in this field, but have tried to sync the phone and unlock it from there? raspberry tru connect is an excellent program and if your d pad still works you should be able to install it and use the mouse cursor to do what you need to.
I have also heard of booting in safe mode, although I have no experience in it, but I'm sure if you check the wiki of your device you should find an answer.
Hope one of these help.
Click to expand...
Click to collapse
m8 thank you very much that raspberry thing worked for me like a charm!
would this rasberry program work if i flash my phone with new rom?
like would it work on the screen calibration?! thanks!
alexsandros said:
would this rasberry program work if i flash my phone with new rom?
like would it work on the screen calibration?! thanks!
Click to expand...
Click to collapse
Not that I know of because of the installation needed on the device. If the ROM you are installing does not have the setup features and are already calibrated then you can install the program like before and be good to go.
I'm sorry, I know this isn't what you wanted to here.
Just about right said:
Not that I know of because of the installation needed on the device. If the ROM you are installing does not have the setup features and are already calibrated then you can install the program like before and be good to go.
I'm sorry, I know this isn't what you wanted to here.
Click to expand...
Click to collapse
would it be possible for you 2 attempt it when you next flash your rom? and pm me or reply to thread
because it is seriously bugging me knowing im stuck with this rom until i can buy a new screen
kind regards
alex
alexsandros said:
would it be possible for you 2 attempt it when you next flash your rom? and pm me or reply to thread
because it is seriously bugging me knowing im stuck with this rom until i can buy a new screen
kind regards
alex
Click to expand...
Click to collapse
Sure thing. I should be flashing this weekend if not sooner. Trying to get a few programs to play nice together and not having any luck.
I'll let you know when I do and we'll see if it works and go from there.
http://goatechno.blogspot.com/2008/12/windows-mobile-stuck-at-screen.html
is this what you guys need.
Hi, would be really glad to get some help to get by the align screen!
The display is a little scratchy but it works, now 2 questions:
1: is there a way to using the computer or somthing to get rid of the align screen
Had this problem once before after installing a new rom, but then it worked out after many tries, but now it seems impossible just keep hunting the cross
2: Can you change the plasic over the touch screen (i have a HTC touch diamond)
Tnx in advance /would like to try the now rom - http://forum.xda-developers.com/showthread.php?t=521941
Can you connect via active sync?
If so you can use MyMobiler to connect and click to align.
Or I also found this:
http://pdaphonehome.com/forums/sams...02003-skip-align-screen-after-hard-reset.html
not sure what it is, but it might help...
fnx for the fast reply, tried my mobiler and i see the screen on my computer but i cant use the mouse to align - still need to push on the screen on the mobile... and i cant get by the align screen, ill guess ill try the other link u had there! tnx again
Unplug the phone and just hit the power button off for a couple seconds and hit it back on.
If that doenst get you out of align screen just reboot the device and when it starts back up and gets stuck at align screen just plug it into your computer and wait till it syncs with active sync. Now use the computer to delete welcome.lnk from device memory/windows/startup folder. Unplug the phone and reboot the phone again.
Let me know if this helps you out.
Ryan
tnx, for the help, i used the program on the first link and it worked - guess deleting the welcome.lnk work aswell!!! Now to the second question, can you replace the scratched plastic? i cant use the upper right corner on the touchscreen, kinda annoing to not be able to press the x or ok botton there....
Tnx again
cant find windows folder when i connect it to the pc? program dont work anymore so i guess its only to delete the welcome.lnk left but cant find it on my device?`what to do, cant get pas align screen...
Hit back home or "hang up". If you cant figure out how to use your phone, frankly, replacing the screen is probably gonna be to difficult for you to deal with yourself. Take it to a repair shop or get a new one.
Nothing works... just keep hunting the cross on align screen, cant get past it using the program on the link, and not buy pressing power button on and off, tried every button on the phone aswell, and cant find windows folder when connecting to active sync!!! so any ideas would be apprechiated
make sure in the folder option onthe pc you allow the pc to see hidden files and folders
windows is a system folder and they really dont like people pising about with it
so just enabling the "show hidden files and folders" in the option should show the windows folder also you may run into and issue were you cant delete the file you need to as its prtected. to get round this you need to download total commander on ur phone then navigate to windows folder and delete the file
totalcommander will erase anything you want as itll get round the protection
Hi, tanks for all the help, but it starts to get really annoying.... tried everything you guys have told me, but nothing work Found the windows folder but i cant delete the welcome.lnk as you told me! cant install total commander because i cant get past align screen - what to do? tnx again
look for an program called everywan for the pc
its a bit like my mobiler but itll show you memort processes running on the phone all you have to do is quit the welcome head app then you can get into phone. then use total commander to delete the file
this will need to be done one everyhard reset