i found sometimes it is very hard to bring out the input selection menu by touching the small arrow on bottom of the screen... Not sure it is problem of my device or not. but as i said, when i need to change input method i have to touch the arrow several time to see the selection menu. so i'm wondering if there's a shortcut key for change input method?
yes i have the same confuse
why all the arrow button is so small in wm OS
iphone's touch button is big ,so i can use my hand easy
wm should learn iphone
Are you specifically talking about the unresponsiveness - lag when you hit that small button. Takes about 5 secs to bring the menu up? I heard there was a registry fix for it some where but never tried it. You can search for it.
If you are talking about the button being small and hard to hit, then I don't know how to help you there. Perhaps you can link a command to pop open that menu and then map that command to a hardware button? Do you switch SIPs a lot?
yes, it is the unresponse, it is frustrating...
i 'll search for the registry fix.
In that case here's one thread that mentions a registry fix for it:
http://forum.xda-developers.com/showthread.php?t=301433
Read through it, try it and post your results if it works or not. Note one user mentioned they had to HR, so backup just in case.
thank you hambola, it really works. that registry fix is like a magic
Related
All the new Roms for many of the phones here are streamlined for one handed use. Though there is one problem. One cannot change the sip mode unless she clicks on the tiny arrow next to the keyboard icon. This is really difficult with the size of my thumb, and taking into consideration the slugginess of my prophet's processor, the menu takes a second or two to open, during which I impatiently and accidentally press one or both the soft buttons
I tried a lot to find a macro recorder, or a way to assign a hard button to that little arrow but nothing. Does anybody know a way to change sip's easily?
Try Wisbar Advance. There's a feature that enable the autochanging of sip base on what program you are running. You won't even need to change sip forever if it's properly configured.
unluckily I just have different sip's for greek and english, so I would like to change on the fly, maybe several times during a message. So that does not seem very helpful, although I will sure give it a try. Thanx.
Hi there,
here's a question relating to the soft-keyboard:
I noticed that with some applications (e.g. PHM reg editor) when I want to punch in a value and hit the corresponding field the keyboard will pop up (which is perfect so far). Now, the keyboard sometimes hides the OK button which I'd have to hit to accept the changes but somehow I can't convince the keyboard to go back where it came from - there's no button to disable or change it (like the "12" button you sometimes see in the bottom).
What can I do to get rid of the keyboard in such situations? Is there maybe a hardware button??
Thanks a lot
There's an icon between the soft keys on the bottom of the screen that changes according to the desired input method. Touch that and a keyboard will magically disappear, regardless of the selected input method.
The input method icon, is always displayed when there's a possibility for text input.
ps.: RTM
gnick666 said:
There's an icon between the soft keys on the bottom of the screen that changes according to the desired input method. Touch that and a keyboard will magically disappear...
ps.: RTM
Click to expand...
Click to collapse
Read the manual and like I said:
There's NO icon displayed at the bottom of the screen!
Then use another program, that's the best workaround that i can come up whith..
Or there's the possibilty of a greater underlying problem that would need a Hard Reset to fix it... so far you're the first whith this problem...
Indeed, I've had this too before, try using WM6 compatbile software, I though that was my problem a few weeks ago. An example is Mozilla Minimo, which is horrible on WM6, not being able to remove the keyboard, or even better, hiding it, but not refreshing the contents behind the keyboard
SabbeRubbish said:
Indeed, I've had this too before, try using WM6 compatbile software, I though that was my problem a few weeks ago. An example is Mozilla Minimo, which is horrible on WM6, not being able to remove the keyboard, or even better, hiding it, but not refreshing the contents behind the keyboard
Click to expand...
Click to collapse
Exactly, Minimo is another one of those applications that show this problem.
How about changing your default kb to something else?
There is a reg hack to disable the SIP from displaying when you put focus on any text field, but that is not a good solution for a device that doesn't have a physical kb. I use it on my Treo 750 since I don't need the SIP. However, on the TC, it would make much sense.
On a bit of a side note, I have heard that if TC owners want to use another kb besides the standard Xt9 version, you need to apply the following to disable it:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
Did your registry tweaks will stop pop up of any keyboard when accessing a text area?
That's what I 'm looking for. Because I installed a full screen keyboard and I use it with a button.
Thxs.
up!!!
Pleaaaaase'!
This app will keep the keyboard from poping up automatically. You can still open it manually. I've not tried it with WM6.
http://www.freewareppc.com/utilities/nullkeyboard.shtml
Thanks a lot!
It works!
what full screen keyboard are you using?
I use SPB full keyboard.
Has anyone come up with working solution for mapping hw keys?
I found this thread on Diamond, but no help:
http://forum.xda-developers.com/showthread.php?t=398280
I am using AEKMap to enable both latin/cyrillic input on my TP's hw keyboard. You may google it and give it a try.
There is no need for additional software, just follow this post and you'll get the answer. Worked for me.
Try AE Button Plus.
B.
I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).
Taajuus said:
I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).
Click to expand...
Click to collapse
And that is EXACTLY what i also want to know....
The total lack of hardware-keys on this device is already disturbing enough, but being locked out of the option to remap any of them is truely horrid...
Anyone know of any reg-hacks maybe?
I've got Spb PocketPlus 4 installed btw, and it's got a button mapping function as well...
But when i go into the buttons map, some weird black icons appear with no name attached to it. Can anyone make anything of this? As you can see i've been able to map one thing only: the Spb close-button-contex-menu, which allows me to switch task KW-buttons only....
But this is not enough for me, i need ALT-TAB aswell and off course a VoiceCommand button.
And regrettably the Rapael doesn't have that many HW keys to start with...
I want also to use Home/Back buttons for different purposes,but I didn;t found a solution yet.
Gotten a step closer to what i really need over this weekend:
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
So far, this setup is to my satisfaction, and after two months of use this phone finaly behaves completely the way i want it to...
Hi, guys.
See my post here:
http://forum.xda-developers.com/showthread.php?p=2743845#post2743845
Hope this helps!
Cheers.
helped realy much !!! big thx for that nice instructions
You're very welcome, tk_berlin.
You be sure to let me know if anything in there doesn't make sense or you need any help with it.
Cheers from Canada!
ah cool to see a reply that fast ,)
hmm u got any further with finding out how to set the home button and the backwards button ?
Since the other htc user ,) wrote
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool
ah cool to see a reply that fast ,)
Click to expand...
Click to collapse
Lol. I was on my machine all morning and had XDA open in one of my tabs.
Yes, you can map practically any button in AEBPlus no problem.
hmm u got any further with finding out how to set the home button and the backwards button ?
Click to expand...
Click to collapse
AEBP will also *learn* any keys it doesn't have. So you could use the "Add Button" option, press your Home key, and away you go.
The way I have it set up, holding down the phone key will activate voice command (default behavior).
But remember, assigning commands to the Home or OK buttons (that "Back" button is actually an "OK" button) doesn't unmap what they normally do so you will always go home first and then it will perform <x>-function that you assign.
Personally, I don't like to program the Home or OK buttons because I find that they are "trickier" to press. What I mean is, if you tap the OK button near it's center or close to the left, it doesn't register a press. If you tap it sort of with the long part of your thumb (which is more natural when holding the device in one hand), it registers it. I've tried this with two TP's now and the button behaved the same way on both. Due to this, I find it unreliable to map anything to it.
In any case, as I mentioned earlier, the Volume buttons, Phone and End keys will be unmapped once you attach AEBP to them but the others will not.
Oh -- I forgot to mention, you can map the directional pad as well if that is your thing.
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool
Click to expand...
Click to collapse
It does work, but it sends an OK command first.
I wrote a little utility for hard-coded buttons such as these for another Pocket PC I had (an ASUS P527) called "DoNothing.exe" but we can't apply that work-around here. What I would do is replace the EXEs of apps the hardware keys called with my DoNothing.exe, but in the case of the TP, we definitely don't want to replace START.EXE (which I believe to be the likely EXE (haven't tested this)).
If I find a way to map those buttons reliably, I will let you know, tk_Berlin. So far tho, I've been quite pleased with just using the four buttons I mentioned. The more I use this device and the more I ponder my decision to stay with TFL3D instead of the normal WM interface, the more I realize that I don't need half the add-ons I used to use prior to having TF3D. I am accustomed to very, very, very *heavily* customizing my device, but the setup I have now works great and I really haven't lost nething from my old WM world. In fact, prolly gained a few CPU cycles and memory to boot.
I don't miss the Today Screen at all!!! Now that I think about it, I never really looked at it.
Cya!
Hey fellow XDA-ers.
I hope that in this thread we can unite in finding a solution for the annoying t9 input mehod, without breaking the hardware keyboard.
What's the problem:
I want to get rid of the annoying black t9 input and autocomplete bar, and use the standard WM6.1 version.
What anoys me the most is when you type an address for sending text, you start by typing first name of for instance friends who share a first name, but have different last names, , as soon as you hit space for the lastname, the person with the first name that's on top of the list gets selected..ARG
I also hate the lag it introduces.
So getting rid of the black ezinput part of the keyboard.
This can be done by replacing the eT9 values in your registry at the layout to COMP (et9IME replace by compIME and so on) and this works for soft keyboard.
However, this "fix" breaks some stuff in your hardware keyboard (the SYM key for instance stops working, also you cannot get the euro sign or the pund sign by pressing fn E or fn W)
I of course want the best of both worlds, and especially miss the sym button for getting a "\" whilst typing in shortcuts
So, I have tried so much, but haven't found a solution yet.
Does anybody know how to get this "best of both worlds" option?
Does opening up the on-screen keyboard and hitting the T9 --> ABC switch help?
nope
It doesn't use autocomplete then when typing text, but you still get the black bar at the bottom whilst entering an address, and the space-issue (filling in word after space) is introduced.
I just want the behaviour as when eT9 replaced by comp (ei. you get a couple of suggestion in your screen in light grey boxes, in stead of on bottom bar in black) but with FULL use of my hardware keyboard.
I want to do this without installing all kinds of secondary software that slows my device down, but want to solve it at the root.
Hope I am explaining the problem clearly
But thanks for the reply..
Maybe we can figure it out..
known problem
I've done the t9 compIME registry change and to me, is a must. That black bar was SO annoying and decreased effectiveness.
I have noticed the hardware keyboard does get screwy after doing this.
Using Da_G's roms, he has solved most of the problems in some of his earlier roms. I think the only problem I have currently is a non-working "cent" sign (FN+_). I'll test this again after I flash to his latest Rom.
I think he solves this by implementing SOME of the t9 files. I'll follow up with more accurate results.
player911 said:
I've done the t9 compIME registry change and to me, is a must. That black bar was SO annoying and decreased effectiveness.
I have noticed the hardware keyboard does get screwy after doing this.
Using Da_G's roms, he has solved most of the problems in some of his earlier roms. I think the only problem I have currently is a non-working "cent" sign (FN+_). I'll test this again after I flash to his latest Rom.
I think he solves this by implementing SOME of the t9 files. I'll follow up with more accurate results.
Click to expand...
Click to collapse
If that's the case, making a cab, or posting the necesary files to replace would be ideal.
Does your SYM key work?
sounds like a very good start
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
akky66 said:
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
Click to expand...
Click to collapse
Tnx for your input Steve.
I allready have that set up, but as you will find, it does not get rid of the black bar during txt msgs to field input, if you know what I mean.
It also gives lag on the hardware keyboard input comapred to the comp ide input method, which I find anoying.
What I really want is just the old wm input and auto complete feature without breaking my keyboard.
but as said before, thanks for the input.
This way we can narrow it down and hopefully make the problem easier to understand.
Ta...
tried editing sym files
Tried editing and replacing the txt files in windows directory,
eT9.Raphael.0409.kmap.txt and eT9DeadKeys.txt and renamint the et9 to comp, no luck.
Anybody any suggestions?
akky66 said:
I had this same annoying error
I managed to get it to go away by
sliding out the keyboard
whilst pressing the green FN button hit the spacebar.
This brings up a small menu, select
ABC and bingo, its sorted.
Steveb
Click to expand...
Click to collapse
I did that and the black bar is gone! No more annoying auto-capitalizing and duplicated words! Thanks a lot!
Not quite
Smaniac said:
I did that and the black bar is gone! No more annoying auto-capitalizing and duplicated words! Thanks a lot!
Click to expand...
Click to collapse
It get's rid of the black bar whilst typing a text, however whilst typing an adress in the to field, you will notice that you still get a black bar and proposed name in the bottom of your screen.
This is actually eT9 still running, and slowing down your input, trust me on this
The "old" way, you'd get the proposed names next to your to field, in a light grey box, and you could scroll through them and use the space bar without getting it to autocomplete.
I normally type the first few letters of the persons name, and then use the left and right arrow keys to gp through the matching contacts. That does the trick for me
indeed
GaZ said:
I normally type the first few letters of the persons name, and then use the left and right arrow keys to gp through the matching contacts. That does the trick for me
Click to expand...
Click to collapse
It does the trick and it is how I use it now.
It's just not the solution I am looking for.
I'm a bit wierd in that way, if I see it poping up, I know it's there and it just annoys me...
Don't you just love the way things were before
But thanks for the tip.
No luck here yet
I haven't had any luck yet, anybody else?
This issue is really starting to bug me
Any luck yet with removing the T9 Black bar? I am having this problem as well.
Me too!
i want the old way with the little grey box, it was so much better. It gave a number of people when you typed in a user name for sms and it also gave better autocomplete options.
Solve for all us
Try attached CAB guys from our famous Russian PDA professional. It's remove this bar completely.
yes it worked for me on Touch HD perfectly
Works
Igoran said:
Try attached CAB guys from our famous Russian PDA professional. It's remove this bar completely.
Click to expand...
Click to collapse
TY it completely rocks on Touch HD.
Does this just disable T9 on the hardware keyboard? AND, when entering a contact into sms or email you get the grey list like before?
What about T9 for soft keypad/boards? How does it function now?
I stumbled upon your thread while searching for "disable t9 hardware keyboard".
I have the same problem on my Kaiser... Installed ezinput keypad/board and now have that 'damn' black bar. I'm getting used to it like 'GaZ' but dont really like it...
<<<UPDATE: Only selected abc over t9. Black bar still there.>>>>
use different sip
im not sure if this help but wasnt this issue introduced with the diamond sip set? maybe using different sips might get rid of it. or maybe replacing the new eT9 and using the old wm6 t9 instead in wm6.1 roms. just a thought
Hi,
I'm on a Topaz with WinMo 6.5 Hebrew enabled but English interface.
Lately the number keys in the phone application are shifted one row down. I mean' when I press a number, the phone thinks I pressed the number one row below that. (i.e. If I press the place showing 5, an 8 will be dialed)
Oddly the "TALK" button and the "backspace" arrow button next to it do function normally, as does the whole screen in any other application.
My verbal explanation is not so clear, so please see the attachment. A screenshot with explanatory text.
Any idea what could have caused this? or how to fix it?
I was thinking about removing and re-installing the phone application, but don;t know how to do that, so any help in that direction would also be welcome.
Thanks!
~Azaria.
What is the right forum for this question?
It really bothers me, so really want to solve it.