MS Voice Command on Omnia - General Topics

I installed MS Voice Command on my Omnia.
It works good so far, but when using a bluetooth headset, I don't here the beep, when pressing the PTT button. Even though the microphone symbol appears. I also cannot send any commands via the headset to MSVC.
Without the headset everything works good over the speaker.
Any ideas, how to get it running with the headset?

Related

Will Bluetooth work with Voice Command on XDAII

I have XDA II with the lastest ROM, a Jabra Bluetooth Headset and MS Voice Command,, as much as I can press a button on the XDA and scream my commands at it from afar, I would like to be able to push the Bluetooth headset answer/release button and talk my commands and then hear my replies in the headset, is this possible, and if so, can anyone tell me how to do it.
Thanks Paul
from what i understand it require a profile which is not in the bluetooth stack at this moment
but i dont follow it much because i dont use a headset

At&t Tilt VC 1.6 & Bluetooth

I'm sure you've heard of this issue before but I was unable to find a fix!
I have been using VC1.6 through strictly the device mic / speaker and it has worked great except for some reason it does not announce incoming calls.
Currently using ATT TILT with WM6
Using 520 Plantronics BT Headset
I downloaded "Bluetooth Voice Command Configuration" from XCSdM but it doesn't seem to do anything to help!
When I press the talk/end button on the Headset it enables the bluetooth static but it does not give the VC prompt.
I'd also like it to be able to announce incoming calls through the bluetooth!
Anyone?!
Well, I got the incoming calls to announce!!! Now all I need to do is find out how to get the VC1.6 and my bluetooth synced so that when I press my bluetooth headset button it activates the VC...
Please? LOL
Does your bluetooth headset support the handsfree profile? Not all headsets support the handsfree profile (even if you can use it to pick up and answer calls). I've got VC 1.6 and voice command working just fine with my Tilt and Jabra 8010.
edit: seems your plantronics does support the HFP. Did you ensure you "checked" the box for Hands Free Service when you paired it?
Yes, it's completely paired and the handsfree is checked :-\
I'm stumped. I get incoming call notifications, I get announcement reminders, etc.... but when I push the button on the headset it tries to initiate (or answer) a call.... If I hold it down, it powers off the headset. If I double click it, it calls the last person I talked to.
Maybe I just don't know how to function my headset to get it to prompt for VC?
I followed the "RandyRants" Tip to get everything working and it did activate the announcement of incoming calls, etc... just can't make commands yet.
I'm also using the BT VC Config enabled @ 30 duration.
I'm 1/2 way there!! Now I just need to cross the finish line...
Here's the link yo RandyRants that I followed: http://www.randyrants.com/2007/05/wm6_tip_voice_c.html
Any advice?

WM6.1 Full - MS Voice Command & Bluetooth Issues

I have two issues I was wondering if anyone could help with:
1. Anyone know how to restore MS Voice Command to the Full versions of WM6.1 that were released?
Anyone have a cab file for MS Voice Command (newest version) that will work with WM6.1?
I have installed and tried version 1.60.4622.0, but it will not announce any calls or voice dial.
2. I am having BlueTooth audio issues. When I connect my headset, the action button on the headset will start voice command, but the audio comes out of the Treo speaker and not the headset. I cannot get audio out of the headset unless I have the headset connected and initiate the call from the phone.

Microsoft Voice Command 1.6 users - pls help!

Hi all,
I have a problem with MS Voice Command 1.6.
It 'sorta' works right now ... when I press the button on my BT headset (Motorola H700) it initiates the voice command on the Treo. However, the 'beep' is played from the treo speaker, not the BT headset. When I spoke the voice command, I must also speak to the Treo mic, not the BT headset. This sucks when you are in a noisy environment.
When the call is connected, it does go through the BT headset so that's good. But it's just when you want to initiate a voice command, you have to speak to the mic on the phone. All the announcements also come through the phone's speaker only, not the BT headset.
Has anybody found a fix to this?
Thanks in advance
Try deleting the headset and reacquiring it via bluetooth. I had to do this a couple of times before this corrected
Hmmm I've done it quite a few times already ... but I can try it again.
Mine does this too. If there is no fix, I will have to go back to the at&t one.
Removing and re-adding BT headset doesn't work. After doing some more homework, it seems like the problem is Treo 750, among a # of other phones (like Hermes) uses a BT stack that is incompatible with MS's and that is the reason why.
Searching on the Hermes site there IS actually a workaround which fixes half the problem.
To make long story short, after trying to fix recommended by that site, now I can speak to the BT headset to issue voice command.
Meaning, when I press the BT headset button, I hear the VC chime from my headset, not from the phone's speaker. And when I issue voice command I also speak to the BT headset, not the phone's mic.
What it doesn't fix, is notification STILL comes through the phone's speaker and not the BT headset, even with all the correct settings under MVC.
But I'm ok with that ... I can live with this.
number16 said:
Removing and re-adding BT headset doesn't work. After doing some more homework, it seems like the problem is Treo 750, among a # of other phones (like Hermes) uses a BT stack that is incompatible with MS's and that is the reason why.
Searching on the Hermes site there IS actually a workaround which fixes half the problem.
To make long story short, after trying to fix recommended by that site, now I can speak to the BT headset to issue voice command.
Meaning, when I press the BT headset button, I hear the VC chime from my headset, not from the phone's speaker. And when I issue voice command I also speak to the BT headset, not the phone's mic.
What it doesn't fix, is notification STILL comes through the phone's speaker and not the BT headset, even with all the correct settings under MVC.
But I'm ok with that ... I can live with this.
Click to expand...
Click to collapse
you have a link to this fix???

[Q] BlueTooth Voice Dialer on Nexus S

Hi All,
All my searches on trying to find a resolution of Nexus S not working with Bluetooth voicedial have come up short.
Here's the problem:
I have tryed with multiple bluetooth devices.
The headset pairs fine.
The headset works fine when carring a conversation.
When holding the Voice dial on the BT Headset the "Blue Tooth Voice Dialer" prompt pops up on my nexus S
At which time it just does nothing. Like it doesnt even hear me speaking into the BT headset.
When I use the Voice Dial feature without Bluetooth it works fine, but whenever using a Bluetooth Headset (No Matter Which One) it will never dial a number.
Does everyone else have this issue on their Nexus S? If not, what is the difference between your set and mine? I'm just at a loss why the Nexus S will not work with Voice Dialing over Bluetooth.
dsellers2 said:
Hi All,
All my searches on trying to find a resolution of Nexus S not working with Bluetooth voicedial have come up short.
Here's the problem:
I have tryed with multiple bluetooth devices.
The headset pairs fine.
The headset works fine when carring a conversation.
When holding the Voice dial on the BT Headset the "Blue Tooth Voice Dialer" prompt pops up on my nexus S
At which time it just does nothing. Like it doesnt even hear me speaking into the BT headset.
When I use the Voice Dial feature without Bluetooth it works fine, but whenever using a Bluetooth Headset (No Matter Which One) it will never dial a number.
Does everyone else have this issue on their Nexus S? If not, what is the difference between your set and mine? I'm just at a loss why the Nexus S will not work with Voice Dialing over Bluetooth.
Click to expand...
Click to collapse
Nokia BH-600 (an oldie, I know) works fine with voice dialing. This isn't particularly helpful, but it does work with some headsets.
When you hit the voice dial button do you get the "Speak Now" prompt in the BT headset?
Everything works except if I hit my button on my band new Bluetooth headeset. I got it working by using Clinton as my default for voice dialing. It works with the Bluetooth headset.
Sent from my Nexus S using XDA Premium App

Categories

Resources