I have XDA II with the lastest ROM, a Jabra Bluetooth Headset and MS Voice Command,, as much as I can press a button on the XDA and scream my commands at it from afar, I would like to be able to push the Bluetooth headset answer/release button and talk my commands and then hear my replies in the headset, is this possible, and if so, can anyone tell me how to do it.
Thanks Paul
from what i understand it require a profile which is not in the bluetooth stack at this moment
but i dont follow it much because i dont use a headset
Related
Only when you receive or make a call, the voice then, will be transferred to the buletooth headset. My question is: is it possible to active it at other time other than makeing call? Thus we can use our Voice Dial softwares and listen music from XDA II.
It only can transfer the voice during the phone call to BT headset. I think O2 need to modify the Bluetooth driver to support more function on BT section (like iPAQ PPC, compaq updated the BT Driver to support listen the music on BT Headset).
Hope can heard O2 to modify the BT driver very soon, otherwise my Bt headset for O2 is not very useful !
I think except voice command, there is no missing fuction for using BT headset right now, since the quality of the speaker is horrible for listen music.
I really don't know why everyone asking for listen MP3 with BT Headset with XDA2. Is that people really enjoy listen music with one ear and low qaulity?
The XDA II has the ability to automatically answer a call after a variable number of rings to be set. However, I believe that this option only functions with the headset plug installed and then probably the BT headset won't work. Or does anyone has another idea?
Is it possible to change the register, so you can automatically transfer the call without having the plug in?
killercheung said:
I think except voice command, there is no missing fuction for using BT headset right now, since the quality of the speaker is horrible for listen music.
I really don't know why everyone asking for listen MP3 with BT Headset with XDA2. Is that people really enjoy listen music with one ear and low qaulity?
Click to expand...
Click to collapse
Well some people would like to have audio via Bluetooth to be able to hear Tomtom navigator over the speakers ?
Also, the SPEAKER of the XDA might be bad, that doesn't mean the audio out is bad. With a good speaker or headset quality could be al lot better...
If you use the XDA Adaptor Jabra kit for the XDA1 in the earphone socket it works fine, but if you use the headset with the direct bluetooth connection, then it doesn't.
Bluetooth Music ?
I believe that the bandwith of a Bluetooth Audio connection is far to limited to support anything resembling HiFi, not much point in listening to MP3 music that way.
For TomTom, or my Korean Language MP3 tutorial files, it should be fine though.
Luckily, the speaker is far louder than on my IPAQ 5450 going on sale, so I don't really need external speaker for TomTom.
Regards
Michael
O2 Employee said:
If you use the XDA Adaptor Jabra kit for the XDA1 in the earphone socket it works fine, but if you use the headset with the direct bluetooth connection, then it doesn't.
Click to expand...
Click to collapse
Obvious, your not useing any of the build-in BT functions are you .
You're just getting wired audio out from the XDA/MDA. You could do that with the XDA I also, i didn't buy and XDA II for that !
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
makler1981 said:
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
Click to expand...
Click to collapse
try to chek the settings
bestever said:
try to chek the settings
Click to expand...
Click to collapse
what exact setting do you mean?
try this cab i found on http://mobile.surrealnetworks.com/
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Exitao said:
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Click to expand...
Click to collapse
my ROM is WM6 by vjgrace v3.4
Again I could describe my Nokia BH-101 BT headset with handsfree functionality on WM6 by vjgrace v3.5. It works nice as headset i can hera incoming calls, answer them, call last dialed number. But I CAN NOT make it start voice calling, due to device itself - it does sounds special tone that means that voice dial is started, but my phone does not recognise it. by the way useing celetask - there is special feature - that alows you to redirect all sound to headset and it work. As for me i don't need it (you are to have special BT Headset for listening to music. This headset generates rather bad sound(but not voice).
So again
I can do:
makle calls,
answer calls,
dial last dialed call.
swap and hold calls.
I can not do:
make voice dial
any voice commands
What are the problems:
Everytime I answer the call not by the headset but via the phone it looses the connection with headset, so i need to restart BT service (or headset).
It happens even if I answer by headset but during the call i need to speak via phone then i press right softkey and choose "turn handsfree off" and aain phone looses the headset
In this case I I make new call but in right soft key menu "turn handsfree on" is not active
If it's possible to make phone speak contact's name litterally during incoming call so i could know who is calling me.
IRC, voice dialling with WM phones is a bit of a problem. I seem to recall reading about this somewhere in the XDA-Dev forums.
On my headset, the function that calls for redial is the same for voice dial (wtf? I know.) It always redials.
As for the speaking of the contacts' names, it should be possible... if your phone can speak the contacts' recorded voice names w/o BT.
I'm sure you've heard of this issue before but I was unable to find a fix!
I have been using VC1.6 through strictly the device mic / speaker and it has worked great except for some reason it does not announce incoming calls.
Currently using ATT TILT with WM6
Using 520 Plantronics BT Headset
I downloaded "Bluetooth Voice Command Configuration" from XCSdM but it doesn't seem to do anything to help!
When I press the talk/end button on the Headset it enables the bluetooth static but it does not give the VC prompt.
I'd also like it to be able to announce incoming calls through the bluetooth!
Anyone?!
Well, I got the incoming calls to announce!!! Now all I need to do is find out how to get the VC1.6 and my bluetooth synced so that when I press my bluetooth headset button it activates the VC...
Please? LOL
Does your bluetooth headset support the handsfree profile? Not all headsets support the handsfree profile (even if you can use it to pick up and answer calls). I've got VC 1.6 and voice command working just fine with my Tilt and Jabra 8010.
edit: seems your plantronics does support the HFP. Did you ensure you "checked" the box for Hands Free Service when you paired it?
Yes, it's completely paired and the handsfree is checked :-\
I'm stumped. I get incoming call notifications, I get announcement reminders, etc.... but when I push the button on the headset it tries to initiate (or answer) a call.... If I hold it down, it powers off the headset. If I double click it, it calls the last person I talked to.
Maybe I just don't know how to function my headset to get it to prompt for VC?
I followed the "RandyRants" Tip to get everything working and it did activate the announcement of incoming calls, etc... just can't make commands yet.
I'm also using the BT VC Config enabled @ 30 duration.
I'm 1/2 way there!! Now I just need to cross the finish line...
Here's the link yo RandyRants that I followed: http://www.randyrants.com/2007/05/wm6_tip_voice_c.html
Any advice?
Hi all,
I have a problem with MS Voice Command 1.6.
It 'sorta' works right now ... when I press the button on my BT headset (Motorola H700) it initiates the voice command on the Treo. However, the 'beep' is played from the treo speaker, not the BT headset. When I spoke the voice command, I must also speak to the Treo mic, not the BT headset. This sucks when you are in a noisy environment.
When the call is connected, it does go through the BT headset so that's good. But it's just when you want to initiate a voice command, you have to speak to the mic on the phone. All the announcements also come through the phone's speaker only, not the BT headset.
Has anybody found a fix to this?
Thanks in advance
Try deleting the headset and reacquiring it via bluetooth. I had to do this a couple of times before this corrected
Hmmm I've done it quite a few times already ... but I can try it again.
Mine does this too. If there is no fix, I will have to go back to the at&t one.
Removing and re-adding BT headset doesn't work. After doing some more homework, it seems like the problem is Treo 750, among a # of other phones (like Hermes) uses a BT stack that is incompatible with MS's and that is the reason why.
Searching on the Hermes site there IS actually a workaround which fixes half the problem.
To make long story short, after trying to fix recommended by that site, now I can speak to the BT headset to issue voice command.
Meaning, when I press the BT headset button, I hear the VC chime from my headset, not from the phone's speaker. And when I issue voice command I also speak to the BT headset, not the phone's mic.
What it doesn't fix, is notification STILL comes through the phone's speaker and not the BT headset, even with all the correct settings under MVC.
But I'm ok with that ... I can live with this.
number16 said:
Removing and re-adding BT headset doesn't work. After doing some more homework, it seems like the problem is Treo 750, among a # of other phones (like Hermes) uses a BT stack that is incompatible with MS's and that is the reason why.
Searching on the Hermes site there IS actually a workaround which fixes half the problem.
To make long story short, after trying to fix recommended by that site, now I can speak to the BT headset to issue voice command.
Meaning, when I press the BT headset button, I hear the VC chime from my headset, not from the phone's speaker. And when I issue voice command I also speak to the BT headset, not the phone's mic.
What it doesn't fix, is notification STILL comes through the phone's speaker and not the BT headset, even with all the correct settings under MVC.
But I'm ok with that ... I can live with this.
Click to expand...
Click to collapse
you have a link to this fix???
I installed MS Voice Command on my Omnia.
It works good so far, but when using a bluetooth headset, I don't here the beep, when pressing the PTT button. Even though the microphone symbol appears. I also cannot send any commands via the headset to MSVC.
Without the headset everything works good over the speaker.
Any ideas, how to get it running with the headset?