Hi,
I am newbie on this forum.
I have a question i am using samsung SGH-I780. And i want to install BlackBarry connect on my phone but it dosn't work my sim card registered for using the blackberry email etc...
I am using the version BBConnect_WM6_Professional_BB_al_4.0.0.97.cab but i can registered on the blackberry server.
Before I installed BBConnect_WM6_Profession.cab when i installed and reboot the samsung crash didn.t nothing. I did a Hard reset end the phone is working again.
But i want to now wich kind of version must i use and where can i find it.
Or is it something a registry key and how i do that.
Maybe you have any idea how must i do it.
Regards,
Delityurek007
Anaybody now wich version number van blackbeery connect must is use.
The version BBConnect_WM6_Professional_BB_al_4.0.0.97.cab what i installed is working but i can't register it is stil in progress to regsiter.
Regards,
Deliyurek007
Related
Hi,
I need some help in changing the device ID of my T-Mobile MDA Vario IV.
It's unlocked and contains the newest HTC Firmware of the TouchPro.
Now my problem:
I installed a try&buy version of a programm a few moths ago when I got the brand new MDA, containing the T-Mobile Firmware.
The programm didn't work but the first time it got started, it connected to the internet and submitted my device ID.
Now, after re-flashing the device, I wanted to try this tool again and now it prints about an already registered device id.
What I'd like to do now, is change the device ID and replace it, so I can retry the installation again.
Do you guys think it's possible to do this ?
And if yes, would you please be so kind to explain it to me
At least I'd like to saysorry about my worse german-school-english, I hope you could find out, what I've been typing about !
Thanks in advance,
yaka
yakazaa said:
Hi,
I need some help in changing the device ID of my T-Mobile MDA Vario IV.
It's unlocked and contains the newest HTC Firmware of the TouchPro.
Now my problem:
I installed a try&buy version of a programm a few moths ago when I got the brand new MDA, containing the T-Mobile Firmware.
The programm didn't work but the first time it got started, it connected to the internet and submitted my device ID.
Now, after re-flashing the device, I wanted to try this tool again and now it prints about an already registered device id.
What I'd like to do now, is change the device ID and replace it, so I can retry the installation again.
Do you guys think it's possible to do this ?
And if yes, would you please be so kind to explain it to me
At least I'd like to saysorry about my worse german-school-english, I hope you could find out, what I've been typing about !
Thanks in advance,
yaka
Click to expand...
Click to collapse
Contact the software vendor with your issue, they should be able to get you up and running.
If by device ID you mean your IMEI#, you can't change it.
Hi All,
I've just got an Samsung Galaxy S that is coded to a provider network.
So far so good ...
After I've installed an application and root the phone and then unroot it, my pone doesn't recognize my sim card ...
If I navigate to the Mobile Network from Settings then I get No SIM card inserted.
Facts to take into consideration:
- I have restarted the phone;
- I have applied a factory reset and lost all my data except music and files I've got on it;
- I have shacked the SIM card a little bit;
- I didn't applied a hard reset to it;
- I did tried to put a different provider SIM card and the message I get is to insert PIN then is asking for the UNLOCK NETWORK PIN;
- I am able to log in the phone but with no service
Please note that when starting / restarting the phone I get no Insert PIN popup
Anyone has an ideea why ?
I've got the same problem saptaru.
No sim card is detected in my Galaxy S.
If you happen to solve it, please, do not forget to post a comment.
After dialing #*1234# I can read:
PDA:
PHONE: Unknown
CSC:
I guess the IMEI cannot be recognized by the phone.
At least, I wrote it before rooting and flashing.
Any help will be highly apreciatted!
Hello,
After several restarts, hard reseting the phone and enable-disable networking I still get the sim card removed from time to time ... I don't really know how to debug this... if there is anyone on this forum with the right experience in order to debug the system please write me and maybe we can find a solution.
I must mention that I have unlocked my phone and also rooted it.
Thanks allot !
I have same problem now, can anyone help.
well my sim card has been identified but i can't seem to register on the network.....thats as far as i got as a noob with my first android (xperia x8)......can someone help me from here on......
i get nothing from sims from various networks, it doesn't even register as having a sim in it...
unlocked and darkys rom... driving me crazy, it basically a large mp3 player at the moment...
Maybe have installed the wrong ROM. i9000 has many bases and radios. I had this problem installing 900mhz ROM on a 850mhz sim.
Good luck
Kezzainc said:
Maybe have installed the wrong ROM. i9000 has many bases and radios. I had this problem installing 900mhz ROM on a 850mhz sim.
Good luck
Click to expand...
Click to collapse
Hmm, ok this might be the issue, flashing the htc desire is so much simpler!!
Will try to find correct radios and stuff again...
Sent from my HTC Desire using XDA App
Even I am having the EXACT same issues right now. I also did the factory reset but that doesn't help!
pokopelo said:
I've got the same problem saptaru.
No sim card is detected in my Galaxy S.
If you happen to solve it, please, do not forget to post a comment.
After dialing #*1234# I can read:
PDA:
PHONE: Unknown
CSC:
I guess the IMEI cannot be recognized by the phone.
At least, I wrote it before rooting and flashing.
Any help will be highly apreciatted!
Click to expand...
Click to collapse
Have u managed to find a fix? im havin this issue except my phone remembers the IMEI....
austin.s said:
well my sim card has been identified but i can't seem to register on the network.....thats as far as i got as a noob with my first android (xperia x8)......can someone help me from here on......
Click to expand...
Click to collapse
Have the same problem here. Have you managed to find a solution?
Hi everyone, I don't know if anyone is still interested but I've found that putting the phone into flight mode and then rebooting seems to work, because when I then turn flight mode off it asks me for my pin code and service is restored. As long as the IMEI folder is still in the efs folder then things should be fine.
Hope this helps for anyone who is here or just stumbles across this.
I've had the same problem > Sim Card not found.
I went to the Vodafone repair center today they said the phone had water damage.
Its never been near any water ever-they said that it could have happened months ago - "perhaps you hand wet hands once?". Its still in warranty but the apparent water damage means the warranty its now invalid. So now I'm stuck with an expensive video/audio player with WiFi access. Any help or progress with this issue would be great. Thanks
I fixed the issue bu flashing a working Modem from another rom. Just extract the modem.bin and flash it with odin
sim not discoverable
Hi all
Just wanna share an personal experience
:Been flashing rom in n out in this forum for ma LG P970 n a weird problem occured to me
-just flashed ma latest rom(Lezo Rom) n everything went smooth but only ma network didnt show up , Everything else work . Sim already installed in .
-Ma reflex was that ma sim burnt during flashing(it happened to me once) but not at all !! Tried it on ma nokia 5800 (v vip ) n it show that i had to edit ma PUK n pin code . Edited done
-Put back sim in fone but same result : sim missing
-So what i did was simply to go> setting > theme > brightness n pin code appeared to me .
-TADA n its done
Hope its helpfull for noobs like me
Hi folks,
I'm looking for a little help with this phone, which I got via my brother who works in Korea. I've searched the forum and can't find a lot of discussion of E250's owned by UK residents. I'm on O2, and although the phone displays SKT in the toolbar it's unlocked for use here.
The issues I'm trying to resolve are are simply niggles, as most things function ok ..
1. Device not recognised by either PC or Mac in MTP mode. Drivers are downloaded and installed but device is still not recognised, even in Kies it doesn't work properly. I transfer files using Camera USB Mode.
2. SMS messaging is limited to 80 chars, and then switches to MMS. These arent readable on windows phones, although iOS and Android phones seem to receive them ok.
3. I have a bunch of Korean apps, and various Korean setting from the stock ROM .. but would I be right in saying it's impossible to flash this device with a regular International ROM?
4. Is there a specific thread or forum that I should be asking questions about this device in future?
Thanks chaps! :good:
Can someone answer this?
Can this version be flashed with another ROM?
shv e250s
dw300 said:
Hi folks,
I'm looking for a little help with this phone, which I got via my brother who works in Korea. I've searched the forum and can't find a lot of discussion of E250's owned by UK residents. I'm on O2, and although the phone displays SKT in the toolbar it's unlocked for use here.
The issues I'm trying to resolve are are simply niggles, as most things function ok ..
1. Device not recognised by either PC or Mac in MTP mode. Drivers are downloaded and installed but device is still not recognised, even in Kies it doesn't work properly. I transfer files using Camera USB Mode.
2. SMS messaging is limited to 80 chars, and then switches to MMS. These arent readable on windows phones, although iOS and Android phones seem to receive them ok.
3. I have a bunch of Korean apps, and various Korean setting from the stock ROM .. but would I be right in saying it's impossible to flash this device with a regular International ROM?
4. Is there a specific thread or forum that I should be asking questions about this device in future?
Thanks chaps! :good:
Click to expand...
Click to collapse
flash the JEDI X rom but dont flash the modem and after that flash sjkrenel.. im using e250s too. buti ****ed up my internal storage and i need a pit file for the device to fix it. ^__^ good luck
http://forum.xda-developers.com/showthread.php?p=40007106
root first
dw300 said:
Hi folks,
I'm looking for a little help with this phone, which I got via my brother who works in Korea. I've searched the forum and can't find a lot of discussion of E250's owned by UK residents. I'm on O2, and although the phone displays SKT in the toolbar it's unlocked for use here.
The issues I'm trying to resolve are are simply niggles, as most things function ok ..
1. Device not recognised by either PC or Mac in MTP mode. Drivers are downloaded and installed but device is still not recognised, even in Kies it doesn't work properly. I transfer files using Camera USB Mode.
2. SMS messaging is limited to 80 chars, and then switches to MMS. These arent readable on windows phones, although iOS and Android phones seem to receive them ok.
3. I have a bunch of Korean apps, and various Korean setting from the stock ROM .. but would I be right in saying it's impossible to flash this device with a regular International ROM?
4. Is there a specific thread or forum that I should be asking questions about this device in future?
Thanks chaps! :good:
Click to expand...
Click to collapse
- -
First, root your device, then after that install the cwm mode n7100, after doing that i can now use the phone here in the Phillipines using any simcard of telephone provider here, you can now install titanium back-up to get rid of korean apps.
rmmac9 said:
- -
First, root your device, then after that install the cwm mode n7100, after doing that i can now use the phone here in the Phillipines using any simcard of telephone provider here, you can now install titanium back-up to get rid of korean apps.
Click to expand...
Click to collapse
can cwm custom rom for n7100 be installed on SHV-E250S?
Hi everyone,
I'm new user of android phone.
I've bought this phone. It is a cloned phone (spreadtrum). It is dual sim. The sales person told me that it is Korean, but then I realized it is from China.
After couple of weeks, the problems start to occur.
The #1 sim's slot not functioning at all. The #2 slot, it can detect sim card, but cannot detect network signal. Every information in the sim card such as saved number can be retrieve. Are this problem has anything to do with the baseband?
I'm trying to root my phone, but I don't know which rooting software to use. Will anyone guide me on rooting my phone?
I'm also need to uninstall the application that I circled in the picture that I attached below. Do I need to root my phone first before I can uninstall the applications?
I hope I can get answer to solve my problem. Thank you for all of you.
p/s : Sorry for my broken english.
.
fulzam said:
Hi everyone,
I'm new user of android phone.
I've bought this phone. It is a cloned phone (spreadtrum). It is dual sim. The sales person told me that it is Korean, but then I realized it is from China.
After couple of weeks, the problems start to occur.
The #1 sim's slot not functioning at all. The #2 slot, it can detect sim card, but cannot detect network signal. Every information in the sim card such as saved number can be retrieve. Are this problem has anything to do with the baseband?
I'm trying to root my phone, but I don't know which rooting software to use. Will anyone guide me on rooting my phone?
I'm also need to uninstall the application that I circled in the picture that I attached below. Do I need to root my phone first before I can uninstall the applications?
I hope I can get answer to solve my problem. Thank you for all of you.
p/s : Sorry for my broken english.
.
Click to expand...
Click to collapse
Try this, it may help u out..
http://www.oneclickroot.com/
Before that install the drivers for ur device in ur pc and enable usb debugging mode in ur android.
Hit thanks rather than typing it now Free
parkourkarthik said:
Try this, it may help u out..
Before that install the drivers for ur device in ur pc and enable usb debugging mode in ur android.
Hit thanks rather than typing it
Click to expand...
Click to collapse
I've tried it, but my pc doesn't have the drivers for the phone. I've been searching for the driver, but did not get one. Could anybody help me to find the drivers?
Hello everyone, as a lurker, I got many usefull things through this forums, so thank you really, you have saved my neck countless times.
This is my first post, because I ran into a problem and I can´t find a reliable solution for this.
You see, I ofered a service to someone to repair his Moto G (model is XT1543, Dual SIM, 16GB ROM and 2GB RAM).
It was messed up very badly, so I thougth that the only way possible was to factory reset the phone.
After that, the phone, after the wifi selection at startup, asks for a google acount, I tried to log with mine but the phone says that I need to log with an acount used in that phone before. I called to the owner, but unsurprisingly, he can´t remember his email, neither his password.
The phone refuses to boot with any other google acount, it always asks for the previously used, but is missing.
I reinstalled the stock rom, and the result is the same, it seems the problem is server based and not hardware.
I attempted to install a custom ROM, but the bootloader check on dev settings was unmarcked, thus, impossible to acces now.
Am I screwed over? :crying:
Thanks.
Welcome to the world of Factory Reset Protection, and yes, your basically screwed.
Sent from my MotoG3 using Tapatalk
DartzSoryu said:
Hello everyone, as a lurker, I got many usefull things through this forums, so thank you really, you have saved my neck countless times.
This is my first post, because I ran into a problem and I can´t find a reliable solution for this.
You see, I ofered a service to someone to repair his Moto G (model is XT1543, Dual SIM, 16GB ROM and 2GB RAM).
It was messed up very badly, so I thougth that the only way possible was to factory reset the phone.
After that, the phone, after the wifi selection at startup, asks for a google acount, I tried to log with mine but the phone says that I need to log with an acount used in that phone before. I called to the owner, but unsurprisingly, he can´t remember his email, neither his password.
The phone refuses to boot with any other google acount, it always asks for the previously used, but is missing.
I reinstalled the stock rom, and the result is the same, it seems the problem is server based and not hardware.
I attempted to install a custom ROM, but the bootloader check on dev settings was unmarcked, thus, impossible to acces now.
Am I screwed over? :crying:
Thanks.
Click to expand...
Click to collapse
Follow These Steps :-
1. When Your Cell Start After Flash Choose " American English as your Language"
2. Connect your Cell To Wifi Or to Mobile Data .
3. When Your Device Ask You for Login .
Dont login just Choose the Option below Forgot my Account and it Gives you a option .
Like: Enter Your Mobile Number.
Now, Enter Your mobile Number attachedto your gmail ID.
Google automatically recognize your ID , Enter password.
Now Your Mobile Open.
Didn't see above option. I bought one locked of eBay. I unlocked it in about an hour. It was the xt1541 16 GB version with android 6.0 January security update. Search on YouTube for FRP unlock moto g3 plenty of vids. Not many in English but not hard to follow.
Sent from my P6-U06 using XDA-Developers mobile app