Related
Thanks to the resources at this site.
I have just created the BigStorage for the WWE 1.13 ROM on my i-mate JAM.
I have kept my 1.13 radio ROM (instead of the shipped 1.12 radio ROM). So, my device information is as follows:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: blank
I did the exact same thing today! Nice to be able to pick and choose amongst the different parts of the ROM
Can you post a link where the 1.13 ROM is located? I just searched the ftp site and didn't find any.
Thanks in advance.
zerimar said:
Can you post a link where the 1.13 ROM is located? I just searched the ftp site and didn't find any.
Thanks in advance.
Click to expand...
Click to collapse
I guess they are using the Dutch Rom (WWE base) (http://forum.xda-developers.com/viewtopic.php?t=31249).
Any change & different compare to 1.12 rom???
Yes, that's the ROM I used. Haven't noticed anything different yet, though. But the old 1.12 ran very well for me, so I didn't expect much to change anyway...
Talents said:
Thanks to the resources at this site.
I have just created the BigStorage for the WWE 1.13 ROM on my i-mate JAM.
I have kept my 1.13 radio ROM (instead of the shipped 1.12 radio ROM). So, my device information is as follows:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: blank
Click to expand...
Click to collapse
Hi Talents,
Could you kindly share the 1.13Radio ROM download link for us.
Thanks a lot and looking for ur kindly share.
Regards,
Band
Talents said:
Thanks to the resources at this site.
I have just created the BigStorage for the WWE 1.13 ROM on my i-mate JAM.
I have kept my 1.13 radio ROM (instead of the shipped 1.12 radio ROM). So, my device information is as follows:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: blank
Click to expand...
Click to collapse
did you use your backup ??? how it fit in new 1.13.rom?
ftp://xda:[email protected]/Magician/Shipped_ROMS/NL_11300_131_11200.exe
ftp://xda:[email protected]/Magician/Radio/MagicianRadio_1.13.00_maupgrade.zip
I used Sprite Backup under the 1.12 ROM and have no problem in restoring the files to work under 1.13 ROM.
You should of course first copy your original files in BigStorage to your SD card or PC.
bluetooth
thank you a lot !!!....
& what about bluetooth bugfix, did you check it??? tell us about...
Talents said:
ftp://xda:[email protected]/Magician/Shipped_ROMS/NL_11300_131_11200.exe
ftp://xda:[email protected]/Magician/Radio/MagicianRadio_1.13.00_maupgrade.zip
I used Sprite Backup under the 1.12 ROM and have no problem in restoring the files to work under 1.13 ROM.
You should of course first copy your original files in BigStorage to your SD card or PC.
Click to expand...
Click to collapse
Thanks u so much for ur kindly share
The only new file in the Extended ROM seems to be Camera Wizard RC28 instead of RC22 that was shipped with some 1.12 ROMs.
Camera now becomes version 2.70 (build 21026), with both screen and menu in landscape display. The older build 20112 came with screen in landscape and the menu in portrait !
Album is now version 2.51 (build 20745).
People pm'ed me to ask for the 1.13 BigStorage ROM.
I simply upgraded to 1.13 with the shipped ROM and used hex editor to search for 02 00 00 80 00 20 and replace with b8 01 - this is the best method to obtain BigStorage.
1.13wwe ROM image--->FTP
Talents,
any chance to upload the 1.13 image to FTP? Couldn't update for a reason(as not able to find any 80 00 combo in the backup image strange....
ill try to replace 416 bytes from your image....
thanks in advane
can anyone upload ver. 1.13wwe image backed up FROM YOUR DEVICE to ftp please?
I downloaded it from this thread http://forum.xda-developers.com/viewtopic.php?p=173721#173721. It's in the first post. I upgraded last night to ROM 1.13 with BigStorage but installed Radio 1.13 instead of the original. Havn't seen any major iimprovements yet but will let you guys know if i discover anything.
Guys,
Can anybody upload to ftp the 1.13 magician ROM IMAGE (with big storage and preferably radio 1.13) FROM YOUR OWN DEVICE please?
As I cannot make a big storage myself on 1.13WWE for a reson I'd like to replace first 416bytes of your image with my header so it works for me.
thanks in advance
download it here: http://jainoxi.doq-net.com/mda/MA_TMNL_11300_131_11200_Ship_w_1.13_Radio_w_BigStorage.zip
@alelas
Please do some more investigating, before using the ROM of someone else. Obviously you are doing something wrong, since it works for the rest of us. If you don't find out what that is, you may end up crashing your phone big time, using a customized ROM from another Magician.
@Jainoxi - thanks a lot
@HBK: obviously smth is wrong...I guess the problem is in my corrupted SD card
Talents said:
People pm'ed me to ask for the 1.13 BigStorage ROM.
I simply upgraded to 1.13 with the shipped ROM and used hex editor to search for 02 00 00 80 00 20 and replace with b8 01 - this is the best method to obtain BigStorage.
Click to expand...
Click to collapse
Hi,
I am trying to get BS too, but can't find the byte pattern (I am not using the character option). Does this mean the rom-dump is corrupt or what? I have the original 1.13 tmo Dutch rom on a Dutch tmo mda-compact. So far everything working OK, but now I'm stuck.
Update on this:
Tried with MKS method and now I'm down to 'screwed'. I flashed back the changed file and now the 'storage-folder' disappeared, exr-rom still there, so I lost 7MB of ram. Even the original upgrade and flashing back the extracted rom did not solve my problem.
Can someone pls upload a correct rom-file with ext-rom intact, so I can restore to the original situation?
Greetings, M
I have Qtek s110 with following firmware version:
ROM version: 1.12.00 WWE
ROM date: 05/08/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.120 WWE
I would like to update ROM for BigStorage same as it is writed here.
But I can`t understand what exactly version of BigStorage ROM from ftp.xda-developers.com I need take
I tried different versions with "1.12" index, but in all cases I have "Chek sum error". Qtek doesn`t reboot and can`t exit from ROM upload mode until I reinstall my original old ROM.
there are alot of guide here...just pick one & follow the steps..
that what i did & just 2 days ago upgrade to 1.13rom +radio+big storage.
Look for the 1.13 rom.thats the latest so far
Blatant self-promotion aside, I recommend this one.
...well you can at least take the FTP links from the top of the file!
Hey there,
I tried searching, but still did not find a guide which correctly explains what exactly is the big storage rom.
I would be obliged if anyone could point me tothat topic.
Thanks.
rohseq
umm wel from a fresh BigStorage rom Installer what i did was follow the wiki thats posted here and used the preivious guide that toomuchdogur mentioned for that extra help and i used the tmobile1.13 rom to upgrade i just downloaded the rom extracted it hexedited the rom as the wiki and guide says ( i didnt play with the device id thing and i had no problem) then uploaded it by first going into bootloader mode and using MaUpgrade_noid.exe and found no problem
rohseq said:
Hey there,
I tried searching, but still did not find a guide which correctly explains what exactly is the big storage rom.
I would be obliged if anyone could point me tothat topic.
Thanks.
rohseq
Click to expand...
Click to collapse
BigStorage: In short, its hacking your Magician's ROM so that the measly 5MB of Storage that it usually has (NOT Memory (RAM), Storage - check it under Settings > Memory > Storage Card > Storage) is upped to 27MB.
Obviously 22MB of flash memory doesn't just materalise from nothingness - 22MB of the Magician's 27MB of Storage is usually reserved for all the customisations your operator may put in the ROM, which ranges from useful (Smart/Intelli Dialer, PhonePad, ClearVue Suite, GPRS and MMS settings, JAVA support and Camera software) to utterly useless and annoying (Provider's themes, wallpaper, colours, etc, where T-Mobile's grey and pink is especially crap). The BigStorage process hacks the Magician's ROM, ordering the device to ignore and delete the provider's customisations (called the Extended ROM), and remove the locks and restrictions placed on the reserved 22MB so that it can be used along with the default 5MB of user-accessible Storage allocated.
Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too
you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn
well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support
1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)
Thank you very much.
I'm now downloading and trying the ways you pointed out.
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here
ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster
I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.
Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx
White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx
mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.
Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx
RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx
Hello,
In some GUI dialogs on my x7510, the text is rendered as squares or blocks rather than letters. This is most apparent in the Opera browser settings screens. Any assistance to help fix this would be great.
Also my x7510 locks up quite often. It will get into a mode where I cannot get back to the main HTC home screen even if I press the home button on the front bezel. This has happened in several programs (exchange email, Opera browser, and Wifi settings) Soft power off also does not help. I have to do a device reset to get the machine working again. If anyone has a fix or suggestions for this issue, please let me know.
Another odd thing that is happening to me is that the weather panel of the HTC home page will not update via AT&T HSDPA or edge. I have to be connected to WiFi to get the weather data to update. Anyone have suggestions to fix this?
I am running the latest version of the WWE OS that I got from the cmonex sticky:
CE OS 5.2.19217 (build 19217.1.0.6)
Rom version: 3.29.707.3
ROM date: 07/18/08
Radio version: 1.58.00.00
Protocol Version: 32.91.7020.20H
ExtROM version: 3.28.709.102
Model No.: ATHE400
Platform: PocketPC
Also, since flashing the above ROM on 12/25/2008, I have not installed any additional programs. I still have these issues with the ROM as installed clean.
Thank you in advance for any help!
There is no fix for this but to revert back to the original stock ROM. It all started when you installed a new one right?
Stock ROM also had issues
Hi! Thanks for your reply.
The stock ROM also had all of these issues. I waited to post until I was able to flash the newest ROM from xda-developers.
The blocks are annoying but I can live with them. The lockups are making the system kind of unusable.
My original config was this:
x7510 shipped:
CE OS 5.2.19209 (build 19209.1.0.2)
Rom version: 3.27.405.3
ROM date: 05/28/08
Radio version: 1.59.00.00
Protocol Version: 32.91.7020.20H
ExtROM version: 3.28.709.102
Model No.: ATHE400
Platform: PocketPC
I keep my systems very plain and I avoid adding front ends until I feel sure that the bare OS is stable.
I suppose I could uninstall these items:
Opera
Google Maps
GPS Test
and give it a few days.
The new WWE ROM 5.2.19217 (build 19217.1.0.6) had Opera and Google Maps installed as part of the ROM iimage.
How to load EXT ROM?
Christian,
I noticed that your config and my original config are the same except for the Ext ROM:
You have: 3.27.405.104
A) How do I get my hands on that ROM?
B) How do I load it into my x7510?
I would like to try the same configuration that you have on your x7510 since you have no lock ups.
What does the Ext ROM do anyway?
Thank you,
Jonathan
LittleBrotherJ said:
Christian,
I noticed that your config and my original config are the same except for the Ext ROM:
You have: 3.27.405.104
A) How do I get my hands on that ROM?
B) How do I load it into my x7510?
I would like to try the same configuration that you have on your x7510 since you have no lock ups.
What does the Ext ROM do anyway?
Thank you,
Jonathan
Click to expand...
Click to collapse
Mine came pre-installed. I have not changed anything on mine since I bought it.
A) I don't know how you can get a copy of my ROM. I assumed you already had a way to revert back to the original ROM before trying out the new ROMs.
B) I don't know. Sorry.
YES, I am perfectly happy with the stock ROM. No freezes and does the job as I wanted, not to mention, I already have a ton of applications installed. I have filled 6MB of the flash disk with applications, about 150 of them or more. 50 of them are games, the rest are a lot of references.
I believe the Extension ROM installs the Phone settings for the different carriers around the world, and Google Map application.
Chinese
I believe your Opera is a Chinese version. Mine came that way as well. All of my install disks were Chinese too. The squares you see are your device not recognizing the language. I installed a beta version of Opera (9.51 Beta build 1718_a). This got rid of the "square boxes". The only issue I have with it is upon exit Opera switches my device to "portrait" mode (a minor issue compared to the boxes). There is 9.52 Beta version of Opera that I have not tried yet as well. Anyway Opera is very usable now and I can change settings.
ROM:....................3.27.405.3
ROM Date:.............05/28/08
Radio version:........1.58.00.00
Protocol version:....32.91.7020.20H
ExtROM version:.....3.28.709.102
ATHE400
PocketPC (WM 6.1)
Hello guys I have installed the
1) EnergyROM 'Warhawk'
2) ROM Version: August 16th 2009 WWE
3) ROM Date: 08/14/09
4) Radio Version: 3.43.25.19
So for now everything is ok until i found a problem with "Text Messanging", i change to "Threaded layout", and i change the same to the "Advanced Config Tweak" and to "WVGA Tweak". after that i restart my device and nothing changed.
My device is Topaz
Please Help!!!
You probably should post bug report under EnergyRom thread. i found the same problem with Tom's ROM and switched to UdK, which have option to switch to "traditional" layout and it actually works.