Database Info

MDA Compact upgrade in one package

Hello, i have done lot of reading there about all upgrades on our Magician's.. So for everyone who is new here to this forum, there is latest update available with easy few steps to upgrade
ROM version 1.12.00 WWE
Radio version 1.13.00
Protocol version 1337.43
ExtROM version 1.12.131 WWE
It's an IMATE ROM, with CZ (Czech) customized ExtROM. so anyone who want to cook his own ROM, just
download this file > http://live61.com/mda/yourownEXT.nb1 and follow Extended ROM steps above
It's complete Dump of my device, including CE ROM, EXT ROM and RADIO STACK. This update flawlessly worked on 3 devices i had in my hands.. So I hope, it will help you with no problems. (no need to change any 440bytes and other 'hacks' found there in forum).
Install is so easy
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
2. write it on your SD card (at least 128mb) with NTRW application - "ntrw.exe write Imate_WWE_1.12_1.13_1.12.131.nb1 g:" (g: as your SD card drive letter)
3. insert SD card to MDA, and enter bootloader with CAMERA+POWER buttons together with RESET
4. after about 8 seconds you will get message with "Sections=2, press Power.." so press Power button and wait until "Checksum OK" message appears. Then reset your MDA
Thats it!
Customized Extended ROM
1. install this plugin to your Total Commander. (restart of PC needed!) http://live61.com/mda/VirtualDisk_1.30b2.rar
2. mount as an virtual image yourownEXT.nb1 file
3. make here your desired changes and unmount it
4. run WinHEX, open modified yourownEXT.nb1 (ouch.. i know, you need this.. http://sweb.cz/ftp1/WinHexSerial.txt)
5. select whole file with CTRL+A and copy to clipboard CTRL+C
6. open Imate_WWE_1.12_1.13_1.12.131.nb1 file, go to OFFSET 2C0019C and write clipboard data with CTRL+B
7. save Imate_WWE_1.12_1.13_1.12.131.nb1 and follow Install steps
If anything goes wrong, please let me know. Good luck. John

im going to try it....
(idem to tam šupnúť...)
i believe i will be able to do it, becouse i was not able to do before with dumped rom on ftp...

Hi
I made a SD card as You wrote.
When I make a HR, I have clear dark screen with "Serial" on the top and "v 1.00" on the booteom of the screen.
What is wrong?
Thanks for help.

howto
@all,
please aid a novice:
-How do I mount "your own extrom" in total commander???
-What and how can I make changes then????
Thanks in advance

kavalir said:
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
Click to expand...
Click to collapse
Recently got a M500 and trying your rom but the link posted my be dead. Can you upload it again. Thanks.

how to upgrade only Radio 1.13 ? i downloaded from ftp
MagicianRadio_1.13.00_maupgrade
currently, i using Qtek1.12ROM for o2mini..
Can i just run the setup file ? then do upgrade only radio part.

Is there a newest rom than mine ?
hi,
i just bought a mda compact with t mobile few day ago,
it look like this
ROM Version = 1.12.00 WWE
ROM Date 05/28/05
Radio version 1.12.00
Protocol version 1337.42
ExtRom 1.12.152 WWE
is anything that can be upgraded ?
and how can i get the 02 active GUI on it ?
or remove the Tmobile one ?
I did try to find the answers elswere but seam to be a tiny bit complex to find out. (probably my english
i used to be able to surf the internet over GPRS for free with the o2 payand go sim card, i still do with the 02 montly thought.
any one know more about it ?

Upgrade??bigStorage??extROM??help....noobie

1) Problem:
was running on 1.11 with extROM 1.03, wanted to upgrade to TMO 1.13 but there was a country id error.....so i did a hard reset and reset again b4 it run the autoconfig thing. then the extROM folder came up(which i think is the bigStorage thingy) and no more extROM. tried the upgrade again but same result...so i ran the cab files or watever u call those in the extROM folder 1 by 1. some of which i think was needed for my mini to run w/o any problem.....now extROM back running on 1.11. So how do i upgrade.
2) Queries:
if i were to clear the extROM folder by copying them into my PC/thumbdrive/CD(for safekeeping,in case something bad happens), then copy the important ones into my SD card and run them...can my mini still work?
Been playin around a little but still need a lot more to learn. Can some1 please educate me.
Thanx in advance.

hi,
There are two main thread's about upgrading to tmo 1.13
- upgrading to radio 1.13...
- tmo official 1.13...
You can find all the needed info there including a BS 1.13 rom available at the ftp & a patched shipped-rom also available on the ftp
Cheers, M

WM5 Memory Map

Hi guys (and gals)
First, thanks to c_shekhar for the Himalaya WM5 roms. Top Job
I'm quite new to WM5 and it has taken a little while for me to work out
how the XDA memory usage has changed from older PocketPC versions.
I thought I'd share how I think it looks for others, like me, who are using WM5
for the first time, thanks to the great ROMS on this site.
I've probably got bits of this wrong. Feel free to correct me
1st we need to understand what memory is in an XDAII:
128MB RAM (non-volatile after soft reset | volatile after hard reset)
32MB Flash ROM - Integrated with CPU (non-volatile after soft or hard reset)
32MB Flash ROM - Disk On Chip (DOC) (non-volatile after soft or hard reset) *
* All or part of this will get formatted if you select YES on the FORMAT STORAGE option on hard reset on WM5
The 32MB DOC Flash Rom is divided into two 16MB partitions by default:
Half goes to extROM
Half goes to persistant storage
Pre WM5 the memory map looked like this:
PRE WM5 - MEMORY MAP
--------------------------------------------------------------------------
...................| Storage (Installed Program Files, My Docs etc
128MB RAM.| Programs (running apps)
...................| Pocket PC OS (i.e. running state)
--------------------------------------------------------------------------
32MB Flash / CPU..| System ROM (i.e. where the ROM .nbf goes) (/Windows folder?)
--------------------------------------------------------------------------
16MB Flash DOC.| extROM (hidden by default. Contains vendor specific apps / hard reset - system startup)
16MB Flash DOC.| Persistant Storage (/Storage folder on pre WM5)
--------------------------------------------------------------------------
Pre WM5 pocketPC versions allowed you to dynamically select the amount
of (non-persistant) storage / Program space via the memory applet. Obviously
a hard reset would lose any programs installed into this RAM area of memory. Also the file system had a /Storage folder so you knew where to put impotant files that a hard reset wouldn't wipe out.
Things have all changed with WM5. Thus: (Based on c_shekhar 3.50a ROM)
WM5 - MEMORY MAP
--------------------------------------------------------------------------
...................| 37MB Programs (running apps)
...................| 40MB RAMDisk Storage (Non persistant storage /RAMdisk folder)
128MB RAM.| 24MB PagePool (PocketPC OS Cache ares (?))
...................| 27MB Pocket PC OS (i.e. running state)
--------------------------------------------------------------------------
32MB Flash / CPU | System ROM (i.e. where the ROM .nbf goes) (/Windows folder?)
--------------------------------------------------------------------------
16MB Flash DOC.| extROM (hidden by default. Contains vendor specific apps / hard reset - system startup)
16MB Flash DOC.| Persistant Storage (14MB Formatted space)**
--------------------------------------------------------------------------
** WM5 no longer has a /Storage folder. Now /My Document /Program Files etc
reside in this persistant area
Obviously one benefit to this re-arrangement is that a hard reset does not wipe
out your installed program, assuming you don't FORMAT STORAGE in the WM5 hard reset screen.
If you are using c_shekhar's ROM then the extROM area is not used. In fact its
probably is sitting there invisible to you with the old pre WM5 vendor apps wasting space. There are tools to make this 16MB partition visible and merge it into the existing 16MB DOC partition to give you 32MB of persistant storage.
Instructions >here<
To check how much storage space you have:
Start>>Settings>>System Tab>>Memory
Storage Total will be circa 14.60MB for standard Install
Storage Total will be circa 30.53MB for merged extROM modification
There are also ways to change the size of the PagePool and RAMdisk but they are not discussed here. Search for c_shekhar + PagePool + RAMdisk
I hope this has been helpful
Please post any corrections, or further useful info
Regards
S_F

sawyer_family said:
Hi guys (and gals)
I hope this has been helpful
Please post any corrections, or further useful info
Regards
S_F
Click to expand...
Click to collapse
very helpful indeed
thanks for all the research

Sorry to ask you silly questions... I am a newbie about PDA. And I stil didn't understand clearly concerning why extROM exist in PDA.
1. What is the real function extROM ?
2. I read from your writing, If I used c_shekhar rom it means extROM doesn't have any function anymore. Is it true ?
3. What are the risks if I merge extROM to storage ?
I hope you would like to be kind to explained this for me.
Regards
Selangkahlagi

Well..
selangkahlagi said:
Sorry to ask you silly questions... I am a newbie about PDA. And I stil didn't understand clearly concerning why extROM exist in PDA.
1. What is the real function extROM ?
2. I read from your writing, If I used c_shekhar rom it means extROM doesn't have any function anymore. Is it true ?
3. What are the risks if I merge extROM to storage ?
I hope you would like to be kind to explained this for me.
Regards
Selangkahlagi
Click to expand...
Click to collapse
...again I could be wrong here, and c_shekhar would know more about his ROM, but I think the general idea was:
1. XDA Manufacturer (i.e. HTC) provides main system ROM i.e. the pocketpc OS
2. The network supplier, or distributer (e.g. O2) provide the extROM ROM
Then when you hard boot the OS loads and autoruns and installs the branded
applications from the extROM to give you a clean branded install after a hard boot.
The extROM is readonly and invisible so you don't mess it up and can always
get back to the standard installation O2 or other supplier provided in the box.
My understanding is it is only used during a hard boot to install branded apps.
If you decide to install a ROM like c_shekhar's then he installs all the software
you need into the main system ROM. He doesn't use extROM to provide any
other applications that would install on a hard boot. In fact I assume he
takes out any call to the autorun in extROM which is why there are no app loads
when you hard boot his ROMs.
So you have a choice. Leave extROM alone and let 16MB of nonvolatile flash
rom sit there with O2 apps you'll probably never use again. Or, merge it into
the 16MB of storage space and get circa 32mb or storage.
There are always risks from flashing a pda device and messing about with flash
memory, especially from a non-official source. But then there are huge benefits from
c_shekhar providing us with a fantastic WM5 ROM that we otherwise wouldn't
have.
Hope this is correct and helpful.
S_F

What Needs To Be Done?
Dear all ,After upgarding rom of Shekhar My device stopped Reading MMC And SD card,unfortunately till now i have not get any reply about this issue ,can some one help me outof it ?
Require help >>>>>>>>
Thanks In advance.

creations_31 said:
Dear all ,After upgarding rom of Shekhar My device stopped Reading MMC And SD card,unfortunately till now i have not get any reply about this issue ,can some one help me outof it ?
Require help >>>>>>>>
Thanks In advance.
Click to expand...
Click to collapse
Wrong thread to be asking in. But SD slot works ok on my XDA with 3.50a.40CS
I'd suggest you go back to an official ROM version and verify its not a hardware fault.

sawyer_family said:
...again I could be wrong here, and c_shekhar would know more about his ROM, but I think the general idea was:
1. XDA Manufacturer (i.e. HTC) provides main system ROM i.e. the pocketpc OS
2. The network supplier, or distributer (e.g. O2) provide the extROM ROM
Then when you hard boot the OS loads and autoruns and installs the branded
applications from the extROM to give you a clean branded install after a hard boot.
The extROM is readonly and invisible so you don't mess it up and can always
get back to the standard installation O2 or other supplier provided in the box.
My understanding is it is only used during a hard boot to install branded apps.
If you decide to install a ROM like c_shekhar's then he installs all the software
you need into the main system ROM. He doesn't use extROM to provide any
other applications that would install on a hard boot. In fact I assume he
takes out any call to the autorun in extROM which is why there are no app loads
when you hard boot his ROMs.
So you have a choice. Leave extROM alone and let 16MB of nonvolatile flash
rom sit there with O2 apps you'll probably never use again. Or, merge it into
the 16MB of storage space and get circa 32mb or storage.
There are always risks from flashing a pda device and messing about with flash
memory, especially from a non-official source. But then there are huge benefits from
c_shekhar providing us with a fantastic WM5 ROM that we otherwise wouldn't
have.
Hope this is correct and helpful.
S_F
Click to expand...
Click to collapse
Good Sutdy and informations for the newbees. appriciations for sawyer_family. There exists the autorun program for installing the third party S/Ws and configurations at the time of hard reset developed by buzz. But, I have not provided it in the ROM. It can install the S/Ws and configurations from the resrve space into the RAM just like it used to be with the ExtROM. Here the advantage is that ExtROM can be placed on the Storage card. Like I am using it on my device to install the third party S/Ws and all the stuff at the time of hard reset. I have placed all these stuff in folder called "Storage Card/ExtROM". May be I provide it in my next release If people require. ......

c_shekhar said:
Good Sutdy and informations for the newbees. appriciations for sawyer_family. There exists the autorun program for installing the third party S/Ws and configurations at the time of hard reset developed by buzz. But, I have not provided it in the ROM. It can install the S/Ws and configurations from the resrve space into the RAM just like it used to be with the ExtROM. Here the advantage is that ExtROM can be placed on the Storage card. Like I am using it on my device to install the third party S/Ws and all the stuff at the time of hard reset. I have placed all these stuff in folder called "Storage Card/ExtROM". May be I provide it in my next release If people require. ......
Click to expand...
Click to collapse
Nice idea c_shekhar, it is a brillian idea to put extROM in storage card. It will safe much place in ROM. I will waiting your work mate !!!!

sawyer_family said:
...again I could be wrong here, and c_shekhar would know more about his ROM, but I think the general idea was:
1. XDA Manufacturer (i.e. HTC) provides main system ROM i.e. the pocketpc OS
2. The network supplier, or distributer (e.g. O2) provide the extROM ROM
Then when you hard boot the OS loads and autoruns and installs the branded
applications from the extROM to give you a clean branded install after a hard boot.
The extROM is readonly and invisible so you don't mess it up and can always
get back to the standard installation O2 or other supplier provided in the box.
My understanding is it is only used during a hard boot to install branded apps.
If you decide to install a ROM like c_shekhar's then he installs all the software
you need into the main system ROM. He doesn't use extROM to provide any
other applications that would install on a hard boot. In fact I assume he
takes out any call to the autorun in extROM which is why there are no app loads
when you hard boot his ROMs.
So you have a choice. Leave extROM alone and let 16MB of nonvolatile flash
rom sit there with O2 apps you'll probably never use again. Or, merge it into
the 16MB of storage space and get circa 32mb or storage.
There are always risks from flashing a pda device and messing about with flash
memory, especially from a non-official source. But then there are huge benefits from
c_shekhar providing us with a fantastic WM5 ROM that we otherwise wouldn't
have.
Hope this is correct and helpful.
S_F
Click to expand...
Click to collapse
Thany you sawyer_family, you help me much to understand this topic.

Best WM6.1, Radio, Ext Rom To Get???

Hi All,
I am trying to source the latest and best Radio, CE ROM, and EXT Rom for my XDA Exec G4 64Mb.
I have updated to a new WM6.1 ROM but yet the O2 Ext ROM remains untouched and auto runs after a reset which crashes the device.
So what is the best way to completly erase the XDA, and what is the best ROM, Radio and EXT Rom available for a G4 64Mb, which is what I think I have details below.
The Flash chip says it is 128MB and the ram 64Mb so is this a G4 64MB as I only have 39Mb free storage???
Thanks in advance for any info.
IrishLad
Current Software:
ROM Version: DFT.U.V1 WWE
ROM date: 02/03/08
Radio version: 1.18.00
Protocol version: 42.54.P8
ExtROM version:
Hardware:
CPU: Intel(r) PXA270
Speed: 520Mhz
RAM Size: 64 MB
Flash size: 128 MB
Flash chip type: M-Systems
Data bus: 32 bits
Storage size: 39.59 MB
LCD: 480 x 640 TFT
Colours: 65536

WM6.1
Thanks Again

I'm expecting a fixed 6.1 in the next few days - Snapvue in the Darkforce one was a bit buggy but the rom is fine when it's disabled (just like wm6, but with threaded SMS, nice but not amazing, and a zoom function in IE).
As for the Radio version, I, along with many, prefer 1.17, check out the latest discussion on this here: http://forum.xda-developers.com/showthread.php?t=366263
And for the ExtROM? Well, unlocked and empty of course
I took an empty extrom from an old ROM and it works great every time.
Good luck!

Thanks
Hi,
Thanks for the reply.
I have updated my radio to 1.18 and also unlocked and emptied my ExtROM.
My problem is that after flashing the CE ROM and Radio I am still getting the offical O2 boot screen?
When I empty the ext rom and then reflash shoud I have more free storage available, also from the sepcs I posted above am I right to say I have a G4 64Mb XDA?

boot splash
IrishLad said:
Hi,
Thanks for the reply.
I have updated my radio to 1.18 and also unlocked and emptied my ExtROM.
My problem is that after flashing the CE ROM and Radio I am still getting the offical O2 boot screen?
When I empty the ext rom and then reflash shoud I have more free storage available, also from the sepcs I posted above am I right to say I have a G4 64Mb XDA?
Click to expand...
Click to collapse
You can change your boot splash easy, just read the wiki. there is a section on it.
Regards
Jay

Boot screen
Hi,
I know you can change the boot screen, my question is more related to why it was not changed after flashing with new rom and radio...?
Also can someone confirm that since I deleted the contents of the ExtROM should that give me more free space for storage when I reflash with a WM6.1 rom?
Thanks Again,
IrishLad

IrishLad said:
Hi,
I know you can change the boot screen, my question is more related to why it was not changed after flashing with new rom and radio...?
Also can someone confirm that since I deleted the contents of the ExtROM should that give me more free space for storage when I reflash with a WM6.1 rom?
Thanks Again,
IrishLad
Click to expand...
Click to collapse
Flashing a new ROM doesn't necessarily change the bootskin, when you flash an official ROM (e.g. one from T-Mobile say), it'll most likely flash the bootskin.
As for ExtROM, you need to flash an empty one, then run a program on the uni that unlocks and unhides the ExtROM, which will appear as another storage medium in file explorer.

How to get a Kaiser to display Chinese ?

Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.

Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too

you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn

well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support

1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)

Thank you very much.
I'm now downloading and trying the ways you pointed out.

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again

ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.

jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.

This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here

ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster

I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.

Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx

mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing

Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx

White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx

mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.

Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx

RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx