Help Cant Reach Boot Loader Mode - JASJAR, XDA Exec, MDA Pro ROM Development

my uni stuk at da screen where it says press 0 or x, my desktop pc tell me that usb device not recognized i try all method nothing cant switch on my phone to reach the boot loader mode so cant run mtty utility
i cant charge my battery also its not showing the orange light which comes when u put the uni to charge so i guess cant charge it
mtty not have usb choise
when i make hardrest the screen give me press 0 or x n whatever i press it jus goes blank after that dont go the boot loader mode
i have used the mtty utility earlier 1-2 times but this time i am not able to reach the boot screen so i cant use it
i tried the UNI_ExitBootloader.exe but that also not working
c
i try 2 rest an hard reset 1000000 time
i tried everything nothing working ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live

Related

Kaiser will not enter boot

Hi
the phone always displays smart mobility then it resets over and over again.
I tryed the way expalined on WIKI bot can't get it into boot screen.is there any other way to do this?I tryed a hard reset but it is all the same.
BR
hello
You can enter in boot screen mode only if you press Power and Camera buttons in the same time (but EXACTLY in the same time) with the phone turned off ....I've tried this for 2 days, 'till my wife came with her long nails and managed to press the two buttons in the same time...( maybe it sounds stupid but is true) ...connect the usb cable when you enter in boot loader screen ....and download the ROM image you want from ftp://ftp.xda-developers.com/Uploads/Kaiser/Roms/ and simple run it from windows
For me it works ok.
i tryed ...but still can't get it to enter boot
i am sure the button are pressed at the same time.Any other advice?
BR
UPDATE:
when it resets it enters in boot but just for 1/4 of a second then it goes back to SMART MOBILITY

Help Cant Reach Boot Loader Mode

my uni stuk at da screen where it says press 0 or x, my desktop pc tell me that usb device not recognized i try all method nothing cant switch on my phone to reach the boot loader mode so cant run mtty utility
i cant charge my battery also its not showing the orange light which comes when u put the uni to charge so i guess cant charge it
mtty not have usb choise
when i make hardrest the screen give me press 0 or x n whatever i press it jus goes blank after that dont go the boot loader mode
i have used the mtty utility earlier 1-2 times but this time i am not able to reach the boot screen so i cant use it
i tried the UNI_ExitBootloader.exe but that also not working
c
i try 2 rest an hard reset 1000000 time
i tried everything nothing working ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
Reply With Quote
mandy_bikerboy said:
my uni stuk at da screen where it says press 0 or x, my desktop pc tell me that usb device not recognized i try all method nothing cant switch on my phone to reach the boot loader mode so cant run mtty utility
i cant charge my battery also its not showing the orange light which comes when u put the uni to charge so i guess cant charge it
mtty not have usb choise
when i make hardrest the screen give me press 0 or x n whatever i press it jus goes blank after that dont go the boot loader mode
i have used the mtty utility earlier 1-2 times but this time i am not able to reach the boot screen so i cant use it
i tried the UNI_ExitBootloader.exe but that also not working
c
i try 2 rest an hard reset 1000000 time
i tried everything nothing working ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
Reply With Quote
Click to expand...
Click to collapse
Try to remove the SDCard and reset the device. if almost persist try the solution proposed in wiki thats says how to exit from bootloader mode.
one thing i just noticed i cant hard reset my phone, when i press the soft keys and reset button nothing happens when i soft reset it nothing happens then also but if i press and hold both the soft keys it lights up and show press o to restore default and x to continue.
whatever i click nothing happens screen goes all black again after that no boot loader mode where u get the serial on the top of the screen and version on bottom cant c anything at all can anyone help in me in making my uni work again or have i wrecked it
i tried mtty but it is not showing me usb coloumn tried exit bootloader but it also does not work it says cannot open usb port make sure usb connection disabled in active syn and make sure usb canle is connected properly
when i attach my uni the pc shows usb device not recognized
PLEASEEEEEEEE HELPPPPPPPPPPPPPPPPPP
Hi
When you want to flash a new ROM you have to remove your SD card. I had the same problem.
Remove it, go to bootscreen mode. Re-flash the ROM.
***Do not worry. These problems arise now and then***
i had done that without sd card and sim card still nothing happened
mandy_bikerboy said:
i had done that without sd card and sim card still nothing happened
Click to expand...
Click to collapse
Hi
I can not tell this is the problem, but what you are telling is somehow a usb break problem.
Try to get your exec to a repair center to have a look at it...

htc touch pro 2 blank screeN

here is my problem guys. i was trying to flash my htc touch 2 sprint it with Raphaelhardspl(wrong flashing) and in the process the screen went blank. i was trying to do it one more time and my PC is asking for qualcomm cdmd technologies msn driver, every time i connect the phone to my PC. i have tried it soft reset. and hard reset wont work. any suggestion will be thanks full. thank you. the main problem is that my pc wont recognize ??
WHOEVER solve my problem will pay 50 buck via paypal
The quickest way to brick your phone is to try to flash it with programs meant for other phones, which it appears you have done.( bricked )
Try putting it into bootloader and flashing stock rom , or try mtty.exe, but if your pc won't recognize it and your screen shows no life, it is probably toast. Does it at least have hardspl on it . ?
yes it does have hardspl. there have to be a way that my pc will recognized it. i think.
As denco7 said, have you tried getting into the bootloader mode?
Hold volume down and press the red button with your stylus.
Connect your pro2 to your PC and if it connects the word 'serial' will change into 'USB'.
If it does, your device is not bricked.
I suggest you flash Hard-SPL again, and make sure to follow the instructions exactly! Don't think you can do it just in a minute, just take your time.
Then flash another ROM by using MTTY (see here) and there you'll get some instructions.
Good luck!
it wont go to boot loader mode, when i connect it to the pc it begin to charge and noting happen , then suddenly the light go off and the pc detect a driver is missing quaccom etc. does any one know about that this driver.
I've had that before... that the MSM technology qualcomm **** is asking for a driver.
There's a driver replacement (used before mtty). You can try to install that; altough I don't think it will help.
If you can't get into bootloader your device is (probably) bricked.
What you can also try is getting your battery, sd-card and simcard out of your phone and leave it for an hour. Then put the battery only back, and try to boot.
Does your phone start when you press the start button? So do you feel a vibrate or somethin like that?
no it wont start but maybe by following that MTTY my pc read it, i will try it. . it doesn even bibrate it just that power light show when that phone its charging thats all.
thanks for you comment guys.
That's strange.
There's one last thing you could try: the ultimate hard-reset
Some time ago I bricked my diamond. I tried all available sofkey combinations.
Then, suddenly, my device vibrated like 3 tiimes very loudly.
It didn't still boot nor go into bootloader.
But after about 4 hours it booted!
I only don't know what the combination was... something like VOl UP + VOL DWN + lOCK BUTTON + RESET.
Just try some combinations, maybe it works for you.maybe not, but you could try it.

[q] help!!! I think i bricked my phone!!!!

Ok, so i went to flash an I9000 rom (Darkys) and planned on flashing hellraiser over it. OBVIOUSLY i did something wrong...it rebooted itself after i flashed the rom, and i didnt have a chance to flash hellraiser. It turns on to the samsung screen, but it stays there for about 2 seconds then this white line flashes and it just turns off. I cant boot into recovery and i cant boot into dl mode (That i know of...) please help i just got this phone 2 days ago
all else fails you can always by a Jig.
if you cant get into Recovery OR DL mode.....that maybe your only Option.
Try the following to enter DL mode:
Pull battery and reinsert. DO NOT hit Power.
Hold VolUp and VolDn at the same time
Insert the USB cable from your PC
This should enter download mode

My moto g 3g hard bricked.. help!

My phone bricked dead, It won't respond to anything, won't turn on and won't show it is charging even!
When I connect it to pc thro usb windows shows a device is connected then says "device is not working properly"
and every fast boot shows "waiting for device"
I tried everything, I don't know what to do.. can anyone help me please?
Thanks
Reinstall the pc drivers and try to put the phone in bootloader mode (press power+volume down for roughly 3 seconds.) If the phone doesn't boot into bootloader (fastboot) mode, I'm afraid you will have to send it to moto (as fastboot flashing firmware is taken as last resort).
Edit : You sure the usb port is fine? It might have been that the usb port got damaged and now the battery drained out.
Broadcasted from Zeta Reticuli
I think usb debuging is off... Thats why computer not recognizing....
Sent from my MotoG3 using Tapatalk
Your phone won't turn on? How do you expect to show on your PC if you can't even turn the device on? It sounds like either the battery or USB port is bad and the battery died so now it can't charge... Assuming of course you tried the normal stuff like cables, chargers, different ports, etc.
Similar thing happened to my phone I kept my phone overnight charging and in morning I tried to go to bootloader mode It took about 1 min to go to bootloader mode then after going to bootloader mode go to twrp recovery and reboot system and you are done remember try this whole process on charging your device if doesn't work still you will have to give it to moto hope it works
if your device is not responding when you press Power button, probably is hardware problem.

Categories

Resources