Related
I’ve seen a few people here and at least one person over at PPCGeeks who have this issue, but no one has posted a way to resolve it.
Here’s the issue: I’m running the new stock 3.56 ROM on my Sprint Mogul. I installed WMWifiRouter 0.91, then removed it in favor of 0.80 (I read it had some advantages over 0.91). I believe I then uninstalled 0.80 to reinstall 0.91 and then decided to give WMWifiRouter the finger. I guess it knew I wanted to abandon it completely as it won’t let me uninstall it now. I get the following error:
“Jorrit Jongma WMWifiRouter was not completely removed. Do you want to remove it from the list of installed programs?”
I click “Yes,” but the program still stays on the list. If I try to reinstall it, it says the installation was unsuccessful.
I’ve tried the suggestions I’ve seen which include leaving the wifi switch on during the installation/uninstallation and simply deleting the folders, but nothing helps. Is there maybe a registry edit I can perform to just tear the program from my Mogul by force? I deleted all references I could find by doing a search with Resco Explorer, but still get the same error. How did such a clean little program become so messy? If it wasn’t so flakey I’d continue to use it.
subhumanderelict said:
I’ve seen a few people here and at least one person over at PPCGeeks who have this issue, but no one has posted a way to resolve it.
Here’s the issue: I’m running the new stock 3.56 ROM on my Sprint Mogul. I installed WMWifiRouter 0.91, then removed it in favor of 0.80 (I read it had some advantages over 0.91). I believe I then uninstalled 0.80 to reinstall 0.91 and then decided to give WMWifiRouter the finger. I guess it knew I wanted to abandon it completely as it won’t let me uninstall it now. I get the following error:
“Jorrit Jongma WMWifiRouter was not completely removed. Do you want to remove it from the list of installed programs?”
I click “Yes,” but the program still stays on the list. If I try to reinstall it, it says the installation was unsuccessful.
I’ve tried the suggestions I’ve seen which include leaving the wifi switch on during the installation/uninstallation and simply deleting the folders, but nothing helps. Is there maybe a registry edit I can perform to just tear the program from my Mogul by force? I deleted all references I could find by doing a search with Resco Explorer, but still get the same error. How did such a clean little program become so messy? If it wasn’t so flakey I’d continue to use it.
Click to expand...
Click to collapse
why don't you post your request to the original WMWifiRouter thread instead?
cannot remove trial WMWifirouter from Sprint Mogul
I am having the same issue with removing trial verion 0.89 from my Sprint Mogul. If any one can help, I would appreciate it.
Do you have a file on the installed programs list named "Samsung 3_1_15"? If so, delete that and it should completely remove the program (that is something that gets downloaded with the router). That's what worked for me. If you don't, try downloading sktools to remove it, I've heard that works as well.
Good luck!
I have yet to see it posted so heres how to skip the MEGA BLOAT on the fuze.ATT tried VERY hard to prevent it this time around.
I have tried every screen from hard reset. From what Ive found this is the only way to do it.
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen(use your finger and have your stylus ready by the reset hole) hit the stylus reset. (if you see customization start your too late and must start over)(hard reset by holding volumedown and the button in the center of the scroll wheel while pressing the stylus reset)
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
10.run the Opera cab called WM6_PPC_HTC_Opera9_WWE.cab (only WM6_PPC_HT… shows up in File Explorer) or you won't have the Opera browser.
You now have no bloat and TF3D
You must also install the opera cab in windows for the internet tab to work.
but does everything work?
i found on my hermes that certain stuff didnt work properly if i went about it that way
lbhocky19 said:
but does everything work?
i found on my hermes that certain stuff didnt work properly if i went about it that way
Click to expand...
Click to collapse
So far yes
Ive been testing for an hour. All the cabs from customization are posted in the windows folder. T
he only thing you lose i see so far are the folders in programs. For all the bloat Ill gladly recreate some folders.
so this is supposed to get rid of the At&t tab in touchflo 3d??
because i did it an the tab is still there...or what exactly does it do?? 9IM A NOOB!!)
aruppenthal said:
I have yet to see it posted so heres how to skip the MEGA BLOAT on the fuze.ATT tried VERY hard to prevent it this time around.
I have tried every screen from hard reset. From what Ive found this is the only way to do it.
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen hit the stylus reset.
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
You now have no bloat and TF3D
Click to expand...
Click to collapse
If you have yet to see it posted, then how did you copy and paste it word for word from the thread that it's already posted in? Cute...
but everything else is loaded like MS voice command, the quickgps,etc?
any idea where I can find the tools that was under programs with att configured?
need to use the proxy thing
Nevermind I found them there in the windows folder
what/where is the "stylus reset"?
KevinACrider said:
If you have yet to see it posted, then how did you copy and paste it word for word from the thread that it's already posted in? Cute...
Click to expand...
Click to collapse
The thread with it in it word for word is a copy and paste from this thread.
In fact I am even quoted in it
Thanks though might wanna read before posting negative comments.
starstreak said:
but everything else is loaded like MS voice command, the quickgps,etc?
Click to expand...
Click to collapse
As far as I can tell we are getting everything else except the stuff you dont want by skipping customization.
If you want stock and know how to flash NATF's rom is a good alternative. He has done a good job of removing the junk permanantly. From what I have read his rom is pretty solid.
I will probably continue my tilt line of ROMs on the fuze soon. I always base mine off of ATT's most current roms and leave all ATT settings intact.
Does anyone know the name of the CAB for Opera in the windows folder? It does not start off as Opera. Thanks...
UPDATE: Found it.
Raspster said:
Does anyone know the name of the CAB for Opera in the windows folder? It does not start off as Opera. Thanks...
UPDATE: Found it.
Click to expand...
Click to collapse
Opera doesn't load if you skip the bloat. What is the cab called? I couldn't find it and ended up finding a newer version on this board and used that cab, but I would still like to know. It was driving me crazy.
jglev said:
Opera doesn't load if you skip the bloat. What is the cab called? I couldn't find it and ended up finding a newer version on this board and used that cab, but I would still like to know. It was driving me crazy.
Click to expand...
Click to collapse
It is called WM6_PPC_HTC_Opera9_WWE.cab. All you see in file explorer is "WM6_PPC_HT..." so it's impossible to tell what it is without running it. I installed Total Commander to find it.
southG said:
what/where is the "stylus reset"?
Click to expand...
Click to collapse
The reset is a small button on the bottom of the Fuze, to the right of the usb port underneath the headphones symbol.
Beat me to it... Yea, The title is too long and you don't see the opera part. WOW, what a difference when you follow theses steps. It even puts the YouTube app on the internet TAB. The fuze runs ALOT smoother and has WAY more RAM/ROM. Good find!
do I press reset when I touch the screen, or the moment I see something change on the screen from me touching it?
WHen it starts up, am I supposed to see a customization wizard? Or did I fail?
edit: failed.crap
starstreak said:
do I press reset when I touch the screen, or the moment I see something change on the screen from me touching it?
WHen it starts up, am I supposed to see a customization wizard? Or did I fail?
edit: failed.crap
Click to expand...
Click to collapse
Yeah the second you see the screen change you have to reset. Once you see the wizard you went too far. If you see it hard reset and try again.
Thanks for this info. I tried flashing some of the ROMs specifically the NATF ROM since I wanted to keep the AT&T theme but not some of the AT&T bloatware but one thing I noticed accross the board is that cellular video does not work. I have checked proxy and connection settings and managed to get MEdia Net to work but CV always fails. Opera states the fuze is not a 3G phone and PIE only shows XML codes. Alhtough I don't use CV much I still wouldn't want it broken. I suppose this is my alternative for now.
Ahhh, I love the internet and being able to find the answer to any question you might have haha. Thanks for the tip on Opera, I was definitely missing that.
About the only thing I can think of that was kinda cool from the AT&T pack was the Cellular Video. Can that be installed by itself?
Racenut said:
Ahhh, I love the internet and being able to find the answer to any question you might have haha. Thanks for the tip on Opera, I was definitely missing that.
About the only thing I can think of that was kinda cool from the AT&T pack was the Cellular Video. Can that be installed by itself?
Click to expand...
Click to collapse
Cellular Video is only a website and can be access through cellularvideo.cingular.com
Theres something called PT_BlackSCR.cab
I installed that too. Err..what was it? I'm guessing it was the ATT_tabbed TODAY theme? I forgot to check if that was there before I installed it.
Whenever my phone wakes up from a sleep or I end a phone call, three error messages pop up saying that I'm missing three different files.
Yesterday, I installed some weather apps to try out, but I forgot to backup my regs. So when I uninstalled them, they must not have cleaned up too well and still try to run!
Three errors are:
Cannot execute \program files\Outerdepth\KPWeather\KPWeather.exe
Cannot execute \program files\nrg\chomeminiweather\weather.exe
Cannot execute \program files\nrg\chomeminiweather\monitor.exe
I searched the registry and found some registry entries in the Mort process key. Deleted those. Error still persists.
There is nothing in startup like these. No program files to look for because the folders aren't there.
I just want my phone to go back to normal. Preferably without hard reset.
Please help this fool. :'(
EDIT:
Forgot to say, I'm using a Samsung Omnia i910. Upgraded to compact.net framework 3.5, if that is relevant.
Perhaps this would be more appropriate in each packages
thread?
EDIT:
Please refer to these links respectively
NRG Miniweather App: http://forum.xda-developers.com/showpost.php?p=3582908&postcount=792
Outerdepth Weather App: http://forum.xda-developers.com/showpost.php?p=3582982&postcount=132
Done with it.
I just decided that it was better to hard reset the phone. The trouble and hours I spent on this weren't worth it, and I just wanted to get back to enjoying my phone.
Maybe these posts will get some sort of exposure and have the problem solved so the next person can find it.
I went the same route and hard reset the phone as well. Oh well!
try reinstalling them and then uninstalling them using SKTools
oh.. and then perform a cleanup using SKTools
still..
.. after using SKtools on a Polaris (uninstall, cleaning up, in normal and safe mode, you name it) I still get the same annoying message.
is there any solution to this?
thanx
alex.
That annoys me totaly. SKTools don't fix the problem. I only could fix it with a dummy exe file. But don't have tested it. It would be nice if the coder of
NRG Mini Chome Weather 1.2.1 + Monitor BJ Version.cab
Click to expand...
Click to collapse
gives us more informations how to uninstall completly.
Never saw an app like that. No registry key, no startup files, but annoying error messages.
#4 - ADDED MY SOURCE FILES!!!! Just in case u wanna change something
Ok guys...here we go again I try my best to put some of t7he things i like into the same cab...looks huge...but looks nice Some of the best features without touching too much the rom. DISCOVER YOURSELF Is all I can say
1. Random contacts retouch
2. Volume retouch
3. M2D DJ Koa retouch and retouch with Landscape
4. workaround Honeycomb...DJ Koa retouch (best feature is with Josh 21198 v1 ...seems to be fast and skin works better)
5. Keyboard Skin
6. DJ Koa 6.5 Skin (i try to put big menus...but fixing)
7. ...some more tweaks specially on manilla
PS - I will keep adding/fixing things Hugs
Ai ai ai....people complaining about loosing data with this cab. Well..I tested pretty much times with different roms. In any case, please backup ur data before install and please: make sure you have enough space to install and work. And follow the proper steps down. Is easy. And please feedback with ur rom's so I can keep testing.
------------------------------------------
Pre-install:
YOU MUST HAVE A SDCARD!How to install?
1. DISABLE TOUCH OR M2D IN TODAY!
2. RUN CAB
3. DON'T LET IT SLEEP WHILE INSTALL!
More caps
Here some more caps...
Looks nice but how do we install two zip files?
Source files!
Ok my friends!!!! I decided to share with you guys the source files for this so that everything is clear If u feel u can change source.
I used Cabwiz to pack it. I FEEL THE Source!
1. Install cabwiz
2. Create a folder to cabwiz folder and unzip the inf into there
3. Unzip the other zips to same folder
4. Run ..\cabwiz "DJKOA M2D 1.00.4000.1903.inf" /compress
it will generate the CAB.
Cheers
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
thankssssssssssssssssssssssssss
Good stuff mate but this should be posted in Kaiser software section Anyway, going to have a spin at this.
piplewis said:
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
Click to expand...
Click to collapse
djkoa, this is probably because of a single file. Ussaully a dll will cause this. Some dll's don't like being installed via cab. They must be manually copied. Another problem could be that piplewis has a dll or file installed that can't be overwriten. Another usaully a dll problem. I've noticed some dll's, once you replace it, you can't replace it again. The work around I found is to rename said dll as .bak which will cause the ROM to use the original again and allowing the file to finally be replaced.
Overwise, great job, only ther suggestion. I thought about making 1 big cab myself, but realized large cab's are difficult to uninstalled. If the user changes 1 small thing, it won't uninstall and will cause them to need to hard reset. Have that problem with NeoTitanium. People change a registry or something and BAM, can't uninstall it.
piplewis said:
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
Click to expand...
Click to collapse
Same for me. Im really hoping we find a solution to this cuz this looks awesome. I dont have M2D installed though, i dont know if that matters.
drkfngthdragnlrd said:
djkoa, this is probably because of a single file. Ussaully a dll will cause this. Some dll's don't like being installed via cab. They must be manually copied. Another problem could be that piplewis has a dll or file installed that can't be overwriten. Another usaully a dll problem. I've noticed some dll's, once you replace it, you can't replace it again. The work around I found is to rename said dll as .bak which will cause the ROM to use the original again and allowing the file to finally be replaced.
Overwise, great job, only ther suggestion. I thought about making 1 big cab myself, but realized large cab's are difficult to uninstalled. If the user changes 1 small thing, it won't uninstall and will cause them to need to hard reset. Have that problem with NeoTitanium. People change a registry or something and BAM, can't uninstall it.
Click to expand...
Click to collapse
Pretty spot on when it comes to .dll You can make the the cab itself to step by step rename->copy it. Other than that its a ok project, one idea I thought of is whit youre project to make it more customizeable is to take advatage of one if the autoinstallers. And then make a folder whit all the cabs, if you make the whole SJABANG finish to go out of the box you can lateron change its contents aswell as the users themself.
I have 2-3 of theese setups myself whit payed content as stuff from lakeridge, SPB and so on. Making a cab is good training but not wery customizable in the loong run on this project IMO.
raiisak said:
Pretty spot on when it comes to .dll You can make the the cab itself to step by step rename->copy it. Other than that its a ok project, one idea I thought of is whit youre project to make it more customizeable is to take advatage of one if the autoinstallers. And then make a folder whit all the cabs, if you make the whole SJABANG finish to go out of the box you can lateron change its contents aswell as the users themself.
I have 2-3 of theese setups myself whit payed content as stuff from lakeridge, SPB and so on. Making a cab is good training but not wery customizable in the loong run on this project IMO.
Click to expand...
Click to collapse
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
drkfngthdragnlrd said:
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
Click to expand...
Click to collapse
Tricks of the trade ".bak reminds me of something "
Would just be better as seperate installs .cabs.
drkfngthdragnlrd said:
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
Click to expand...
Click to collapse
Getting the perfect setup is wery time consuming, its no secret that the order its installed, register strings overlap eachoter and so on will count for the final result. Reinstalling the cab just to have it removed from installed list doesnt mean you have a good uninstallation. Going from one setup to another whit several cabs when it comes to interface, its almsout inevitable that you going to hard reset to have a fresh installation.
My thought was that its easyer to update the package itself, not update the software on the phone
Ok, I disabled m2d and without soft resetting (after 1st attempt) tried to install again. This time it seems to have installed.
Just restarting now, will let you know.
*Edit*
Yup, seems to have installed fine now.
I can't uninstall......hardreset now
Hi, is it possible you can make this into a .cab.
piplewis said:
Ok, I disabled m2d and without soft resetting (after 1st attempt) tried to install again. This time it seems to have installed.
Just restarting now, will let you know.
Click to expand...
Click to collapse
Hmm, I think I am going to pass on this on for now. All brewed in like this is unlikly that im going to have a good installation IMO. Should be step by step whit whit atleast one reset as far as I could see (HTC HOME),. Good combination, no doubth. But to just gather everything in one big cab im not a fan of. Also I would take advatage of pre-xml in making of this
I dont mean to be critical in a bad way here, its good training and as I sad good combination. I didnt pop the setup.dll as I stopped looking after a minutt, clearly you havent used that much time on this mister Also this installation is expect upon that you have a SD card in phone upon installation (but who doesnt have that, but still a good thing to inform on).
I perform a remove it, run it and after about 5 minutes of it can not remove so I hardreset
after hardreset (keep in storage Kaiser) the entire all data on my storage end are lost, empty storage .... please help me,
So....anyone try it and check
sported said:
I perform a remove it, run it and after about 5 minutes of it can not remove so I hardreset
after hardreset (keep in storage Kaiser) the entire all data on my storage end are lost, empty storage .... please help me,
So....anyone try it and check
Click to expand...
Click to collapse
That is what happens when you hard reset the phone. All the data:contacts, messages, pictures, songs, etc. are lost. You should had used ppm backup (I think that is what its called) to save your contacts and messages on a sd card on computer.
dooyoo222 said:
That is what happens when you hard reset the phone. All the data:contacts, messages, pictures, songs, etc. are lost. You should had used ppm backup (I think that is what its called) to save your contacts and messages on a sd card on computer.
Click to expand...
Click to collapse
You probobly mean PIM backup and he can find it here: http://frifor.com/download/IBI/PIM_BACKUP_V2.8_MONX.CAB
After two weeks... and several soft resents and only two hard resets... I now have everything set up and working well and smooth on my TP2 (Sprint). All my email, preferences and setting are exactly what I want themn to be.
My question is. What is the best way to back ALL of this up. Is there a programs that can save this 'state' and created a sort of restore point; so that is everything goes kablooey, I can get the device back to this exact state easily? Freeware preferable, but not a must.
I know I am noob, but I am trying to learn so thanks. It was a long time coming and WinMo 6.1 is a so different to me that the Palm system I was using until now.
Please let me know... It is greatly appreciated.
Matt
As far as I know, you have 5 options
1) PIM Backup - http://forum.xda-developers.com/showthread.php?t=299705
FREE
Really good at backing up ALL your text messages, contacts, appointments, etc. It can run automatically if desired. I've had issues when trying to restore emails and email accounts to my phone, but those aren't that hard to setup without it.
2)Microsoft MyPhone - http://sn1-p3.myphone.microsoft.com/mkweb/Start.po
FREE
Service works well. It backs up your info (Text, contacts, appointments, email) to the "cloud". It will even backup your files too, like photos and songs. You can also have this run on a schedule as well. Also has tools to locate your phone if you lose it (GPS location, make your phone rings even if it's on silent) but you gotta pay for them.
3) Flexilis Mobile - https://beta.flexilis.com/
FREE
Same as Microsoft MyPhone, but it's all free. They're still working on the GPS location function for the TP2, however their "scream" function is pretty cool, even works of the phone is set to silent too.
EDIT: forgot to mention, I wouldn't advise setting up the firewall on this program, I've had issues when trying to connect to ANY wifi spot (even my home's) when the firewall is on.
4)SPB Backup - http://www.spbsoftwarehouse.com/products/backup/?en
$24.95
Haven't actually tried this one but from the looks of it, it can backup "System Data" which I think means system preferences.
5) Resco Backup - http://www.resco.net/pocketpc/backup/
$19.99
Looks like it will backup EVERYTHING, the new version will also upload your backup to the FTP server of your choice. Haven't tried this one yet either
Also I know there is a program floating around the Rhodium forums that will re-installed ALL your programs. I forgot the link though.
I use MS MyPhone and SPB Backup... SPB is pretty easy to use, but so is MyPhone, but with MyPhone there have been some glitches in the past (which I experianced, like the contact restore issue) but those seem to be resolved now at least ( I know I havent had the issue again since getting the new version). SPB costs money, MyPhone does not. Both are simple, and easy to use. I would suggest trying them all, find the one you like best and stick with it.
I use SunnySoft BackupManager 4.x.
This software will restore you to whatever point in time it was when you did the backup. This software can be customized to backup the whole device or just parts of it.
I tried SPB on previous winmo phones and did not like it.
I also have had no issues with getting the software from 1 phone to the other. All it took was an email with my new phones key sent to them to get a new code for the new phone.
+1 for SPB its worth the money backs up and saves everything.
Sprite Backup isn't bad. Used it a lot on my MotoQ9c with no issues.
huntm856 said:
Sprite Backup isn't bad. Used it a lot on my MotoQ9c with no issues.
Click to expand...
Click to collapse
Yeah, just make sure you use the same version for restore as you did while backing up. Tried to restore my roommates palm treo (a couple years ago) and the program didn't want to because it said that the version I backed up with was to old.
+1 on SPB Backup. And when they say it backs up everything, they mean everything. Data, apps, the works. Great program and well worth the money IMHO.
I've tried Sprite Backup but it gave me problems. I tried doing a backup, reflashed my ROM, and when I tried to restore the file wouldn't work. All my data was gone. So -10 for Sprite Backup.
Sprite works for me
I've used Sprite on my Wizard and on my Fuze/Raphael.
This is the copy I'm using now, copied from my Fuze, and it is working fine:
http://www.mediafire.com/?jnxk4wzojh3
One thing you might find is that it usually works best to restore to a device that is factory fresh, i.e. hard reset to factory specs, or to your base ROM whatever that is. If you have a stock ROM you may get an error when you try to run the restore file directly.
I keep a copy of the Sprite Backup.CAB on my storage card, and load it after the hard reset, then use it to open the backup file.
If you have a cooked ROM you probably can just run the exe backup file.
colorado_al said:
If you have a cooked ROM you probably can just run the exe backup file.
Click to expand...
Click to collapse
I am think about this... but I have not the first clue on how to flash a new ROM, where to find one that is right... is there a faq on this whole process.
I just want a nice stable system...
My vote is with SPB backup.
It makes backups on schedule, I do one every day, then automatically copies the backups to my desktop when I connect it by activesync.
Smooth, reliable, I've restored 1/2 a dozen times without a problem.
Worth the money.