I have yet to see it posted so heres how to skip the MEGA BLOAT on the fuze.ATT tried VERY hard to prevent it this time around.
I have tried every screen from hard reset. From what Ive found this is the only way to do it.
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen(use your finger and have your stylus ready by the reset hole) hit the stylus reset. (if you see customization start your too late and must start over)(hard reset by holding volumedown and the button in the center of the scroll wheel while pressing the stylus reset)
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
10.run the Opera cab called WM6_PPC_HTC_Opera9_WWE.cab (only WM6_PPC_HT… shows up in File Explorer) or you won't have the Opera browser.
You now have no bloat and TF3D
You must also install the opera cab in windows for the internet tab to work.
but does everything work?
i found on my hermes that certain stuff didnt work properly if i went about it that way
lbhocky19 said:
but does everything work?
i found on my hermes that certain stuff didnt work properly if i went about it that way
Click to expand...
Click to collapse
So far yes
Ive been testing for an hour. All the cabs from customization are posted in the windows folder. T
he only thing you lose i see so far are the folders in programs. For all the bloat Ill gladly recreate some folders.
so this is supposed to get rid of the At&t tab in touchflo 3d??
because i did it an the tab is still there...or what exactly does it do?? 9IM A NOOB!!)
aruppenthal said:
I have yet to see it posted so heres how to skip the MEGA BLOAT on the fuze.ATT tried VERY hard to prevent it this time around.
I have tried every screen from hard reset. From what Ive found this is the only way to do it.
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen hit the stylus reset.
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
You now have no bloat and TF3D
Click to expand...
Click to collapse
If you have yet to see it posted, then how did you copy and paste it word for word from the thread that it's already posted in? Cute...
but everything else is loaded like MS voice command, the quickgps,etc?
any idea where I can find the tools that was under programs with att configured?
need to use the proxy thing
Nevermind I found them there in the windows folder
what/where is the "stylus reset"?
KevinACrider said:
If you have yet to see it posted, then how did you copy and paste it word for word from the thread that it's already posted in? Cute...
Click to expand...
Click to collapse
The thread with it in it word for word is a copy and paste from this thread.
In fact I am even quoted in it
Thanks though might wanna read before posting negative comments.
starstreak said:
but everything else is loaded like MS voice command, the quickgps,etc?
Click to expand...
Click to collapse
As far as I can tell we are getting everything else except the stuff you dont want by skipping customization.
If you want stock and know how to flash NATF's rom is a good alternative. He has done a good job of removing the junk permanantly. From what I have read his rom is pretty solid.
I will probably continue my tilt line of ROMs on the fuze soon. I always base mine off of ATT's most current roms and leave all ATT settings intact.
Does anyone know the name of the CAB for Opera in the windows folder? It does not start off as Opera. Thanks...
UPDATE: Found it.
Raspster said:
Does anyone know the name of the CAB for Opera in the windows folder? It does not start off as Opera. Thanks...
UPDATE: Found it.
Click to expand...
Click to collapse
Opera doesn't load if you skip the bloat. What is the cab called? I couldn't find it and ended up finding a newer version on this board and used that cab, but I would still like to know. It was driving me crazy.
jglev said:
Opera doesn't load if you skip the bloat. What is the cab called? I couldn't find it and ended up finding a newer version on this board and used that cab, but I would still like to know. It was driving me crazy.
Click to expand...
Click to collapse
It is called WM6_PPC_HTC_Opera9_WWE.cab. All you see in file explorer is "WM6_PPC_HT..." so it's impossible to tell what it is without running it. I installed Total Commander to find it.
southG said:
what/where is the "stylus reset"?
Click to expand...
Click to collapse
The reset is a small button on the bottom of the Fuze, to the right of the usb port underneath the headphones symbol.
Beat me to it... Yea, The title is too long and you don't see the opera part. WOW, what a difference when you follow theses steps. It even puts the YouTube app on the internet TAB. The fuze runs ALOT smoother and has WAY more RAM/ROM. Good find!
do I press reset when I touch the screen, or the moment I see something change on the screen from me touching it?
WHen it starts up, am I supposed to see a customization wizard? Or did I fail?
edit: failed.crap
starstreak said:
do I press reset when I touch the screen, or the moment I see something change on the screen from me touching it?
WHen it starts up, am I supposed to see a customization wizard? Or did I fail?
edit: failed.crap
Click to expand...
Click to collapse
Yeah the second you see the screen change you have to reset. Once you see the wizard you went too far. If you see it hard reset and try again.
Thanks for this info. I tried flashing some of the ROMs specifically the NATF ROM since I wanted to keep the AT&T theme but not some of the AT&T bloatware but one thing I noticed accross the board is that cellular video does not work. I have checked proxy and connection settings and managed to get MEdia Net to work but CV always fails. Opera states the fuze is not a 3G phone and PIE only shows XML codes. Alhtough I don't use CV much I still wouldn't want it broken. I suppose this is my alternative for now.
Ahhh, I love the internet and being able to find the answer to any question you might have haha. Thanks for the tip on Opera, I was definitely missing that.
About the only thing I can think of that was kinda cool from the AT&T pack was the Cellular Video. Can that be installed by itself?
Racenut said:
Ahhh, I love the internet and being able to find the answer to any question you might have haha. Thanks for the tip on Opera, I was definitely missing that.
About the only thing I can think of that was kinda cool from the AT&T pack was the Cellular Video. Can that be installed by itself?
Click to expand...
Click to collapse
Cellular Video is only a website and can be access through cellularvideo.cingular.com
Theres something called PT_BlackSCR.cab
I installed that too. Err..what was it? I'm guessing it was the ATT_tabbed TODAY theme? I forgot to check if that was there before I installed it.
Related
Does anyone know if there is an application (EXE file) within WM6 or WM5 that executes the "programs" and "settings" list, without tapping the Start button?
Also, on a soft reset, how can you make a single application load everytime?
Thanks...
bradsnw said:
Does anyone know if there is an application (EXE file) within WM6 or WM5 that executes the "programs" and "settings" list, without tapping the Start button?
Also, on a soft reset, how can you make a single application load everytime?
Thanks...
Click to expand...
Click to collapse
Anyone? I am sure there is a simple solution that I am overlooking. With a little help here I can fix a couple of problems with an iPhone emulator that can be incorporated into any WM6 Rom. I am currently running this now, but these fixes would make it perfect, and would almost do away with the Windows Mobile today screen. I am pretty amazed with this so far, The new iPhone today screen perfectly mathes what you would see on the apple website, and I am not noticing any signifigant lag time between apps that are loaded this way.
To make an application load on a soft reset, just place it in the windows/start up folder or place a link to it in that folder.
bradsnw said:
Does anyone know if there is an application (EXE file) within WM6 or WM5 that executes the "programs" and "settings" list, without tapping the Start button?
Also, on a soft reset, how can you make a single application load everytime?
Thanks...
Click to expand...
Click to collapse
not directly.... they are linked to explorer.exe and the shell....and of course the registry.....if my memory serves me rigth.
faria said:
not directly.... they are linked to explorer.exe and the shell....and of course the registry.....if my memory serves me rigth.
Click to expand...
Click to collapse
Faria, memory cannot serve you right. You are already at 97% capacity and the only way to get the information you require is to do a soft reset at which point you will get down to 75%. Or in the alternation upgrade.....
Is this the emulator you are talking about?
http://forum.xda-developers.com/showthread.php?t=301517
Did you find out how to start the functioning of program from icon.
I cannot find the explorer.exe in the rom
samy.3660 said:
Did you find out how to start the functioning of program from icon.
I cannot find the explorer.exe in the rom
Click to expand...
Click to collapse
Nothing as of yet. Without recompiling the software, each button on the iPhone today screen requires an .exe file, executable, to launch that particular service or program. To make things easy, I wanted to know how to create an exectuable file that will launch contacts, programs folder, and settings folder, with these, the normal WM6 today screen would not be needed anymore.
So Far....
So far....
Wow, those screens look cool already
Any idea when a first beta will be ready (if you are gonna release it)?
matthijst said:
Wow, those screens look cool already
Any idea when a first beta will be ready (if you are gonna release it)?
Click to expand...
Click to collapse
I have figured out how to link to Outlook Contacts, I am just having troubles getting settings and programs to pull up. Wven with creating shortcuts to them
well if you want settings like for example the task manager then a call to this would bring it up:
ctlpnl cplmain.cpl,4,2
Didn't want to leave you hanging so I ran a quick search here to see if it has a list and here's something that should steer you in a direction...that is if this is what you wanted:
http://forum.xda-developers.com/showthread.php?t=289005
that doesnt help, you know how to add a shortcut to start start menu
Here's a similar app:
http://rychlicki.net/en/2007/04/01/174/
http://rychlicki.net/inne/res_ppc-custom.icons.zip
Clock doesnt work there though
Let me just begin by saying that you all are awesome. I am incredibly impressed you were able to get WM6 working on the Tornado. I have a TMobile SDA (USA). I used Andot's Perfect WM6 ROM to flash. I didn't have any problems other than a few spontaneous reboots after flashing the ROM. I do have a question though.
After flashing, I now cant get my T-Mobile button nor my review, play, and forward buttons(the ones that are on the same row) to work. I would like them to work with media player like they used to. I could give a rat's ass about the T-Mobile button, but it would be nice to be able to assign it or any of those other buttons to a specific function.
Is there a specific customization CAB I was supposed to install for the TMobile SDA (USA) to get those buttons working? How can I use or reassign those buttons?
Thanks in advance for your help!
Hello atarilynx,
I have your same phone, which is also identical to the sp5m.
go get phil's extras.zip from
http://forum.xda-developers.com/showpost.php?p=1417372&postcount=4
and install the sp5m button fix cab
after that, you can to into wmp and assign the buttons to do their normal tasks.
also, after applying that fix, the t-zones button will open to an ie search page.
Many thanks...
Thanks a bunch...that works for me. You all rock!
Maybe one other question...when I imaged my phone, after it was done, it would reset about every few minutes. Sometimes I would try opening stuff, and it would seem to lock up, then reset.
Things seem to be ok now... I have not had it reset on me once after the first few hours. Did others have that experience too?
Neither of the phones that I've flashed have had that problem.
Both of them being TMob SDAs.
I have no clue why your phone was doing that, hope it got that out of it's system!
actually if you guys notice, it still doesnt work. you will try and configure the fastforward button, but when you try to hold it down, it only sees it as a press, not a hold.
true, the hold and seek feature is lost from those buttons, but you can still do that with the joystick if you must.
I personally have no problem with that as I hardly seek through songs.
something else is still tweaked though, on one of my sda's, i did the button fix then installed the tcpmp shortcuts from mobile.surrealnetworks.com/SDAapps.htm
now the buttons do not line up at all with what they are supposed to do. I think the "previous track" button becomes the play button and whatnot.
maybe phil can come up with a better sp5m fix
or, you know, someone else who actually knows what's going on.
I need to sit down some evening and really dig in and figure out what exactly these fix cabs are doing.
I think you need to find the attribute for WMplayer which is used for seeking forward or backward, then save it as Long_AP#.lnk where # is the button number
karhoe said:
I think you need to find the attribute for WMplayer which is used for seeking forward or backward, then save it as Long_AP#.lnk where # is the button number
Click to expand...
Click to collapse
In the past, I have had poor luck with assigning a Long_AP command when there wasn't one already set for that button. Not sure if something needs to be added to the registry as well?
Otherwise, I would set long buttons for all sorts of apps :-/
Like, in Andot's rom, I love having the long home go to celetask.
Same, I tried to assign an attribute to long_ap, it did not work, why dont you copy the lnk files from AKU2 ROm ?
That is probably a good suggestion, tho, I still think there is probably more to it . . . I would try it out, but I'm moving in a couple days, and have priorities that must be attended to :-(
i think it has something to do with htcwmpplugin.dll, plus maybe sumthing to do with this registry i found it when i dumped the tmobile rom... and checked the rgu files
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\UIPlugins\{72F3E437-17E6-484E-9C96-13181D4039CB}]
"FriendlyName"="HTC Key Mapping UI Plug-in"
"Description"="HTC Key Mapping UI Plug-in"
"Capabilities"=dword:1
i havent tried most ,too lazy!!! hehehe!
as it has been explained in many posts in the past the htcwmpui plugin is for a homescreen wmp plugin and nothing to do with the buttons
oh ok sorry about that... will it have to do with keybddr.dll then?
What are you guys talking about "assigning attributes" to the long_ap#.lnk?
Are you talking about adding in a command line style switch to change the way the intended application will handle the shortcut?
actualy, i have followed these and othere forums for quite some time and i have yet to see if anyone has figured out how to get the media buttons working on roms were that feature does not come by default
Exitao said:
What are you guys talking about "assigning attributes" to the long_ap#.lnk?
Are you talking about adding in a command line style switch to change the way the intended application will handle the shortcut?
Click to expand...
Click to collapse
Its not attribute, its parameter/arguments
Yes ! thats what we are talking about
I have created a cab file for the same. but the problem of using the htcwmpplugin is that the keys are mapped differently. the internet explorer key is mapped to the previous button and the play key becomes the previous key.. which is a problem.. that's why i want to know which keypad drivers are being used. The keypad drivers used for tornado music or imate sp5m is a little bit different.
Try using it..
http://forum.xda-developers.com/attachment.php?attachmentid=45775&d=1186047418]
i think i got it... i dumpeed the t-mobile rom took the keybddr.dll folder and incorporated it into andots ppe v6. i also removed the keybddr.dll had in it...
after building it...
i then i copied the sp5m zip files (those short_ap1-4 .lnks) to my windows folder, installed the cab tejasphatak gave here... then it all worked...
the keybddr.dll folder
here is the file incase you guys want it...
iron1 said:
here is the file incase you guys want it...
Click to expand...
Click to collapse
i copied the files, then installed the cab, but it's still as if i only installed the cab. the back/reverse buttons works as play and hte play button works as forward and etc...
hello everyone, long time member of howardforums and just joined xda and find some very usefull info, thank you all. i ran into a small problem last night. i have a tilt , not flashed but i have installed the htc home screen and everything worked great. last night i tryed to install the touchflo program found in a few places in this forum and it didn't work but thats when the interesting stuff happen....after deleting all touchflo cab files and restarting the tilt every time at startup it gives me a warning " FTouchFlo.exe cannot be open, its either not signed with a trusted certificate or one of its components can not be found. try reinstalling or restoring file." ????? and now the icon that used to be under the clock for favorite people that would send me their pics so i can just one touch dial is GONE? tryed installing the cab for the htc homescreen again but the same....there is a music short cut that lets me launch the music player that wasn't there before? i downloaded the htc home plugin customisor and even when i set for 6 icons on the bottom of the clock it still just gives me 5?
at the end of the day i would like to have the touchflo program but its not a big deal if i dont, i would however really like to have the pic dialer back on my screen as its really convinient to dial my fav people with it.thanks in advance
try this for the favorite people tab
http://forum.xda-developers.com/showthread.php?p=1614132&highlight=favorite+people#post1614132
To get the favorite people tab back, delete this key:
HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial
i'm asuming this is what you meant? sorry but where do i find this key? thanks
bobcho10 said:
To get the favorite people tab back, delete this key:
HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial
i'm asuming this is what you meant? sorry but where do i find this key? thanks
Click to expand...
Click to collapse
Keys are in the registry. To access and change the registry you need a registry viewer/editor. There are many but for simple "everyday" use this is a good one:
http://www.phm.lu/Products/PocketPC/RegEdit/
Be careful though delete the wrong things and you'll end up needing a hard reset.
Mike
mikechannon said:
Keys are in the registry. To access and change the registry you need a registry viewer/editor. There are many but for simple "everyday" use this is a good one:
http://www.phm.lu/Products/PocketPC/RegEdit/
Be careful though delete the wrong things and you'll end up needing a hard reset.
Mike
Click to expand...
Click to collapse
thanks mike, sorry for the noob question but what do i do once i install this on my comp ? do i install on the phone as well and run the program or ? .....
bobcho10 said:
thanks mike, sorry for the noob question but what do i do once i install this on my comp ? do i install on the phone as well and run the program or ? .....
Click to expand...
Click to collapse
PHM downloads as a .MSI windows installer. So it will not install properly unless you have your device connected via active sync when you run the downloaded file. So connect your device via usb cable. Let active sync connect and update. Then while still connected run the installer download. During the process a message will pop up on your device. If a choice is offered it will be ok to install to storage card if you have one.
Cheers for now.
Mike
thanks guys , can anyone tell me how to delete .exe files? i still get warnings at start up that touchflo.exe and bio-something-.exe can not run because some files are missing.....thanks
So i purchased my Fuze on Monday, and its my first WM device.
Overall its a great device and i like it more than my iPhone.
Ive been recently trying to customize it and ive downloaded nice TF3D themes, and done some registry editting to change the sliding sound.
What i want to know is if there is another way to make the Fuze run and perform alot faster than how it runs out of the Box.
I did some of the performance TWEAKS that i found on a Touch Pro thread. and that worked. But is their anything else that you guys would recommend? Maybe deleting unused programs? or idk.
I dont really like, that there is some Lag when switching thru the tabs in TF3d, and the long waits for opening programs.
Mind you, that i dont want to go through the effort of installing a new ROM. Mainly because of the fact that i cant seem to find a perfectly good, tutorial on how to do this.
Thanks
1. Get rid of the bloat by doing a hard reset and then doing a soft reset as soon as you "press the screen to use the device"
Frees up a mega crap-load of memory and you dont have to deal with stupid software ATT tries to sell you.
2. Install Advanced Config 3.3
Increase system memory, enable HSDPA and some other features I cant remember)
3. Install Sushi's Diamond TF3D Config
You can edit TF3D all you want (tabs, programs,order,ect..)
1. Get rid of the bloat by doing a hard reset and then doing a soft reset as soon as you "press the screen to use the device"
Frees up a mega crap-load of memory and you dont have to deal with stupid software ATT tries to sell you.
I dont think i can do this anymore since i already turned on the phone, and i didnt get to do that when i FIRST booted it up...or is this still possible now?
2. Install Advanced Config 3.3
Increase system memory, enable HSDPA and some other features I cant remember)
I installed advanced config, and did some of the tweaks on another thread, but how do i "increase system memory" and wat would HSDPA do to my phones overall speed? or is that just internet speed?
3. Install Sushi's Diamond TF3D Config
You can edit TF3D all you want (tabs, programs,order,ect..)
This is how i installed custom TF3D themes
Alucard_11 said:
1. Get rid of the bloat by doing a hard reset and then doing a soft reset as soon as you "press the screen to use the device"
Frees up a mega crap-load of memory and you dont have to deal with stupid software ATT tries to sell you.
I dont think i can do this anymore since i already turned on the phone, and i didnt get to do that when i FIRST booted it up...or is this still possible now?
2. Install Advanced Config 3.3
Increase system memory, enable HSDPA and some other features I cant remember)
I installed advanced config, and did some of the tweaks on another thread, but how do i "increase system memory" and wat would HSDPA do to my phones overall speed? or is that just internet speed?
3. Install Sushi's Diamond TF3D Config
You can edit TF3D all you want (tabs, programs,order,ect..)
Click to expand...
Click to collapse
This is how i installed custom TF3D themes [/QUOTE]
1. You can hard reset and do it at that point.
2. HSDPA will not increase overall speed but it will improve internet.
Ok...having a slight problem finding what I'm looking for, but it looks like it might have been touched upon here, WITHOUT an answer for what I'm looking for.
1. Get rid of the bloat by doing a hard reset and then doing a soft reset as soon as you "press the screen to use the device"
Frees up a mega crap-load of memory and you dont have to deal with stupid software ATT tries to sell you.
Click to expand...
Click to collapse
Having had many different PPC phones, I knew from the getgo not to allow the customization to run. The problem with this is, the TF3D application is NOT installed before the customization, but is actually bundled WITH the customization.
I contacted HTC and AT&T about getting the software seperately...needless to say, sorry, we can't help you...reset and install the customization!!
So, what I am looking for, is the TF3D software for the phone, or someway to unlock it from the phone (if possible)?
pghguy1989 said:
Ok...having a slight problem finding what I'm looking for, but it looks like it might have been touched upon here, WITHOUT an answer for what I'm looking for.
Having had many different PPC phones, I knew from the getgo not to allow the customization to run. The problem with this is, the TF3D application is NOT installed before the customization, but is actually bundled WITH the customization.
I contacted HTC and AT&T about getting the software seperately...needless to say, sorry, we can't help you...reset and install the customization!!
So, what I am looking for, is the TF3D software for the phone, or someway to unlock it from the phone (if possible)?
Click to expand...
Click to collapse
TF3D is called manilla, search for it!
pghguy1989 said:
Ok...having a slight problem finding what I'm looking for, but it looks like it might have been touched upon here, WITHOUT an answer for what I'm looking for.
Having had many different PPC phones, I knew from the getgo not to allow the customization to run. The problem with this is, the TF3D application is NOT installed before the customization, but is actually bundled WITH the customization.
I contacted HTC and AT&T about getting the software seperately...needless to say, sorry, we can't help you...reset and install the customization!!
So, what I am looking for, is the TF3D software for the phone, or someway to unlock it from the phone (if possible)?
Click to expand...
Click to collapse
I posted how to get the TF3D to work without the customization in the Fuze How to skip the bloat thread. You have to open the windows directory with file explorer and install 3 cabs. Cant remember the names at this moment.
Heres the post
Wait...so let me try and understand this...
If one is to do a HARD RESET, and then do a Soft Reset when the "press the screen to use the device" pops up. Then TF3D will not be installed? and will have to be installed separately?!
TF3D is called manilla, search for it!
Click to expand...
Click to collapse
Thank you! This is my first time using TF3D. I've seen the options to install the custom ones on my Tilt, etc, but never felt brave enough to get that in depth with it.
I posted how to get the TF3D to work without the customization in the Fuze How to skip the bloat thread. You have to open the windows directory with file explorer and install 3 cabs. Cant remember the names at this moment.
Heres the post
Click to expand...
Click to collapse
Fantastic! Thank you!
Wait...so let me try and understand this...
If one is to do a HARD RESET, and then do a Soft Reset when the "press the screen to use the device" pops up. Then TF3D will not be installed? and will have to be installed separately?!
Click to expand...
Click to collapse
Correct....because AT&T LOVES to push useless crap on you hoping that you will click on the application and get hooked from there!
Alucard_11 said:
Wait...so let me try and understand this...
If one is to do a HARD RESET, and then do a Soft Reset when the "press the screen to use the device" pops up. Then TF3D will not be installed? and will have to be installed separately?!
Click to expand...
Click to collapse
No you just have to add the reg cab in the windows directory. See my previous post in this thread.
So today before work I installed the Kavana 6.1 rom onto my Dash. Awesome with the exception of the keypad not being mapped the way i was used to. So I read forums about this and decided to download the t9 mapping. I unzipped the files on my computer and transfered them into a newly created folder inside of the windows folder....thats where things went bad. Now when I hit the start menu no icons load up, only the name of the program or application, and when i attempt to select it, i am prompted "error opening the shortcut or locating the filename. In essence the only thing I can do on my phone is text, call, or utilize any feature which is on the home screen. The worst part is I cannot syn to my computer as the usbstorage.ink is under the start program I screwed up royally, and I could use some insight from anyone who might be able to help me. Thank you in advance.
sabiandrums3 said:
So today before work I installed the Kavana 6.1 rom onto my Dash. Awesome with the exception of the keypad not being mapped the way i was used to. So I read forums about this and decided to download the t9 mapping. I unzipped the files on my computer and transfered them into a newly created folder inside of the windows folder....thats where things went bad. Now when I hit the start menu no icons load up, only the name of the program or application, and when i attempt to select it, i am prompted "error opening the shortcut or locating the filename. In essence the only thing I can do on my phone is text, call, or utilize any feature which is on the home screen. The worst part is I cannot syn to my computer as the usbstorage.ink is under the start program I screwed up royally, and I could use some insight from anyone who might be able to help me. Thank you in advance.
Click to expand...
Click to collapse
Was the file a zip or a cab?
On further inspection I found that you can sync the phone from the home screen, so I tried installing the Kavana rom again, but it keeps saying there is no device connected. It shows up on "my computer" as drive F. You can explore folders on it and such but I would ultimatly like to figure out how to redownload this OS, and not screw it up lol. Again any help is greatly appreciated
dashmaster1000 said:
Was the file a zip or a cab?
Click to expand...
Click to collapse
It was a cab, but the unzip option was there so i did... is this my original error?
sabiandrums3 said:
It was a cab, but the unzip option was there so i did... is this my original error?
Click to expand...
Click to collapse
Yea! Its cool though! You can go into settings and select clear storage instead of re-flashing and it will restore it to new ROM state and much safer then just copy paste the cab file into you device or storage card and click on the cab and it will install and do all the work for you! A cab is just a program that is sett up to install itself! Biggest thing to learn here is, dont be discouraged, read alot and learn as much as you can about your device! I started with a Dash and moved on to a Wing, now I have a Tilt running on T-Mobile! And i I remember correctly, I unzipped and installed a cab once too!
Now I am starting to cook my own ROMs and its only been a few months! Sorry. Ramling. Just wanted to encourage you! Hope I helped you out!
dashmaster1000 said:
Yea! Its cool though! You can go into settings and select clear storage instead of re-flashing and it will restore it to new ROM state and much safer then just copy paste the cab file into you device or storage card and click on the cab and it will install and do all the work for you! A cab is just a program that is sett up to install itself! Biggest thing to learn here is, dont be discouraged, read alot and learn as much as you can about your device! I started with a Dash and moved on to a Wing, now I have a Tilt running on T-Mobile! And i I remember correctly, I unzipped and installed a cab once too!
Now I am starting to cook my own ROMs and its only been a few months! Sorry. Ramling. Just wanted to encourage you! Hope I helped you out!
Click to expand...
Click to collapse
Your post is definitely inspiring me, unfortunately I cannot access the clear storage feature from the home screen, its one of the things i need the start menu for. I know theres got to be a way around this... but at least i learned something new about cab files!
sabiandrums3 said:
Your post is definitely inspiring me, unfortunately I cannot access the clear storage feature from the home screen, its one of the things i need the start menu for. I know theres got to be a way around this... but at least i learned something new about cab files!
Click to expand...
Click to collapse
No problem, just do a hard reset, same as clear storage! Click this link and follow intructions!
http://www.mobileviews.com/blog/2008/05/12/hard-reset-my-t-mobile-dash/comment-page-1/
Oh and dont worry! This guy makes it seem worse than it is, its perfectly safe!
Here is another link, more thorough!
http://www.good.com/faq/17957.html
dashmaster1000 said:
No problem, just do a hard reset, same as clear storage! Click this link and follow intructions!
http://www.mobileviews.com/blog/2008/05/12/hard-reset-my-t-mobile-dash/comment-page-1/
Oh and dont worry! This guy makes it seem worse than it is, its perfectly safe!
Here is another link, more thorough!
http://www.good.com/faq/17957.html
Click to expand...
Click to collapse
Thank you Dashmaster! its getting late here on the East Cost so im going to try this tomorrow and ill post what happens...again thank you so much!
sabiandrums3 said:
Thank you Dashmaster! its getting late here on the East Cost so im going to try this tomorrow and ill post what happens...again thank you so much!
Click to expand...
Click to collapse
You are very welcome! Glad I could help!
dashmaster1000 said:
You are very welcome! Glad I could help!
Click to expand...
Click to collapse
so i got ansy and couldnt wait for the morning....I hard reset the device, and everything worked perfectly! Better still I installed the cab and now I have a sweet new OS which looks and functions amazing, and now has the full keyboard working! I can see why you have chosen the posting name that you did thanks a bunch and happy holidays!