Hi Guys,
First of all, I would like to apologize in advance for making a double post if this is one. But after spending over an hour reading the search results I gave up.
This is the deal:
I upgraded my ROM not to long ago after I got my kaiser back from repair (display was cracked). I installed the dutch shipped HTC ROM. All was working fine except I had some performance issues.
Well, anyway, I didn't have any connection with my provider when I woke up this morning. So I tried to switch off the phone, took the battery out and put it back in again and tried to start up the damn thing.
And now it's stuck in the bootloader with the following message:
----------------
KAIS130 MFG
SPL-1.0.lipof
CPLD-8
SERIAL
----------------
When I connect my phone to my computer the SERIAL message turns into a USB message.
I tried to connect with mtty.exe but it cannot open the USB connection.
Can you flash another ROM (Cooked or Shipped, doesn't matter) when your at the bootloader (tri colour) screen?
Thanks
Dave
Thanks for your reply!
I did this already, I tried to install another HTC shipped ROM. After upgrading, wich went smooth, it freezes again in de tri-color screen.
I'm afraid I'll just use up all the battery power cuz the indicator that the batt is charging also wont lit up.
So to answer your question, yes I can
Hi, Try hard SPL 1st and reinstall thsoe fine cooked rom. as long as your device is able to lunch tri-color screen. it is not a brick at all!
Taken from pof.
1. Download mtty.exe
2. Disable activesync (connection settings -> uncheck "allow usb connections")
3. Connect your Kaiser to PC using USB cable.
4. Open mtty, select USB port and click OK.
5. Hit ENTER twice, you should see the "Cmd>" prompt.
6. Type the command "boot", you should see something like this:
EDIT:
@k2againstmachine: HardSPL is installed, his SPL version is SPL-1.0.OliPro
EDIT 2:
Failing that do and "info 8" in mtty and then contact GSLEON3, He'll probably be able to help you, if you buy him a beer
Ta
Dave
Thanks Dave,
I did this, and well, it now gives me a white screen and every now and then the tricolor screen appears and disappears again.
See my EDIT2 point.
This is the limit of my knowledge. Post you info 8 here any how, just incase it rings any bells.
Also, have you tried this? http://forum.xda-developers.com/showthread.php?t=371154
Ta
Dave
Hmm, just a hickup I think. I tried it again and now it will start!
I can't thank you enough Dave. And ofc pof
No probs, just searching an best guess work on my part
Dave
did you try to plug the usb before turning it on ?
it works on mine...
Related
I was trying to unlock my at&t tilt and this is what happened:
I got to the tri-color screen but it didn't let me do anything after that.
This is what i see on the tri-color screen now:
.............................RUUNBH
KAIS1*0
SPL-1.56.0000
CPLD-8
I've tried to hardSPL, soft-reset, and hard-reset. but no matter what i do, the tri-color screen is still showing.
Please help!!!
Download mtty.exe
set the port to USB
plug in your phone
type: set 14 0
Then type: boot
You should see some output in mtty and your phone should boot..
Good luck!
-RT
RogueTrooper said:
Download mtty.exe
set the port to USB
plug in your phone
type: set 14 0
Then type: boot
-RT
Click to expand...
Click to collapse
where can i download mtty.exe?
I've also tried to intall the original at&t tilt but it failed at 1%.
any idea?
dadavotinh said:
where can i download mtty.exe?
I've also tried to intall the original at&t tilt but it failed at 1%.
any idea?
Click to expand...
Click to collapse
Here you go buddy.
If that doesn't work...Let me know!
dadavotinh said:
where can i download mtty.exe?
I've also tried to intall the original at&t tilt but it failed at 1%.
any idea?
Click to expand...
Click to collapse
Do you mean that you have tried to install the original AT&T Tilt ROM.
Try this one and let me know how it goes. Make sure that your USB connection in activesync is disabled.
http://rapidshare.com/files/5340369...adio_sign_22.45.88.07_1.27.11.31_Internal.exe
alltheway said:
Do you mean that you have tried to install the original AT&T Tilt ROM.
Try this one and let me know how it goes. Make sure that your USB connection in activesync is disabled.
http://rapidshare.com/files/5340369...adio_sign_22.45.88.07_1.27.11.31_Internal.exe
Click to expand...
Click to collapse
Thanks for your quick reply!!
i have trouble understading your instruction on running mtty.exe
yes, after this tri-color screen trouble, i tried to intall back to the original at&t rom and it failed at 1%.
dadavotinh said:
Thanks for your quick reply!!
i have trouble understading your instruction on running mtty.exe
yes, after this tri-color screen trouble, i tried to intall back to the original at&t rom and it failed at 1%.
Click to expand...
Click to collapse
Those went instructions that I posted but maybe I can help.
1.)extract the file mtty.exe to your desktop.
2.)Double click on the mtty.exe and look at the screen shot below to select USB.
3.) Now type in what was posted above.
mmm same problem here...
Dutty's V3 final (no AT&T) and now "rainbow screen of death"
I've downloaded mtty and disabled usb connection, but when I try to connect I read "USB port can not open"
HEEEEEEEEEEEEEEEEEEEEEELP
thx in advance
ps: already flashed with hard-spl... but only few days of working... and now the RSOD (rainbow screen of death)...
If I boot with usb (also earmic) plugged into, the Tytn2 boots
But... it can't be the solution...
leopardone said:
mmm same problem here...
Dutty's V3 final (no AT&T) and now "rainbow screen of death"
I've downloaded mtty and disabled usb connection, but when I try to connect I read "USB port can not open"
HEEEEEEEEEEEEEEEEEEEEEELP
thx in advance
ps: already flashed with hard-spl... but only few days of working... and now the RSOD (rainbow screen of death)...
If I boot with usb (also earmic) plugged into, the Tytn2 boots
But... it can't be the solution...
Click to expand...
Click to collapse
What does your Tri-Color Screen say (AKA RSOD)
alltheway said:
What does your Tri-Color Screen say (AKA RSOD)
Click to expand...
Click to collapse
KAIS130 MFG
SPL-1.0.OliPof
CPLD-8
Serial
and, for a moment, appears:
Loading
No Image File!
alltheway said:
Try this one and let me know how it goes. Make sure that your USB connection in activesync is disabled.
http://rapidshare.com/files/5340369...adio_sign_22.45.88.07_1.27.11.31_Internal.exe
Click to expand...
Click to collapse
Thank you, i got my phone to work again...phewww!!!
one problem is that when i turn my phone on, usually only the at&t logo pop up, now the at&t logo pop up with an additional message "TEST ONLY NOT FOR SALE".
anyone know how to make it disappear?
thanks
dadavotinh said:
Thank you, i got my phone to work again...phewww!!!
one problem is that when i turn my phone on, usually only the at&t logo pop up, now the at&t logo pop up with an additional message "TEST ONLY NOT FOR SALE".
anyone know how to make it disappear?
thanks
Click to expand...
Click to collapse
Yes I do. In my signature link it has a couple of splash screens "alltheway splash screens" that you can change too. Pick which one you like and it will change the splash screen. I am also including just the original AT&T Screen if you like. If you want send me a 240 x 320 image and I can make a custom splash screen for you as well. I'm glad you phone is up and running again, and I was able to help.
leopardone said:
KAIS130 MFG
SPL-1.0.OliPof
CPLD-8
Serial
and, for a moment, appears:
Loading
No Image File!
Click to expand...
Click to collapse
What kind of phone do you have TyTN II or a Tilt?
If you have Tilt download the ROM that I posted a couple of post up. If you have an HTC download this ROM and install it. Make sure you have your USB connections disabled in ActiveSync.
http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html
If that one doesn't work.
Try this one next.
http://rapidshare.com/files/5735914....405.0_22.39.82.00.b_1.27.04.15_Test.rar.html
alltheway said:
...If you have an HTC download this ROM and install it. Make sure you have your USB connections disabled in ActiveSync.
http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html
If that one doesn't work.
Try this one next.
http://rapidshare.com/files/5735914....405.0_22.39.82.00.b_1.27.04.15_Test.rar.html
Click to expand...
Click to collapse
thx for the roms!
I've htc pda
After install, why I need to have usb disable?
it's because I can't connect with mtty?
leopardone said:
thx for the roms!
I've htc pda
After install, why I need to have usb disable?
it's because I can't connect with mtty?
Click to expand...
Click to collapse
Yes you need to disable your USB connection in activesync for mtty to work.
alltheway said:
Yes you need to disable your USB connection in activesync for mtty to work.
Click to expand...
Click to collapse
ARGH! No way!
1st rom is ok but mtty doesn't work, while 2nd rom stop flashing at 39% (tried 3 times)
ME DESPERATEEEEEEEEEEEEEEEEEEEEEEE (not yet housewife... but...) LOL
Try This
I had the same problem with it not wanting to flash, the only way I got around it was to take the Ruu_Signed.nbh file that comes with duttys rom and rename it KAISIMG.nbh, format the SD, put the file on it, and hard reset the phone with only that file on it. Installed like a champ.
dadavotinh said:
I was trying to unlock my at&t tilt and this is what happened:
I got to the tri-color screen but it didn't let me do anything after that.
This is what i see on the tri-color screen now:
.............................RUUNBH
KAIS1*0
SPL-1.56.0000
CPLD-8
I've tried to hardSPL, soft-reset, and hard-reset. but no matter what i do, the tri-color screen is still showing.
Please help!!!
Click to expand...
Click to collapse
Hello,
I have the exact same problem for a tytn2, with the exact same output. ive run the mtty commands, it did the reboot, went to the initial config settings (clock, password, etc), then it installed the HTC customisations and then, after the automatic reboot, it returned to the Bootloader mode.
Any other things i can try on, eventually other mtty commands?
thanks
ionutz6 said:
Hello,
I have the exact same problem for a tytn2, with the exact same output. ive run the mtty commands, it did the reboot, went to the initial config settings (clock, password, etc), then it installed the HTC customisations and then, after the automatic reboot, it returned to the Bootloader mode.
Any other things i can try on, eventually other mtty commands?
thanks
Click to expand...
Click to collapse
surprisingly enough, it went ok after i tried another couple of times. It just rebooted normally and did not need any initial settings or HTC Customization, it just loaded the OS and I was then able to install Hard-SPL.
Thanks,
Ionutz
Dang.
Last night my ATT Tilt running Dutty's V4 just randomly went into tricolor (no text at all) mode and I can't get it to reboot at all. It was just sitting on the charger. Might be toast.
When I go into bootloader mode I get:
KAIS100 MFG
SPL-1.0.OliPof
CPLD-8
I've tried mtty with usb disabled in activesync and just get "usb not available"
I've tried flashing several ATT roms including the one in this thread and they all fail between 1% and 30% - then back to nothing but rainbows. I'm at a loss.
XP Pro machine.
Hey all, first post long time reader.
Please dont flame me, i have tried to search for the answer but seem to be going nowhere.
Is anybody getting the Error [262] while using KaiserCustomRUU.exe? I just flashed Dutty's DualTouch v4, that worked great! Now i am trying to flash the radio, i have heard good things about 1.27.12.17. It will not flash, I have followed the instructions over and over again. It gets to the point where it shows the completion bar, it gets stuck with 0%. I follow the instructions, pull the battery out and try again, no luck. I have noticed that during the process active sync goes from green to grey. (I think this is supposed to happen) But the odd thing is that the "Local Area Connection" (for the phone) in Windows XP Network Connection disappears. I am guessing this is my problem. Does anybody know what causes the phone to disconnect from the computer? Or am i doing something obviously wrong.
Any help is appreciated.
also - after it locks up at th 0% screen, and after i receive the error 262, i then unplug the phone from the computer. when i do this, windows makes the sound of a USB device getting unplugged. so does that mean i really didnt loose connection, and the error 262 is due to something else?
Did you use Hard SPL Before flashing.Is a must to not brick your phone.
http://forum.xda-developers.com/showthread.php?t=334679
Read carefully and will be OK.
Yes i have used HardSPL. I have already flashed with Duty's DualTouch ROM, and it WORKS. It was really easy and painless. For some reason I can not get the radio to flash. From my understanding, HardSPL only needs to be done once. That changes the bootloader, i think? Either way, I already did the HardSPL, flashed the ROM, just want to change the radio now. As the instructions said, this can be done after I flash the ROM using CustomRUU. Any thoughts?
I am going to go ahead and try to flash a custom flash screen. Will post back results
I tried using the CustomRUU to flash Kaiser with new splash screen, but no luck. Same error as before. Good news is that the phone still works!
If you are shure about Hard SPL (you can check again if is rited OLIPOF) "Hold Camera + Power buttons together and reset with stylus"-to enter in Bootloader and check again.
If is correct I sugest to reflash with original HTC Rom (wich include radio ) and after that start again with HardSPL --- Radio --- ROM upgarde
For hard spl http://forum.xda-developers.com/showthread.php?t=334679
For original and other info http://forum.xda-developers.com/showthread.php?t=332246
and one of the best link for reverting http://forum.xda-developers.com/showthread.php?t=335568
Good luck !!!
ok so i go into bootloader, and i get
KAIS1*0
SPL-1.56.0000
CPLD-8
i had followed the insructions from this thread - http://forum.xda-developers.com/showthread.php?t=334679
- HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)
looks like i did something wrong? it does not say OLIPOF
any ideas? can i just do it all over again, and be safe?
thanks for your help.
You had some luck to flash cooked ROM without Hard SPL.Be more carefuly and read .Those guys work for us to be protecyed from breaking our phones
yes but read carefuly:
Please make sure ActiveSync is enabled (GREEN icon in systray)
and hit ENTER to start...
Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...
Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...
Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...
Process is finished, congratulations!
I see what you are saying. So some how I managed to just flash on the JumpSPL, and bypass the last steps of flashing HardSPL?
So now I should follow http://forum.xda-developers.com/showthread.php?t=354061
do step - "if you want to flash a hardSPL then run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC"
or do you suggest i just try to install HardSPL over again.
damn i suck, i thought i was being careful.
try Hard SPL but follow the instruction and don't hurry wait for every message from that window
That thread is just in case your phone don't enter in bootloader
will do, thanks for your help!
its definetly not my first day using a computer, flashing ROMs, etc. damn i feel like a complete newb
hey it worked. thanks for your help. if you are ever in chicago, PM me. i owe you a few beers.
No problem .Glad can help.
Guys,
3 days after my first attempt to flash a rom (beside the beatiful palms very long ago).
My first attempt stuck at 19%. After that I stuck in the three color screen. I thought it was a brick now. After searching the forum I could give my kaiser a second live through mtty and 2 commands. yeeh.
But after that every new attempt to flash the three color screen did not appear. When I forced a three color screen (through the camera button) I of course got a connection error.
I'm sure that I'm do something wrong, but I can't live (as a meaning, not for real )with the Idea I cannot put another rom on my kaiser.
I also tried jumpSPL.156, but that won't start on my device (complaining about certificates and or missing components, but in dutch language)
device information
vario iii
rom 1.56.114.4
date 9/1/07
radio 1.27.12.11
bootloader
KAIS130
SPL-3.03.0000
CPLD-8
Hope someone can tell me the right direction.
Regards
Chris Gradussen
These
from the jumpspl 1.56 thread:
jockyw2001 said:
Notes:
1. if when running a JumpSPL an error is shown try to application unlock your device first with SDA_ApplicationUnlock (you must run this on PC with an activesync connection via USB cable). If you still get errors you need to hard reset your device (power off, keep both left and right navigation keys pressed and power on)
Click to expand...
Click to collapse
I hope u'll find a solution in this link:
http://forum.xda-developers.com/showthread.php?t=354061
Thanks,
The hard reset solved evertything!
ok this is the wierdest thing ever. Yesterday I soft reset my phone (which was flashed to HardSPL and SuperCID and the Hyperdragod II rom about 2 weeks ago) and it now only goes to the bootloader screen. I ran mtty and did a boot command and the phone boots! But as soon as I softreset it goes back to the bootloader screen. Please note it wasnt a bad flash or anything because since I flashed 2 weeks ago my phone has worked 100% fine, soft resets and everything worked. I tried flashing to the original Kaiser bootloader, I flashed back to the original HTC rom and it still does this. One thing I noticed is that when I use mtty to boot and plug in my phone via usb my Windows XP PC doesnt start activesync, windows says it cannot recognize the plugged in usb device! However in tricolor mode I can still flash 100% so I dont think the usb port is defective.
same here..
the phone was hanging at night... wanted to reboot.. and tricolor..
Now I am using it for months.. an something it boots ok and sometimes I have to use MTTY or waiting without the battery in it for 10 min solves it sometimes to.
gone install 6.1 now.. hope it fixes it.
what does it display at bootloader screen?
sorry to jump in, but mine's started doing this today.
I had it flashed with 'Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06', which seemed to be working OK.
Then I soft reset it earlier today and got to loading my tday screen, screamed the battery was dead (it was nearly fully charged) and turned off.
I turned it back on and it was as though it was booting after the soft reset, or like I'd taken the battery out (I hadn't).
I couldn't get this to change, so I flashed it with Sleuth v3.0, one ive used very successfully before - now it only shows the tri-colour bootloader screen, with the following details:
KAIS130 MFG
SPL-1.0.0.oliPoF
CPLD-8
USB
Anyone know what I can do?
Thanks in advance
'tunes
Do the letters RUUNBH appear anywhere on the screen. LOOK AGAIN!
If so I can help easily, if not It'll take a little homework on your part. Let me know.
the exact text from the bootloader screen is:
KAIS130 MFG
SPL-1.0.OLIPOF
CPLD-8
Down the bottom it says Serial, or USB if it's connected to my PC.
(these may have changed from earlier, ive been trying all sorts to get this going properly!)
Thanks for your help
mad_tunes said:
the exact text from the bootloader screen is:
KAIS130 MFG
SPL-1.0.OLIPOF
CPLD-8
Down the bottom it says Serial, or USB if it's connected to my PC.
(these may have changed from earlier, ive been trying all sorts to get this going properly!)
Thanks for your help
Click to expand...
Click to collapse
I answered you in the other thread. Use one thread for correspondence, we don't need 15 different threads & posts about the same thing.
Help!
I have the same problem descripted in this thread but I wasn't able to find the other thread you are talking about with the answer... Is there anybody here who would help an unlucky tytn2 owner? Thank you so much... I'm waiting for you!
If the answer is one this site already I apologize to everyone but I have been searching for 3 days now and no joy.
I will try to keep is short and simple.
I have been flashing for the last year now and have never had trouble until now. Flashed Duttys ROM released on June 5th I believe. Went great but still had old HardSPL on my phone. Followed the steps to flash latest SPL 3.29 and it never took. As a matter of fact something happened to the USB and my pc was unable to recognize the device. So I was stuck for the moment and had to leave that way until I had more time.
Received a phone call and when I hung up it went to white screen with call graphics at the bottom, missed call, received call, etc. I soft reset the phone and then the Tri-Color screen came up and this is the info:
KAIS130 MFG
SPL-1.0.0lIPof
CPLD
I am assuming this is the first HardSPL that I loaded. So then I preceed to flash via SD and it says that the flash completed and was successful. However when I soft reset the phone goes back to the Tri-Color sceen and does not load the image I just flashed.
Anyone have any ideas how I can get this phone working again? I am open to any and all suggestions.
Thank you in advance
does the bootloader show ruunbh on top?
ok this should be an easy fix! the poster above asked the right question!
lets start from scratch now though ok,
-first download SSPL.KAIS and save it to your memory card.
- Download Which ever hardSPL you would like to use.
- run SSPL.KAIS from SD card and then flash New HardSPL, check to make sure it flashed right by going into bootloader should say what ever SPL you just flashed.
- If that flashed correctly then proceed to flashing the HTC WM6.1 shipped ROM, which can be found on the forum! Make sure its a NON-cooked rom...
- If that flashed correctly then pick which ever custom rom you would like and flash that, make sure that flashed correctly and if so your done
Austinsnyc,
Thanks for the speedy reply. Sorry just a few questions and one statement.
The phone is in the Tri-Color screen state constantly. The only way I can load the bootloader is if I rename a ROM to KAISIMG.nbh. Then is something akin to ROM, radio, etc and when that flashes they will have an OK next to them. Alright with that said a few questions.
Do I have to rename the SSPL.KAIS file, it does not run as is? When loaded on the the card, Tri-Color comes up and then for a brief second is says, Loading.....No Image File.
Do I load both files on the card at the same time and do I have to rename them? i.e. KAISIMG.nbh
Thank you for your help
thesire said:
does the bootloader show ruunbh on top?
Click to expand...
Click to collapse
No it doesn't. I will say KAISIMG.nbh, the ROM I renamed to load. Then is list all the features of that ROM, i.e. OS, SPL, radio. I flash it and it says success but still will not load.
Thank you
culleyps said:
No it doesn't. I will say KAISIMG.nbh, the ROM I renamed to load. Then is list all the features of that ROM, i.e. OS, SPL, radio. I flash it and it says success but still will not load.
Thank you
Click to expand...
Click to collapse
MTTY
cmd>set 16 0
cmd>boot
Can MTTY be run form the SD card?
I didn't clarify so well, I cannot use usb connectivity to the PC. Everyting needs to be done off the SD card.
Thank you
culleyps said:
Can MTTY be run form the SD card?
I didn't clarify so well, I cannot use usb connectivity to the PC. Everyting needs to be done off the SD card.
Thank you
Click to expand...
Click to collapse
okay read more about mtty for clarrification. as long as it says usb when u hook up to computer in bootloader u should be fine. but first read on mtty before running cmds.
thesire said:
okay read more about mtty for clarrification. as long as it says usb when u hook up to computer in bootloader u should be fine. but first read on mtty before running cmds.
Click to expand...
Click to collapse
thesire,
I will research the this more. It does say usb on the phone with plug in otherwise when unplugged it says serial. When plugged in I can't see usb in the drop down in MTTY. I will keep reading.
Btw, it now says RUUNBH in the top right hand corner.
Thanks
culleyps said:
thesire,
I will research the this more. It does say usb on the phone with plug in otherwise when unplugged it says serial. When plugged in I can't see usb in the drop down in MTTY. I will keep reading.
Btw, it now says RUUNBH in the top right hand corner.
Thanks
Click to expand...
Click to collapse
that means you have bad data blocks which can also be cleared using mtty.
I must be very thick, I can't get MTTY to connect. Every time I plug in the USB to my Vista OS pc is says it can't recongize the device and it has malfucntioned. I know the USB is working, it was up until I was having this problem at least.
So I start MTTY and look for USB in the drop down for Port but only COM 1 & 2 show up.
So any other suggestions you or anyone else may have is greatly appreciated.
Thanks for your patience
with Vista you need to use Mtty 5.13 which can be found in the FrankenKaiser radio from hell thread. There is also a guide on how to install the old XP drivers to WindowsMobileDeviceCenter that helps a bunch with USB issues. Also I think you miss understood me the tri-color screen is the Bootloader screen!!!
USERNAME said:
that means you have bad data blocks which can also be cleared using mtty.
Click to expand...
Click to collapse
I don't think it means bad blocks for sure.
Ok. I have read just about everything I can find on MTTY, old XP drivers (which I already have installed) and I still can not get anything to work. When I plug in the phone via usb, pc says it cannot recongize the device and it must have malfunctioned. I have tried MTTY 5.13 numerous times and still cannot get usb to show up and have been unseccessful with all my attempts to connect via a COM port.
Is there any place in NYC, Brooklyn or Queens that I can take this phone too and someone with more experience can fix this for a fee of course? I just and need to get my phone working again.
So I have another question since I have been unable to get anywhere with the dang thing.
I am unable to get my laptop/pc to recognize the phone, I can't even get drives to load. Been searching and reading and still looking for a solution to this issue. If you know where is answer is in this forum could you please point me in the right direction?
Aslo, if someone is willing to spend the time with me to solve this issue get the phone running again, I will be more the happy to donate generously.
I think this can be solve quickly if I could get the time with someone.
For the folks that have replied, I can't thank you enough it has been a great learning experience.
Thanks
Same problem here. Please help!
I am having exactly the same problem. PANIC!
I am a complete noob to all this, but managed to flash Duttys Rom.
(Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16_27 [FIX])
I was incredibly pleased with the results.
The phone ran better than ever till this morning. The sound stopped working, I soft reset and now I cant get past the tri-coloured (boot loader ?) screen.
KAIS130
SPL-3.29.Hard
CPLD-8
SERIAL
I cant hard reset, it just goes back to the tri-colour screen.
Help!
If I am not being clear or more info is needed please let me know.
5manarmy said:
I am having exactly the same problem. PANIC!
I am a complete noob to all this, but managed to flash Duttys Rom.
(Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16_27 [FIX])
I was incredibly pleased with the results.
The phone ran better than ever till this morning. The sound stopped working, I soft reset and now I cant get past the tri-coloured (boot loader ?) screen.
KAIS130
SPL-3.29.Hard
CPLD-8
SERIAL
I cant hard reset, it just goes back to the tri-colour screen.
Help!
If I am not being clear or more info is needed please let me know.
Click to expand...
Click to collapse
Does it say RUUNBH in the top right corner?
Hi.
All I can see on the screen is as follows.
------------------------------------
KAIS130SPL-3.29.Hard
CPLD-8
Serial
------------------------------------
I have absolutely no idea where to go from here.
Cold sweat....
5manarmy said:
Hi.
All I can see on the screen is as follows.
------------------------------------
KAIS130SPL-3.29.Hard
CPLD-8
Serial
------------------------------------
I have absolutely no idea where to go from here.
Cold sweat....
Click to expand...
Click to collapse
The best thing for you to do is contact GSLEON3 to see if he can help you out.
Thanks for your response.
I somehow seem to have gotten somewhere.
I just repeatedly kept trying to hard re-set, taking the battery out, connecting USB.... and then it hard-reset.
They say the definition of insanity is doing the same thing and expecting different results.
I wonder if you can recommend a stable ROM? I love the speed and battery life of the one I installed but dont like the idea of being between meetings and having a phone in limbo.
Thanks again.