Database Info

How do I make a button 'Voice Record' properly?

In the cooked ROM I was running on my 8525 the PTT button was set so press and hold ran the notes app in recorder mode and recorded until I released the button.
It seems to be a fairly common feature that about every *other* smartphone I buy has... And all the older ones and PDAs had it on their dedicated record buttons.
I just got a Tilt and did the regedit so I can assign the PTT button, but how do I make a press and hold start recording and do it until released? I can't figure out what link (or otherwise) was being called on my 8525... The closest I came was finding a Record.lnk in Windows\AppButtons but that's not it, because the link is bad on both my 8525 and the Tilt...
Strangely the Tilt comes with a new HTC app called voice recorder, but I don't see any real point in it or way to make it record like I want.

Nothin'? I know people have figured it out because it was added back to the Black Majik WM6 Rom I used on my 8525...
Made it so easy to record a quick not about where I parked or something to check on at word...

Try using a third party program like ae button plus or a freeware program there are many out there

TheCritic said:
In the cooked ROM I was running on my 8525 the PTT button was set so press and hold ran the notes app in recorder mode and recorded until I released the button.
It seems to be a fairly common feature that about every *other* smartphone I buy has... And all the older ones and PDAs had it on their dedicated record buttons.
I just got a Tilt and did the regedit so I can assign the PTT button, but how do I make a press and hold start recording and do it until released? I can't figure out what link (or otherwise) was being called on my 8525... The closest I came was finding a Record.lnk in Windows\AppButtons but that's not it, because the link is bad on both my 8525 and the Tilt...
Strangely the Tilt comes with a new HTC app called voice recorder, but I don't see any real point in it or way to make it record like I want.
Click to expand...
Click to collapse
You might want to follow my articles (even past ones); in the Sound Recorrding Bible, I explained it's Notes that you must look for. In Settings / Buttons, it's denoted as "Record". Just assign it to any hardware button and you're set.

scousemartin said:
Try using a third party program like ae button plus or a freeware program there are many out there
Click to expand...
Click to collapse
Not needed - the basic OS supports this. Albeit, speaking of the button enhancers you've mentioned, you will want to read my latest Button Enhancer Bible.

Record isn't listed in the list of available programs to launch on a Press and Hold for button 6.
I can see it on my XV6700 assigned, but on the Tilt it isn't in the list ...

Proto732 said:
Record isn't listed in the list of available programs to launch on a Press and Hold for button 6.
I can see it on my XV6700 assigned, but on the Tilt it isn't in the list ...
Click to expand...
Click to collapse
Now I understand what you mean. I've upped Record.lnk for you to http://www.winmobiletech.com/sekalaiset/Record.lnk . Just put it in AppButtons and, if it can't be seen from Settings / Buttons, \Windows\Start Menu\Programs

Thanks for the assist.
I did have a Record.lnk in the AppsButtons folder, but the shortcut indicated it was pointed at a program called: HotVoice.
I copied your link to both locations and was then able to assign Record to Press & Hold for Button 6.
Thanks again.

Glad it worked

The strange thing is, the broken Record.lnk in Windows\AppButtons, is ALSO broken on my 8525 but the functionality still works there somehow...

Thanks for your help! It didn't work at first for me, especially just clicking on the link... but once it showed up in the recent items in the start menu it showed up in settings|buttons and I was able to assign it to button 6 (press and hold). WORKS LIKE A CHARM NOW Even still seems to work after deleting it from Start Menu | Programs!
It'd be great if somebody could make a cab for 8925/Tilts that strips PTT and makes button 6 work, fixes this file and makes comm manager the default for button 6 press and record the default for press and hold... do it for the newbies... I'm no newbie (Started w/ MPX200... R.I.H.) but it took me a while to get it right (and the last step was iffy).
THANKS AGAIN though!!

Menneisyys said:
Now I understand what you mean. I've upped Record.lnk for you to http://www.winmobiletech.com/sekalaiset/Record.lnk . Just put it in AppButtons and, if it can't be seen from Settings / Buttons, \Windows\Start Menu\Programs
Click to expand...
Click to collapse
I've tried this fix and have one question. After installing the link when I press and hold the button it opens notes not voice recorder. It works but it's opening the wrong app. Any way to fix this?

Raphael hardware keys, remapping?

Has anyone come up with working solution for mapping hw keys?
I found this thread on Diamond, but no help:
http://forum.xda-developers.com/showthread.php?t=398280

I am using AEKMap to enable both latin/cyrillic input on my TP's hw keyboard. You may google it and give it a try.

There is no need for additional software, just follow this post and you'll get the answer. Worked for me.

Try AE Button Plus.
B.

I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).

Taajuus said:
I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).
Click to expand...
Click to collapse
And that is EXACTLY what i also want to know....
The total lack of hardware-keys on this device is already disturbing enough, but being locked out of the option to remap any of them is truely horrid...
Anyone know of any reg-hacks maybe?

I've got Spb PocketPlus 4 installed btw, and it's got a button mapping function as well...
But when i go into the buttons map, some weird black icons appear with no name attached to it. Can anyone make anything of this? As you can see i've been able to map one thing only: the Spb close-button-contex-menu, which allows me to switch task KW-buttons only....
But this is not enough for me, i need ALT-TAB aswell and off course a VoiceCommand button.
And regrettably the Rapael doesn't have that many HW keys to start with...

I want also to use Home/Back buttons for different purposes,but I didn;t found a solution yet.

Gotten a step closer to what i really need over this weekend:
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
So far, this setup is to my satisfaction, and after two months of use this phone finaly behaves completely the way i want it to...

Hi, guys.
See my post here:
http://forum.xda-developers.com/showthread.php?p=2743845#post2743845
Hope this helps!
Cheers.

helped realy much !!! big thx for that nice instructions

You're very welcome, tk_berlin.
You be sure to let me know if anything in there doesn't make sense or you need any help with it.
Cheers from Canada!

ah cool to see a reply that fast ,)
hmm u got any further with finding out how to set the home button and the backwards button ?
Since the other htc user ,) wrote
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool

ah cool to see a reply that fast ,)
Click to expand...
Click to collapse
Lol. I was on my machine all morning and had XDA open in one of my tabs.
Yes, you can map practically any button in AEBPlus no problem.
hmm u got any further with finding out how to set the home button and the backwards button ?
Click to expand...
Click to collapse
AEBP will also *learn* any keys it doesn't have. So you could use the "Add Button" option, press your Home key, and away you go.
The way I have it set up, holding down the phone key will activate voice command (default behavior).
But remember, assigning commands to the Home or OK buttons (that "Back" button is actually an "OK" button) doesn't unmap what they normally do so you will always go home first and then it will perform <x>-function that you assign.
Personally, I don't like to program the Home or OK buttons because I find that they are "trickier" to press. What I mean is, if you tap the OK button near it's center or close to the left, it doesn't register a press. If you tap it sort of with the long part of your thumb (which is more natural when holding the device in one hand), it registers it. I've tried this with two TP's now and the button behaved the same way on both. Due to this, I find it unreliable to map anything to it.
In any case, as I mentioned earlier, the Volume buttons, Phone and End keys will be unmapped once you attach AEBP to them but the others will not.
Oh -- I forgot to mention, you can map the directional pad as well if that is your thing.
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool
Click to expand...
Click to collapse
It does work, but it sends an OK command first.
I wrote a little utility for hard-coded buttons such as these for another Pocket PC I had (an ASUS P527) called "DoNothing.exe" but we can't apply that work-around here. What I would do is replace the EXEs of apps the hardware keys called with my DoNothing.exe, but in the case of the TP, we definitely don't want to replace START.EXE (which I believe to be the likely EXE (haven't tested this)).
If I find a way to map those buttons reliably, I will let you know, tk_Berlin. So far tho, I've been quite pleased with just using the four buttons I mentioned. The more I use this device and the more I ponder my decision to stay with TFL3D instead of the normal WM interface, the more I realize that I don't need half the add-ons I used to use prior to having TF3D. I am accustomed to very, very, very *heavily* customizing my device, but the setup I have now works great and I really haven't lost nething from my old WM world. In fact, prolly gained a few CPU cycles and memory to boot.
I don't miss the Today Screen at all!!! Now that I think about it, I never really looked at it.
Cya!

PTT remap/fix

Good Evening
I downloaded a PTT fix from http://www.howardforums.com/archive/topic/1054343-1.html & installed the .cab file. It created a button 5 option in my settings/buttons menu. However, when I set that option for camera instead of PTT...it still initializes the PTT vs the camera. I'm going to assume that the PTT is not button 5 on the fuze, hence why it won't work. Does anyone know which button that it might be, and how i could edit that file? or make my own work around?
Thanks

The PTT might be hard wired to the PTT hardware needed for ATT's push to talk, kinda silly really I don't see why they still push this I've yet to meet anyone on ATT who uses this feature, maybe one day ill run into a cunstruction worker who knows.

TazMan1688 said:
Good Evening
I downloaded a PTT fix from http://www.howardforums.com/archive/topic/1054343-1.html & installed the .cab file. It created a button 5 option in my settings/buttons menu. However, when I set that option for camera instead of PTT...it still initializes the PTT vs the camera. I'm going to assume that the PTT is not button 5 on the fuze, hence why it won't work. Does anyone know which button that it might be, and how i could edit that file? or make my own work around?
Thanks
Click to expand...
Click to collapse
I'd love to see a solution to this too. I tried the Tilt registry hacks that let you re-map the PTT button but all that did was disable the button completely. (Which is still an improvement because at least now I don't have the PTT message come up every time I accidentally hit that button...)

Black93300ZX said:
CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).
Keep in mind, you can't individually map this button with this method, that may come later.
Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.
From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).
Click to expand...
Click to collapse
10 chars..

I were to remove that string after i install the .cab, would that disable PTT,and the settings menu take over?
I realize I can do a registry hack, but I was looking for something that A) would be easy to install/uninstall B) would add an easily accessible option to the settings on the phone.

TazMan1688 said:
I were to remove that string after i install the .cab, would that disable PTT,and the settings menu take over?
I realize I can do a registry hack, but I was looking for something that A) would be easy to install/uninstall B) would add an easily accessible option to the settings on the phone.
Click to expand...
Click to collapse
Um that is the easiest way right now.
And it does as B). Just change what Button 1 (Hold) to whatever you want and that's what your PTT button will act as.

Alright, its Button 1...awesome. Now lets see if I can find that setting ;-)
In settings/personal/buttons
...there is only an option for button 5, and button 5(hold). 1-4 do not show up there. How would I go about editing button 1's action?
Thanks alot

I found a program called AE BUTTON PLUS, it allows you to map any hardware button on the device. The PTT button is not listed by default so you need to "add button" it will then ask you to press the hardware button you would like to map, after that it shows up on the list and you can map it... I have found that adjusting long press setting causes issues, but tap and double tap work fine. I have tap disabled since I always hit the key by accident, double tap is Torch. Working fine so far. I believe you can even map individual keys on the keyboard in the same way.

I tried to use AE Button Plus(registered it), and had no luck creating an action for the PTT button. So I followed the registry ediit intructions, again..with no avail.
My PTT is disabled, which as previously stated, is better than nothing.
I would like to clarify two things. Does 40C6, and 40C7 relate to PTT on all devices, or is this a phone by phone basis? 40C6 could be PTT on a tilt, but the touch may be 33D4. Noobish question, but I'm not sure how this stuff works.
Also you said its "Button 1". Again, does this refer to hardware button # 1. Or is this just a random name we give it so we know which one to edit in the buttons menu?
So if I use 40c6, and 40c7 for "Button 1", and "Button 1(hold)"...it should work?
...I also used Button 6 & Button 6 hold as in the Tilt instructions. Same function.
I appreciate the assistance gang!

any1 have any luck?

If you want to remap the PTT button using a cab file (instead of manually doing reg tweaks) just look here: http://www.fuzemobility.com/ptt-remapping-revisited-application/
pretty simple but read the 'update' at the end

Long End Key remap

Hi. Suppose I just want to remap the long end key press button to something other than the HTC dafault. Do I need AEBPlus for that? I assume that would be a overkill for remapping just one button. The HTC interal app only allows to either display the quick list or make 4 other actions. I was wondering if I can change that to something else without using the AEBPlus app. I just wanted to run the comm manager rather than the htc options
Thanks

Don't get your hopes up about AE Button cause it don't work if your using touch gl. Apparently touch fl keeps regrabning the keys so sometimes they work snd sometimes they dont. I gave up. i think ot might work better with the hold button but like i said i got frustrated snd gaveup when thr suthor told mr there was nothing he could do..

craigwillie said:
Don't get your hopes up about AE Button cause it don't work if your using touch gl. Apparently touch fl keeps regrabning the keys so sometimes they work snd sometimes they dont. I gave up. i think ot might work better with the hold button but like i said i got frustrated snd gaveup when thr suthor told mr there was nothing he could do..
Click to expand...
Click to collapse
Actually I don't need it working with the TouchFlo, as I don't use TF. I only want to remap the long end press button to the comm manager. Of course it would have been great to also map a long press on the Home button or the Back button but I think I read that's not possible even without TouchFlo ?

what no one answered ? wow i thought that's easy,a metter of registry or link change. quite disappointing.

I am also looking for a way to change the back button to run some other program...

How to assign a shortcut to EndKey, SendKey ....
Not tried myself on TP, but maybe it's useful:
http://forum.xda-developers.com/showthread.php?t=356322

Create a shortcut in your windows directory called long_end.lnk
whatever the shortcut points to will run when you long press the end key.
There are a few of these hard press shortcuts
long_end.lnk
long_send.lnk
long_power.lnk
long_ptt.lnk
short_power.lnk
short_ptt.lnk

I can remap all the buttons except the Long End. Somehow the Long End button is mapped to the phone Lock. Where can I disable that and allow for my own?

Start, settings, system tab, long press end key
if you don't see what you want there ... we might have to figure out how to disable the long press htc software

I cooked my own rom and I didn't put in long press end key. I assumed it wouldn't have installed any reg settings for it, guess I'll have to check. Thanks!

For some reason if you don't add HTC Long End to the ROM, it will stick on one setting and can't be changed. Weird, but fixable. If you install HTC End Key (the cab is somewhere on here) it will override the previous setting and then you can either select your preference from within the program or create a custom link. Not sure about the second idea working, since I haven't tried it myself, but I've been able to override HTC End Key when it was installed on previous phones. You could also consider un-installing it after installing it if all else fails.

baub said:
For some reason if you don't add HTC Long End to the ROM, it will stick on one setting and can't be changed. Weird, but fixable. If you install HTC End Key (the cab is somewhere on here) it will override the previous setting and then you can either select your preference from within the program or create a custom link. Not sure about the second idea working, since I haven't tried it myself, but I've been able to override HTC End Key when it was installed on previous phones. You could also consider un-installing it after installing it if all else fails.
Click to expand...
Click to collapse
Yeah, I recooked the Long End Key Press in, but there isn't a custom selection part of it so that must be a different version of End Key software. It's ok not too important.

AEB
Just for those who wonder, AEButton can remap everything (single, double, triple, long presses) on all keys except two: Long Green and Long Red.
You either need to disable Long End Key software or find some other way to hard map these.

Using my HTC Touch Pro. I am still unablet to map the Long press End Key to something other than the limited options that the HTC Long Press End Key program settings offer.
I simply wish to map the long press end key to run a different program. I tried the suggestion offered on this post (http://forum.xda-developers.com/showthread.php?p=1783616#post1783616) but it doesn't work. I put a file called Long_End.lnk in the windows directory, soft reset the device and still it doesn't map to that. Only displays the HTC 'quick list'.
I am not running TF3D.
Anyhelp ? To map to any program I choose ?
Thanks

So no buddy managed to map the End button long press to some other program than the options that the HTC's prg in the settings allow ?
I want to remap the End key to open Phone Weaver Profiles which is much more useful than what the HTC Long End Pressapp offers.

nik3r said:
Just for those who wonder, AEButton can remap everything (single, double, triple, long presses) on all keys except two: Long Green and Long Red.
You either need to disable Long End Key software or find some other way to hard map these.
Click to expand...
Click to collapse
That's not the full story ....
on ex: HTC HD
there are buttons:
"Green Key", -> mapping possible but without Long Press
"Home Key" -> nothing possible !!!
"Back Key" -> not really mapable (mapping possible, but always send to wanted mapping ~backspace and jump back to Homescreen and then the mapped button will execute - little bit strange ..)
Longpress also doesn't work
"Red Key", -> mapping possible but without Long Press
tried with aebutton also (last version)
some additional ideas ?
cu camel

Proto732 said:
Start, settings, system tab, long press end key
if you don't see what you want there ... we might have to figure out how to disable the long press htc software
Click to expand...
Click to collapse
HI!
I'm another one that tried everything to remap the long end key without that HTC app and no solutions.
What we really need is to know how to disable that app from the system.
Anyone help us!

Fuze PTT button remapping problem

Before I start, I apologise if this has already been answered elsewhere, as I've spent about five hours trawling through threads looking, in vain, for a solution.
I have bought a new Fuze but the PTT button causes a problem with the aluminium case I bought for it. The problem is that the case is for a Touch Pro and the latch is right where the PTT button is (meaning the button is permanently depressed when the case is closed). It cannot be remapped in Settings/Buttons.
All I want to do is to be able to disable the button completely, or failing that make it an 'OK/Close' button. I have got rid of the PTT link but would greatly, greatly appreciate if someone could tell me what commands should be written in "short_PTT.lnk" and "long_PTT.lnk" to be able to do this. I've tried just leaving both blank but then the PTT button brings up an error message when pressed about not being able to find the shortcut.
Is there a way to achieve either of these solely using the registry, and without using third-party software?
Thanks for your time.

Here's full instructions on remapping your PTT button: http://www.fuzemobility.com/?p=598
To just disable it so it does nothing follow the steps at the beginning:
Using a registry editor delete HKLM\Services\PTT.
Next delete HKCU\Software\HTC\PTT.
Navigate back to the Windows directory and rename PTT to PTT2
Now create a new folder called PTT and set the properties as System and Read Only
If you follow all of those instructions and want to map it to close use this app and map it: http://www.fuzemobility.com/?p=1249

Problem fixed
You're a great person, bugsykoosh. I had done the first part you suggested, but the second link - and use of a tiny program called Zap It - fixed it perfectly.
Thank you heaps.

Okay so what is the joke why does this work for EVERYONE, except me. I mean seriously. I followed the steps but nothing. I press the button and I get nothing at all except the noise that indicates the keypress was succesfull WHAT GIVES.

bugsykoosh said:
To just disable it so it does nothing follow the steps at the beginning:
Using a registry editor delete HKLM\Services\PTT.
Next delete HKCU\Software\HTC\PTT.
Navigate back to the Windows directory and rename PTT to PTT2
Now create a new folder called PTT and set the properties as System and Read Only
Click to expand...
Click to collapse
This is overkill. You don't need to mess around with the PTT directory. If you just stop the PTT service from running, nothing will look in the PTT directory and its contents don't matter.
Just change HKLM\Services\PTT\Dll to an empty string and soft reset. The button will be completely inert. You can then remap it using AEBP or the short_PTT/long_PTT shortcuts, if you choose, or just leave it inactive.

Today
WMM,
If you change as you suggested, it looks like the long and short still work. I've remapped and did all the steps, but it looks like yours may be a little easier/cleaner. I'm curious, and I've looked extensively to no answer, but if I want the short press to just send my Fuze back to "Today" (in TF3D), is there a way to do that? If I press Start the first option is Today and this does exactly what I want. There's no shortcut that I can locate anywhere (and I'm sure it's my ignorance/technical inability) and the next step is to make a copy of that shortcut and name it short_PTT which I can handle. Any suggestions?

So, it isn't possible to map the PTT button from the Settings - Buttons screen? Looks like the method linked to above, with the short_PTT and long_PTT shortcuts, won't allow me to map the PTT buttons to work as the left and right softkeys.

As far as I know (which isn't very far, sometimes), the only way to get the PTT button to execute "Home" or the left/right soft keys is to use AE Button Plus. There may be applications that do those things that you can download (I know there are for things like toggling wifi and bluetooth, killing the current application, etc.) -- these are really tiny utility applications that are specifically intended for mapping to a button -- but I don't know of ones that do those particular things. (AEBP is able to do all those things, as well as giving you four mappable events -- single, double, triple, and long press).

okay seriously here do the links need to have special settings or anything. I mean what attributes should they have. Nothing works!

For the life of me, I can't remap my PTT button.
On a short press, it activates the voice command system.
On a long press, it activates the camera.
This seems to be from flashing NATF's ROM.
Following instructions above, I have no HKLM\Services\PTT or HKCU\Software\HTC\PTT in my registry editor.
I did the short and long_PTT/link and PTT folder in Windows. The links work there, but doesn't change what happens when the button is pushed.
I have AEButton Plus, but can't get it to add the PTT as a button.
Any suggestions where I can find in the registry what is making my PTT button act as it is? I'd rather have it do nothing than what it is doing now.
Thanks,
Chris

txemsdoc said:
On a short press, it activates the voice command system.
On a long press, it activates the camera.
This seems to be from flashing NATF's ROM.
Following instructions above, I have no HKLM\Services\PTT or HKCU\Software\HTC\PTT in my registry editor.
I did the short and long_PTT/link and PTT folder in Windows.
Click to expand...
Click to collapse
Yes, I believe NATF did not add the PTT stuff from AT&T into his ROM; the instructions above are for the stock AT&T ROM. You'll have to ask NATF how to remap the PTT button using his ROM.

jro2020 said:
okay seriously here do the links need to have special settings or anything. I mean what attributes should they have. Nothing works!
Click to expand...
Click to collapse
I'm not sure what you're talking about here. As I mentioned in my last posting just above this one, this probably only works in a ROM that supports PTT, like the stock AT&T ROM; if you're running something that doesn't support PTT, it would be a real surprise if "short_PTT" and "long_PTT" meant anything special, no? Assuming you are running the stock AT&T ROM, here's a step-by-step procedure for creating the short_PTT link to point to the Camera application using the built-in File Explorer.
1) Open File Explorer. If the drop-down box at the upper left says anything other than "My Device," tap the small down-arrow next to the label and then tap on "My Device."
2) Tap on "Windows" and wait a few seconds for the folder contents to appear.
3) Scroll down until you see "Camera" (the one that's 794K). Tap and hold that until the pop-up menu appears and then tap on "Copy".
4) Tap on "Menu" in the lower right, then "Edit", then "Paste Shortcut".
5) Scroll to the very bottom of the folder contents and you'll see "Shortcut to Camera" that was created. (The name may be truncated, depending on the size of the font and the screen orientation. Mine says, "Shortcut to Ca..." in portrait orientation. In any event, it will be the last thing in the folder contents.) Tap and hold on that until the pop-up menu appears and then tap "Rename". Then just type "short_PTT" to overwrite the existing name and hit return.
That's all you need to do. (If the application you want to run with the PTT button is in a different folder from \Windows, navigate there, tap-hold on the application executable, and select "Copy". Then navigate to \Windows and do steps 4 and 5 exactly as above.) This works exactly the same for the "long_PTT" shortcut.
If you do exactly that, does it not work? What happens if you tap the "short_PTT" shortcut in File Explorer? Does it start the camera?

Here is a link to a cab that will allow you to remap the PTT button: http://www.fuzemobility.com/ptt-remapping-revisited-application/

Remap PTT to launch phone Speed Dial?
I have disabled PTT so that I can use the button to launch programs - I just dont know how to launch phone speed dial - Does anyone know if there is a file that will launch speed dial that I can use to link to the PTT button?
Thanks!

pdafish said:
I have disabled PTT so that I can use the button to launch programs - I just dont know how to launch phone speed dial - Does anyone know if there is a file that will launch speed dial that I can use to link to the PTT button?
Thanks!
Click to expand...
Click to collapse
if your goal is to map your PTT button to call a single person check this posting: http://www.mobilitydigest.com/forums/showthread.php?p=3635

Here is another source that gives you step by step instructions.
http://htcblogger.com/2009/06/07/ho...utton-on-your-att-fuze-htc-diamond-touch-pro/

Note that if you're using the stock Fuze ROMs, the updated ROM from HTC adds the ability to remap the PTT button without any registry hacks.

PerfAlbion said:
Note that if you're using the stock Fuze ROMs, the updated ROM from HTC adds the ability to remap the PTT button without any registry hacks.
Click to expand...
Click to collapse
Can you post instructions as to how? I tried it already and the pulldown that shows you the available apps you can pick only shows PTT.
Best regards,
JD

So I followed the registry edit method, and created a file (not a folder) called PTT and things work great .... except ... when its on Airplane mode (Phone, Bluetooth and Data set to off) and I press the button (short or long) the PTT function kick off.
Is anyone else experiencing this?
Anyway to change this behaviour?

jdomi99 said:
Can you post instructions as to how? I tried it already and the pulldown that shows you the available apps you can pick only shows PTT.
Click to expand...
Click to collapse
Something's odd with your phone, then. Mine shows the full list of apps and options. I remapped PTT to VC without an issue.
Is it possible that you've got an application that's taking over the Buttons Control Panel? On mine, I had to remember to shut off SPB Pocket Plus's control over the buttons since it doesn't work with the Touch Pro line. When I first fired up the control panel, it listed no apps until I remembered that I had Pocket Plus running and turned of that feature.