Database Info

NO MORE PTT, BUTTON REMAPPED :) o

CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).
Keep in mind, you can't individually map this button with this method, that may come later.
Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.
From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).
NOTE: This apparently doesn't work on all Fuzes, trying to work that out now. It worked with my pre-release, but I'll update this post if a better way is found. Apparently on at least 1 Fuze it only DISABLES the PTT button.

Bump, a few people have asked about this, so bring it up to the top.

Black93300ZX said:
Bump, a few people have asked about this, so bring it up to the top.
Click to expand...
Click to collapse
any chance someone can make this a cab
edit: and there is a standard option to give the send button a hold program? nice

lbhocky19 said:
any chance someone can make this a cab
edit: and there is a standard option to give the send button a hold program? nice
Click to expand...
Click to collapse
I don't have means to create a cab, nor do I still have the phone, so I couldn't help ya... It's really not difficult though, if you want just grab a registry editor like PHM and do those quick steps. Another note, I think you have to hard reset to get PTT functionality back. Or maybe replacing the PTT part of the registry will make it work again, not sure. I know soft resets and removing the 40C2 will not change it back to working PTT.

Black93300ZX said:
CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).
Keep in mind, you can't individually map this button with this method, that may come later.
Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.
From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).
Click to expand...
Click to collapse
FWIW, this does not remap the PTT button my Fuze. It disables it - which is definitely a plus because I can't stand the annoying PTT message that came up when I accidentally pressed the button - but it doesn't remap it to the same functionality that the Button 1 (Hold) has.

ITNV said:
FWIW, this does not remap the PTT button my Fuze. It disables it - which is definitely a plus because I can't stand the annoying PTT message that came up when I accidentally pressed the button - but it doesn't remap it to the same functionality that the Button 1 (Hold) has.
Click to expand...
Click to collapse
Well, that's good to know... Perhaps the pre-release was different? Check if you can add another button to your available mappable buttons. Instead of deleting it leave the reg key there, then go to settings>map buttons or wherever it was. Is there a Button 6 there now?

Black93300ZX said:
Well, that's good to know... Perhaps the pre-release was different? Check if you can add another button to your available mappable buttons. Instead of deleting it leave the reg key there, then go to settings>map buttons or wherever it was. Is there a Button 6 there now?
Click to expand...
Click to collapse
It shows up as available to map but if you map it to anything, it doesn't work. I tried press and I tried press-and-hold and I tried every registry key from 40C0 through 40CF. I have a feeling the TF3D is somehow managing the keypress actions but I'm not sure how. Hopefully once the Fuze is in full release someone can figure it out!

My fuze doesn't have button remap option
I think I've got an official release, and when I go to settings-buttons all I get is button 1 hold option, it's set to Voice Command, which is fine.
Advanced config has some soft key remap options, but ptt isn't in there.
I don't have any option for PTT/button 5 or any other. Has anyone tried the slueth pttfix cab that worked on the 8525 in great fashion?

cparkhorn said:
I think I've got an official release, and when I go to settings-buttons all I get is button 1 hold option, it's set to Voice Command, which is fine.
Advanced config has some soft key remap options, but ptt isn't in there.
I don't have any option for PTT/button 5 or any other. Has anyone tried the slueth pttfix cab that worked on the 8525 in great fashion?
Click to expand...
Click to collapse
Well I had the same thing with my pre-release, button 1 = holding send. When I put the 40C2 key in there it linked the PTT button to "button 1", so both had the same function. Not perfect, but a hell of a lot better than seeing an annoying "Initialize PTT service?" message when I hit the button accidentally while playing teeter.

when i had the offical at&t rom, i couldnt find a way of remapping. but now that i've flashed romeos rom, it's automatically remapped to comm manager. so i can turn on my bluetooth, wifi, etc with 2 clicks, real convinent

omaralt said:
when i had the offical at&t rom, i couldnt find a way of remapping. but now that i've flashed romeos rom, it's automatically remapped to comm manager. so i can turn on my bluetooth, wifi, etc with 2 clicks, real convinent
Click to expand...
Click to collapse
I'm finalizing my "lite" AT&T ROM which I will release as soon as I can acquire a Fuze and test it. It will (hopefully) have Voice Command mapped to PTT, and Comm Manager mapped to Long Press PTT.
I'm still working on the exact reg keys, and I've stripped out 70+ MB of junk, so the ROM should be pretty snappy.

NotATreoFan said:
I'm finalizing my "lite" AT&T ROM which I will release as soon as I can acquire a Fuze and test it. It will (hopefully) have Voice Command mapped to PTT, and Comm Manager mapped to Long Press PTT.
I'm still working on the exact reg keys, and I've stripped out 70+ MB of junk, so the ROM should be pretty snappy.
Click to expand...
Click to collapse
Good (yet unexpected) to see you jumped ship from the Kaiser, I know a few people that are too attached to get a Fuze.

Black93300ZX said:
Good (yet unexpected) to see you jumped ship from the Kaiser, I know a few people that are too attached to get a Fuze.
Click to expand...
Click to collapse
As soon as it was announced, I decided it was time to jump. I skipped the 8525 launch, and wore the hell out of my 8125 because, at the time, 3G didn't mean anything to me. However, the Fuze has improved on the Tilt is just about every way... I rarely "tilted" the Tilt anyway.

We, the end users of the world, salute you....
Next I'll be asking how to flash the rom and get the "traditional" black TF3D theme... lol
Thanks again!

If someone can figure out how to map it to be a camera button like the one on tytn Id be super grateful and could def make a paypal donation for the cause

I've tried this with my release Fuze and it doesn't work. It disabled PTT but it did not map that button to the same as button 1 hold. A button 6 does show up in the buttons menu, but when I try to map it to anything, nothing happens when I press it.

PTT Wont remapp
Thank for the start on the reg edit but I still cant re map the ATT Fuzes PTT Button. I got the PTT alert Msg to go away after I Deleted its reg. and Button6 now show in the button remapping menu, but No matter I assign to it, it wont work even after many soft restarts.
Any ideas?
Thx for help

Yea, a remap to camera button would be awesome.
Thanks.

NotATreoFan said:
I'm finalizing my "lite" AT&T ROM which I will release as soon as I can acquire a Fuze and test it. It will (hopefully) have Voice Command mapped to PTT, and Comm Manager mapped to Long Press PTT.
Click to expand...
Click to collapse
Now that you released your ROM, could you post what changes you made to the registry for the PTT button?
Thanks...Brian

remap
how do i get into advanced config?

? remap green button to speakerphone

I want to map the green "phone" ("send") button to work as speakerphone with long keypress when phone is used, but I can't find any info.
OTOH I notice most ROMs use long press for this button and map usually wireless managers, which would be fine if it would work that way only when phone is not in use (and 'restore' the speakerphone function for long press when phone is in use) but I have not seen such solution yet. Has anyone done/try this?

-888- said:
I want to map the green "phone" ("send") button to work as speakerphone with long keypress when phone is used, but I can't find any info.
OTOH I notice most ROMs use long press for this button and map usually wireless managers, which would be fine if it would work that way only when phone is not in use (and 'restore' the speakerphone function for long press when phone is in use) but I have not seen such solution yet. Has anyone done/try this?
Click to expand...
Click to collapse
Hi,
Deleting Long_Send.lnk might restore original function of long press send key sir,.
Hope it help,.
Regards

Unfortunately, I don't think you can have two different functions based on context. AdvancedConfig has an option to map pretty much anything to the long send.

Garmin said:
Hi,
Deleting Long_Send.lnk might restore original function of long press send key sir,.
Hope it help,.
Regards
Click to expand...
Click to collapse
Thank you, Sir
blue_94_trooper said:
Unfortunately, I don't think you can have two different functions based on context. AdvancedConfig has an option to map pretty much anything to the long send.
Click to expand...
Click to collapse
Well, I was thinking about something more complex than I can do myself, hence my post here.
Idea is to make a small applet which will switch the function of the button based on the processes running (or other ways to determine it) and assigning different shortcut to this button. I.e. when the phone is connected it will assign speakerphone to the "send - long press", when phone is not in use it would redirect "send - long press" to the wireless manager, if you know what I mean (sorry my english); so virtually mapping the "green" button to this app could achieve that, no?

intersted also in your send key LKP!!
-888- said:
Thank you, Sir
Well, I was thinking about something more complex than I can do myself, hence my post here.
Idea is to make a small applet which will switch the function of the button based on the processes running (or other ways to determine it) and assigning different shortcut to this button. I.e. when the phone is connected it will assign speakerphone to the "send - long press", when phone is not in use it would redirect "send - long press" to the wireless manager, if you know what I mean (sorry my english); so virtually mapping the "green" button to this app could achieve that, no?
Click to expand...
Click to collapse
Bump....
I also want exactly the same setup! Great minds think alike!
Your mention about the wireless manager sounds a handy idea also, and I am at present having to use a long keypress on the left hand hardware 'record' button. This is fine, but I also have it mapped to normal press = audio record. But want to use it for something else at some point.The more buttons free the better. To be able to have the sent button act on a long key press to work the speakerphone seems to me like something that should actually be in place by default. I mean, what better way to start the speakerphone!!
I do hope someone is able to shed some light on this, or you manage to pull it off yourself you can count me in to try the fix etc.
PS:: Would a MORT SCRIPT help in this situation I wonder? I am not familiar with MS but sure someone may know a way round it.
Regards
Nick-UK

Thanks for your kind support
I wrote about this year or more ago on another forum, but few responses I got were discouraging at best.
I think if we could do such "app", we could use it for all the buttons and change their "assignments" based on the currently running apps...
With scripts we can do things like rename "Long_Send.lnk" into "Long_Send.disabled" (for example) instantly, and rename it back to "Long_Send.lnk" when i.e. pressed again. But the problem is that I don't know how to "detect" and use it in the scripts what is currently running and discriminate between foreground and background processes that are currently running?
Because what if you have two (or more!) programs that are using the same button assignments but for different purposes and both are running in the same time? say you are on the phone talking - thus long_send is assigned to speakerphone, and you also run (for example) windows media player where you assigned same green button to fullscreen display? The scripts cannot tell which one is running in the foreground by themselves, and (in this example) holding green button could bring the WMP to fullscreen instead of turning on speakerphone. Beforewe use mortscript to "activate" apropiate script, we need to know which process was started last (so - per my example - we would know that the phone was last started and not the WMP, and mortscript would run "speakerphone script for green button" instead of "fullscreen wmp script for green button"... and there is another problem: the phone is always ON on our PocketPCs since boot, and it is running all the time in the background, so it will have to differentiate between phone being active and phone in the "waiting" state...). Apologies if I sound incomprejensible, I tried to make it clearer but I don't know is it less gibberish
to cut it short: I don't think it can be done with simple scripts. But of course I may be wrong.
In theory it should work this way:
1 Long_Send.lnk -> starts our "app"
2 "App" checks what program is currently running on the screen (in the forground, or last started etc)
3 "App" executes apropiate action assigned for this program (i.e. speakerphone for active phone call, or wireless manager for today screen, etc etc)
4 "App" releases/removes/disables the action from previous step and changes it back to the state it was before when the foreground program is closed (i.e. changes back long_send from assignment to speakerphone back to default once the phone call ended)
sounds simple, doesn't it?

Raphael hardware keys, remapping?

Has anyone come up with working solution for mapping hw keys?
I found this thread on Diamond, but no help:
http://forum.xda-developers.com/showthread.php?t=398280

I am using AEKMap to enable both latin/cyrillic input on my TP's hw keyboard. You may google it and give it a try.

There is no need for additional software, just follow this post and you'll get the answer. Worked for me.

Try AE Button Plus.
B.

I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).

Taajuus said:
I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).
Click to expand...
Click to collapse
And that is EXACTLY what i also want to know....
The total lack of hardware-keys on this device is already disturbing enough, but being locked out of the option to remap any of them is truely horrid...
Anyone know of any reg-hacks maybe?

I've got Spb PocketPlus 4 installed btw, and it's got a button mapping function as well...
But when i go into the buttons map, some weird black icons appear with no name attached to it. Can anyone make anything of this? As you can see i've been able to map one thing only: the Spb close-button-contex-menu, which allows me to switch task KW-buttons only....
But this is not enough for me, i need ALT-TAB aswell and off course a VoiceCommand button.
And regrettably the Rapael doesn't have that many HW keys to start with...

I want also to use Home/Back buttons for different purposes,but I didn;t found a solution yet.

Gotten a step closer to what i really need over this weekend:
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
So far, this setup is to my satisfaction, and after two months of use this phone finaly behaves completely the way i want it to...

Hi, guys.
See my post here:
http://forum.xda-developers.com/showthread.php?p=2743845#post2743845
Hope this helps!
Cheers.

helped realy much !!! big thx for that nice instructions

You're very welcome, tk_berlin.
You be sure to let me know if anything in there doesn't make sense or you need any help with it.
Cheers from Canada!

ah cool to see a reply that fast ,)
hmm u got any further with finding out how to set the home button and the backwards button ?
Since the other htc user ,) wrote
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool

ah cool to see a reply that fast ,)
Click to expand...
Click to collapse
Lol. I was on my machine all morning and had XDA open in one of my tabs.
Yes, you can map practically any button in AEBPlus no problem.
hmm u got any further with finding out how to set the home button and the backwards button ?
Click to expand...
Click to collapse
AEBP will also *learn* any keys it doesn't have. So you could use the "Add Button" option, press your Home key, and away you go.
The way I have it set up, holding down the phone key will activate voice command (default behavior).
But remember, assigning commands to the Home or OK buttons (that "Back" button is actually an "OK" button) doesn't unmap what they normally do so you will always go home first and then it will perform <x>-function that you assign.
Personally, I don't like to program the Home or OK buttons because I find that they are "trickier" to press. What I mean is, if you tap the OK button near it's center or close to the left, it doesn't register a press. If you tap it sort of with the long part of your thumb (which is more natural when holding the device in one hand), it registers it. I've tried this with two TP's now and the button behaved the same way on both. Due to this, I find it unreliable to map anything to it.
In any case, as I mentioned earlier, the Volume buttons, Phone and End keys will be unmapped once you attach AEBP to them but the others will not.
Oh -- I forgot to mention, you can map the directional pad as well if that is your thing.
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool
Click to expand...
Click to collapse
It does work, but it sends an OK command first.
I wrote a little utility for hard-coded buttons such as these for another Pocket PC I had (an ASUS P527) called "DoNothing.exe" but we can't apply that work-around here. What I would do is replace the EXEs of apps the hardware keys called with my DoNothing.exe, but in the case of the TP, we definitely don't want to replace START.EXE (which I believe to be the likely EXE (haven't tested this)).
If I find a way to map those buttons reliably, I will let you know, tk_Berlin. So far tho, I've been quite pleased with just using the four buttons I mentioned. The more I use this device and the more I ponder my decision to stay with TFL3D instead of the normal WM interface, the more I realize that I don't need half the add-ons I used to use prior to having TF3D. I am accustomed to very, very, very *heavily* customizing my device, but the setup I have now works great and I really haven't lost nething from my old WM world. In fact, prolly gained a few CPU cycles and memory to boot.
I don't miss the Today Screen at all!!! Now that I think about it, I never really looked at it.
Cya!

PTT remap/fix

Good Evening
I downloaded a PTT fix from http://www.howardforums.com/archive/topic/1054343-1.html & installed the .cab file. It created a button 5 option in my settings/buttons menu. However, when I set that option for camera instead of PTT...it still initializes the PTT vs the camera. I'm going to assume that the PTT is not button 5 on the fuze, hence why it won't work. Does anyone know which button that it might be, and how i could edit that file? or make my own work around?
Thanks

The PTT might be hard wired to the PTT hardware needed for ATT's push to talk, kinda silly really I don't see why they still push this I've yet to meet anyone on ATT who uses this feature, maybe one day ill run into a cunstruction worker who knows.

TazMan1688 said:
Good Evening
I downloaded a PTT fix from http://www.howardforums.com/archive/topic/1054343-1.html & installed the .cab file. It created a button 5 option in my settings/buttons menu. However, when I set that option for camera instead of PTT...it still initializes the PTT vs the camera. I'm going to assume that the PTT is not button 5 on the fuze, hence why it won't work. Does anyone know which button that it might be, and how i could edit that file? or make my own work around?
Thanks
Click to expand...
Click to collapse
I'd love to see a solution to this too. I tried the Tilt registry hacks that let you re-map the PTT button but all that did was disable the button completely. (Which is still an improvement because at least now I don't have the PTT message come up every time I accidentally hit that button...)

Black93300ZX said:
CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).
Keep in mind, you can't individually map this button with this method, that may come later.
Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.
From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).
Click to expand...
Click to collapse
10 chars..

I were to remove that string after i install the .cab, would that disable PTT,and the settings menu take over?
I realize I can do a registry hack, but I was looking for something that A) would be easy to install/uninstall B) would add an easily accessible option to the settings on the phone.

TazMan1688 said:
I were to remove that string after i install the .cab, would that disable PTT,and the settings menu take over?
I realize I can do a registry hack, but I was looking for something that A) would be easy to install/uninstall B) would add an easily accessible option to the settings on the phone.
Click to expand...
Click to collapse
Um that is the easiest way right now.
And it does as B). Just change what Button 1 (Hold) to whatever you want and that's what your PTT button will act as.

Alright, its Button 1...awesome. Now lets see if I can find that setting ;-)
In settings/personal/buttons
...there is only an option for button 5, and button 5(hold). 1-4 do not show up there. How would I go about editing button 1's action?
Thanks alot

I found a program called AE BUTTON PLUS, it allows you to map any hardware button on the device. The PTT button is not listed by default so you need to "add button" it will then ask you to press the hardware button you would like to map, after that it shows up on the list and you can map it... I have found that adjusting long press setting causes issues, but tap and double tap work fine. I have tap disabled since I always hit the key by accident, double tap is Torch. Working fine so far. I believe you can even map individual keys on the keyboard in the same way.

I tried to use AE Button Plus(registered it), and had no luck creating an action for the PTT button. So I followed the registry ediit intructions, again..with no avail.
My PTT is disabled, which as previously stated, is better than nothing.
I would like to clarify two things. Does 40C6, and 40C7 relate to PTT on all devices, or is this a phone by phone basis? 40C6 could be PTT on a tilt, but the touch may be 33D4. Noobish question, but I'm not sure how this stuff works.
Also you said its "Button 1". Again, does this refer to hardware button # 1. Or is this just a random name we give it so we know which one to edit in the buttons menu?
So if I use 40c6, and 40c7 for "Button 1", and "Button 1(hold)"...it should work?
...I also used Button 6 & Button 6 hold as in the Tilt instructions. Same function.
I appreciate the assistance gang!

any1 have any luck?

If you want to remap the PTT button using a cab file (instead of manually doing reg tweaks) just look here: http://www.fuzemobility.com/ptt-remapping-revisited-application/
pretty simple but read the 'update' at the end

Fuze PTT button remapping problem

Before I start, I apologise if this has already been answered elsewhere, as I've spent about five hours trawling through threads looking, in vain, for a solution.
I have bought a new Fuze but the PTT button causes a problem with the aluminium case I bought for it. The problem is that the case is for a Touch Pro and the latch is right where the PTT button is (meaning the button is permanently depressed when the case is closed). It cannot be remapped in Settings/Buttons.
All I want to do is to be able to disable the button completely, or failing that make it an 'OK/Close' button. I have got rid of the PTT link but would greatly, greatly appreciate if someone could tell me what commands should be written in "short_PTT.lnk" and "long_PTT.lnk" to be able to do this. I've tried just leaving both blank but then the PTT button brings up an error message when pressed about not being able to find the shortcut.
Is there a way to achieve either of these solely using the registry, and without using third-party software?
Thanks for your time.

Here's full instructions on remapping your PTT button: http://www.fuzemobility.com/?p=598
To just disable it so it does nothing follow the steps at the beginning:
Using a registry editor delete HKLM\Services\PTT.
Next delete HKCU\Software\HTC\PTT.
Navigate back to the Windows directory and rename PTT to PTT2
Now create a new folder called PTT and set the properties as System and Read Only
If you follow all of those instructions and want to map it to close use this app and map it: http://www.fuzemobility.com/?p=1249

Problem fixed
You're a great person, bugsykoosh. I had done the first part you suggested, but the second link - and use of a tiny program called Zap It - fixed it perfectly.
Thank you heaps.

Okay so what is the joke why does this work for EVERYONE, except me. I mean seriously. I followed the steps but nothing. I press the button and I get nothing at all except the noise that indicates the keypress was succesfull WHAT GIVES.

bugsykoosh said:
To just disable it so it does nothing follow the steps at the beginning:
Using a registry editor delete HKLM\Services\PTT.
Next delete HKCU\Software\HTC\PTT.
Navigate back to the Windows directory and rename PTT to PTT2
Now create a new folder called PTT and set the properties as System and Read Only
Click to expand...
Click to collapse
This is overkill. You don't need to mess around with the PTT directory. If you just stop the PTT service from running, nothing will look in the PTT directory and its contents don't matter.
Just change HKLM\Services\PTT\Dll to an empty string and soft reset. The button will be completely inert. You can then remap it using AEBP or the short_PTT/long_PTT shortcuts, if you choose, or just leave it inactive.

Today
WMM,
If you change as you suggested, it looks like the long and short still work. I've remapped and did all the steps, but it looks like yours may be a little easier/cleaner. I'm curious, and I've looked extensively to no answer, but if I want the short press to just send my Fuze back to "Today" (in TF3D), is there a way to do that? If I press Start the first option is Today and this does exactly what I want. There's no shortcut that I can locate anywhere (and I'm sure it's my ignorance/technical inability) and the next step is to make a copy of that shortcut and name it short_PTT which I can handle. Any suggestions?

So, it isn't possible to map the PTT button from the Settings - Buttons screen? Looks like the method linked to above, with the short_PTT and long_PTT shortcuts, won't allow me to map the PTT buttons to work as the left and right softkeys.

As far as I know (which isn't very far, sometimes), the only way to get the PTT button to execute "Home" or the left/right soft keys is to use AE Button Plus. There may be applications that do those things that you can download (I know there are for things like toggling wifi and bluetooth, killing the current application, etc.) -- these are really tiny utility applications that are specifically intended for mapping to a button -- but I don't know of ones that do those particular things. (AEBP is able to do all those things, as well as giving you four mappable events -- single, double, triple, and long press).

okay seriously here do the links need to have special settings or anything. I mean what attributes should they have. Nothing works!

For the life of me, I can't remap my PTT button.
On a short press, it activates the voice command system.
On a long press, it activates the camera.
This seems to be from flashing NATF's ROM.
Following instructions above, I have no HKLM\Services\PTT or HKCU\Software\HTC\PTT in my registry editor.
I did the short and long_PTT/link and PTT folder in Windows. The links work there, but doesn't change what happens when the button is pushed.
I have AEButton Plus, but can't get it to add the PTT as a button.
Any suggestions where I can find in the registry what is making my PTT button act as it is? I'd rather have it do nothing than what it is doing now.
Thanks,
Chris

txemsdoc said:
On a short press, it activates the voice command system.
On a long press, it activates the camera.
This seems to be from flashing NATF's ROM.
Following instructions above, I have no HKLM\Services\PTT or HKCU\Software\HTC\PTT in my registry editor.
I did the short and long_PTT/link and PTT folder in Windows.
Click to expand...
Click to collapse
Yes, I believe NATF did not add the PTT stuff from AT&T into his ROM; the instructions above are for the stock AT&T ROM. You'll have to ask NATF how to remap the PTT button using his ROM.

jro2020 said:
okay seriously here do the links need to have special settings or anything. I mean what attributes should they have. Nothing works!
Click to expand...
Click to collapse
I'm not sure what you're talking about here. As I mentioned in my last posting just above this one, this probably only works in a ROM that supports PTT, like the stock AT&T ROM; if you're running something that doesn't support PTT, it would be a real surprise if "short_PTT" and "long_PTT" meant anything special, no? Assuming you are running the stock AT&T ROM, here's a step-by-step procedure for creating the short_PTT link to point to the Camera application using the built-in File Explorer.
1) Open File Explorer. If the drop-down box at the upper left says anything other than "My Device," tap the small down-arrow next to the label and then tap on "My Device."
2) Tap on "Windows" and wait a few seconds for the folder contents to appear.
3) Scroll down until you see "Camera" (the one that's 794K). Tap and hold that until the pop-up menu appears and then tap on "Copy".
4) Tap on "Menu" in the lower right, then "Edit", then "Paste Shortcut".
5) Scroll to the very bottom of the folder contents and you'll see "Shortcut to Camera" that was created. (The name may be truncated, depending on the size of the font and the screen orientation. Mine says, "Shortcut to Ca..." in portrait orientation. In any event, it will be the last thing in the folder contents.) Tap and hold on that until the pop-up menu appears and then tap "Rename". Then just type "short_PTT" to overwrite the existing name and hit return.
That's all you need to do. (If the application you want to run with the PTT button is in a different folder from \Windows, navigate there, tap-hold on the application executable, and select "Copy". Then navigate to \Windows and do steps 4 and 5 exactly as above.) This works exactly the same for the "long_PTT" shortcut.
If you do exactly that, does it not work? What happens if you tap the "short_PTT" shortcut in File Explorer? Does it start the camera?

Here is a link to a cab that will allow you to remap the PTT button: http://www.fuzemobility.com/ptt-remapping-revisited-application/

Remap PTT to launch phone Speed Dial?
I have disabled PTT so that I can use the button to launch programs - I just dont know how to launch phone speed dial - Does anyone know if there is a file that will launch speed dial that I can use to link to the PTT button?
Thanks!

pdafish said:
I have disabled PTT so that I can use the button to launch programs - I just dont know how to launch phone speed dial - Does anyone know if there is a file that will launch speed dial that I can use to link to the PTT button?
Thanks!
Click to expand...
Click to collapse
if your goal is to map your PTT button to call a single person check this posting: http://www.mobilitydigest.com/forums/showthread.php?p=3635

Here is another source that gives you step by step instructions.
http://htcblogger.com/2009/06/07/ho...utton-on-your-att-fuze-htc-diamond-touch-pro/

Note that if you're using the stock Fuze ROMs, the updated ROM from HTC adds the ability to remap the PTT button without any registry hacks.

PerfAlbion said:
Note that if you're using the stock Fuze ROMs, the updated ROM from HTC adds the ability to remap the PTT button without any registry hacks.
Click to expand...
Click to collapse
Can you post instructions as to how? I tried it already and the pulldown that shows you the available apps you can pick only shows PTT.
Best regards,
JD

So I followed the registry edit method, and created a file (not a folder) called PTT and things work great .... except ... when its on Airplane mode (Phone, Bluetooth and Data set to off) and I press the button (short or long) the PTT function kick off.
Is anyone else experiencing this?
Anyway to change this behaviour?

jdomi99 said:
Can you post instructions as to how? I tried it already and the pulldown that shows you the available apps you can pick only shows PTT.
Click to expand...
Click to collapse
Something's odd with your phone, then. Mine shows the full list of apps and options. I remapped PTT to VC without an issue.
Is it possible that you've got an application that's taking over the Buttons Control Panel? On mine, I had to remember to shut off SPB Pocket Plus's control over the buttons since it doesn't work with the Touch Pro line. When I first fired up the control panel, it listed no apps until I remembered that I had Pocket Plus running and turned of that feature.