Porting ROMs - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Are there any directions in porting ROMs to Kaiser? I looked around but haven't ran into one yet. For example, Diamond ROM 20273 to Kaiser or Hermes ported 20273 to Kaiser. Hopefully there is a tutorial somewhere. I looked at most ROMs offered by the cooks but most of them are 19xxx. Thanks in advance.

Yes, look here (thanks to raiisak).

I'd just like to find the Diamond 20273 ROM

Thanks for that link, helps a lot. As far as Diamond ROM, I'm looking for the 20273 as well. I currently have a Hermes and it's running DvHA_ddt's rom and it works great. I bought a Tilt/Kaiser a few days ago, it's not here yet but was looking for a rom based out of 20273 but didn't find any. I found the Wiki on cooking and got a test build out. Now looking into porting the ROM, if I can find it.

This wouldn't be the same thing as pulling your own ROM off of your phone would it?

The newest BuildOS+Package tool will do porting for you, problem is that it is not Kaiser/Tilt/TytnII friendly. Several emails have been sent to the author of this program but no response has been given yet....

HEdwards2008 said:
This wouldn't be the same thing as pulling your own ROM off of your phone would it?
Click to expand...
Click to collapse
No. It's using a rom from a different device. In this case, the 5.2.20273 from the HTC Diamond. You cannot directly flash it to the Tilt because the XIP (the Kernel) is specific to the Diamond. It needs to be ported first.
ryncppr said:
The newest BuildOS+Package tool will do porting for you, problem is that it is not Kaiser/Tilt/TytnII friendly. Several emails have been sent to the author of this program but no response has been given yet....
Click to expand...
Click to collapse
I wish he updates it soon. It would make it a lot easier.
Is there an easy way to dump the xip.bin?

maximumbs said:
No. It's using a rom from a different device. In this case, the 5.2.20273 from the HTC Diamond. You cannot directly flash it to the Tilt because the XIP (the Kernel) is specific to the Diamond. It needs to be ported first.
I wish he updates it soon. It would make it a lot easier.
Is there an easy way to dump the xip.bin?
Click to expand...
Click to collapse
download http://forum.xda-developers.com/attachment.php?attachmentid=43364&d=1184035828
then delete this line in dumpKaiser.bat using Notepad:
Code:
del xip.bin

mbarvian said:
download http://forum.xda-developers.com/attachment.php?attachmentid=43364&d=1184035828
then delete this line in dumpKaiser.bat using Notepad:
Code:
del xip.bin
Click to expand...
Click to collapse
Awesome, thanks. You guys rock. Will this work for the Diamond ROM? I hope it does.

Related

hi my first rom is comming

Hi everyone I got my Kaiser 3 days ago and I've been reading and sending pm to some people then reading some more and I now have my first cooked rom on my kaiser
I still need to figure out how to port the xip but for now I have a rom 0s 5.2.1620(build 18533) so it's a new build but the xip is not realy new
I still need to make some changes to the oem stuff
anyway just liked to share this news as some of you might know me from the prophet forum.
Very nice! Will we be seeing the cube in this rom?
shadowace said:
Very nice! Will we be seeing the cube in this rom?
Click to expand...
Click to collapse
hi
it's still to early to tell but I'm trying to make it work but in this flash I did not get it working.
edit I just tried and I can launch all sides of the cube using it's shortcuts no black screen as on some devices
Does the "Change page pool by paradis_pal / Chopin" link in your sig work on the Kaiser?
Thanks!
Dave
gullum said:
Hi everyone I got my Kaiser 3 days ago and I've been reading and sending pm to some people then reading some more and I now have my first cooked rom on my kaiser
I still need to figure out how to port the xip but for now I have a rom 0s 5.2.1620(build 18533) so it's a new build but the xip is not realy new
I still need to make some changes to the oem stuff
anyway just liked to share this news as some of you might know me from the prophet forum.
Click to expand...
Click to collapse
Nice One
haven't been to the prophet forum, but heard of your name. Can't wait to try out your rom.
We are glad to have you here!!!
Gullum is already cooking rom for our Kaiser? Perfect news!!!!!
dkapp said:
Does the "Change page pool by paradis_pal / Chopin" link in your sig work on the Kaiser?
Thanks!
Dave
Click to expand...
Click to collapse
no unfortunaly not Chopin needs to make a new pagepool changer for each new build
Wow The Big Master Come into Kaiser ......Can't wait....for Kaiser touch I by Gullum
I'm using your prophet touch rom andi its awesome,i believe that you can make it to the kaiser device too....
cheers mr.gullum
Never seen your stuff before, but I'm decided to have more cooks in the Kaiser kitchen!
Kick ass electronica music, too!
I hope those tracks come standard on your roms?
I will upload a new rom beta2 if you like tomorrow with a more clean interface and a new designe this designe is from my prophet series.
I will go through all apps and see what is needed and whats not.
unfurtunaly the cube is not an easy task to get working. So I'll remove it for next beta so I can test some other apps insted.
I'll also post some screenshots and more info on what is in the rom
gullum said:
I will upload a new rom beta2 if you like tomorrow with a more clean interface and a new designe this designe is from my prophet series.
I will go through all apps and see what is needed and whats not.
unfurtunaly the cube is not an easy task to get working. So I'll remove it for next beta so I can test some other apps insted.
I'll also post some screenshots and more info on what is in the rom
Click to expand...
Click to collapse
Excellent, really looking forward to that!

Kaiser ROM Kitchen Tutorial

After PMing jcespi2005 for his approval, I've taken the time to write up this beginner ROM cooking tutorial. Please reply with your comments or questions about it in this thread.
Enjoy.
Kaiser ROM Kitchen Tutorial​
Here are some user testimonials:
tkalli said:
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today. It was a great learning experience. I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more. I have both a Tilt and a Kaiser. Looking forward to more learning.
Click to expand...
Click to collapse
gregross said:
...Alex, thanks for the tutorial and components in a nice tidy package - actually got me to jump into cooking for the first time...
Click to expand...
Click to collapse
stozmon said:
_Alex_ and jcespi2005,
Thank you both SO VERY MUCH for all of your time and contributions.
I've been hesitant thus far to cook my own ROM but with the noob friendly screenshots added to the wiki, I finally had the courage to cook up my own ROM, flash it and what do you know...it WORKED!
Being a professional chef, I am now inspired to work towards virtual chefdom in the ROM realm.
Thanks again!
Click to expand...
Click to collapse
ecltech said:
Great job ... couldn't be easier!
Click to expand...
Click to collapse
Do all these tools function rightly in windows Vista ?
What is int he package Cingular Pre-Midlets 9020? Sounds like it could either be important or junk
cooked rom
hello alex
sorry about my english
i want ask you about recook cooked rom like dutty's rom
i know that in need to instell the rom in my device and after that i need to dump the rom/
ok i know to do that without any error, i need allso take the part01.raw and part02.raw and puy them with ruu_signed (the cooked one "dutty's") in one folder
when i start cooking that rom i allways get the same result about 2 dsm file that the accses is denaid
what can i do to fix that problem, what did i go wrong
jast to tell you that is no problem whie shipped rom, buy with cooked i dont know what to do
thanks for your help
doron
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today.
It was a great learning experience.
I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more.
I have both a Tilt and a Kaiser.
Looking forward to more learning.
So just to check I under stand this..
I went thorugh the the install instructions OK but the bit that confused me was...
Extract the OEM Package folder included within the ROM thread to \kaiserkitchen\packages
I assume you have to manually create a sub-folder called packages under
\kaiserkitchen\ ??
But then what is the use of the OEM_HTCxxx folder?? What if anything goes in there??
So then, if I unzip all the OEM cab files into the \kaiserkitch\packages folder (OR any other OEM packages I can find , especially HTC packages) then when Ervius runs - I should see all the packages I copied to the \kaiserkitch\packages folder???
Many Thanks for your tutorials - it's really nice to see people sharing their knowledge!!
Cheers
John
dcdivenut said:
What is int he package Cingular Pre-Midlets 9020? Sounds like it could either be important or junk
Click to expand...
Click to collapse
Cingular Pre-Midlets is all the java games that came with the phone. It's mostly junk...
mordof said:
hello alex
i want ask you about recook cooked rom like dutty's rom
i know that in need to instell the rom in my device and after that i need to dump the rom/
Click to expand...
Click to collapse
Not really good at reconstructing ROMs, but the errors you're receiving about duplicate DSMs, you'll need to find the duplicate folder and/or file and delete it.
You might be able to get more help in the reconstructing ROMs thread stickied at the top of the forums.
Hope this helps.
panosha said:
Do all these tools function rightly in windows Vista ?
Click to expand...
Click to collapse
From other threads, I've heard that extract will not work in Vista. I can't say about cook or flash until I get a chance to test it.
Hope this helps...
odyseus said:
So just to check I under stand this..
I went thorugh the the install instructions OK but the bit that confused me was...
Extract the OEM Package folder included within the ROM thread to \kaiserkitchen\packages
Click to expand...
Click to collapse
It seems like you haven't downloaded the OEM packages yet. It should be alot clearer with the files in front of you. Download them first and see if that helps...
tkalli said:
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today.
It was a great learning experience.
I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more.
I have both a Tilt and a Kaiser.
Looking forward to more learning.
Click to expand...
Click to collapse
Glad to see that I'm helping others cook
_Alex_ said:
It seems like you haven't downloaded the OEM packages yet. It should be alot clearer with the files in front of you. Download them first and see if that helps...
Click to expand...
Click to collapse
Hi Alex,
My mistake I though I had got these files..
Just one more question. I have deconstructed Dutty's latest ROM. There are a few 'OEM' packages in the SYS folder that I would like to add to your base ROM one being a folder called HTC Touchflo Cube.
I have set up another kitchen folder with your Alex base ROM, now where would I put the additional Dutty extracted folders eg HTC Touchflo Cube folder?
Do I simply add the additional Dutty extracted OEM packages to the SYS (Alex) folder? or do I add it under (Alex) packages??
Many Thanks for your patience
John
odyseus said:
Hi Alex,
My mistake I though I had got these files..
Just one more question. I have deconstructed Dutty's latest ROM. There are a few 'OEM' packages in the SYS folder that I would like to add to your base ROM one being a folder called HTC Touchflo Cube.
I have set up another kitchen folder with your Alex base ROM, now where would I put the additional Dutty extracted folders eg HTC Touchflo Cube folder?
Do I simply add the additional Dutty extracted OEM packages to the SYS (Alex) folder? or do I add it under (Alex) packages??
Many Thanks for your patience
John
Click to expand...
Click to collapse
Extracting OEM packages from other people's cooked ROMs isn't that easy which is why it's not covered in this tutorial. I also don't like doing it because it's somewhat stealing...
You may have better luck following my steps in my OEM Package Tutorial, and convert the htc touch cube cabs to OEM packages.
Here are some links for HTC touch cube cabs:
http://forum.xda-developers.com/showthread.php?t=348437 and http://forum.xda-developers.com/showthread.php?t=343583
Hi Alex - I didn't think of that, I didn't realise that the ROM author had made their own OEM packages..
Anyway, in that case, I will have a go at generating a OEM package for coreplayer, I assume that I will add this package in the kaiserkitchen\packages folder? (Not SYS etc..)
Cheers
John
_Alex_ said:
Glad to see that I'm helping others cook
Click to expand...
Click to collapse
Next I am going to try and cook one with the dotnet 3.5.
Be traveling next ten days, so may not get to it right away...
sorry doppel-post
Hi Alex thx for this TUT... i´m testing...
First: Sorry for my bad english
This is the first time for me to cooking roms.
i use the HTC German recunstructed ROM as Base-Rom...
after klicking the GO Button, i have many line´s of:
package "XXXXXXX" does not contain .rgu file "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.rgu"
not all, but a few... is this normal??
EDIT On:
All is great... my first GER cooked ROM run I´m so happy
and now i musst learn how i create/delete (GERman) OEM Pakages, to create a good German ROM...
@ ALex
very big thx!!!
Edit OFF:
Martie said:
package "XXXXXXX" does not contain .rgu file "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.rgu"
not all, but a few... is this normal??
Click to expand...
Click to collapse
Yes, not all packages contain rgu or registry entries. No worries there.
odyseus said:
Anyway, in that case, I will have a go at generating a OEM package for coreplayer, I assume that I will add this package in the kaiserkitchen\packages folder? (Not SYS etc..)
Cheers
John
Click to expand...
Click to collapse
Yup, it all goes in packages.
FWIW, The Core Player Media Player (TCPMP) exists as a OEM package for the freeware version and can be found as 'Pocket Media Player' within the OEM packages included within the Kaiser ROM Kitchen by jcespi2005.
_Alex_ said:
From other threads, I've heard that extract will not work in Vista. I can't say about cook or flash until I get a chance to test it.
Hope this helps...
Click to expand...
Click to collapse
Cooking works great in Vista. Thank you.

[KITCHEN] BETA: Extended Elf/Elfin Kitchen for WM6.1

Extended Kitchen for Elf/Elfin
Elfin base: New Elfin 2.xx
OS base: VF Kaiser UK 3.08.161.0 (Build 19199)
Completely rebuild the XIP section based on:
- Kaiser: MSXIPKernel, MSXIPKernelLTK
- Elfin: OEMXIPKernel
adjusted boot.rgu by adding the 19199 related changes
OEM packages except of OEMDrivers are clean 19199 packages
Requires the Microsoft Visual C++ 2008 Redistributable Package
Full XIP editing support
I've added a tool that removes the RGU's from the rom and moves all the DSM content to one DSM
Please read:
For the case that you are a cooking ROMs and getting donations for it, I would really appreciate a small donation,
cos I'm saving money for a new device. (I thing that would be fair )
Download: ELFIN_DEV_v2.1_Build_19199.rar
elfin rom not work on elf and viceversa, but I am not sure.Because there are some rom that can be used with elf and elfin.
bepe said:
WORK IN PROGRESS
I would need some information and rom testers to create this Kitchen, cos I dont have this device (no device right now )
First I would need to know if Elfin roms work on Elf?
Click to expand...
Click to collapse
That is good news....
The new 2.20.x.x Elfin ROMs work with both devices.
I asked swiftblade a while ago. It has something to do with the XIP.
pkoper said:
That is good news....
The new 2.20.x.x Elfin ROMs work with both devices.
I asked swiftblade a while ago. It has something to do with the XIP.
Click to expand...
Click to collapse
ok, great
could someone try if this rom is booting on Elf/Elfin:
http://rapidshare.com/files/89216919/OS-ElfIn.rar
it is the final 19199 build... I know it is confusing, cos there exists 19521, 19716, but this one is much newer (much faster, more stable, not beta)... don't ask my what MS is doing with this numbers, I've looked into all this builds and non of those is fake (only the 20000 build was fake, but that was not even AKU1 )
bepe said:
ok, great
could someone try if this rom is booting on Elf/Elfin:
http://rapidshare.com/files/89216919/OS-ElfIn.rar
Click to expand...
Click to collapse
I'll try after work
Hella Yeah
Great to see You over here on the Touch side Bepe.
I'd be honoured to give tis a whirl.
Just came back from sabatical and vacation.
I was just looking for a new Base to Cook and test with anyways to, Great Timing.
Bepe You Da Man, I'm Downing Now let you hear soon.
Answer to your question
bepe said:
First I would need to know if Elfin roms work on Elf?
Click to expand...
Click to collapse
I am using an Elf (Wasabi 64/128), I have flashed 2.20 ROM (for Elfin) for sometimes. It did worked on my Elf with the result that Program Memory became bigger than what it should be and extended over Storage Memory (less Storage Memory).
It also consumed higher memory.
BTW, it did work.
+++
There is one thing that I cannot do, I cannot make an OS.nb smaller than 50MB. It cannot be flashed to my Elf.
suracha said:
I am using an Elf (Wasabi 64/128), I have flashed 2.20 ROM (for Elfin) for sometimes. It did worked on my Elf with the result that Program Memory became bigger than what it should be and extended over Storage Memory (less Storage Memory).
It also consumed higher memory.
BTW, it did work.
+++
There is one thing that I cannot do, I cannot make an OS.nb smaller than 50MB. It cannot be flashed to my Elf.
Click to expand...
Click to collapse
Correct 50MB is the Limit which should give you a pretty nice Big Storage Anyhoos.
50MB limit
Noonski said:
Correct 50MB is the Limit which should give you a pretty nice Big Storage Anyhoos.
Click to expand...
Click to collapse
Yes, I known. I wish I can go lower than that.
Nice work again bepe.!
Made sticky..
@Bepe..It is great pleasure to see your wonderful kitchen at this forum.. And yes, I can confirm that all the 2.20.xxx.xx ROMs work on both the ELFs and ELFins without any hitch.
I am downloading your Build 19199 now and will try it out after work....
@Noonski... Welcome Back! The ELF forum was never the same without you..
Report
Already flashed OS-ElfIn to my Elf, it does work and it is much better than install Elfin 2.20 ROM on my Elf.
Camera doesn't work.
What pool does it have 4Mb or 8Mb???. Lately to those who we have ELF have us forgotten because 8Mb of pool it is great for us that our machine has few RAM, and nobody can say to me like to change the pool to 4Mb.
Thank you
suracha said:
Already flashed OS-ElfIn to my Elf, it does work and it is much better than install Elfin 2.20 ROM on my Elf.
Camera doesn't work.
Click to expand...
Click to collapse
Ok, thanks for testing
There are no apps installed on this rom, cos I'm not releasing an Elf ROM without having an Elf.
I'm just making a Kitchen the other ROM cooks can use.
This Kitchen is just a "perfect" port of the new OS and to add the OEM apps is job of the cooks.
tiggerbcn said:
What pool does it have 4Mb or 8Mb???. Lately to those who we have ELF have us forgotten because 8Mb of pool it is great for us that our machine has few RAM, and nobody can say to me like to change the pool to 4Mb.
Thank you
Click to expand...
Click to collapse
I dont know... to addjust that is also part of the ROM cooks
ok, so now that it is working it is time to upload the Kitchen
Upload done, happy cooking
bepe said:
Upload done, happy cooking
Click to expand...
Click to collapse
Great, Thanks.
Will try it today ...
Bad Boy Bepe.
Now you got me cooking at work.
Checking it out.
haha, this is nice Bepe!!
Finally a very clean kitchen to play with!!!
@ noonski: He gotme playing on my work also, damn cook/flash aholics!!
gr. bram
btw. is this wm 6.1?
bram_smulders said:
haha, this is nice Bepe!!
Finally a very clean kitchen to play with!!!
@ noonski: He gotme playing on my work also, damn cook/flash aholics!!
gr. bram
btw. is this wm 6.1?
Click to expand...
Click to collapse
yes, it is WM 6.1. Build 19199, forget about the other WM 6.1 builds... this one is the newest one, more stable, much faster, not beta.
19716 Is beta build and very slow
19521 Is a very old build... I've known this build for about 4 months
191xx Also old and some of them beta
19400 Also new... but no idea what exactly that is... it is somehow different from the other build
19199 Is the new build ported from a leaked HTC Kaiser rom, it seams to be something like final AKU 1; Try it, it's very fast
I have no idea were all this builds higher than 19199 come from, but all of them are real and not fake numbers. So I'm thinking MS is working with different teams on this builds. Build 195xx 197xx seam to have a newer kernel, 191xx have newer SYS stuff, 19199 is the perfect one with new kernel and SYS

Original Windows Mobile 6.1 Port

Hi,
My name is Baron. I own a HTC P4350 PPC. I was wondering if there is any port of the Original WM 6.1 version for the Herald without any customizations. I have been trying different versions of each cook's 6.1 versions but I don't know. I like them but I guess I like things to be original lol. I really like the TouchFLO, its awesome. But if there is anyone who can help me out or even let me know how to aquire 6.1 and teach me how to port it would be nice. Maybe I can be a cook or something. But I guess that would need the help of all of you. I am familiar with flashing Heralds at the moment and of course last year I was flashing Motorolas with Motorola's custom OS not the ones with WM. Anyway thanks for your time and I hope I can be seen as a cook around here or something. Oh, don't forget about the original WM 6.1
baronmxc said:
Hi,
My name is Baron. I own a HTC P4350 PPC. I was wondering if there is any port of the Original WM 6.1 version for the Herald without any customizations. I have been trying different versions of each cook's 6.1 versions but I don't know. I like them but I guess I like things to be original lol. I really like the TouchFLO, its awesome. But if there is anyone who can help me out or even let me know how to aquire 6.1 and teach me how to port it would be nice. Maybe I can be a cook or something. But I guess that would need the help of all of you. I am familiar with flashing Heralds at the moment and of course last year I was flashing Motorolas with Motorola's custom OS not the ones with WM. Anyway thanks for your time and I hope I can be seen as a cook around here or something. Oh, don't forget about the original WM 6.1
Click to expand...
Click to collapse
There was never an original WM6.1 for the Herald. You'll have to cook your own ROM using a WM6.1 base and port it using a stock 6.0 Herald ROM without any kind of customizations except for a lot of the customizations needed to fix all the bugs that will arise from simply sticking both bases together. The original ROM tends to be slow and buggy, though... What about the original ROM do you like? There might already be a ROM that has those features.
Thanks for your fast response. I knew there was never a actual 6.1 release for the Herald, I was just wondering if anyone ported the original release to work with a Herald. But with what you said about it being buggy, I never thought about that but I guess that would make sense, but I have seen some custom ROMs with 6.1 and flashed them myself to see how it would work and these 6.1 versions were not bad at all, especially with TouchFLO. So I guess my question is, how were they able to cook a 6.1 version? They had to have picked up an original to modify it if I'm correct. As I said I would like to learn how to cook as well so if anyone has time to help me learn at least the basics that would be appreciated. I can learn more myself if I know the basics.
baronmxc said:
Thanks for your fast response. I knew there was never a actual 6.1 release for the Herald, I was just wondering if anyone ported the original release to work with a Herald. But with what you said about it being buggy, I never thought about that but I guess that would make sense, but I have seen some custom ROMs with 6.1 and flashed them myself to see how it would work and these 6.1 versions were not bad at all, especially with TouchFLO. So I guess my question is, how were they able to cook a 6.1 version? They had to have picked up an original to modify it if I'm correct. As I said I would like to learn how to cook as well so if anyone has time to help me learn at least the basics that would be appreciated. I can learn more myself if I know the basics.
Click to expand...
Click to collapse
I have a few threads dedicated to teaching how to cook. It's just the basics but it's enough to get you started.
Every 6.1 ROM here has been made by porting a 6.1 from another phone (there is no "original" per say as new versions are released all the time.) using the OEM of an original HERALD 6.0 ROM but modifying it heavily, making a custom XIP (kind of like the kernel and all the stuff related to it) from both the ported ROM and the older ROM, and then adding their own apps and tweaks.
In my case, I also do a heavy amount of stripping of useless files.
I'm kind of on the same page. I'd love to find an unmodified wm6.1. I've tried a couple of them, and they're all great, but they also have a bunch of stuff loaded in them or different versions of apps. I'd like to find a wm6.1 load that JUST has the org wm6.1 apps in it and nothing else. No mods, no alternative apps, skins, etc.
vgpclife said:
I'd like to find a wm6.1 load that JUST has the org wm6.1 apps in it and nothing else. No mods, no alternative apps, skins, etc.
Click to expand...
Click to collapse
then take an original WM6 and behappy with that...belive me ivansstripped wm6.1 ONLY have tweaks that are really useful...to correct the crappy MS waste....
If you do NOT wantto correct that crap...go with an original WM6...it the same
same here
I am also looking for this...
I am VERY new to cooking and have not been able to manage to Dump any of the 6.1 ROMs. (I must be missing something)
I would like to start with an "original" ROM that I can play with and try to build my own custom ROM
leapfrogg said:
I am also looking for this...
I am VERY new to cooking and have not been able to manage to Dump any of the 6.1 ROMs. (I must be missing something)
I would like to start with an "original" ROM that I can play with and try to build my own custom ROM
Click to expand...
Click to collapse
I guess I'm having a hard time understanding what "original" means. If you just want something clean and stripped that you can add whatever you want into it, then any of my ROMs will do.
To ivanmmj
I guess by original I meant base 6.1 ROM but since there is not an official 6.1 base ROM for Herald I was just trying to figure out how the other cooks were able to get 6.1 in their releases so I could cook up my own 6.1 for me and possibly upload it for someone to test or use. But it's ok, you already answered that for me but maybe you can point me in the right direction. I've been hearing that a Kaiser 6.1 ROM is easy to port to the Herald. But let me know how you were able to port it. I read some of your tutorials and I'll definately give it a try as soon as I get the time. Possibly this Sunday or so.
baronmxc said:
To ivanmmj
I guess by original I meant base 6.1 ROM but since there is not an official 6.1 base ROM for Herald I was just trying to figure out how the other cooks were able to get 6.1 in their releases so I could cook up my own 6.1 for me and possibly upload it for someone to test or use. But it's ok, you already answered that for me but maybe you can point me in the right direction. I've been hearing that a Kaiser 6.1 ROM is easy to port to the Herald. But let me know how you were able to port it. I read some of your tutorials and I'll definately give it a try as soon as I get the time. Possibly this Sunday or so.
Click to expand...
Click to collapse
If you're looking for a bug free base, you might be better off just using one of my ROM as a base (since I tend to release the kitchen files for my ROMs.)
I have a post somewhere here about SYS and XIP porting. Find it and follow that. It works fine with kaiser ROMs.
Thanks! I don't know if I have tried your ROMs yet. I'll give it a go.
From what I have been able to gather (not very much) is that some ROM have their RGU files removed, making it imposible to Dump the ROM. When I try to open with the Package Tool nothing happens?
leapfrogg said:
Thanks! I don't know if I have tried your ROMs yet. I'll give it a go.
From what I have been able to gather (not very much) is that some ROM have their RGU files removed, making it imposible to Dump the ROM. When I try to open with the Package Tool nothing happens?
Click to expand...
Click to collapse
Actually, some ROMs are even encrypted...
In my case, all my ROMs are released WITH the kitchen files in case you want to make your own version. All that I ask is that you mention where the base came from since the base took a long time to make.
I don't know if this is the right place for this post.... and forgive my ignorance again.
I just can't get the Kitchen to work with any 6.1 ROM. I have tried JustMe and I follow exactly the same steps as with the original ROM. I just can't get a poputated OEM or SYS folder. What am I missing?
Leapfrogg
leapfrogg said:
I don't know if this is the right place for this post.... and forgive my ignorance again.
I just can't get the Kitchen to work with any 6.1 ROM. I have tried JustMe and I follow exactly the same steps as with the original ROM. I just can't get a poputated OEM or SYS folder. What am I missing?
Leapfrogg
Click to expand...
Click to collapse
Download the JustMe mini kitchen.
...Original rom?
There isnt a true original rom. Theres a base, which cannot be loaded on herald unless is ported with original 6.0 (which is ment for herald).
So. basically it looks like this:
Base 6.1 + Original 6.0 = herald 6.1
(original) (port)
you cant just use a base for a rom. you can port it, then extract what u want and dont want though (which theretically will turn yer ported 6.1 into an "original" one)
I managed to port a 6.1 rom following ivanmmj tutorial, quoted below.
" How to port a SYS folder
1. Open your old SYS folder and copy the .VM and WinCENLS_WWE folders into your new SYS folder
2. Go to your old SYS\Shell and copy shell32.exe and shellres.dll into your new SYS\Shell
3. Replace the old SYS folder with the new one. "
but I only did step 1 and did not do step 2. It worked and seems stable.
f1rick said:
I managed to port a 6.1 rom following ivanmmj tutorial, quoted below.
" How to port a SYS folder
1. Open your old SYS folder and copy the .VM and WinCENLS_WWE folders into your new SYS folder
2. Go to your old SYS\Shell and copy shell32.exe and shellres.dll into your new SYS\Shell
3. Replace the old SYS folder with the new one. "
but I only did step 1 and did not do step 2. It worked and seems stable.
Click to expand...
Click to collapse
The Shell32.exe doesn't always have to be ported, but if you port a ROM that comes with a different dpi, you need to use your old shell32.dll (unless you want to manually convert it into the proper DPI...)

HTC TYTN 2 update wm 6.5

can not for WM 6.5 HTC TyTN 2 TO INSTALL CAN SOMEONE PLEASE HELP ME?
selcuki said:
can not for WM 6.5 HTC TyTN 2 TO INSTALL CAN SOMEONE PLEASE HELP ME?
Click to expand...
Click to collapse
Sorry but do not understand what it is you want to do Does anyone else ???
selcuki said:
can not for WM 6.5 HTC TyTN 2 TO INSTALL CAN SOMEONE PLEASE HELP ME?
Click to expand...
Click to collapse
There is no official WM 6.5 update for the TyNT II. All the 6.5 roms you see on this site are cooked (unofficial ) roms. To use one of them read here:
http://forum.xda-developers.com/showthread.php?t=433835
Is there a list of things that 6.5 has that 6.1 doesn't? I didn't see anything about that in the wiki.
trjons said:
Is there a list of things that 6.5 has that 6.1 doesn't? I didn't see anything about that in the wiki.
Click to expand...
Click to collapse
Because there is no official 6.5 out yet we can only guess what will be i it but google it and you will have more of an idea
if you want to know about the wm 6.5 ,the link below might give you some idea !
http://forum.xda-developers.com/showthread.php?t=492001
souvath said:
if you want to know about the wm 6.5 ,the link below might give you some idea !
http://forum.xda-developers.com/showthread.php?t=492001
Click to expand...
Click to collapse
But again , anryl and josh are just using builds based on leaked beta versions of 6.5, not official versions or even official beta versions. M$ can only hope their final version is as cool as anryl's or josh's.
well just want to give him an idea what it look like
It's pretty with lots of sparkly lights and beautiful backgrounds. I have a feeling it will be a bit of a beast for the Kaiser when all is said and done. There are some really great roms out there though. Hyperdragon has a couple of them.
denco7 said:
But again , anryl and josh are just using builds based on leaked beta versions of 6.5, not official versions or even official beta versions. M$ can only hope their final version is as cool as anryl's or josh's.
Click to expand...
Click to collapse
If their roms are so cool, why are you using the PDA Ultimate rom? HUH??? J/K. I'm gonna flash Josh'd 21198 rom tonight
djquick said:
If their roms are so cool, why are you using the PDA Ultimate rom? HUH??? J/K. I'm gonna flash Josh'd 21198 rom tonight
Click to expand...
Click to collapse
I was one of the first guys to flash Josh's roms when he came here from Hermes, and have flashed and used every one since. Problem is I hate Titanium, and I love Manila. And Reza IMHO, does Manila better than anybody.
But that is not to say that I don't appreciate people ( josh and anryl ) who are the best at things I don't prefer.
I like the ROM I installed this morning
I spent all day yesterday getting educated. I read and read, and then I tried and I bricked my phone a few times. But because I kept reading, I finally figured out mskip's instructions on Flashing your First ROM. I love XDA developers, and I love my new ROM. Now that my TILT is unlocked, there's no limit to what I can load on it. A rom a day keeps the boredom away
lawmom90 said:
I spent all day yesterday getting educated. I read and read, and then I tried and I bricked my phone a few times. But because I kept reading, I finally figured out mskip's instructions on Flashing your First ROM. I love XDA developers, and I love my new ROM. Now that my TILT is unlocked, there's no limit to what I can load on it. A rom a day keeps the boredom away
Click to expand...
Click to collapse
Ah, another satisfied customer!!!! KNOWLEDGE IS POWER!!
Glad you managed it.
Closed thread as it is an old topic.
Dave

Categories

Resources