nerve braking problem...help - 8125, K-JAM, P4300, MDA Vario ROM Development

here is the deal guys....i have a wizard and i have flashed different roms...the problem is that somethin happened probably and every time i flash a rom, format me device....from the beginning the volume from its own goes on vibration.if i try to turn the volume on and than turn off and then on the screen only it goes in vibro again....does anybody know anything....thanks a zillion

it is highly recommended to flash original rom before flashing a custom rom

well i had same problem when i had amp rom what i did was go back to original imate kjam rom then flashed tnt rom
now working well...

Related

Another Paperweight, the story goes..

First it was spl 3.8. Was having trouble but could still work with the phone. Suddenly I became flashoholic. Just the same way as I flashed 50 times before, I was flashing. It all went ok. After that I'm stuck at the splash screen. Says, Format Failed. But can get into bootloader and flash roms. But that's all. No booting business.
Guess this is the end of the road, unless there is any solutiion. Any one out there?
IPL 2.20.001
SPL 3.08.001
Radio 2.47.21
OS 4.0.0.0.6 (was)
Now the mobiz step 1
i think i'm having a similiar problem with u..
flashed to SPL2.20. Everything ok..
after a few flashes, only thing i get now is the bootloader screen..
i can flash ROMs, RUU tells me its successful, but PDA just restarts and goes back to bootloader
Waaah :'( I have a most similar problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
I can go into bootloader, flash any wm5 roms without IPL SPL. But that is all. Unless we can find a way to unlock the cid and flashback the original dopod rom, we are stuck.
anyone??? I cant use my phone at all now :'( and I didn't even re-flash it... all was working fine I just DROPPED it on a CARPET no real shock and since then it's on the bootloader screen
In my oppinion you have to send it for repair... I think it's really a phisical damage...
really no progress..
i opened a thread in the WM6 area also...
seems to be stucked at bootloader no matter what i do..
tried every single ROM, tried reflashing radio rom, tried reflashing ipl/spl, tried every RUU available..
when u guys hard reset, does it say Format is Failed ?
ice_mouton, i'm something like you.. dropped it few weeks ago.. but it still ran fine.. upgraded to PDAVIET's 4.0.0.0.6 Touch.. had no problems for the first few days of use... suddenly it refused to reset and was stuck at vendor boot screen...

Jamin restart

I have a jamin i-mate and I have had to do a hard restart, ever since i have found that sometimes when my phone screen turns off it wont turn on (even with the power button) and my whole phone does a full reboot, I am running WM5, it has been suggested to me by a friend that i run a rom update. I am currently running rom version 2.13.9.23 WWE, dated 2/23/06.
I have heard the great risks of updating the rom and would like some advice on a rom that works and how to install it.

Hung Booting W/M...

I had radio 1.27.15.32 on my Phone with Dutty's DualTouch V4...
I wanted to try out Alex's v5 AT&T Rom... so I reflashed the radio on my phone to 1.27.14.09 it flashed successful, but now the phone hangs on the HTC Boot Logo Splash screen.
I noticed it does a pattern vibration, short-long, short-long, short-long.
Anyone got an idea on whats going on, and how I can fix it!
Edit: Did a hard reset, booted up to the os the first time, and I reset before customizations. Waiting to see if it boots up again.
Edit 2: It seems something is up with the video drivers. Because it stays hung at the htc screen, but active-sync can connect to it, hopefully, I can push the rom across, gotta wait a min, battery drained down to like 49%...
Edit 3: I was able to flash the rom... it appears that perhaps more than just the sound driver is stored in the radio...
Everything is back to normal...
Thanks,
Rich

[Q]

help please newbie in a panic installed custom rom (*updated* htc 2.1 rom) everything went fine until reboot it wont reboot seems to be trying vibrates every 30 seconds or so but nothing happening
What device model/phone do you have?
What Custom ROM did you flash?
Did you HardSPL your device prior to Flashing?
Did you alter your radio?
We can help you more if we know what we are dealing with here.

NS4G only working with AOKP

Hello folks, first post, hope you can help.
My phone has a very specific problem that happens with every rom BUT with AOKP.
When the phone is on idle it just gets stuck, black screen, button lights are on. Only thing to do is pull the battery out. It also happened with the stock rom, so I tried to unroot it and give it to sprint but they couldn't take it because of a small crack on the screen(been there forever).
I came back home and tried to flash it with a custom rom again, and recovery was broken, so I flashed recovery on the device 3 times before it started working again.
I randomly chose AOKP and it was working pretty well, although it slowed down lately a lot. I tried to install JB on it recently and the problem returned, so I tried CM9 again, CM10 even tried Bugless Beast, same thing. I keep going back to the backup I have of AOKP and it's the only one that doesn't crash my phone.
I've attached the phone information so you guys can see exactly which built I'm running.
Bump.
Please help me fix my phone, I'm really at loss how to solve this problem,
Do you turn deep idle on? If so that could be the problem......when u flash a new rom, as your setting everything up, make sure deep idle is turned off.....the option is under advanced in the cm roms .......hope that helps
10....0011....10101

Categories

Resources