I had radio 1.27.15.32 on my Phone with Dutty's DualTouch V4...
I wanted to try out Alex's v5 AT&T Rom... so I reflashed the radio on my phone to 1.27.14.09 it flashed successful, but now the phone hangs on the HTC Boot Logo Splash screen.
I noticed it does a pattern vibration, short-long, short-long, short-long.
Anyone got an idea on whats going on, and how I can fix it!
Edit: Did a hard reset, booted up to the os the first time, and I reset before customizations. Waiting to see if it boots up again.
Edit 2: It seems something is up with the video drivers. Because it stays hung at the htc screen, but active-sync can connect to it, hopefully, I can push the rom across, gotta wait a min, battery drained down to like 49%...
Edit 3: I was able to flash the rom... it appears that perhaps more than just the sound driver is stored in the radio...
Everything is back to normal...
Thanks,
Rich
Related
First it was spl 3.8. Was having trouble but could still work with the phone. Suddenly I became flashoholic. Just the same way as I flashed 50 times before, I was flashing. It all went ok. After that I'm stuck at the splash screen. Says, Format Failed. But can get into bootloader and flash roms. But that's all. No booting business.
Guess this is the end of the road, unless there is any solutiion. Any one out there?
IPL 2.20.001
SPL 3.08.001
Radio 2.47.21
OS 4.0.0.0.6 (was)
Now the mobiz step 1
i think i'm having a similiar problem with u..
flashed to SPL2.20. Everything ok..
after a few flashes, only thing i get now is the bootloader screen..
i can flash ROMs, RUU tells me its successful, but PDA just restarts and goes back to bootloader
Waaah :'( I have a most similar problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
I can go into bootloader, flash any wm5 roms without IPL SPL. But that is all. Unless we can find a way to unlock the cid and flashback the original dopod rom, we are stuck.
anyone??? I cant use my phone at all now :'( and I didn't even re-flash it... all was working fine I just DROPPED it on a CARPET no real shock and since then it's on the bootloader screen
In my oppinion you have to send it for repair... I think it's really a phisical damage...
really no progress..
i opened a thread in the WM6 area also...
seems to be stucked at bootloader no matter what i do..
tried every single ROM, tried reflashing radio rom, tried reflashing ipl/spl, tried every RUU available..
when u guys hard reset, does it say Format is Failed ?
ice_mouton, i'm something like you.. dropped it few weeks ago.. but it still ran fine.. upgraded to PDAVIET's 4.0.0.0.6 Touch.. had no problems for the first few days of use... suddenly it refused to reset and was stuck at vendor boot screen...
Hi everybody!
Been searching for this problem on google and on this forum, but i can't find an answer to this
It's like this that i've installed wm 6.5 on my prophet, everthing was fine!
The problem was when i was trying to install another keyboard layout it restarted, and then it got stuck at the "splash screen" with the Qtek logo.
I did an Hard SPL, nothing happened.
After that i tried to boot into bootloader, everything was fine, i saw the three color screen and i started to install a new clean copy of the WM 6.5..
Everything was fine, it went to 100%, but when it was at 100% the device shutdowns.
When i tried to start it again i got into the three color screen again, and after about 7 seconds it restarts, and it starts in the three color screen...
Please help me..
Please... I really want my phone to get back to normal...?
try to connect the USB and run WM5 Rom.
The same problem..
I have the same problem after try to flash rom to my 818pro.It's still reboot into 3-color screen.How can I do??
Try flash this rom: RUU_Prophet_220734_2207114_024721_NVID.exe
from: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Michal
hi i haw such a problem. bricked my desire, and need anny suggestions :/
it happened when i tryed to push a custom framework-res.apk i did it by pushing it throu adb. it was this one "smooth-sense-1.0-1.0c.zip" from desire section. and im using "Official" Froyo HTC Sense ROM 1.0c.
after i pushed it to my desire i rebooted it and everything seemed to be ok. device loaded but when came the screen to unlock it had some google errors and restarted to load screen and booted again to lock screen and so on and so on.
so i decided to wipe all data and reinstall "Official" Froyo HTC Sense ROM 1.0c. so i did it. everything seemed to be ok, i restarted my device, it started o load, loaded to boot screen, but thats all.
so i tryed to reinstal the same rom and radio :/ when i tryed to install radio device just shuted down.
after that my desire dount even loud up to boot screen, it only turns on to white screen with HTC letters on it, and restarts.
when i turn it with volume down it turns on to recovery. when i pick up recovery and pres power button to select it it turns to that screen with red !, but when i try to turn on recovery menu from my pc with recovery-windows.bat nothing happens :/
so thats my big problem, maybe anyone could help me with it? :/
i mannaged to turn my desire back on. now it runs on android 2.1-update1 rom.
but now there is no network connection, no sd card connection and no usb connection. anny sollutions?
and one more thing. :/ i cant turn off my desire. when i turn it off, phone turns back on again :/ when conncted to usb.
sounds like you've done the USB brick. check out the thread at modaco for a solution.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
that might help you.
fixed damn it took some nerves
Hi guys,
So i went to Romkitchen.org, and cooked a rom. now this is my first rom so i have never flashed one before. Now whats happening is that when i boot up my phone, everything seems fine. although there is a pixelated screen before the splash pops up. Now thats not the problem, the problem is that i cant do anything on my phone. whenever my phone is turned on, i can use it for like 5-6 seconds, and then the splash screen pops up again. And this keeps looping over and over again. i tried using that small window of time to factory reset, since it didnt reset when i flashed the rom for some reason. except when i try to reset it, the phone reboots. except it keeps on the AT&T screen. Same thing happens when i try to flash to rom with ROMmanager. Please help! im 13 so i cant afford a new phone, since i got this one with a contract. Oh by the way, My phone is the Samsung Captivate.
My TP2 (Sprint) battery went too low and turned off. After charging the battery, the phone just comes up to the Sprint splash screen (Yellow Sprint Symbol) and gives a little vibrate and reboots again. This goes on continuously till I pull the battery . I on am Stock Sprint WM6.1
I can enter into the bootloader screen. I have tried
1. Task 29s
2. Flashed a different radio.
3. Reflashed Stock 6.1 ROM again.
4. Hard Reset it a couple of times
My phone is HSPL unlocked in that I see *olinex 1.0 when I go into the bootloader.
I have tried flasing ROMS from both the SD card as well as from the PC. I cannot go past the green Win 6.1 screen .
I am out of ideas and would really appreciate it if anyone saw this signature previously or has any ideas as to how to solve this.
TIA
baikal2 said:
My TP2 (Sprint) battery went too low and turned off. After charging the battery, the phone just comes up to the Sprint splash screen (Yellow Sprint Symbol) and gives a little vibrate and reboots again. This goes on continuously till I pull the battery . I on am Stock Sprint WM6.1
I can enter into the bootloader screen. I have tried
1. Task 29s
2. Flashed a different radio.
3. Reflashed Stock 6.1 ROM again.
4. Hard Reset it a couple of times
My phone is HSPL unlocked in that I see *olinex 1.0 when I go into the bootloader.
I have tried flasing ROMS from both the SD card as well as from the PC. I cannot go past the green Win 6.1 screen .
I am out of ideas and would really appreciate it if anyone saw this signature previously or has any ideas as to how to solve this.
TIA
Click to expand...
Click to collapse
You could try re-locking the phone, installing the stock 6.5 rom, and then unlocking the phone again.
Also be sure to give it lots of time during the first boot (like do the install, and then leave to make dinner or something). There have been days where I though the phone had locked up, only to have it finish booting when I was about to pull the battery.
wizardknight said:
You could try re-locking the phone, installing the stock 6.5 rom, and then unlocking the phone again.
Also be sure to give it lots of time during the first boot (like do the install, and then leave to make dinner or something). There have been days where I though the phone had locked up, only to have it finish booting when I was about to pull the battery.
Click to expand...
Click to collapse
Wizard,
I ma noob and was wondering the need for relocking. Does it have any benefits as opposed to simply flashing WM 6.5 on to the phone. I have flashed WM 6.5 onto the phone and it goes all the way to the Orange screen(Preparing for activation or something like that with the progress bar) and then reboots again endlessly.
My hesitancy with re-locking comes from the fact that to unlock you need to be in a position to active sync and if the flash fails after the relock ,I might not be in a position to unlock again.
baikal2 said:
Wizard,
I ma noob and was wondering the need for relocking. Does it have any benefits as opposed to simply flashing WM 6.5 on to the phone. I have flashed WM 6.5 onto the phone and it goes all the way to the Orange screen(Preparing for activation or something like that with the progress bar) and then reboots again endlessly.
Click to expand...
Click to collapse
In rare cases re-locking and then re-unlocking resolves rom loading issues.
baikal2 said:
My hesitancy with re-locking comes from the fact that to unlock you need to be in a position to active sync and if the flash fails after the relock ,I might not be in a position to unlock again.
Click to expand...
Click to collapse
As your phone does not boot, I don't see why you are worried about it. You have nothing to lose. Your phone does not work now at all.
You can always flash a stock rom to a locked phone anyway. The only tool that would rule out is the task 29, and you already said that didn't work.
Either way I would try to load the stock wm 6.5 rom, and give it a very long time to finish loading before doing anything else first.
I have to echo WizardKnight's advice here... It seems crazy, but it fixed one of my dead TP2's. It wouldn't boot past the first white HTC screen, I never even got the OS screens to load...
I tried literally everything I could think of... for some reason relocking it revived it...