Hello folks, first post, hope you can help.
My phone has a very specific problem that happens with every rom BUT with AOKP.
When the phone is on idle it just gets stuck, black screen, button lights are on. Only thing to do is pull the battery out. It also happened with the stock rom, so I tried to unroot it and give it to sprint but they couldn't take it because of a small crack on the screen(been there forever).
I came back home and tried to flash it with a custom rom again, and recovery was broken, so I flashed recovery on the device 3 times before it started working again.
I randomly chose AOKP and it was working pretty well, although it slowed down lately a lot. I tried to install JB on it recently and the problem returned, so I tried CM9 again, CM10 even tried Bugless Beast, same thing. I keep going back to the backup I have of AOKP and it's the only one that doesn't crash my phone.
I've attached the phone information so you guys can see exactly which built I'm running.
Bump.
Please help me fix my phone, I'm really at loss how to solve this problem,
Do you turn deep idle on? If so that could be the problem......when u flash a new rom, as your setting everything up, make sure deep idle is turned off.....the option is under advanced in the cm roms .......hope that helps
10....0011....10101
Related
so i been trying constantly to install cm10 on my phone and i even tried some of the other roms based on it (pacman and JellyBam) but the phone loads fine and i get the the screen that sais to pick my language (obviously the first time i booted i got the "android is upgrading" stuff)
but on every rom i get like half way though the initial setup and my phone just shuts off but not actully off it just turn off the display and the keys but i cant do anything and i cannot turn back on without pulling the battery.
i managed once to get past the setup screen but then i got some FC's such as clock and keyboard. am i doing something wrong?
i upgraded from Stock GB and also tried from CM7 (stable) and also the cm7 works with the phone signal but every rom i flashed with cm10 i get no signal at all.
The solution is to install this: http://forum.xda-developers.com/showthread.php?t=2037287
Good luck.
xxvelorionxx said:
The solution is to install this: http://forum.xda-developers.com/showthread.php?t=2037287
Good luck.
Click to expand...
Click to collapse
o
how can we do that is the phone is rebooting ?
Greetings all, recently I have rooted and flashed Cyanogenmod 10.1 nightly to my GT-i9300 but a couple of days ago I started to get random reboot loops, the screen waking and sleeping on its own, etc. I tried flashing several other AOSP based roms such as AOKP and Carbon with no success. Today while I was in the car I noticed that if I just extremely lightly touch the power button it will function as it should, however if I press it normally it starts messing up again. I'm not sure if this is a problem with the 3.0 kernel of the roms I've flashed or if it's simply a faulty power button but I would like some enlightenment so I can make my phone usable again, cheers
Hey there.
whats the android version of your rom? 4.2 or 4.1?
i had almost the same problem with my S3 when i flashed a rom with android 4.2
it seems like on the 9300 the hardware isnt able to work properly with 4.2 8if i imagine this info correctly)
after wipe and installing 4.1 everything was fine again.
i hope this may help you
I installed a custom rom a few weeks back, and now am having problems with it.
When I attempt to turn it on, the boot animation won't even start before my phone decides to turn of and begin a constant vibration pattern.
I would connect to Odin and fix this, but when I load boot menu and the download screen, it does the same thing.
I was running Slimbean on android 4.0, then after having problems running that, I changed to Cyanogenmod. I then attempted to go back to stock because I was having problems with that too, and this is how I got to the problem I'm in.
Is there any way I can flash a rom without having to have the phone on? Anything I can do to fix this?
Thanks,
I think have bricked my Infuse! This is what happened:
I have been flexing different custom rom on my infuse 4g and the last one I flashed was AEON v1.4SL rom (so lovely:good. Now, am trying to go back to stock and I flashed this "SGH-I997_I997UCLB3_UC_ATT" through Odin but my infuse will always boot into stock recovery but the problem was fixed by flashing this "GTGs_Ultimate_Unbrick" and another problem arose; the phone will boot, and some messages will come up saying "com.google... is not responding, force close(button), Twh Launcher is not responding, force close(button) and so many pop up like that. At the same time, the phone back light will goes off and come on again and again with the "force close" messages. I flashed different stock roms like "I997UCKI4" "GTGs_Ultimate_Unbrick " SGH-I997_I997UCLB3_UC_ATT" again and again thinking its gonna fix the problem but still the same. I also flashed "ODIN-Entropy_DD-GB-zImage" Red recovery on Gingerbread stock rom, flashed custom rom through the red recovery and the custom rom would never boot finish but vibrate (sign of booting almost done!) with a dim back light and remain there forever.
I just hope someone could help me!
Am so sorry the long story. Thanks in advance.
Hi guys, I know, is a very old device, but even without IMEI (I buy knowing this problem) is a very useful device for me, it has working very nice with an ics rom.
lets go to the my problem now. I try to put an newest rom (cm13), not work, and now no more rom work, all comes with the same issue: after in the welcome screen, he freezes and shutdown.
I googled a lot, read many threads, tryed many procedures, with cwm, twrp, odin, pray for "the old gods and the new ones" with no luck.
tryed stock, cm10, cm11, cm12 and cm13 (I lost the cm9 and can´t find it)
the battery is charging ok, no warm abnormally, the heat on device is normal too, and the power button is working as expected.
I appreciate your help
http://forum.xda-developers.com/showthread.php?t=2176593