Hello,
since there's no WM5/6 for magician - is there at least a tool to skin the menu-bar at the bottom of the screen (for every program) ?
make it look and/or act like WM5/6 ? or at least look different than 2003 ?
freeware ?
thank you.
Yes, it should be very good if anyone know/have program for that (or reg work?)
Related
Hi All,
My friend has just bought a Wizard and I noticed that it has a nice little device lock application on the home screen. Does anyone know where I can get this little app
for my XDA II running WM 2003 SE?
Cheers,
Richard.
Is it possible to rip this app from the WM 2005 Wizard ROM somehow?
I checked one of the EXT_ROM images I found but couldn't see anything obvious
in there. Could it be built into the main ROM perhaps?
cheers,
Richard.
We tried before to find the file responsible for this utility, so we could be able to bind it to a hardbutton and take it off the todayscreen, but no luck. No-one knows what file is responsible for this app. sorry guys.
the registry points to "shutil.dll" - I suppose this is a fairly generic shell utilities DLL, but as there is no further 'entry point' data in the registry, just hooking that up as a Today item should automatically provide the required data ? Unless it polls an additional DLL, of course, but a resource explorer check of that DLL (if you can copy it) should be able to point any of that out?
several programs I downloaded do not work on my
MDA. When talking to support of these programs, I am always asked what screen and processor I have, AND what model is my MDA,
Vario, ???? The Invoice description is HTC KIT MDA VSW Can somone enlighten me? Also, what is the processor, ARM?
Does anyone know of a program which works to clean up unused Icons. I had such program on iPaq6315 from Kai Developer
Thanks !
dont know which from that mate but if you have a look at the site index and match it too the pics(that show each device) maybe
Go to Settings->System-Device Info->Identity then compare the Model No. with the table in the wiki - http://wiki.xda-developers.com/index.php?pagename=HTC_PhoneModels
thanks !
it show Model WIZA200 which I then ID on the provided link as MDA Vario
Now all I need is a cleaning program which works with OMAP850 Processor !
I really do not understand what you mean by "unused icons" perhaps you should try a firmware upgrade or put a post in the Wizard forum.
Good luck,
I mean Icons in the Programs Page etc which still are there although
I uninstalled the program. Also some Programs do not show in the
"Remove Program" list but still show on the "Programs" screen
Can't you just browse from your PC and delete them then ?
unfortunately not, I get sharing violations on each of the programs
I want to delete (but are no longer listed in the "remove" screen)...
Hi kg09!
Try MemMaid. It has a lot of functions for cleaning memory.
Also if you still have the app from your iPaq it should work. The OMAP processor has the same ARM command set, which in plain English means that as far as regular apps are concerned the only difference is speed.
(Only utilities like overclocking are dependent on the specific processor type)
Thanks a LOT, levenum - this program seems to what I need
(the ipaq programs I have are not WM5 and trying some of those was what cluttered up my MDA) KG09
Hi,
This is probably a no, (and i've searched for this already btw but not found anything), but....
Is it possible to launch a different application other than the touch cube when you slide your thumb up the screen ?
thanks in advance
Matt
Yes it is, but not with the normal TouchFlo. Search for FTouchFlo, it does basically the same, but you can assign any command to each direction of sliding your finger over the screen.
That means four different possibilities.
Don't know if this helps, but you can try this thread:
http://forum.xda-developers.com/showthread.php?p=1971424
Note that VJBrisk is basically just a tiny app I made to allow you to replace one executable (eg BioTouch.exe), with VJBrisk, and VJBrisk will allow you to launch a shortcut with parameters.
You may well not need to do that step, depending on your needs. The thread above explains this much better than my mumblings.
V
cheers chaps, will take a look at these.
I had hoped it was as simple as a registry change but guess not
thanks
Matt
Use UltimateLauncher, and get rid of TouchFLO Cube. It also lets you assign functions to run any .EXE or .LNK to swipes in all 4 directions. That's what I did. But I only use Up and Down. Up to get open my contacts and down to invoke the S2U2 screen lock.
I've decided to go with vjbrisk which is working very well at the moment.
however, even with show all files I am unable to fine either LaunchStartupApp.lst or Launchstartupapp in the windows file. Am using a polaris (o2 orbit 2)...any ideas where I can find this or if it's called anything else.
It's not the end of the world, would just be useful to free up 5mb or so.
cheers
Matt
Hi to all,
I'd like to install the original keyboard (usable with the stylus) present on WM6.5 original rom. Can anyone help me to find the cab?
sometimes it's very useful because it leave more room for the background application
Thanks
tistian
I need the same!
Are you looking for the stylus keyboard present on devices prior to the Pro 2? If yes, then I have been searching for the same. I have recently found a registry edit to get it to work. Currently testing. Shall let you know if it works.
I'm look forword it
Thanks
Bump! Bump! Bump!
BumpingBumping
When you guys talk of "stylus" keyboard, are you ref. to the tiny querty keaybord seen in windows mobile 6.1?
Yes, that's what we want. I am currently having a HD2 TOUS being delivered to me and I am waiting for it.
In advance, I am reseraching my tinkering options with this device. I still have my old yet enduring Himalaya by hand. I'll try and see if I can do some tweaks by copying files from my Himalaya to Leo. Will post updates if I am successful.
I found the solution. Please bump if anyone is interested, as I have lost the links and sources and it will be tedious to me to find and re-credit my sources.
However, should you want to do it yourself, the solution is basically finding the right keys that correspond to the old keyboard you want (i.e. Keyboard, Block Recognizer, Handwriting recognizer) under HKCR\CLSID and changing the data of the value of key "IsSipInputMethod" to 1, then downloading SIPChange to select that keyboard. You need SIPChange as it is the only way to select the keyboard without HTC Input taking over.
Hi,
I have possibly a stupid question about the taskbar of WM6.5.
Recently I changed to a PDA (without phone) with Windows Mobile 6.5 classic.
I'm missing the "X" in the taskbar to quit or terminate applications. A friend owns
also a device (different as my unit) with WM6.5 , but he gets the X.
I'm a bit confused.
Some applications which basically work, but do not offer an Exit/QUIT/Cancel
/Back/etc. button, can not be terminated anymore. Just with the task manager
I'm able to quit these application or parts of it. It's very annoying and it
prevents to run these applications if they need a setup which than can never be left.
Does anybody know the reason why my device does not offer the "X", but
others do ? Can I change anything to get it ?
Thank you very much.
Regards
Robert