I am running Dr. Martin Gonzos Windows Mobile 6.1 v1.1 on my Vox and have got myself Tom Tom Navigator 6.030 with GPS driver v1.20 installed.
The problem is that I am trying to connect my new Holox BT-541 GPS receiver to my Vox but I'm having difficulties.
I can connect the device with bluetooth OK, but after reading some posts I also have to specify a COM port. Here lies the problem. When I try to add one the options are greyed out.
Is there something else I have to enable/do first? Or have I bought a dodgy GPS?
Please let me know if you need any more info as a resolution to this dilemma would be grately appreciated.
Thanks in advance
/cerb
Related
Hi
Some help please, I have a xda 2, tom tom navigations software and a haicom 204e gps, i can not get the tom tom navigator to see the gps unit i have all the leads and the red led stays on i tried the gps on a laptop with a usb cable works fine, i don,t know which port to connect to ie com 1, 4, 5 etc and which things in the xda to turn on or off, as you can see i am a beginner to this, thanks for any help!!!!!
Onesongrg
Go to settings/connections/beams and uncheck the box, in tomtom choose com 1, nmea 4800.
Thanks mate worked a treat!!!!! :lol: :lol: :lol:
SameProblem?!
Hello!
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
I've an Haicom HI-202E GPS-Mouse,
the MDA II :wink:
a soldering iron...
and a 5V Powersupply in my adapter (consists of 2 USB ports connected to each other, powersupplied with an 7805 (2A))
How can i fix it?
Thanks!
Re: SameProblem?!
Nobody0815 said:
I'm a newbee... i want to connect a GPS 4TomTom to the USB Port.
So i don't really know, how to connect the MDA II to the USB GPS-Mouse.
I've taken an USB cable, that could charge the MDA II and build a adapter to connect the cable and the GPS Mouse in it. It won't work. I've think so already, but i've read it anywhere in the www.
So, could anybody help me with the Problem?
Click to expand...
Click to collapse
I'm not 100% sure, but i think, that wouldn't work.
The USB Specifications says that USB requires one master device to controll the slave devices. Your PC is the master device and the mda is just an slave. You won't be able to get 2 slaves talking to each other without a master.....
Stefan
cant the MDA work as an Master?
I've heard it so. But I'm not shure.
Some people gets a external HDD working on other PDA's.
I'll look and think about, but i've never found anithing an web for thet problem/solution. :roll:
I've wondered that nobody wants to connect more on the PDA...
I mean 20Gig HDD may be nice in Holliday to listen music :wink:
the tomtom software for PPC's will enable under "GPS-status - GPS" the options to select a protocol/GPS-Mouse and the connection:
Ir
BT on com6
serial on com1
com9
.
.
Serial on USB
Bluetooth GPS
so, i thought it will
Thanks for more...
Found this in another thread:
Julian Thompson said:
Yes, this is right. The XDA2 won't function as a USB host. You do need that backpack and a www.ratocsystems.com host card. Then it will work.
I know this becuase I'm trying to link mine up to a HDD to store loads of music in my car and use the PPC as a controller but I don't want the confounded backpack - for you though on the motorbike, only using it when you need it it sounds perfect.
Click to expand...
Click to collapse
and you can also take a look at this long thread:
http://forum.xda-developers.com/viewtopic.php?t=8799
Stefan
Hi
I have an xda 1 & am trying to get the gps to work. I have a Haicom hi204s gps receiver & a (ic-xda-ht for 02 xda tmoble ) cable for the car.
The software I am using is tom tom 3 ver 3.02
I have turned the beam off
My settings for the gps page are Haicom GPS + com1
I am at a loss !!
Rgds
Tan
@nobody: THE MDA can ony act as slave.
BUT: For GPS you ony need a serial port. And after all USB IS a serial type of port.
Only thing you need to do is solder a cable that connects the +5v, ground, Tx and Rx of the GPS USB connector to the appropiate pins of the MDA connector . . . .
On one of the german forums (cant remember the name :-( )there is a memeber nicked 'mocki' that offers custom built cables.
Tanman, choose nmea 4800 and com 1. Make sure beams are off and also that you dont have a keyboard driver loaded. Go to the gps screen in tomtom and see if there is any bars showing for satellites. If this doesnt work or gives an error let me know.
Hi cruisin-thru
Worked a treat
what I could not find at first was 'nmea 4800' which was the name of the sat receiver
Nice one thanx a lot
Tan
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
cruisin-thru said:
Tanman, that is actually the protocol used by the receiver rather than the name/model. Glad its sorted for you.
Click to expand...
Click to collapse
:?: :?:
So what you're saying is that, asl ong as the hardware is compatible with NMEA, we can use this generic driver with the correct baud spreed ?
Yes
Had to send my early XDA11 back to O2 for repair and it came back empty and they upgraded the ROM(?) Re-installed Tom tom loads so slowly its unusable. Memory map navigator loads ok but takes 5 seconds to react to a screentap. Also, it can bond with Holux bluetooth GPS but cant see it in Tom tom wizard. It all worked fine before they got their hands on it.
This sounds to me like you have the wrong com port chosen for your gps. Remove bonds for any bluetooth, reset, then rebond the gps, it should ask if you wish to use the serial profile for the device, answer yes to this. I think gps should then be on com5.
Thanks for your help
Thanks for that. When I get to select serial profile I only get Com 7 offered. Com7 is not offered in Tom tom GPS setup. Previously I had "Holux on Com4" as a choice. I have no Bluetooth manager program as on the Ipaq but I have loaded BTHTools1100 from April04. Can I check Com port status somehow? Maybe old stuff is assigned to the serial port I need?
We have lift-off!
Unticked Com 4 as incoming Bluetooth port in Bluetooth settings. Now have "Hollux 230 on Com 7" as an option in tom tom GPS setup.
KeithR: IF your on ROM version 1.72 now, you better skip the BTH Tools.
Un-install them or do a hard-reset (yes, once more).
Just bond the GPS, select YES to create a com port.
The GPS will then communicate thru COM5
Assign COM5 in TomTom (and one of the NMEA protocols).
It will work then as expected.
BUT: Since you have a Holux GPS you miight encounbter the same slowness when starting TomTom and the GPS is not 'connected'(ie off or out-of-reach). This is an issue specifically for the combination Himalaya (or MS BT Stackin the ROM) and (some?) Holux and D-Connex BT GPS's.
It seems that this last issue is solved in WM2003 SE, but that seems less stable to me . . .
Thanks all
Now its running ok I'm going to leave it alone. (I doubt.) I'm tempted to get an XDAIIs to use with broadband and VPN at home but the MDAIII seems much cheaper. Thanks again, I'll check this site for info on it.
Hi,
I'm hoping someone out there will be kind enough to help and solve this problem before I rip all my hair out!!!
I've installed tomtom (V5.00) on my mda pro, but I can't get it to recognise my bluetooth gps receiver.
I've set up a bluetooth partnership with an outgoing COM port. My MDA allows me to choose COM0 ,COM4,COM8
When I select other Bluetooth device from Tom Tom configuration, it gives me the options:
QCT Data Interface
Serial Cable on COM1
COM7
RIL on COM6
Infrared Port
Ir on COM3
I can't seem to align the software and the bluetooth to get it working correctly. Please help
Update your application to at least version 5,21 to get this working, have a look at http://www.tomtom.com/support/index.php?Language=1&FID=3361 for the software - Mike
Apart from the 5.21 and above (current is 6.03) software requirement, many users also have to set a COM port your MDA offers you (i.e. COM0) manually in the navigator.cfg (or was it .dat, don´t remember,try) file where the COM is stored that TT is using. Just change to navigator.txt, edit and change back to .cfg Good luck.
Hi guys,
Recently I bought Imate 8502. Everything works fine. I have installed tomtom 6.01 for wm6 (which works fine on my other htc p3600i)
Now problem in in Imate 8502 when i go in to the settings>External GPS>Hardware... it shows me "gps Hardware port "(none)". If I select any port and press ok and open it again, again it shows "(none)" in gps hardware port. So whts wrong with that.
Also tomtom is not working in Imate 8502. in tomtom software setting doesn't show gps port.(like in htc p3600i gps settings shows that gps in com9). I tried too much to solve this problem but got failure and failure. So I am asking help from any expert here.
Please help me.. I want to run GPS software in Imate 8502
Thanks in advance
1. u need to turn on gps manually
2. u need GPSgate
Thanks
Thanks netnerd,
well i turned it on manually as well but same things happens ?
by the way how does gpsgate will help in this problem? I have no idea of this software.. Though i have downloaded demo but I am not getting this software
thanks bro !!
waiting for your reply
tomtom cant see your build-in gps port
GPSgate will make a virtual gps comm port that gps programs able to see
Need Some knowledge
Dear Chintak i also have an 8502 but still serching for upgrade as u said u upgraded it with tomtom it realy works and how is the procedure to upgrade
will appriciate help .
hi ayesha,
I didn't upgraded anything in imate, I just installed tomtom for ppc.
but tomtom can't read gps port so m looking for another option
OK - hope this helps some....
I have the I-mate 8502, and TomTom 6 running fine.
Things I did:
- Installed TomTom...
- Went to Wireless Manager and enabled GPS. These are my GPS settings by tab (can get to them via Wireless Manager):
>Programs: GPS program port - COM9 (default setting
>Hardware: No GPS port specifed (not needed) and baud rate 4800 (again not needed) - these are default settings
>Access: Manage GPS automatically is checked (again default)
The only setup in TomTom was to set the GPS device to the IMEA option.
TomTom should see the device, but display a message that no gps satellites found or it searching. It usually takes a couple of minutes for the GPS to pass through satellite information to TomTom first time but it then works great.
Running the Telstra WM6 Rom
I followed Rathalian's instructions and it worked perfectly for me too.
I did have to select COM9 as the COM Port of the GPS device in Tom Tom Configuration.
I am also using a Telstra WM6 ROM.
Thanks everybody its working now thank you very much everyone
i-mate 8502: Anybody sells display or phone? /alguién vende pantalla o teléfono?
Good afternoon, folks
I was relatively happy with my i-mate ultimate 8502 till I dropped it and the display broke.
As I'm against buying new stuff if you can at a reasonable price fix something, I'm asking:
is anybody willing to sell almost altrusistically a display or even the whole phone? We could do it through the normal channels (paypal, google, ebay,whatever). Or in person, I'me based in Spain.
Warm regards,
Manuel
I've search the forum and could not find the answer.. here is the question
I just got a imate 8502 and it turns out that I need a serial over usb driver for the windows. It's not included on the cd that came with the phone neither it's available on imate website. Does anybody know, or faced the same problem and found a fix or a work around? Imate is running WM 6.1 and my laptop is running winxp with service pack 2. I tried it on another computer which is running windows vista ultimate and I get the same result. Any help on this matter would be greatly appreciated.
cheers
the only thing that should be needed is activesync free from microsoft
Verify USB to PC synch settings to make sure "Enable advanced network functionality" box is ticked.